Absolutely, we got and Sample unit few days ago and couldn't get nowhere near 3500w @200ths.
Power usage 3800-3900w.
Best Efficiency got on low power mode 160 th/s @ 2600w what is 16.4 j/ths which very efficient

A New Benchmark in Efficiency and Performance
The crypto mining landscape is continuously evolving, with technological advancements leading the charge. A prime example of this innovation is the Jasminer X16-P, an Ethash ASIC miner that is redefining efficiency and power in the mining world. Our recent experience with a sample device from Jasminer revealed a remarkable performance that exceeds its initial specifications. The unit achieved an impressive 6000 MH/s at 1800W, surpassing the previously advertised 5800 MH/s at 1900W. This translates to a substantial 10% increase in performance upon delivery, setting a new standard in the mining industry.
Ethash Mining: Diversified Opportunities
The Jasminer X16-P’s capability extends beyond just Ethereum Classic (ETC), as it can mine a variety of Ethash coins, including Zilliqa (ZIL). As of 2024, some of the most popular Ethash coins include Ethereum Classic (ETC), known for its significant market cap and daily emission of coins​​.

Balancing Noise, Efficiency, and Power
While the Jasminer X16-P offers outstanding efficiency and power, it’s important to note that the unit is slightly noisier than initially advertised, operating at around 60 dB compared to the initially stated 40 dB. However, this noise level can vary depending on the miner’s mode and the ambient temperature, as hotter chips will cause the fans to run at higher speeds. The miner provides flexibility with different mining modes such as Balance, Efficient, and Performance, along with various overclocking settings to meet specific needs.


Comparing Jasminer X16-P with Other Models
The Jasminer line also includes the X16-Q model, offering 1960 MH/s at 600W, demonstrating Jasminer’s commitment to quality and efficiency. However, these models come with a higher price tag compared to competitors like the Bitmain Antminer E9 Pro, which delivers 3680 MH/s at 2200W. For those with lower electricity costs (below 10 cents per kWh), the Bitmain E9 Pro might offer a faster return on investment, generating approximately $10.5 USD daily in mining revenue. In contrast, the Jasminer X16-P, though quieter and more suitable for higher electricity cost environments, generates around $17 USD daily.

Investment Considerations: High Risk but High Reward
Investing in ASIC miners like the Jasminer X16-P carries inherent risks, particularly due to the limited number of large-market-cap Ethash coins available for mining. The two largest options are Ethereum Classic, with a $2.9 billion market cap and daily emissions valued at $325,000 USD, and Zilliqa, with a $400 million market cap. This limited scope highlights the high-risk nature of such investments.
Jasminer: Focused on the Retail Miner
Jasminer’s focus on the retail miner market is evident in the quality and practicality of its products, suitable for use at home or in an office setting. However, potential buyers should be aware of production and delivery challenges. The company has faced difficulties meeting production targets and has experienced delays in the past. The next batch of the Jasminer X16-P is scheduled for release at the end of February, but delays are possible.

Conclusion
The Jasminer X16-P stands out as a powerful and efficient option in the world of Ethash ASIC mining, suited for those prioritizing efficiency and lower noise levels. While the investment is high-risk, the potential rewards are significant, especially for those in environments with higher electricity costs. As with any investment in the volatile world of cryptocurrency, potential buyers should conduct thorough research and consider their specific circumstances before making a decision.

https://www.youtube.com/watch?v=2oqjiXYlpGU

Yes cannot really review the S21 yet as havent received it

Unveiling the Efficiency King: Whatsminer M60S
In the dynamic world of cryptocurrency mining, efficiency and quality are paramount. The Whatsminer M60S, the latest Bitcoin ASIC miner from MicroBT, is making waves as one of the most efficient and well-built miners in the market today. With Bitcoin’s staggering 190% price increase last year and the lucrative rewards from BRC-20 transactions, the M60S stands out as an optimal choice for both new miners and those looking to upgrade their mining farms.
Advanced Technology and Build Quality
Built on the newest chip technology, the Whatsminer M60S boasts remarkable efficiency, making it a top contender in the world of Bitcoin mining hardware. The superior build quality, as attested by numerous customer testimonials, ensures reliability and longevity – key factors when considering the operational lifespan of mining hardware.
The Silicon Lottery: A Range of Models
Whatsminer offers a range of models based on the ‘silicon lottery’, where some variants deliver slightly higher efficiency and performance. Notably, the M60S includes an option for immersion cooling, enhancing its operational capabilities and durability.

Focused Review: The 186 TH/s Whatsminer M60S Model
Our focus today is on the 186 TH/s model of the Whatsminer M60S. This model not only meets but exceeds its advertised efficiency, delivering stable performance of 191-192 TH/s at 3500W. This translates to an efficiency of 18.22 J/TH, a commendable feat for an air-cooled ASIC miner.

Setting Up the Miner
Setting up the M60S is straightforward, akin to most ASIC miners. The initial step involves locating the miner’s IP address, for which we recommend the Advanced IP Scanner (download here). Upon accessing the miner via its IP address, use the default login credentials (username: admin, password: admin). Then, simply navigate to the miner configuration tab to insert your pool address and worker ID. For our review, we’re using the ViaBTC mining pool.
Performance Insights
After a few hours of operation, the M60S consistently performed at 191-192 TH/s. The chips’ temperature, though on the higher side, remained within acceptable limits, peaking at 80°C in a 10°C ambient environment. The pool’s recorded hash rate aligns with the miner’s panel, indicating accurate and reliable performance metrics.
Price vs. Quality: A Balanced Perspective
While the Whatsminer M60S comes with a higher price tag compared to Bitmain’s Antminer S21 (200 TH/s version), it compensates with its superior build quality. This factor is crucial for minimizing downtime and potential extra costs associated with warranty repairs. Although not the most cost-effective in terms of price per TH/s, the M60S is undeniably one of the most efficient air-cooled ASIC miners currently available for Bitcoin.

Conclusion: A Worthwhile Investment for Serious Miners
In conclusion, the Whatsminer M60S may not be the cheapest option, but its efficiency, build quality, and performance make it a compelling choice for serious miners. Its ability to operate efficiently and reliably could mean fewer disruptions and lower long-term costs, making it an
excellent investment for those looking to make a significant impact in the Bitcoin mining scene.
https://www.youtube.com/watch?v=onlmQ_HRGgs

certainly high risk miner , sometimes mining shitcoins could made you outsmarted everyone .....only if you are lucky.

These still seems to be quite demanded devices, factory cannot meet production targets , new batches availible now in only February.
And the worst part prices keeps increasing.

When venturing into the world of cryptocurrency mining, choosing the right ASIC miner is crucial. This review focuses on the WindMiner K9, a Kaspa miner that promised much but delivered little, and contrasts it with more reliable alternatives like the Antminer KS3 and Iceriver KS3M.
A Closer Look at the WindMiner K9
Specifications: The WindMiner K9 was launched in November 2023, boasting a hash rate of 10.5 Th/s and a power consumption of 3300 W. It featured four fans, a voltage range of 165 to 300 Volts, and measured 305 x 185 x 290 mm, weighing 14800 g​​.

User Experience and Build Quality: My experience with the WindMiner K9 was fraught with issues from the outset. Not only did the hashing boards fail upon receipt, but the build quality was remarkably poor. The machine’s power supply was dislodged, most likely during shipping, due to inadequate packaging. Additionally, the hashing boards were not properly secured in their rails, raising serious concerns about the overall assembly quality.

Interface and Usability: Further complicating its use, the WindMiner K9 comes with a GUI that seems outdated, reminiscent of last century’s technology. The included tutorial, written in Chinese, does little to aid non-Mandarin speakers, making the setup process even more challenging.

Trustworthy Alternatives
Given these significant shortcomings, let’s explore more reliable options:

Antminer KS3: A trusted name in the ASIC mining world, the Antminer KS3 offers a stable and efficient mining experience. Its reputation for quality and reliability makes it a far safer choice than the WindMiner K9.

Iceriver KS3M: The Iceriver KS3M, while having its own minor issues, stands out for its overall decent quality. With a relatively low issue rate of about 4-5%, it proves to be a more reliable option compared to the WindMiner K9’s 100% failure rate.

Conclusion
The WindMiner K9’s combination of hardware failures, outdated interface, and poor build quality make it a risky choice for anyone serious about cryptocurrency mining. In contrast, the Antminer KS3 and Iceriver KS3M offer more reliable and user-friendly experiences. Investing in ASIC mining equipment is a significant decision, and it’s imperative to choose machines that not only promise high performance but also deliver reliability and ease of use.

Video : https://youtu.be/hy911YmDMb8?si=zWnb1rYPfJdin4zo


WEBSITE | INSTAGRAM | TELEGRAM | TWITTER | YOUTUBE

Karlsen is the GPU mining life-support

More less yes , this is not the only firmware out there , because stock power usage in 2800w and there is room to increase performance without doing additional customization.
They are as efficient as the Antminer S19XP , but the price on these much higher.

Introduction: In the dynamic world of cryptocurrency mining, staying ahead with the latest technology is crucial. For enthusiasts and professionals using the Antminer S19K Pro, there’s exciting news. The LuxOS firmware upgrade promises a remarkable boost in hash rate performance – up to 50%! This blog post dives deep into the installation process, tailored settings, and performance metrics of LuxOS on Antminer S19K Pro, ensuring you harness its full potential.

What is LuxOS Firmware? LuxOS firmware is a specialized operating system designed to enhance the performance of ASIC miners. For the Antminer S19K Pro, LuxOS offers a significant increase in hash rate efficiency. It’s a game-changer for miners looking to optimize their hardware’s output.

Signup to LuxorOS Pool HERE.

Installation: A Tailored Approach The installation process for LuxOS varies based on the type of control board in your Antminer S19K Pro.

Xilinx Board Installation:
If your Antminer has a Xilinx board, the process is straightforward. Simply install LuxOS on a microSD card using a tool like Etcher.
Insert the microSD card into the Xilinx board’s slot. Upon booting, the LuxOS firmware will be operational.
Amlogic Board Installation:
For miners with an Amlogic board, there are two paths:
Using Lux Commander: This tool allows remote installation of the firmware. However, access to this software requires a specific key.
Board Replacement: Alternatively, you can replace the Amlogic board with a Xilinx board and then use the microSD card method.
At MineShop.eu, our test miner with an Amlogic board was upgraded remotely using the Lux Commander software. However, we have experience with both methods.



Performance Testing and Results: We conducted extensive testing on LuxOS with different settings to measure performance gains.

Default Overclock Setting:
Frequency: 645 MHz
Voltage: 13.9V
Performance: 134 TH/s at 3200W
Efficiency: Calculate the efficiency in joules per terahash (J/TH).
Enhanced Setting:
Frequency: 720 MHz
Voltage: 14.2V
Performance: 149 TH/s at 3800W
Efficiency: Calculate J/TH.
Maximum Performance Test:
Frequency: 795 MHz
Voltage: 14.5V
Performance: 164 TH/s at 4400W
Efficiency: Calculate J/TH.
Antminer S19K Pro current profitability you can check here.

Conclusion: Upgrading to LuxOS firmware on the Antminer S19K Pro is a strategic move for miners seeking to maximize their equipment’s efficiency and output. Whether you have a Xilinx or Amlogic board, the installation process is manageable, and the performance gains are significant. Dive into the world of enhanced crypto mining with LuxOS and experience a new level of productivity.
Video here : https://youtu.be/F7isKeVk8_M?si=siHkNP43Z78KpRnS

📦 First Look: IceRiver KS0 Pro 200gh/s
We recently got our hands on the IceRiver KS0 Pro, a new ASIC miner for Kaspa Coin. Let’s explore what makes this miner stand out.

🔍 Design: Sleek and Efficient
The KS0 Pro looks similar to its predecessor, but it’s much more powerful. It boasts a mining power of 200 GH/s, doubling the performance of the original KS0.

🎁 Inside the Box
The package includes:

The KS0 Pro miner.
A strong power supply unit.
An EU socket power adapter.
A 120 mm cooling fan(not included in box but mandatory) to keep the miner cool, especially important since this version is overclocked for better performance.
🛠 Easy Setup
Setting up is simple. The power supply can handle up to 120 watts. Connect the cooling fan via USB, add the network cable, and you’re all set.


🚀 Surpassing Expectations
When we connected the KS0 Pro to a mining pool, it performed even better than advertised. It consistently hit 210 GH/s at just 90 watts. Chip temperatures stayed around 50-60°C, showing great heat management.

🏠 Quiet and Perfect for Any Space
What’s really impressive is how quiet the KS0 Pro is. It’s perfect for home or office use and doesn’t use much power, making it economical for long-term mining.

💰 Kaspa Coin Mining: Worth Your Investment
Kaspa Coin is gaining traction, and the KS0 Pro is a great tool for both new and experienced miners. Its efficiency and low noise make it ideal for residential mining. Currently mining 6usd worth of KASPA coins.

🌟 Our Verdict
After extensive testing, we believe the KS0 Pro is a smart choice for anyone interested in crypto mining. It’s powerful, efficient, and quiet, making it suitable for various environments. As Kaspa Coin grows, the KS0 Pro is your key to getting involved in this exciting market.

Stay tuned for more on the latest in crypto mining. The IceRiver KS0 Pro isn’t just a miner; it’s your gateway to efficient and accessible cryptocurrency mining. 🚀🔥🌐

This sample Iceriver KS0 Pro 200Gh/s is currently mining and you can follow the mining performance in LIVE HERE.
https://youtu.be/5KD3yKa6ouM?si=TbrQj2xGKg_ZVK82

There is better opportunities of investing for sure, but the beauty about it none of them are guaranteed . 

Is the Antminer S19K Pro Mining at Advertised Rates? ✅
After rigorously testing for over few days, I can confirm it’s churning out an average of 120 to 122 terahash. Quite impressive and efficient, especially when pitted against giants like the S21. Let’s dive into why the S19K Pro might just be the mining juggernaut you’re looking for.

Power Efficiency and Real-World Performance 💡
While the S19K Pro devours more power than advertised (by about 100 Watts) 23j /ths, it’s a small price for the efficiency it offers. Remember, your mileage may vary based on your local climate since these miners can be quite sensitive to ambient temperatures.

Comparing Antminers: S19K Pro vs. S21 🥊
Before the much-anticipated Bitcoin halving, one might ponder whether to invest in the S19K Pro or wait for the new kid on the block, the Antminer S21. Priced at 1799euro, the S19K Pro seems like a steal compared to the S21’s hefty tag of $3,499 listed on mineshop.eu.

The halving will slash rewards from 6.25 to 3.125 BTC, which means efficiency and cost per terahash are more crucial than ever. Although the S21 is projected to be more efficient, the S19K Pro allows you to start mining immediately, providing a potential head start before the halving reshuffles the profitability deck. 🕒💰

Potential Firmware Upgrades 🔄
The stock firmware works fine, but there’s buzz about specialized firmware that could boost efficiency even further. Stay tuned for a follow-up review where I’ll delve into Luxor’s firmware, promising improved thermal design and potentially longer lifespan for the miner. 🛠️

Mining Profitability: The Numbers Game 🧮
Right now, the profitability hovers around break-even, especially for home miners with higher electricity costs. However, buying mining hardware during bear markets can be a strategic move, allowing you to mine and hold crypto, banking on future price increases. 📈

Final Thoughts: Is the Antminer S19K Pro Worth It? 🤔
While the S19K Pro is no walk in the park price-wise, it’s competitively priced against the efficiency it brings to the table. As the halving approaches, remember the golden rule: Buy hardware when it’s less profitable, mine and hold the coins, then sell the hardware during the bull run. 🐂

In the game of hashes and watts, the Antminer S19K Pro is a solid player, giving you the flexibility to mine now rather than wait for future models. So, if you’re ready to tackle the halving head-on, the S19K Pro might just be your ace in the hole. 🎩✨
Full post here .

Yes love the competition, will be reporting live from this event
Whatsminer machines are very reliable and stable.
Even same performance as bitmain S21 generation same specs and cheaper price would put them in better position.

this 100% is targeted for retails.
People keeping miner as a heater in office/home etc..

Bitmain website prices (almost) always will be higher, they sell miners trough sales channels cheaper price. And they have flash deals usualy during the China working hours.

They test the devices 100% before they shipped, how long only Bitmain knows. I called premine ....ha
Seems bit overpriced curently, but the specs are quite nice.

Correct C19 socket

We have sold good few , but not nearly not as much as the Kaspa miners. Problem with Jasminer X-16 they also have manufacturing issue, shortage of the chip supplies, late deliveries etc..

Yes was there myself also , launch price 14usd per TH/s which seems decent availible till october 7 , downside is minimum order of 6000 machines.
Price goes up for preorder to 19 usd per TH/s after october 7.