recheck again. work fine

other trouble. bad share on r9 290(x) card. kernel 2 too
Pool rejected result 0x0002013C (rejected share: invalid result)

1.6.5 dont work on mox after devfee
need to restart miner

solve trouble with variable rate rx 560 4 gb card on heavy

12 gpu rig work with 4 gb ram and 60 gb swap. rig work but with variable rate
change swap to 90 gb and rate stable high

via bios editing

this rig 18.5.1

[2018-07-21 17:59:28] GPU11:    444 H/s [T: 56c, RPM: 4980, CC: 1050 MHz, MC: 1800 MHz][BUS:8]
[2018-07-21 17:59:28] Total:    5325 H/s
[2018-07-21 17:59:32] Pool sent a new job (ID: 000000a800cec802)

-------------------------STATS-------------------------

Miner version: 1.6.4
Mining time: 0 days, 2 hours, 56 minutes, 25 seconds

Algo: normalv7

Pool: cryptonightv7.eu.nicehash.com:33363 (SSL/TLS)
Connected since: 2018-07-21 16:03:21
Pool Difficulty: 400015
Pool latency: ~104 ms
Last job received: 20 seconds ago

GPU target temperature: 60c

Accepted(Stale)/Total shares: 252(0)/252 (100.0%)
Average time to find share: 42 seconds
1 min. average speed:   5325 H/s
5 min. average speed:   5328 H/s
30 min. average speed:  5328 H/s
Max. speed:             5459 H/s

-------------------------------------------------------
[2018-07-21 18:00:03] Pool accepted result 0x00000CB7
[2018-07-21 18:00:10] Pool sent a new job (ID: 000000a800cfa25e)
[2018-07-21 18:00:34] Pool sent a new job (ID: 000000a800d00f46)
[2018-07-21 18:01:01] Pool sent a new job (ID: 000000a800d0a6ee)
[2018-07-21 18:01:03] Pool sent a new job (ID: 000000a800d0e1f6)
[2018-07-21 18:01:07] Pool sent a new job (ID: 000000a800d1d9c5)

560 card work poor. not stable rate

heavy config for 560\4g

"gpu_conf" :
[
   { "id" : 0, "intensity" : 26, "double_threads" : true, "persistent_memory" : true},
   { "id" : 1, "intensity" : 26, "double_threads" : true, "persistent_memory" : true},
   { "id" : 2, "intensity" : 26, "double_threads" : true, "persistent_memory" : true},
   { "id" : 3, "intensity" : 26, "double_threads" : true, "persistent_memory" : true},
   { "id" : 4, "intensity" : 26, "double_threads" : true, "persistent_memory" : true},
   { "id" : 5, "intensity" : 26, "double_threads" : true, "persistent_memory" : true},
   { "id" : 6, "intensity" : 26, "double_threads" : true, "persistent_memory" : true},
   { "id" : 7, "intensity" : 26, "double_threads" : true, "persistent_memory" : true},
   { "id" : 8, "intensity" : 26, "double_threads" : true, "persistent_memory" : true},
   { "id" : 9, "intensity" : 26, "double_threads" : true, "persistent_memory" : true},
   { "id" : 10, "intensity" : 26, "double_threads" : true, "persistent_memory" : true},
   { "id" : 11, "intensity" : 26, "double_threads" : true, "persistent_memory" : true},
]


v7 config for 550\2g int 26 for card with monitor

"gpu_conf" :
[
   { "id" : 0, "intensity" : 26, "double_threads" : true},
   { "id" : 1, "intensity" : 27, "double_threads" : true},
   { "id" : 2, "intensity" : 27, "double_threads" : true},
   { "id" : 3, "intensity" : 27, "double_threads" : true},
   { "id" : 4, "intensity" : 27, "double_threads" : true},
   { "id" : 5, "intensity" : 27, "double_threads" : true},
    { "id" : 6, "intensity" : 27, "double_threads" : true},
   { "id" : 7, "intensity" : 27, "double_threads" : true},
]

work but rate poor and need set lower intensity
was 5170 from 12 rx550\2gb in 1.4.3 Intensity 27
now 4870 in 1.6.2 Intensity 26

algo normalv7

have aes kernel error on rx550 card 2gb

4Gb? my card 2 gb only 30 with one treads on heavy

my 370 on heavy only 210 with 14\8\2

what trouble?

possible trouble in win1803
all 570\4 and 570\8 card work stable with max possible rate on v7 and heavy

ps 470\4 on win1803 work fine with 18.5.1 drivers

test a lot of configs

18.5.1 drivers is best. stable high rate

do you read my message?
rx470 4gb card
single treads
max Intensity 45
at Intensity 46 have error

have a litle trouble

algo heavy

cards rx470-570 4gb
double treads work fine
in config "intensity" : 29, "double_threads" : true

single treads dont work with error
Error CL_INVALID_BUFFER_SIZE when creating scratchpad buffer for DeviceID 0 (Thread 0)
in config "intensity" : 57, "double_threads" : false

if set intensity 0 setting 44 and slow rate
same rig work fine with config "intensity" : 58, "double_threads" : false
same drivers version 18.2.1 same swap size 60gb for 12 card same windows version 1709

v7 530 h\s at 1150\1450 with undervolting and pathched bios
int 30

heavy 230 h\s

driver version?
reinstall driver with cleanup

on rx 560 card generate each start

test rx560 card
1.5.4 rate high
1.5.5.1 rate low

570 8 gb too

algo heavy