Can I just say that this is the best thing to happen to the D3 since the D3 itself? @Blissz any chance of an L3+ mod? 1.5% of L3+ profits will be more, just saying  he do not own L3+ so he cant do it |
|
|
|
Hello Friends,
I have the same problem - hashboard cannot be recognized from the Control IO Board. I read all posts here but can not understand where is this PIC and where is this EEPROM? On the hashboard I have 6 hole and I think that is for programming. Where can I get the pinout?
The hashboard is L3+ and the controller with firmware for L3+.
Please guys witch have experience with fixing of this problem on L3+ to write the procedure to resolve this problem.
Best Regards
hi, did you try the firmware method ? manually write pic is delicate |
|
|
|
|
why the map not working once we are logged in on geocoin.cash ?
|
|
|
|
i receive mine today , it s best compare to baikal , silent , fast boot, webinterface is very nice and confortable , lot of options. this is my 1st baikal and damm for xvg pool i see that today to , and may be we have to create one ,because zpool is the only one left but its peer to peer , and 15% hide fees , so you wont get that profit we need a pool only mining that not p2p , if i have time i will see to create one and test. |
|
|
|
|
please , speak about other projet on a new topic
ps : for sure it s a fake
|
|
|
|
|
if you can't wrote correctly the name of the Algo .. how can it be taken with serious ... that s a shame seriously
|
|
|
|
you cant think about that cause difficulty will rise a lot ... profit wont be so much ... |
|
|
|
|
Had hexa files on 1st post for people want to manually flash
thanks to martin_fryc for sharing it
|
|
|
|
This is very strange. After flashing with PICkit all 6 badly flashed boards were working perfectly, it has nothing to do with the controller AFAIK.
One thing to notice, there are 2 different types of PIC chips, one has more memory, might the issue be in this direction? They are mixed in even one L+3 device, so random,
seems some boards get logs like, and generaly flashing after a bit less than 5 minutes and other this one seem cant be flashed with the FIX2 |
|
|
|
i think you didnt have the same error than people flash bad firmware ... this cant force flashing pics , or blissz fix have flash all your boards may be , i will try this firmware , but i m sure that wont change , but thanks for your try*  |
|
|
|
It's confirmed guys ! I have 4/4 working hashboard as usual . Just connect all hashboards to another working L3+ , and flash the stock firmware.  ------ Under Device Family of PICkit , what do you pick to export the right HEX ? I was able to flash the 4th board by hooking up to another hashboard in my other L3+ using stock firmware , and then reflash only the 4th board. But still stuck with 3/4 hashboard . I planned to swap the 4th board with a working board from other miner , will update soon if I can have 4/4 . PICkit is more likely to solve this Best regards what you say make no sense , i change the controle board by a new one and try to flash firmware , hashboards was still down ... i have 2 working ont my l3+ and connect the 2 other and try flash stock firmware and they are not all working. |
|
|
|
whats the magic spell ? so it s flashing sometime when you have Blisssz: Chain not found 0 Blisssz: Chain not found 1 ? have only 2 working ... i try to flash again and again  |
|
|
|
|
tried to extract hex of hte working board , with pickit3 with MPLAB IPE , the pic OF L3+ is PIC16F1705
But i cant read it :s
Target device was not found (could not detect target voltage VDD). You must connect to a target device to use PICkit 3.
2017-12-13 13:41:38 +0100 - Read failed
|
|
|
|
Did you put your own pool and username back in?
You do realize that you are giving your hashes to cryptotore. Right?
Lol thanks im not so newbie And there is better 6000rpm fans , the liwer frequency and voltage help for low temp |
|
|
|
Can anyone tell me if after having used the Blissz firmware, is it still possible to replace the defective board by sending it to the bitmain?
It's that with some faulty ones, but I used his firmware.  how could they find out? tehy just get the boards with the asic's and not the control board  or am i wrong? right if you send only hashboard. @festim dont mining on antpool ... darkside @mkmfins ... yep probably burn some of ... lower frequency for long life ... worst default (way) of humanity -> "Ever want more". if everyone go to 400Mhz , we all get more profit cause difficulty lowering and watts to :s but it s a dream i think And for some people asking if mods will come for L3+ or S9 , i m following this thread & dev since begining , and if i'm right : Blissz do not have those miners , so it's impossible to have some test to mod it unfortunalty for us ... i just connect one S9 it 's like ... euh ... plane reactor in my living  and if some of you have break one or want to donate for the time to create mod , i 'm sure it's welcome My question is because I'm from Brazil, so I send that shit back to them to fix it, I'm going to spend more money, I'm going to risk having to pay more for customs, it's too complicated ... So my doubt on whether I can continue to use this faulty board, trying to put the Mhz and Low frequency ... But if I send only the bad cards to BitMain, I can send them without fear that they know I put the Blissz firmware, right? You will pay delivery send ,and custom, not return delivery , they ask for low custom i think you can ask the same to. ask them before send exact value they will write, and add some math. d3 could have profit with actuality and futur assets , but took lot of time on exchange and by reading. anyway its your choice , dont forget you can send it in USA for warranty, but normaly bad asic show xxx. may be try reset firmware with button , could have a result |
|
|
|
|
very nice roadmap , but it s to far for escrow , some other will get this idea and get it faster i think
would connect my D3s for hope and be a part of it
|
|
|
|
after running my two d3's with 400Mhz since 2 Days, im getting tousands of HW in a few hours.
i rised the voltage already to 2 but its dont getting better.
but it dont affects the hashrate or the asics, so can i keep it running or should i rise the voltage further?
try to set default voltage (13) to test then lower 2 by 2 to see ... whats your ambiant temp ? if you have less than 12~15 hw / hour it s ok |
|
|
|
Can anyone tell me if after having used the Blissz firmware, is it still possible to replace the defective board by sending it to the bitmain?
It's that with some faulty ones, but I used his firmware. how could they find out? tehy just get the boards with the asic's and not the control board or am i wrong? right if you send only hashboard. @festim dont mining on antpool ... darkside @mkmfins ... yep probably burn some of ... lower frequency for long life ... worst default (way) of humanity -> "Ever want more". if everyone go to 400Mhz , we all get more profit cause difficulty lowering and watts to :s but it s a dream i think And for some people asking if mods will come for L3+ or S9 , i m following this thread & dev since begining , and if i'm right : Blissz do not have those miners , so it's impossible to have some test to mod it unfortunalty for us ... i just connect one S9 it 's like ... euh ... plane reactor in my living and if some of you have break one or want to donate for the time to create mod , i 'm sure it's welcome |
|
|
|
|
we cant upload anymore cgminer release to s9 ?
|
|
|
|
|
Show Posts
