Show Posts
|
Pages: « 1 [2] 3 »
|
has anyone had any success with solo mining?
ive used the same settings ive always used when i solo mine and it seems theres not getwork working
|
|
|
Some Benchmarks: RX 480 @1330 ~ 18 MH/s MSI Radeon 380 4G ~6,5-7 MH/s 2x Opteron 6380 ~1,2 MH/s R7 1800X@stock ~0,9 MH/s
Is there a an better optimized miner better than the linked one available for Radeons?
what drivers/OS are you using to het the rx 480s working? the miner cannot see them for me
|
|
|
Can anyone help out.
setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100 sgminer.exe -k skunkhash -o stratum+tcp://sigt.suprnova.cc:7106 -u vguard.3 -p x -I 16 pause
i get the following error
cldevicesnum returned error, no gpus available all devices disabled, cannot mine!
Ive been mining chc and eth with no issue
amd rx 580s 8gb
remove all setx lines, and try it, here is works, and also try to change -I to the your sweet spot (mine is at 20) tried that too no luck, what OS are you using and drivers?
|
|
|
Can anyone help out.
setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100 sgminer.exe -k skunkhash -o stratum+tcp://sigt.suprnova.cc:7106 -u vguard.3 -p x -I 16 pause
i get the following error
cldevicesnum returned error, no gpus available all devices disabled, cannot mine!
Ive been mining chc and eth with no issue
amd rx 580s 8gb
I got the same issue, my nvidia's are running fine but my 480s/580s nothing.. i even tried adding gpu platform with no luck
|
|
|
Can anyone help out.
setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100 sgminer.exe -k skunkhash -o stratum+tcp://sigt.suprnova.cc:7106 -u vguard.3 -p x -I 16 pause
i get the following error
cldevicesnum returned error, no gpus available all devices disabled, cannot mine!
Ive been mining chc and eth with no issue
amd rx 580s 8gb
|
|
|
i got about 45 gpus i can point to this coin would it be worth me doing it solo or should i just join a pool now?
Pool. thx, anyone got a config for amd gpu's i got the nvidias working well
|
|
|
i got about 45 gpus i can point to this coin would it be worth me doing it solo or should i just join a pool now?
|
|
|
still worth solo mining???
|
|
|
i asked them in skype do they have footage of these stated hashrates and this was their reply
"The chip has passed the verification and the machine is on the way"
so from that i gather they have got not real proof of the miner being able to perform what they stated if they have just tested the "chip"
|
|
|
Looks like they are desperate now. minimum order dropped to 1 unit (clearly shows that there isn't enough takers on 3 units)
|
|
|
Guys just to give you a reminder of what kind of company we are dealing with here!!!
announcement in 2015 A4 Dominator ASIC & Miner Specifications:
A4 ASIC: 3Mhs per chip at 3.6W nominal, support DCDC less PCB Extreme Low Power: daisy chained ASIC running at 0.7V, only in 14nm Miner Performance: 600Mhs from 720W at the Wall or 850Mhs from 1020W PSU Requirements: common PCI-E 8Pins/6+2Pins with 12V output Included: Raspberry Pi running the most user friendly A2 terminator Software
Actual Specs after release A4 Miner Specifications: Part Number: INNOSILICON A4 Dominator 280Mhs per unit (+-10% performance, can be over-clocked at user's risk) Size: Length 28cm * Width 26cm * Height 13cm Gross Weight: 9.2KG (without PSU) ASIC: A4, 80pcs Blade: 4pcs Voltage: +12V Required rated PSU: 1000W or above, 4 * PCI-E 6Pin Included: Raspberry Pi, it is plug and play with your PSU
seems they blow alot of smoke up their own asses.
So if you take that into account my guess is these miners are going to produce 15-20ghs, That is unless i see some video proof of them hashing at their specs
|
|
|
how many coins for a masternodE?
|
|
|
Dear Mr. Clay, when the MORE hashrate for ngreedia cards update will be available? Can you make optimisations for 1080ti? It is a lovely card hashing at 37.5 eth and almost 1000mh/s pascal. But I believe it can do better. Please Pleaseeee *bursts in tears* i too am curious when the nvidia update will be available to this miner is there a way to mine just alt coins for now with claymore? as i amd losing nearly 5mhs per gpu if i cant mine ether with update
|
|
|
using claymore dual mining i get 22.5mhs
solo with new enhanced ethminer 25mhs
using ASUS dual oc 6gb
|
|
|
if you use ribbons they need to have the additional power attached to them so you dont burn out the pci slot on the motherboard.
they usb risers are better in the fact they can be sat somewhere else other than directly above the mobo plus the circuitry is better than just the ribbons themselves less chance or burning stuff out
|
|
|
Ok so I have 2 x gtx 970s and 2 x gtx 1060s. Windows 10 how can I possibly run all four at the same time? They use two different video drivers?
I'm a newb but to my knowledge you can't. I started with a 970 and got it hashing 19 MH/s but was unable to use it and the 1070s I started buying. I only have 10xx series cards in my windows machine now. My Linux rig runs 1070s, 1060s and 1 970s all without any trouble however I cannot figure out how to overclock the 970 in Linux so its running around 18.5 MH/s. But at least its running and I can control the fan speed. The 10xx series cards all overclock via server-x settings without any problem What are you using to overclock 10xx cards in Linux and what hash rate are you getting with that? Are you putting things in xorg.conf that you can share or are you changing in the GUI nvidia-settings? I changed in the GUI, but it didn't have any effect. Or are you executing on the command line? Hi I also have 2X1070 8GB and 1X 970 in my Rig. the 2 1070 makes 29MH/s while the 970 only makes 2.3MH/s Is there any solution? Windows 10 64bit, latest Nvidia driver. Claymore's 9.6 Thank You I have the same issue , i also tried etherminer and it did hash very slow for GTX 970 , ! my titans never worked on windows 10, dropped to win 7 and all good
|
|
|
Any1 else having issues with seeds not connecting to the scrypt url???
|
|
|
In b4 100th page!! Congrats lol
|
|
|
Kinda wish I bought for gaw instead of Zeus now
|
|
|
|