My kilowatt wall meter said around 150w or 170w stock. I'm not too good at undervolting so I used the wattman auto undervolt template to get to 150w. doesn't seem to effect the hashrate too bad. the memory clock can be increased to raise the hashrate to 1750h/s but the watts gets around to 230w at that point
Use the Afterburner instead, enable voltage control and you can start to play with undervolting and OC. Are you sure that you adjusted only memory clocks? Higher memory clocks will need some extra power, but definitely not 80W more...
|
|
|
Looks pretty good.
How much power?
My Vega 56 do 1800 each but are fairly power hungry.
He said 150W at wall. GPU-Z can't probably measure much more, it not even shows clocks. They added RX 5700 only preliminary. Could you post more details maybe config? I've added your post to OP. Thx. BTW Afterburner can set RX 5700 voltages, so if you didn't play with voltages already, you can do it with that. https://www.guru3d.com/files-details/msi-afterburner-beta-download.html
|
|
|
what i don't get is why cryptonight/gpu from ryocoin works, whats the difference? i mean, i have to start xmrstak in low priority and the mouse freezes every 2 seconds for a half, but that could be the driver...
The mouse freezing problem is probably driver issue. You should reinstall it.
|
|
|
If you can modify the xmrig-amd for the pool Please PM and give the price. Thanks. What? You want to modify Cryptonight miner for Ethereum? What is the point of it? It is pretty much clueless.
|
|
|
great thanks. have a rig of 4 580 and 4 gtx 960, wanna swap the GTX with RX 5xx never was fan of nvidia cards.
what's the hashrate are you getting with RX580? can't get miner to go above 700 (XMR).
You need bios mod at least the classic free timings https://github.com/IndeedMiners/PBE-Polaris-Bios-Editor-1.7.2RX 580 and 590 will work together much better than with 960. Also don't forget to switch cards to compute workload.
|
|
|
is it possible to have a rig with R580 and RX 590? does it work under the same miner?
Yes, it works like a charm. Just install the latest Adrenaline drivers. Yes it works,it is the same as having a rig with Nvidia and ATI cards but keep in mind that the best performance of a mining rig is always when you use the same version of Gpu with the same driver so you minimize drivers conflicts this way.
That is completely different case...
|
|
|
Oh sorry, Hynix memory go only 30.6-30.7..
There are many Hynix memory types. According to hashrate I would say you have H5GQ8H24MJ or H5GC8H24MJ if you used PBE 1.6 or 1.7 for modding. There is still room for improvement with better timings.
|
|
|
That is true for pcie 3.0 and below but im talking about the newest 4.0 as it has a different power requirement and there are reports of it not working at lower speeds with some bios. it's something that needs to be fleshed out over time.
I didn't know that 4.0 is not backward compatible... that's bad.
|
|
|
Hello guys, i ask you for help, my gpu rx 580 special edition blue, in simpleminimg with a bios mod the maximum speed is 30.6-30.8, is it possible to find a better bios? or is it the cause of memory? the other card memories arrive at 31.5 without problems, thanks to all
What memory types?
|
|
|
PCI-E 4 isn't compatible with current GPU risers. Some people have been able to mess with BIOS and get them working by changing them to pcie 3.0 speeds, but not all mobos work like this. So plug the GPUs directly into the mobo 16x Slot to utilize it and even then you wont see any mining improvements.
PCI-E are backward compatible so you can run cards even on 1.1. Which lot of miners did on older mobos to get 6 and more cards running back then. Every mining mobo and most of the newer mobos have option to set PCI-E version.
|
|
|
I would like to know how did you count this income? No way to earn 50 USD per month with old i3 i7 and a GTX 1060... Maybe when you have 4 of them.
|
|
|
tested on 5700xt Algo: normalv4 1 min avg: 231 H/s 5 min avg: 206 H/s Max Speed: 866 H/s
|
|
|
Zní to dobře, určitě na to později mrknu, ale jen tak letem světem to máte ve špatné sekci, musíte to přehodit do Tokenů, když je to ERC20.
|
|
|
Claymore overwrites BIOS mod timings, so theres really no need for both
So it uses timings database and applies from that? If so, than it's not worth to use both, only memory tweaker and modded bios.
|
|
|
Hello, it´s time for me to buy some perfect modded bios in yor shop. sometime ago i saw some special mod for 30$ for eg. saphire 470 (nitro, mining, 4gb, 8Gb...) now i can "only" find the ones for 5$ - i missed something and second: one of my friend uses the last Claymore ETH and 19..... AMD driver, Stock Bios and 31.5 Hash for 470 Sap. Nitro 8Gb- what do you think is best to do now for me with these cards ? your modded bios plus... some people get 33, 34 and more hash Best regards All 5 USD and 30 USD are still there, none of them were deleted and no price change. You can use both modded bios and Claymore tweaks. I don't use Claymore, but as far as I know the timings changes Claymore provides didn't make much difference for bios made with PBE 3 Pro, but it is probably different for each card and memory type. If you want to buy modded bios for 30 USD you better buy PBE 3 Pro, with the discount coupon posted few posts up you can buy it for almost same price and you can mod how many bios you want. If you have any further questions about mining-bios.eu shop or PBE 3 Pro feel free to send me an e-mail. If you can get almost 32MH/s with Claymore and stable it's not worth paying anything... PBE 3 Pro and older versions was always meant for easy and very fast bios modding, it still need some fine tuning (clocks, voltages) anyway. With Eliovp tool you can also fine tune the timings to be even better if you know how. Yeah that's cause Bios mods are a lot less valuable now that Eliovp has open sourced his powerplay tables mod that changes memory timings on the fly. And then claymore went ahead and incorporated them into his miners too.
No price changes. You can use both modded bios and memory tweaker to get better results.
|
|
|
|