Show Posts
|
Pages: « 1 [2] 3 4 »
|
I used for t9+ but not connect to pool and burn 17 asic😭
Hi, sorry to hear that you are having issues, the first firmware deployer is for S9 and T9+, the last update was posted for the user which wanted to try a different firmware.. Perhaps I should start a new thread to avoid this kind of missunderstandings
|
|
|
Hi Alex, do you have an update?
Hi, yes, please send me the firmware which was working for you and will send you a patching file containing that firmware.
|
|
|
Hi Alex, I have problems with s9i 14 TH. The temp chip comme to 99 and 100. Before the update, the temperature is 72 to 74. I restore bmminer.conf, *.cgi files and bmminer executable and the s9 come to 72. Did you have this problems with S9i?
Thanks a lot!
Hi, there have been some issues with newer miners than the source code available on github. I am working now on a version which is going to be compatible with any miner version, including the latest so called "asic boost" low power firmware which is just released. From what I understand it might be no time soon source code available, so I have found a workaround on setting frequency, voltage and will try disabling fans as well. I am still trying to figure if there's any asic boost at all in the latest firmware or if it's better power management combined with different algorithm of communication with the pool.. Anways, will keep you updated. Unfortunately I will be charging for the next firmware update because of the complexity of the task. Join discord to stay updated : https://discord.gg/VugHH8Alex
|
|
|
I knew chips were thin I thought they were a bit taller but if that thin I think setting it up with your cnc to do a pass may work better.
Yes, it's tricky business, but it can be done.
|
|
|
I linked a blank plate and better sanding products.
Where are you located I have a good friend in the brooklyn navy yard he has a wood working shop he reminds me of you.
I understand what you are saying, trouble is that the template needs to be very fine to do that as the chips have only 1mm thickness.. and you won't be getting them through the template to sand. But I got your point. I am from Romania, a bit East from Brooklyn .
|
|
|
Good work gave you 3 merits.
Thank you for the merits! Thanks also for the suggestion on the youtube video. What I was thinking is to make such a template on my cnc machine to hold the board perfectly straight then program the CNC to go over each IC and make it perfectly smooth. This will require a few days to get it right, but will allow saving a lot of time and make perfect job in the end. Maybe will do in the future and make a video of the process as well.
|
|
|
Hey guys, I recorded a video of my process of installing the waterblocks on the Antminer S9 board. Check it out and let me know your opinion, if you have questions post them on this thread. https://www.youtube.com/watch?v=RU2ueuEW6cMGood luck!
|
|
|
Hi, I finally managed to get an S9! and I tried your mod, and for the S9 it works perfectly (I only recover the files)! play well;)
The only downside, the reporter's temperature seems much higher than the reality ... and moreover the fan-fixed operation has been removed?
in my test, I also flash firware S9J on my S9 13.5, and pushing the minor on the frequencies, the kernel displays voltage - 454? at take it will seem that it runs under 900mv I pence, and rises very easily at 16Th;) But this is only for information;)
|
|
|
If we were, we could work on some liquid-cooled S9s together Thank you for the tutorial, it got me started with editing the firmware once you showed how to compile it. You can see how useful it was by the fact that I downloaded it as reference. Cool, glad it helped.
|
|
|
I re-uploaded the tutorial to dailymotion for you guys. Enjoy!
That's you in the tutorial Tim?, because you must be my twin brother then, you look and speek a lot like me. Edit: I actually saw you credited me at the begining of the post. , nevermind, you're not my twin brother.
|
|
|
I think the problem is windows 7 not having some libraries to load this. This script is made with python and compiled, it contains all the libraries needed to run ssh commands and python it's self, which is about 7-8 MB, that's how python gets compiled to run as an .exe .
We plan making this in a different language in case we decide to make this in the end a project to focus on, it will be smaller in size when done in c# or c++.
You can also try running this as Administrator, see if it's doing any difference. Will install a VM in the following days to test on other windows versions, as I am working with win10 and it's where it's compiled on.
|
|
|
I would suggest trying in a more friendly path location, without xxx spaces and others. And run the .bat file after setting the config file. You can place it in D:/bmminer-deploy or something like this, see if you still get an error.
Which windows you run it ? I work with windows 10.
|
|
|
yes;) it's already what I did:
Before i connection only hashboard for test
1 - remove original Bmminer 2 - copy Bmminer-T9 + 3 - rename to bmminer 3 - Attribution of the right attribute 4 - replace minerConfiguration.cgi 5 - delete from minerConfiguration2.cgi (if in doubt) 6 - in page configuration, modified the value and apply
and after you know more ...
In my newer version I added a set_miner_conf.cgi to setup the extra veriables I added to turn off or on voltage setting, that must be added otherwise it will not write properly the config file. There are some files which you did not copy/set. I am not going over the entire logic of the tool, as the purpose is not to teach others to program or how to make their own tools for this. This bmminer file is made to include new interface variables. If you want your own bmminer, stripped of the interface stuff, you can use the video to build a bmminer and set things inside bmminer then build every time you want to change a value. Hope it makes sense. Spend a little more time with this if you want to do it your own way then in 1-2 days can post your solution, we are crowding this topic already.
|
|
|
it's more than 3 months that my T9 + turn at about 12.5Ths without problem, I had tweak this minor since long time: p
so I prayed the Bmminer T9 + that I copy on my minor, I also gave him the right to know rwxr-xr-x ...
I do not see where the mistake is ... anyway it is absolutely necessary to execute your deployer? Did I miss something ?
I must recognize that the possibility of changing the tension of your bmminer greatly interests me: p
Do a search on youtube for my video where I show to build the bmminer and how to install it, I am not sure if I am allowed to post youtube links on this forum, but you should be able to find it easy enough. The tool was made for mass deploy, so for 1 machine I guess is not really needed if you know what you are doing. It's helpful to learn anyway what needs to be done. I guess you renamed bmminer_t9+ to bmminer . Also, you can try with one board if you are unsure of your results, maybe you have a different T9+ miner, who knows.
|
|
|
Thank you I know lol I'm not at my test shot on the minor, I'm also in hardware! on your tweak, i did not run the "bmminer-deploy.exe" but i just copy the "bmminer-t9 +" and "minerconfiguration" on my minor, i got the config page, i take 700mhz and 870mv ... But that did not work, I took care not to use the bmminer-S9 but beautiful and well the T9 + bmminer;) not sure what to say, I did that tool to avoid doing this kind of support because there are some steps which must be followed when copying these files, permissions set etc. Someone on my discord channel got it overclocked to 13.7 using same files, also had issues before using the deploy tool. The guy on discord used 750 frequency, but temp was 100 deg, a bit to much I would say. Let me know if you manage to do it, I am sure you would find a way eventually if you don't want to use my tool.
|
|
|
I tested this for T9+!!! but ... i'm sorry, big problem, PIC SW error see :
[...]
i restored my board with my PicKit3
Hi, It seems that you did not read nor the post nor the read me file. You deployed with the config left for S9. I plan to add a check for the miner version and choose bmminer automatically, but I will implement that when I have some free time. For now you open config.txt and for minerversion type T9+
Great! so, if I understand correctly, can not change the voltage via this BMMINER for T9 + but only the ratio "voltage / freq" has been changed?
in addition, your BMMINER for T9 + thus brings the freq control, and the deactivation of the fan check?
I'm just going to take the BMMINER and the configuration page and test all that to see how it's done;)
Hi, no, you can change voltage and freq independently, you just need to be more careful with the readme files delivered with this kind of scripts. Good luck!
|
|
|
Alex, thanks for providing this to the BTC Talk community.
Hi, You are welcome! let me know if you find any problems while using it.
|
|
|
looking great! is the T9 available yet? cat it oc as well to 14TH?
Hi, I am still running stability tests of the bmminer, I don't think running at 14 TH/s will be ok for T9+ with regular cooling, so far I run it for 2 days on 12.3 TH/s with a freq of 675 . With 675 MHz it stays at 83 Chip temp, which is resonable. I did not do any consuming tests, as this is not usually my thing to do, the clients tune their machine by their environment, hashing rate required, wattage etc. I will post an upgrade soon which will include T9+ firmware and a config to switch between which miner you want to deploy.
|
|
|
Hi,
It's just one minerConfiguration.cgi in the package because there are 2 files the same, but with different name. I replace both files on the miner.
For T9+, I tested and foltage setting works fine. I set it to 675 mhz and 920 mv for now to see how it holds. I think 930 or 940 is the hardware limit set on the pic as well as on the s9.
Will post an update to this thread when it's live.
|
|
|
|