 Show Posts
|
|
Pages: « 1 [2] 3 4 »
|
|
I made a good set up for my two vega 56@64,i get 2350 hash each, but my pc lag, stuck when I do anything even when I move mouse, I use red team miner, the amd mem tweak tool, win 10 pro 64,drivers 19.4.1,19.42.
|
|
|
|
|
Weird that nobody don't talk about Pascal Coin, it's way better than other coins, with a ryzen 1700 can make 0.50 usd per day without power...
|
|
|
|
IF You have an on-board video device or a non AMD card in your system you will get those errors. The GUI is based off of Overdrive N Tool code. As a result it will ONLY work with an all AMD environment. I am not sure if Eliovp has a solution to that particular issue, so for now as you get to test and run your settings be sure to disable your onboard adapter and run your system with 2 cards, 1 to view your screen and the 2nd to test and configure your settings. ALSO A MUST HAVE this link https://www.overclock.net/attachments/47806That is the R_timings program you need. You will also need the Polaris BIOS tool. You can then read the BIOS and get the timing straps and use Power shell to convert that timing to the appropriate settings. There are a few things that are incorrect in the GUI. Such as the following: Under the CAS Timing. - tR2R is actually TCCDS / tCCLD is actually TCCDL In your timings settings you will NOT get an RAS setting. In your timings settings you do not need to configure ALL the settings you can simply configure the RMG Timing, CAS timing, RAS timing, Misc Timing, and Dram Timings. You will also note that on the bottom right there is a Timing level setting. Default (0) - will get you 18 to 20 mhs Level 1 - 21 to 25 mhs Level 2 - 27 to 30 mhs SO you will want to set your timing level to 2. As for your memory and core settings that is what you nomrally configure I am still tweaking. I was able to get 29.921 Mhs with 2300 / 900 / 1175 / 900 I did get a share but it locked up after 10 min. I am still working on settings but i wanted to take the time to respond to your question and post an update to my findings this evening. Thank you! I had made a good set up for my two vega 56@64 and I got 2200 hash,but when I restart windos show that message error,so I go back to srb miner and profiles,but I get about 2160 hash,i have only two vegas and not another gpu like onboard,i think is a windows bug,i cant understand that erroe,i format pc a week before, I use 18.5.1 driver,because I I use 19.4.1 or newer one card gives only half power,another bug I think.yesterday I was happy because I did 2250+ with my vega this tool and red team,but after restart everything lost. |
|
|
|
I mean every time I press receive the number of wallet address change... Or I make rong?
Yes. But every old address stays valid forever. They change after every transaction for privacy reasons. But you can receive any amount of coins, to any address, at any time. All addresses on your wallet can be used multiple times. OK, thanks, I am waiting for the transaction to confirm... |
|
|
|
I worried because I send two transaction in the same receive address I think or I don't remember well, is it possible?
Two transactions to the same address? Absolutely. There is no limit of transactions/coins an address can receive. I could spend a whole year sending 1 BTC per day to your address. I mean every time I press receive the number of wallet address change... Or I make rong? |
|
|
|
I Sen two transactions to my electrum wallet the first confirmed, but the second I think has stuck as for about an hour is still to uncorfimed. What to do?
Wait. The mempool spiked again: https://jochen-hoenicke.de/queue/#1,24hLet it clear and your tx will get confirmed. I worried because I send two transaction in the same receive address I think or I don't remember well, is it possible? |
|
|
|
|
I Sen two transactions to my electrum wallet the first confirmed, but the second I think has stuck as for about an hour is still to uncorfimed. What to do?
|
|
|
|
Same trm 0.4.3 works better for me
When I said the same, someone said that I want to make a statement, I did not answer, but as you mentioned it, I will say what I have done so far. The truth is that due to lack of time I have not managed to run the tool, but I did a lot of testing. What I understand is that the 4.4 version is doing more, but finding the right driver and maybe a fresh installation of the windows. Trying one of the last drivers would be a better choice. A two-computer holder, on one I managed to catch 2150 hash, in both 56 @ 64 Vegas, I did not do much on the other computer on both 64s because one did not go over 1000 hash, that's from me. I will come back when I finally find time to use this wonderful tool, I came peacefully, with thirst for help and learning. Thanks again to the founder and those who help. I willI donate to the founder. Something last 2,5% fee to teamredminer is 2200x2,5÷100=55 hash? So it's fee? |
|
|
|
|
Red team miner 4.3 gives a better hash, which driver to use?
|
|
|
|
Grate tool, thanks, but my 4 vega crash after while, I wonder what to use in pstates? Maby there is the fault? [https://ibb.co/qrXvT7d]  Voltages are way higher than all of my vegas. Maybe drop your core down. But that shouldn't be the problem at that voltage Maybe heat is the issue. Or memory tweak options you have don't work with your cards. Are all cards.the same? It's 2 vega 56@64 reference watercool and 2 vega 64,asus,nitro,samsung memory all. I try lower settings than eviolp suggest but for some reason my rigs crash after while, I make changes on the fly, is it possible to crash from this? I use srb miner, Iam confused what's fault. Don't use srb miner theres your fault. Use team red miner 4.4 they are about 10-15 higher hashrate. They are the best public CN miner. Lowest power consumption also After two attempts with team red miner I got one crash and one dead gpu. |
|
|
|
Grate tool, thanks, but my 4 vega crash after while, I wonder what to use in pstates? Maby there is the fault? [https://ibb.co/qrXvT7d] Voltages are way higher than all of my vegas. Maybe drop your core down. But that shouldn't be the problem at that voltage Maybe heat is the issue. Or memory tweak options you have don't work with your cards. Are all cards.the same? It's 2 vega 56@64 reference watercool and 2 vega 64,asus,nitro,samsung memory all. I try lower settings than eviolp suggest but for some reason my rigs crash after while, I make changes on the fly, is it possible to crash from this? I use srb miner, Iam confused what's fault. |
|
|
|
Grate tool, thanks, but my 4 vega crash after while, I wonder what to use in pstates? Maby there is the fault? [https://ibb.co/qrXvT7d] |
|
|
|
|
For the noobs, could somebody explain the steps?
Exe don't open, do I have to create a bat file? Explain please....
|
|
|
|
|
I don't see my miner online in nanopool with srb miner,how can I configure it to see my worker online?
|
|
|
|
|
which miner to use for amd gpus mining and bitforex ?
|
|
|
|
|
Hi, can I mine to win 10 with vega 64,how much $? per day? Is there a wallet or I have to mine to exchange?
|
|
|
|
|
Finally i found solution, how to mine and play some games simultaneously! I found two ways, one from device manager, where i can disable the gpu where Will play the games. The second way comes from srb miner Who is a great tool, if i press 0-9 while mining i can disable-enable gpus! So i start miner, disable the card with my display port or hdmi or whatever and i play games! I had crashes in first time, but i had to set driver ppt again....
|
|
|
|
|
Somebody could post a conf file for 2 vega?
|
|
|
|
|
I mine monero with 3 gpus, with srb miner, but i want to delete one to play some games, Is It possible to happen in srb miner?
|
|
|
|
|
