Bitcoin Forum
June 09, 2024, 09:40:15 AM *
News: Latest Bitcoin Core release: 27.0 [Torrent]
 
  Home Help Search Login Register More  
  Show Posts
Pages: « 1 2 3 4 5 6 7 8 9 10 11 [12] 13 14 15 16 17 18 »
221  Bitcoin / Mining support / Re: [S9] brand new S9 not working on: December 12, 2017, 01:56:38 PM
Feel better will try later , thanks a lot my friend

edit , was good with your settings ... so much wait for see it , and damm the noise ....

i have to learn how to remove fan check to get silents ones
222  Bitcoin / Mining support / Re: [S9] brand new S9 not working on: December 12, 2017, 01:08:17 PM
Quote from: cryptotore on December 12, 2017, 12:56:42 PM
Relax bro, I'm certain you have just configured the miner wrong.

If you want to test worker settings you could try to mine for a second on my account.

Pool: stratum.kano.is:3333
Workername: torepia.test
Password: x

Keep in mind: You need to wait for about 10-20 minutes before the S9 will actually start working and show data under "Miner status" page.
Refresh the miner status page every minute until you start seeing updates in the "Miner status" page.
When you see data on the status page, and Pool = Alive, then you know it was just a miner config error, and you can configure it to mine on your own account!

The errors in the kernel log you are seeing is NORMAL! Smiley

Cheers!



Thanks for answer , will try but i let the antminer settings at 1st and wasnt working to.other antminer i have (not sha256) dont take 20min to start and this one restart fewly
Think i will had cgminer release then
223  Bitcoin / Mining support / Re: [S9] brand new S9 not working on: December 12, 2017, 11:19:50 AM
Look BMminer not starting.
Will try to upgrade s9 all from august.
Hope error from asic 7 is ok
224  Bitcoin / Mining support / [S9] brand new S9 not working on: December 12, 2017, 09:34:09 AM
Hello friends , as the luckiest guy (<-joke) i got 1 S9 today , just plug it (ever got antminers)
enjoy the noise of fans and then nothing in miner statut ...

the miner fans is go slowly like normal way , the green light is on (normal) and then fans gone crazy again , and again ....
like restart ... very unhappy, i feel sick  ...

here screens




here logs

Code:
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.14.0-xilinx-gb190cb0-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #57 SMP PREEMPT Fri Dec 9 14:49:22 CST 2016
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Xilinx Zynq
[    0.000000] cma: CMA: reserved 128 MiB at 27800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 258048
[    0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map e6fd8000
[    0.000000]   Normal zone: 1520 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 194560 pages, LIFO batch:31
[    0.000000]   HighMem zone: 496 pages used for memmap
[    0.000000]   HighMem zone: 63488 pages, LIFO batch:15
[    0.000000] PERCPU: Embedded 8 pages/cpu @e6fc0000 s9088 r8192 d15488 u32768
[    0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 256528
[    0.000000] Kernel command line: noinitrd mem=1008M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 884148K/1032192K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 148044K reserved, 253952K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc06d1374   (6949 kB)
[    0.000000]       .init : 0xc06d2000 - 0xc0705380   ( 205 kB)
[    0.000000]       .data : 0xc0706000 - 0xc074cf78   ( 284 kB)
[    0.000000]        .bss : 0xc074cf84 - 0xc078d9fc   ( 259 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] ps7-slcr mapped to f0004000
[    0.000000] zynq_clock_init: clkc starts at f0004100
[    0.000000] Zynq clock init
[    0.000015] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[    0.000307] ps7-ttc #0 at f0006000, irq=43
[    0.000614] Console: colour dummy device 80x30
[    0.000651] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[    0.040207] pid_max: default: 32768 minimum: 301
[    0.040429] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.040449] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.042600] CPU: Testing write buffer coherency: ok
[    0.042946] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.043004] Setting up static identity map for 0x4c4af8 - 0x4c4b50
[    0.043224] L310 cache controller enabled
[    0.043244] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[    0.121038] CPU1: Booted secondary processor
[    0.210228] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.210360] Brought up 2 CPUs
[    0.210379] SMP: Total of 2 processors activated.
[    0.210387] CPU: All CPU(s) started in SVC mode.
[    0.211038] devtmpfs: initialized
[    0.213451] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.214648] regulator-dummy: no parameters
[    0.222339] NET: Registered protocol family 16
[    0.224635] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.226903] cpuidle: using governor ladder
[    0.226917] cpuidle: using governor menu
[    0.234302] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[    0.235811] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.235825] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.235939] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xf0080000
[    0.257348] bio: create slab <bio-0> at 0
[    0.258739] vgaarb: loaded
[    0.259470] SCSI subsystem initialized
[    0.260463] usbcore: registered new interface driver usbfs
[    0.260641] usbcore: registered new interface driver hub
[    0.260863] usbcore: registered new device driver usb
[    0.262143] media: Linux media interface: v0.10
[    0.262303] Linux video capture interface: v2.00
[    0.262542] pps_core: LinuxPPS API ver. 1 registered
[    0.262554] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.262684] PTP clock support registered
[    0.263033] EDAC MC: Ver: 3.0.0
[    0.264066] Advanced Linux Sound Architecture Driver Initialized.
[    0.266450] DMA-API: preallocated 4096 debug entries
[    0.266464] DMA-API: debugging enabled by kernel config
[    0.266546] Switched to clocksource arm_global_timer
[    0.286840] NET: Registered protocol family 2
[    0.287495] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.287593] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.287752] TCP: Hash tables configured (established 8192 bind 8192)
[    0.287816] TCP: reno registered
[    0.287833] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.287884] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.288147] NET: Registered protocol family 1
[    0.288498] RPC: Registered named UNIX socket transport module.
[    0.288509] RPC: Registered udp transport module.
[    0.288518] RPC: Registered tcp transport module.
[    0.288526] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.288539] PCI: CLS 0 bytes, default 64
[    0.288980] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[    0.290997] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.292374] bounce pool size: 64 pages
[    0.293272] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    0.293473] msgmni has been set to 1486
[    0.294250] io scheduler noop registered
[    0.294263] io scheduler deadline registered
[    0.294304] io scheduler cfq registered (default)
[    0.303961] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[    0.303981] dma-pl330 f8003000.ps7-dma: 	DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[    0.426297] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[    0.999084] console [ttyPS0] enabled
[    1.003359] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to f0068000
[    1.010986] [drm] Initialized drm 1.1.0 20060810
[    1.028142] brd: module loaded
[    1.037521] loop: module loaded
[    1.047183] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.052934] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    1.060986] libphy: XEMACPS mii bus: probed
[    1.065356] ------------- phy_id = 0x3625e62
[    1.070141] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[    1.078774] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.085382] ehci-pci: EHCI PCI platform driver
[    1.092610] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[    1.099462] usbcore: registered new interface driver usb-storage
[    1.106311] mousedev: PS/2 mouse device common for all mice
[    1.112465] i2c /dev entries driver
[    1.119399] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[    1.124882] cpufreq_cpu0: failed to get cpu0 regulator: -19
[    1.130798] Xilinx Zynq CpuIdle Driver started
[    1.135644] sdhci: Secure Digital Host Controller Interface driver
[    1.141788] sdhci: Copyright(c) Pierre Ossman
[    1.146079] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.152950] mmc0: no vqmmc regulator found
[    1.156994] mmc0: no vmmc regulator found
[    1.196567] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[    1.205264] usbcore: registered new interface driver usbhid
[    1.210773] usbhid: USB HID core driver
[    1.215476] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[    1.221770] nand: Micron MT29F2G08ABAEAWP
[    1.225738] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[    1.231689] Bad block table found at page 131008, version 0x01
[    1.237915] Bad block table found at page 130944, version 0x01
[    1.243969] 3 ofpart partitions found on MTD device pl353-nand
[    1.249754] Creating 3 MTD partitions on "pl353-nand":
[    1.254851] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[    1.262904] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[    1.270213] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[    1.279148] TCP: cubic registered
[    1.282385] NET: Registered protocol family 17
[    1.287110] Registering SWP/SWPB emulation handler
[    1.293043] regulator-dummy: disabling
[    1.297377] UBI: attaching mtd1 to ubi0
[    1.825360] UBI: scanning is finished
[    1.837009] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[    1.844067] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    1.850853] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    1.857539] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[    1.864377] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[    1.870387] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[    1.877498] UBI: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 916511165
[    1.886425] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[    1.895656] UBI: background thread "ubi_bgt0d" started, PID 1080
[    1.895661] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.899636] ALSA device list:
[    1.899639]   No soundcards found.
[    1.915995] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082
[    1.945052] UBIFS: recovery needed
[    2.031626] UBIFS: recovery completed
[    2.035298] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[    2.041253] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    2.050353] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[    2.060241] UBIFS: reserved for root: 0 bytes (0 KiB)
[    2.065271] UBIFS: media format: w4/r0 (latest is w4/r0), UUID BBDF9B01-1A34-456B-9FBF-33B446951E64, small LPT model
[    2.076803] VFS: Mounted root (ubifs filesystem) on device 0:11.
[    2.083759] devtmpfs: mounted
[    2.086891] Freeing unused kernel memory: 204K (c06d2000 - c0705000)
[    2.923749] random: dd urandom read with 0 bits of entropy available
[    3.316590] 
[    3.316590] bcm54xx_config_init
[    3.926591] 
[    3.926591] bcm54xx_config_init
[    7.927420] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[    7.933513] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[   24.296079] In axi fpga driver!
[   24.299181] request_mem_region OK!
[   24.302540] AXI fpga dev virtual address is 0xf01fe000
[   24.307679] *base_vir_addr = 0x8c510
[   24.322742] In fpga mem driver!
[   24.325945] request_mem_region OK!
[   24.329567] fpga mem virtual address is 0xf3000000
[   25.136582] 
[   25.136582] bcm54xx_config_init
[   25.766570] 
[   25.766570] bcm54xx_config_init
[   29.767426] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[   29.773446] xemacps e000b000.ps7-ethernet: link up (100/FULL)
This is XILINX board. Totalram:       1039794176
Detect 1GB control board of XILINX
DETECT HW version=0008c510
miner ID : 807cf58162bb885c
Miner Type = S9
AsicType = 1387
real AsicNum = 63
use critical mode to search freq...
get PLUG ON=0x000000e0
Find hashboard on Chain[5]
Find hashboard on Chain[6]
Find hashboard on Chain[7]
set_reset_allhashboard = 0x0000ffff
Check chain[5] PIC fw version=0x03
Check chain[6] PIC fw version=0x03
Check chain[7] PIC fw version=0x03
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[5] has freq in PIC and will jump over...
Chain[5] has core num in PIC
Chain[5] ASIC[44] has core num=1
Chain[5] ASIC[50] has core num=3
Chain[5] ASIC[62] has core num=3
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[6] has freq in PIC and will jump over...
Chain[6] has core num in PIC
Chain[6] ASIC[46] has core num=15
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[7] has freq in PIC and will jump over...
Chain[7] has core num in PIC
Check chain[7] PIC fw version=0x03
get PIC voltage=125 on chain[5], value=870
get PIC voltage=91 on chain[6], value=890
get PIC voltage=91 on chain[7], value=890
set_reset_allhashboard = 0x00000000
chain[5] temp offset record: 62,0,0,0,0,0,35,28
chain[5] temp chip I2C addr=0x98
chain[5] has no middle temp, use special fix mode.
chain[6] temp offset record: 62,0,0,0,0,0,35,28
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
chain[7] temp offset record: 62,0,0,0,0,0,35,28
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
CRC error counter=0
set command mode to VIL

--- check asic number
set_baud=0
The min freq=700
set real timeout 52, need sleep=379392
After TEST CRC error counter=0
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
search freq for 1 times, completed chain = 3, total chain num = 3 
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
restart Miner chance num=2
waiting for receive_func to exit!
waiting for pic heart to exit!
bmminer not found= 1383 root       0:00 grep bmminer

bmminer not found, restart bmminer ...
bmminer not found= 2039 root       0:00 grep bmminer

bmminer not found, restart bmminer ...
This is user mode for mining
Detect 1GB control board of XILINX
Miner Type = S9
Miner compile time: Fri Jul 21 05:15:25 EDT 2017 type: Antminer S9set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
miner ID : 807cf58162bb885c
set_reset_allhashboard = 0x0000ffff
Checking fans!get fan[2] speed=6120
get fan[2] speed=6120
get fan[2] speed=6120
get fan[2] speed=6120
get fan[2] speed=6120
get fan[2] speed=6120
get fan[5] speed=6120
get fan[2] speed=6120
get fan[5] speed=6120
get fan[2] speed=6120
get fan[5] speed=6120
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: use lower voltage on searching freq!
Chain[J6] has backup chain_voltage=870
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: use lower voltage on searching freq!
Chain[J7] has backup chain_voltage=890
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: use lower voltage on searching freq!
Chain[J8] has backup chain_voltage=890
Check chain[7] PIC fw version=0x03
Chain[J6] orignal chain_voltage_pic=125 value=870
Chain[J7] orignal chain_voltage_pic=91 value=890
Chain[J8] orignal chain_voltage_pic=91 value=890
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
Chain[J6] has 63 asic
Chain[J7] has 63 asic
Chain[J8] has 63 asic
Chain[J6] has core num in PIC
Chain[J6] ASIC[44] has core num=1
Chain[J6] ASIC[50] has core num=3
Chain[J6] ASIC[62] has core num=3
Chain[J7] has core num in PIC
Chain[J7] ASIC[46] has core num=15
Chain[J8] has core num in PIC
miner total rate=13869GH/s fixed rate=13500GH/s
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=662
Asic[ 0]:662 
Asic[ 1]:662 Asic[ 2]:662 Asic[ 3]:662 Asic[ 4]:662 Asic[ 5]:662 Asic[ 6]:662 Asic[ 7]:662 Asic[ 8]:662 
Asic[ 9]:662 Asic[10]:662 Asic[11]:662 Asic[12]:662 Asic[13]:662 Asic[14]:662 Asic[15]:662 Asic[16]:662 
Asic[17]:662 Asic[18]:662 Asic[19]:662 Asic[20]:662 Asic[21]:662 Asic[22]:662 Asic[23]:662 Asic[24]:662 
Asic[25]:662 Asic[26]:662 Asic[27]:662 Asic[28]:662 Asic[29]:662 Asic[30]:662 Asic[31]:662 Asic[32]:662 
Asic[33]:662 Asic[34]:662 Asic[35]:662 Asic[36]:662 Asic[37]:662 Asic[38]:662 Asic[39]:662 Asic[40]:662 
Asic[41]:662 Asic[42]:662 Asic[43]:662 Asic[44]:662 Asic[45]:662 Asic[46]:662 Asic[47]:662 Asic[48]:662 
Asic[49]:662 Asic[50]:662 Asic[51]:662 Asic[52]:662 Asic[53]:662 Asic[54]:662 Asic[55]:662 Asic[56]:662 
Asic[57]:662 Asic[58]:662 Asic[59]:662 Asic[60]:662 Asic[61]:662 Asic[62]:662 
Chain:5 max freq=662
Chain:5 min freq=662

read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=643
Asic[ 0]:643 
Asic[ 1]:643 Asic[ 2]:643 Asic[ 3]:643 Asic[ 4]:643 Asic[ 5]:643 Asic[ 6]:643 Asic[ 7]:643 Asic[ 8]:643 
Asic[ 9]:643 Asic[10]:643 Asic[11]:643 Asic[12]:643 Asic[13]:643 Asic[14]:643 Asic[15]:643 Asic[16]:643 
Asic[17]:643 Asic[18]:643 Asic[19]:643 Asic[20]:643 Asic[21]:643 Asic[22]:643 Asic[23]:643 Asic[24]:643 
Asic[25]:643 Asic[26]:643 Asic[27]:643 Asic[28]:643 Asic[29]:643 Asic[30]:643 Asic[31]:643 Asic[32]:643 
Asic[33]:643 Asic[34]:643 Asic[35]:643 Asic[36]:643 Asic[37]:643 Asic[38]:643 Asic[39]:643 Asic[40]:643 
Asic[41]:643 Asic[42]:643 Asic[43]:643 Asic[44]:643 Asic[45]:643 Asic[46]:643 Asic[47]:643 Asic[48]:643 
Asic[49]:643 Asic[50]:643 Asic[51]:643 Asic[52]:643 Asic[53]:643 Asic[54]:643 Asic[55]:643 Asic[56]:643 
Asic[57]:643 Asic[58]:643 Asic[59]:643 Asic[60]:643 Asic[61]:643 Asic[62]:643 
Chain:6 max freq=643
Chain:6 min freq=643

read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=0
Chain:7 base freq=637
Asic[ 0]:637 
Asic[ 1]:637 Asic[ 2]:637 Asic[ 3]:637 Asic[ 4]:637 Asic[ 5]:637 Asic[ 6]:637 Asic[ 7]:637 Asic[ 8]:637 
Asic[ 9]:637 Asic[10]:637 Asic[11]:637 Asic[12]:637 Asic[13]:637 Asic[14]:637 Asic[15]:637 Asic[16]:637 
Asic[17]:637 Asic[18]:637 Asic[19]:637 Asic[20]:637 Asic[21]:637 Asic[22]:637 Asic[23]:637 Asic[24]:637 
Asic[25]:637 Asic[26]:637 Asic[27]:637 Asic[28]:637 Asic[29]:637 Asic[30]:637 Asic[31]:637 Asic[32]:637 
Asic[33]:637 Asic[34]:637 Asic[35]:637 Asic[36]:637 Asic[37]:637 Asic[38]:637 Asic[39]:637 Asic[40]:637 
Asic[41]:637 Asic[42]:637 Asic[43]:637 Asic[44]:637 Asic[45]:637 Asic[46]:637 Asic[47]:637 Asic[48]:637 
Asic[49]:637 Asic[50]:637 Asic[51]:637 Asic[52]:637 Asic[53]:637 Asic[54]:637 Asic[55]:637 Asic[56]:637 
Asic[57]:637 Asic[58]:637 Asic[59]:637 Asic[60]:637 Asic[61]:637 Asic[62]:637 
Chain:7 max freq=637
Chain:7 min freq=637


Miner fix freq ...
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=662
Asic[ 0]:643 
Asic[ 1]:643 Asic[ 2]:643 Asic[ 3]:643 Asic[ 4]:643 Asic[ 5]:643 Asic[ 6]:643 Asic[ 7]:643 Asic[ 8]:643 
Asic[ 9]:643 Asic[10]:643 Asic[11]:643 Asic[12]:643 Asic[13]:643 Asic[14]:643 Asic[15]:650 Asic[16]:650 
Asic[17]:650 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650 Asic[24]:650 
Asic[25]:650 Asic[26]:650 Asic[27]:650 Asic[28]:650 Asic[29]:650 Asic[30]:650 Asic[31]:650 Asic[32]:650 
Asic[33]:650 Asic[34]:650 Asic[35]:650 Asic[36]:650 Asic[37]:650 Asic[38]:650 Asic[39]:650 Asic[40]:650 
Asic[41]:650 Asic[42]:650 Asic[43]:650 Asic[44]:650 Asic[45]:650 Asic[46]:650 Asic[47]:650 Asic[48]:650 
Asic[49]:650 Asic[50]:650 Asic[51]:650 Asic[52]:650 Asic[53]:650 Asic[54]:650 Asic[55]:650 Asic[56]:650 
Asic[57]:650 Asic[58]:650 Asic[59]:650 Asic[60]:650 Asic[61]:650 Asic[62]:650 
Chain:5 max freq=650
Chain:5 min freq=643

read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=643
Asic[ 0]:643 
Asic[ 1]:643 Asic[ 2]:643 Asic[ 3]:643 Asic[ 4]:643 Asic[ 5]:643 Asic[ 6]:643 Asic[ 7]:643 Asic[ 8]:643 
Asic[ 9]:643 Asic[10]:643 Asic[11]:643 Asic[12]:643 Asic[13]:643 Asic[14]:643 Asic[15]:643 Asic[16]:643 
Asic[17]:643 Asic[18]:643 Asic[19]:643 Asic[20]:643 Asic[21]:643 Asic[22]:643 Asic[23]:643 Asic[24]:643 
Asic[25]:643 Asic[26]:643 Asic[27]:643 Asic[28]:643 Asic[29]:643 Asic[30]:643 Asic[31]:643 Asic[32]:643 
Asic[33]:643 Asic[34]:643 Asic[35]:643 Asic[36]:643 Asic[37]:643 Asic[38]:643 Asic[39]:643 Asic[40]:643 
Asic[41]:643 Asic[42]:643 Asic[43]:643 Asic[44]:643 Asic[45]:643 Detect a bad chip=46 on chain[6], fixed to 400M
Asic[46]:643 Asic[47]:643 Asic[48]:643 
Asic[49]:643 Asic[50]:643 Asic[51]:643 Asic[52]:643 Asic[53]:643 Asic[54]:643 Asic[55]:643 Asic[56]:643 
Asic[57]:643 Asic[58]:643 Asic[59]:643 Asic[60]:643 Asic[61]:643 Asic[62]:643 
Chain:6 max freq=643
Chain:6 min freq=643

read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=0
Chain:7 base freq=637
Asic[ 0]:637 
Asic[ 1]:637 Asic[ 2]:637 Asic[ 3]:637 Asic[ 4]:637 Asic[ 5]:637 Asic[ 6]:637 Asic[ 7]:637 Asic[ 8]:637 
Asic[ 9]:637 Asic[10]:637 Asic[11]:637 Asic[12]:637 Asic[13]:637 Asic[14]:637 Asic[15]:637 Asic[16]:637 
Asic[17]:637 Asic[18]:637 Asic[19]:637 Asic[20]:637 Asic[21]:637 Asic[22]:637 Asic[23]:637 Asic[24]:637 
Asic[25]:637 Asic[26]:637 Asic[27]:637 Asic[28]:637 Asic[29]:637 Asic[30]:637 Asic[31]:637 Asic[32]:637 
Asic[33]:637 Asic[34]:637 Asic[35]:637 Asic[36]:637 Asic[37]:637 Asic[38]:637 Asic[39]:637 Asic[40]:637 
Asic[41]:637 Asic[42]:637 Asic[43]:637 Asic[44]:637 Asic[45]:637 Asic[46]:637 Asic[47]:637 Asic[48]:637 
Asic[49]:637 Asic[50]:637 Asic[51]:637 Asic[52]:637 Asic[53]:637 Asic[54]:637 Asic[55]:637 Asic[56]:637 
Asic[57]:637 Asic[58]:637 Asic[59]:637 Asic[60]:637 Asic[61]:637 Asic[62]:637 
Chain:7 max freq=637
Chain:7 min freq=637

max freq = 650
set baud=1
Chain[J6] PIC temp offset=62,0,0,0,0,0,35,28
chain[5] temp chip I2C addr=0x98
chain[5] has no middle temp, use special fix mode.
Chain[J6] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[5] chip[244] local:25 remote:28 offset:27 
Chain[J6] chip[244] get middle temp offset=27 typeID=55
Chain[J7] PIC temp offset=62,0,0,0,0,0,35,28
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
Chain[J7] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[6] chip[244] local:17 remote:19 offset:27 
Chain[J7] chip[244] get middle temp offset=27 typeID=55
Chain[J8] PIC temp offset=62,0,0,0,0,0,35,28
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
Chain[J8] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[7] chip[244] local:17 remote:22 offset:24 
Chain[J8] chip[244] get middle temp offset=24 typeID=55
single board rate=4651 voltage limit=890 on chain[5]
last_testpatten_highest_pcb_temp=52 too low, fix voltage=900 on chain[5]
get PIC voltage=870 on chain[5], check: must be < 900
retryFlag=1 will set the voltage limited on chain[5], change voltage=900
now set pic voltage=74 on chain[5]
single board rate=4544 voltage limit=890 on chain[6]
last_testpatten_highest_pcb_temp=52 too low, fix voltage=900 on chain[6]
get PIC voltage=890 on chain[6], check: must be < 900
retryFlag=1 will set the voltage limited on chain[6], change voltage=900
now set pic voltage=74 on chain[6]
single board rate=4574 voltage limit=890 on chain[7]
last_testpatten_highest_pcb_temp=52 too low, fix voltage=900 on chain[7]
get PIC voltage=890 on chain[7], check: must be < 900
retryFlag=1 will set the voltage limited on chain[7], change voltage=900
now set pic voltage=74 on chain[7]
Chain[J6] set working voltage=900 [74]
Chain[J7] set working voltage=900 [74]
Chain[J8] set working voltage=900 [74]
do heat board 8xPatten for 1 times
start send works on chain[5]
start send works on chain[6]
start send works on chain[7]
get send work num :57456 on Chain[5]
get send work num :57456 on Chain[6]
get send work num :57456 on Chain[7]
wait recv nonce on chain[5]
wait recv nonce on chain[6]
wait recv nonce on chain[7]
get nonces on chain[5]
require nonce number:912
require validnonce number:57456
asic[00]=912	asic[01]=912	asic[02]=912	asic[03]=912	asic[04]=912	asic[05]=912	asic[06]=912	asic[07]=912	
asic[08]=912	asic[09]=912	asic[10]=912	asic[11]=912	asic[12]=912	asic[13]=912	asic[14]=912	asic[15]=912	
asic[16]=912	asic[17]=912	asic[18]=912	asic[19]=912	asic[20]=912	asic[21]=912	asic[22]=912	asic[23]=912	
asic[24]=912	asic[25]=912	asic[26]=912	asic[27]=912	asic[28]=912	asic[29]=912	asic[30]=912	asic[31]=912	
asic[32]=912	asic[33]=912	asic[34]=912	asic[35]=912	asic[36]=912	asic[37]=912	asic[38]=912	asic[39]=912	
asic[40]=912	asic[41]=912	asic[42]=912	asic[43]=912	asic[44]=912	asic[45]=912	asic[46]=912	asic[47]=912	
asic[48]=912	asic[49]=912	asic[50]=911	asic[51]=912	asic[52]=912	asic[53]=912	asic[54]=912	asic[55]=912	
asic[56]=912	asic[57]=912	asic[58]=912	asic[59]=912	asic[60]=912	asic[61]=912	asic[62]=912	


Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!

asic[50]=911
core[060]=7	



freq[00]=643	freq[01]=643	freq[02]=643	freq[03]=643	freq[04]=643	freq[05]=643	freq[06]=643	freq[07]=643	
freq[08]=643	freq[09]=643	freq[10]=643	freq[11]=643	freq[12]=643	freq[13]=643	freq[14]=643	freq[15]=650	
freq[16]=650	freq[17]=650	freq[18]=650	freq[19]=650	freq[20]=650	freq[21]=650	freq[22]=650	freq[23]=650	
freq[24]=650	freq[25]=650	freq[26]=650	freq[27]=650	freq[28]=650	freq[29]=650	freq[30]=650	freq[31]=650	
freq[32]=650	freq[33]=650	freq[34]=650	freq[35]=650	freq[36]=650	freq[37]=650	freq[38]=650	freq[39]=650	
freq[40]=650	freq[41]=650	freq[42]=650	freq[43]=650	freq[44]=650	freq[45]=650	freq[46]=650	freq[47]=650	
freq[48]=650	freq[49]=650	freq[50]=650	freq[51]=650	freq[52]=650	freq[53]=650	freq[54]=650	freq[55]=650	
freq[56]=650	freq[57]=650	freq[58]=650	freq[59]=650	freq[60]=650	freq[61]=650	freq[62]=650	

total valid nonce number:57455
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:26552
last_nonce_num:28636
get nonces on chain[6]
require nonce number:912
require validnonce number:57456
asic[00]=912	asic[01]=912	asic[02]=912	asic[03]=912	asic[04]=912	asic[05]=912	asic[06]=912	asic[07]=912	
asic[08]=912	asic[09]=912	asic[10]=912	asic[11]=912	asic[12]=903	asic[13]=912	asic[14]=912	asic[15]=912	
asic[16]=912	asic[17]=912	asic[18]=912	asic[19]=912	asic[20]=912	asic[21]=912	asic[22]=912	asic[23]=912	
asic[24]=912	asic[25]=912	asic[26]=912	asic[27]=912	asic[28]=912	asic[29]=912	asic[30]=912	asic[31]=912	
asic[32]=912	asic[33]=912	asic[34]=912	asic[35]=912	asic[36]=912	asic[37]=912	asic[38]=912	asic[39]=912	
asic[40]=912	asic[41]=912	asic[42]=912	asic[43]=912	asic[44]=912	asic[45]=912	asic[46]=912	asic[47]=912	
asic[48]=912	asic[49]=912	asic[50]=912	asic[51]=912	asic[52]=912	asic[53]=912	asic[54]=912	asic[55]=912	
asic[56]=912	asic[57]=912	asic[58]=911	asic[59]=912	asic[60]=912	asic[61]=912	asic[62]=912	


Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!

asic[12]=903
core[060]=6	core[082]=7	core[101]=5	core[104]=5	

asic[58]=911
core[058]=7	



freq[00]=643	freq[01]=643	freq[02]=643	freq[03]=643	freq[04]=643	freq[05]=643	freq[06]=643	freq[07]=643	
freq[08]=643	freq[09]=643	freq[10]=643	freq[11]=643	freq[12]=643	freq[13]=643	freq[14]=643	freq[15]=643	
freq[16]=643	freq[17]=643	freq[18]=643	freq[19]=643	freq[20]=643	freq[21]=643	freq[22]=643	freq[23]=643	
freq[24]=643	freq[25]=643	freq[26]=643	freq[27]=643	freq[28]=643	freq[29]=643	freq[30]=643	freq[31]=643	
freq[32]=643	freq[33]=643	freq[34]=643	freq[35]=643	freq[36]=643	freq[37]=643	freq[38]=643	freq[39]=643	
freq[40]=643	freq[41]=643	freq[42]=643	freq[43]=643	freq[44]=643	freq[45]=643	freq[46]=643	freq[47]=643	
freq[48]=643	freq[49]=643	freq[50]=643	freq[51]=643	freq[52]=643	freq[53]=643	freq[54]=643	freq[55]=643	
freq[56]=643	freq[57]=643	freq[58]=643	freq[59]=643	freq[60]=643	freq[61]=643	freq[62]=643	

total valid nonce number:57446
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:26193
last_nonce_num:28617
get nonces on chain[7]
require nonce number:912
require validnonce number:57456
asic[00]=911	asic[01]=912	asic[02]=912	asic[03]=912	asic[04]=912	asic[05]=912	asic[06]=912	asic[07]=912	
asic[08]=912	asic[09]=912	asic[10]=912	asic[11]=912	asic[12]=912	asic[13]=912	asic[14]=908	asic[15]=912	
asic[16]=912	asic[17]=912	asic[18]=912	asic[19]=912	asic[20]=912	asic[21]=912	asic[22]=876	asic[23]=912	
asic[24]=912	asic[25]=912	asic[26]=912	asic[27]=912	asic[28]=912	asic[29]=904	asic[30]=912	asic[31]=912	
asic[32]=912	asic[33]=912	asic[34]=912	asic[35]=912	asic[36]=912	asic[37]=912	asic[38]=912	asic[39]=912	
asic[40]=912	asic[41]=912	asic[42]=912	asic[43]=912	asic[44]=912	asic[45]=912	asic[46]=912	asic[47]=912	
asic[48]=912	asic[49]=912	asic[50]=912	asic[51]=910	asic[52]=912	asic[53]=912	asic[54]=912	asic[55]=905	
asic[56]=912	asic[57]=912	asic[58]=912	asic[59]=912	asic[60]=912	asic[61]=912	asic[62]=912	


Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!

asic[00]=911
core[043]=7	

asic[14]=908
core[001]=6	core[060]=7	core[063]=7	

asic[22]=876
core[003]=7	core[029]=5	core[059]=7	core[060]=5	core[070]=6	core[082]=6	core[095]=4	core[096]=3	core[097]=6	core[100]=4	core[102]=4	core[103]=7	core[113]=4	

asic[29]=904
core[060]=4	core[062]=5	core[088]=7	

asic[51]=910
core[058]=6	

asic[55]=905
core[058]=7	core[060]=4	core[062]=7	core[088]=7	



freq[00]=637	freq[01]=637	freq[02]=637	freq[03]=637	freq[04]=637	freq[05]=637	freq[06]=637	freq[07]=637	
freq[08]=637	freq[09]=637	freq[10]=637	freq[11]=637	freq[12]=637	freq[13]=637	freq[14]=637	freq[15]=637	
freq[16]=637	freq[17]=637	freq[18]=637	freq[19]=637	freq[20]=637	freq[21]=637	freq[22]=637	freq[23]=637	
freq[24]=637	freq[25]=637	freq[26]=637	freq[27]=637	freq[28]=637	freq[29]=637	freq[30]=637	freq[31]=637	
freq[32]=637	freq[33]=637	freq[34]=637	freq[35]=637	freq[36]=637	freq[37]=637	freq[38]=637	freq[39]=637	
freq[40]=637	freq[41]=637	freq[42]=637	freq[43]=637	freq[44]=637	freq[45]=637	freq[46]=637	freq[47]=637	
freq[48]=637	freq[49]=637	freq[50]=637	freq[51]=637	freq[52]=637	freq[53]=637	freq[54]=637	freq[55]=637	
freq[56]=637	freq[57]=637	freq[58]=637	freq[59]=637	freq[60]=637	freq[61]=637	freq[62]=637	

total valid nonce number:57398
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:26094
last_nonce_num:28644
chain[5]: All chip cores are opened OK!
Test Patten on chain[5]: OK!
chain[6]: All chip cores are opened OK!
Test Patten on chain[6]: FAILED!
chain[7]: All chip cores are opened OK!
Test Patten on chain[7]: FAILED!
do heat board 8xPatten for 2 times
start send works on chain[5]
start send works on chain[6]
start send works on chain[7]
do read_temp_func once...
do check_asic_reg 0x08
Done check_asic_reg
do read temp on Chain[5]
Chain[5] Chip[62] TempTypeID=55 middle offset=27
Chain[5] Chip[62] local Temp=50
Chain[5] Chip[62] middle Temp=62
Special fix Chain[5] Chip[62] middle Temp = 65
Done read temp on Chain[5]
do read temp on Chain[6]
Chain[6] Chip[62] TempTypeID=55 middle offset=27
Chain[6] Chip[62] local Temp=45
Chain[6] Chip[62] middle Temp=56
Special fix Chain[6] Chip[62] middle Temp = 60
Done read temp on Chain[6]
do read temp on Chain[7]
Chain[7] Chip[62] TempTypeID=55 middle offset=24
Chain[7] Chip[62] local Temp=47
Chain[7] Chip[62] middle Temp=57
Special fix Chain[7] Chip[62] middle Temp = 62
Done read temp on Chain[7]
set FAN speed according to: temp_highest=50 temp_top1[PWM_T]=50 temp_top1[TEMP_POS_LOCAL]=50 temp_change=2 fix_fan_steps=0
set normal FAN speed...
FAN PWM: 50
read_temp_func Done!
CRC error counter=0

did someone now what happen ?
225  Local / Annonces / Re: [ANN][ICO] ⚡ Electroneum - Minage sur Smartphone ⚡ 100% ($40M) déjà collectés !! on: December 11, 2017, 12:22:36 PM
since 2 days electroneumd.exe , is crashing at start , what happen ? am i alone with this issue , i sync my offline wallet with it
depuis 2 jours impossible de lancer electroneumd.exe , crash au lancement , quelqu'un d'autre a cela ?
226  Alternate cryptocurrencies / Announcements (Altcoins) / Re: [ANN] Ellaism: Ethereum network with no premine and no contentious hard forks on: December 10, 2017, 10:53:35 AM
280 Million was created not 2,7 -_-

Quote from: CryptoPravda on December 10, 2017, 10:44:04 AM
We must all unite and promote this coin.
Twitter
Youtube
Bitcointalk
News sites

Help me create an advertising text for this coin.
I believe that this coin can easily cost $ 1000

like it to but your are dreaming man wake up
227  Alternate cryptocurrencies / Mining (Altcoins) / Re: Antminer D3 Blissz firmware (08/12 v1.11 update) on: December 10, 2017, 10:45:23 AM
Quote from: may142012 on December 09, 2017, 11:49:13 PM
Quote from: HavenZone on December 09, 2017, 11:43:10 PM
Quote from: samshanna on December 09, 2017, 09:01:59 PM
Guys.  I'm setup with zpool with 6 D3's.   Running around 17/GH each.   What diff should i be running?   Im showing roughly 20/GH total on Zpools dashboard.  I'm totally lost.  Thanks for the help.  

zPool shows the exact setup for a D3 on their home page with the dif of 92

"Bitmain D3 Settings:
URL: x11.mine.zpool.ca:3533#xnsub
Worker: <WALLET_ADDRESS>
Password: c=<SYMBOL>,d=92"

I have always used them as my backup to nicehash and since the hack they have been having issues with the pool since there are so many new users. I get a pretty close match on the hash reported.

How much do you make with zpool in 24h? Zpool had a history of taking 20% hidden fees before, so i am afraid of using that pool, i have prohashing as my backup pool.
dont worry it s only 15% hidden now ...

---->[]  Grin

forget other algo like timetravel10 , be logic men ... instead if you want burn your miner , you wont have profit
228  Alternate cryptocurrencies / Mining (Altcoins) / Re: Issue new antminer l3+ on: December 09, 2017, 10:48:58 AM
/notlucky

Code:
Dec  9 11:01:28 (none) local0.err cgminer: Miner compile time: Fri Aug 25 17:28:57 CST 2017 type: Antminer L3+
Dec  9 11:01:28 (none) local0.warn cgminer: Started cgminer 4.9.0
Dec  9 11:01:28 (none) local0.notice cgminer[374]:  detected at /sys/class/gpio/gpio51/value  chain 0
Dec  9 11:01:28 (none) local0.notice cgminer[374]: detect total chain num 1
Dec  9 11:01:28 (none) local0.notice cgminer[374]: i2c init ok
Dec  9 11:01:30 (none) local0.notice cgminer[374]: Chain 0 PIC Version 0x0

here the one i can flash , other no way



here the result with one fixed board and one more connected

Code:
Dec  9 10:45:39 (none) local0.err cgminer: Miner compile time: Fri Aug 25 17:28:57 CST 2017 type: Antminer L3+
Dec  9 10:45:39 (none) local0.warn cgminer: Started cgminer 4.9.0
Dec  9 10:45:39 (none) local0.notice cgminer[374]:  detected at /sys/class/gpio/gpio51/value  chain 0
Dec  9 10:45:39 (none) local0.notice cgminer[374]:  detected at /sys/class/gpio/gpio48/value  chain 1
Dec  9 10:45:39 (none) local0.notice cgminer[374]: detect total chain num 2
Dec  9 10:45:39 (none) local0.notice cgminer[374]: i2c init ok
Dec  9 10:45:42 (none) local0.notice cgminer[374]: Chain 0 PIC Version 0x3
Dec  9 10:45:42 (none) local0.notice cgminer[374]: Chain 1 PIC Version 0xcc

edit : after reflash with one board seem to be not flashed , not succes for me even with fix2
kernel was done and it was mining at 30mhs (100mhz) like playboy333 but now board not recognize . a now stick to
Code:
Dec  9 12:05:25 (none) local0.notice cgminer[374]: i2c init ok
Dec  9 12:05:28 (none) local0.notice cgminer[374]: Chain 0 PIC Version 0xcc

re edit : after again and again , this time i got the 1 st board at up good ... but no way for toher , this make no sense.

think i will use pickit at worst , will wait for next fix3 to try
seem software version is not recognize everytime
229  Alternate cryptocurrencies / Mining (Altcoins) / Re: Issue new antminer l3+ on: December 09, 2017, 10:33:40 AM
Quote from: martin_fryc on December 07, 2017, 07:18:31 PM
Quote from: Egorrichminer on November 26, 2017, 10:45:14 PM
Hi Folks!

Absolutely the same stuff I'm having now with my L3+ too.

I had a well working L3+, then by mistake flashed it with D3 firmware (instead of different ASIC device... to fix the "x" issue solved in the 20th of November 2017 formware for D3). After that I immediately re-flashed back to the L3+ firmware but got what i got, Zero chips on each of the four hash-blades...

I tried all the stuff including Micri SD image as did here and the same it didn't help.

I also need this suggestion on which hex file to take and from where (the path) on the correctly working hash blade from another L3+. So I "ssh" the L3+ and should "scp" the file ?? to the same location on the malfunctioning L3+ (do that for all 4 blades) and then reboot. Cirrect? Which path to the file then guys?

Please help.

Thanks,
Egor

I had the same issue with my L3+. Mistakenly updated with D3 firmware. I was able to bring it back to life with PICkit 3 and hex file from another L3+. Many thanks guys!!!

Happy to help man , please share the file to flash , i will edit 1st post with different solution later Smiley
230  Alternate cryptocurrencies / Mining (Altcoins) / Re: Issue new antminer l3+ on: December 09, 2017, 09:56:34 AM
Quote from: CryptoWatcher420 on December 09, 2017, 01:11:25 AM
Quote from: omshree on December 05, 2017, 09:31:02 PM
Quote from: CryptoWatcher420 on December 05, 2017, 07:16:34 AM
what rom flashing tool did you use?
PICkit3

ebay or amazon?

please read we have a temporary solution actually, with flashing firmware of blissz

only 3 board let me think about the D3 with have only 3 boards may be BB board got bad things to:'(
231  Alternate cryptocurrencies / Mining (Altcoins) / Re: Issue new antminer l3+ on: December 09, 2017, 12:35:08 AM
ok if i m right we have for now to flash one by one.
i was went at job after the 1st test.
!
will try that tomorrow it s too late 1h30 AM here ...

I will edit the 1st post , once we have that fix , for easy find for futur readers with this problem
blissz , thumb up as usualy
would like to send donation to you  , xrp adress may be ? fast and cheap fee or else if you have one favorite  (mp me)

@playboy333 thanks for call the test , wondering why is only 30mhs / board on your screen?
232  Alternate cryptocurrencies / Mining (Altcoins) / Re: Issue new antminer l3+ on: December 08, 2017, 12:06:19 PM
unfortunatly no , it seem to stop here , and seem in default cause fan are running 100% , but no redlight on front
233  Alternate cryptocurrencies / Mining (Altcoins) / Re: Issue new antminer l3+ on: December 08, 2017, 11:20:44 AM
Quote from: blissz on December 08, 2017, 10:59:14 AM
I am currently compiling a custom L3 firmware version for you guys. It tries to force flash the PIC's on the board. I really have no clue if this works, but I do have hope it can bring your L3's alive.

there you go:

WARNING: Don't flash this to anything else as a bricked L3(+) caused by flashing a wrong firmware version, as this might harm a working L3(+).
https://mega.nz/#!38BwlbgA!7QCxYomuSGqEb1dSWnxRl27Yo_sGKE7gIwxvtSt9UcA

let me know if it works / post your kernel log if it doesn't  Wink

thanks , just receive your MP , will try it now Smiley

edit : after reboot fan go 100% permanent even if low fan is checked, logs seem to stop after board detect and not flash ,
overview got : Hardware Version   Socket connect failed: Connection refused
SD card could be better ?
heres the logs

Quote
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.8.13 (xxl@armdev01) (gcc version 4.7.4 20130626 (prerelease) (Linaro GCC 4.7-2013.07) ) #22 SMP Tue Dec 2 15:26:11 CST 2014
[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=50c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: Generic AM33XX (Flattened Device Tree), model: TI AM335x BeagleBone
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] On node 0 totalpages: 65280
[    0.000000] free_area_init_node: node 0, pgdat c06cb100, node_mem_map c0726000
[    0.000000]   Normal zone: 512 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 64768 pages, LIFO batch:15
[    0.000000] AM335X ES1.0 (neon )
[    0.000000] PERCPU: Embedded 8 pages/cpu @c0933000 s9408 r8192 d15168 u32768
[    0.000000] pcpu-alloc: s9408 r8192 d15168 u32768 alloc=8*4096
[    0.000000] pcpu-alloc:
  • 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 64768
[    0.000000] Kernel command line: console=ttyO0,115200n8 init=/sbin/init
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] allocated 524288 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Memory: 255MB = 255MB total
[    0.000000] Memory: 238816k/238816k available, 23328k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xd0800000 - 0xff000000   ( 744 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf800000 - 0xbfe00000   (   6 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0612cf0   (6188 kB)
[    0.000000]       .init : 0xc0613000 - 0xc06554c0   ( 266 kB)
[    0.000000]       .data : 0xc0656000 - 0xc06cc020   ( 473 kB)
[    0.000000]        .bss : 0xc06cc020 - 0xc0725e3c   ( 360 kB)
[    0.000000] Hierarchical RCU implementation.
[    0.000000]    RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
[    0.000000] Total of 128 interrupts on 1 active controller
[    0.000000] OMAP clockevent source: GPTIMER1 at 24000000 Hz
[    0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[    0.000000] OMAP clocksource: GPTIMER2 at 24000000 Hz
[    0.000000] Console: colour dummy device 80x30
[    0.000357] Calibrating delay loop... 545.07 BogoMIPS (lpj=531968)
[    0.015443] pid_max: default: 32768 minimum: 301
[    0.015671] Security Framework initialized
[    0.015767] Mount-cache hash table entries: 512
[    0.024586] Initializing cgroup subsys cpuacct
[    0.024620] Initializing cgroup subsys memory
[    0.024683] Initializing cgroup subsys blkio
[    0.024821] CPU: Testing write buffer coherency: ok
[    0.025391] CPU0: thread -1, cpu 0, socket -1, mpidr 0
[    0.025469] Setting up static identity map for 0x8038c820 - 0x8038c86c
[    0.026793] Brought up 1 CPUs
[    0.026816] SMP: Total of 1 processors activated (545.07 BogoMIPS).
[    0.028114] devtmpfs: initialized
[    0.092508] pinctrl core: initialized pinctrl subsystem
[    0.092721] rstctl core: initialized rstctl subsystem
[    0.093212] regulator-dummy: no parameters
[    0.093779] NET: Registered protocol family 16
[    0.094482] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.104170] pinctrl-single 44e10800.pinmux: prop pinctrl-0 index 0 invalid phandle
[    0.104356] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
[    0.105451] platform 49000000.edma: alias fck already exists
[    0.105484] platform 49000000.edma: alias fck already exists
[    0.105512] platform 49000000.edma: alias fck already exists
[    0.106660] gpiochip_add: registered GPIOs 0 to 31 on device: gpio
[    0.106843] OMAP GPIO hardware version 0.1
[    0.108246] gpiochip_add: registered GPIOs 32 to 63 on device: gpio
[    0.109562] gpiochip_add: registered GPIOs 64 to 95 on device: gpio
[    0.110884] gpiochip_add: registered GPIOs 96 to 127 on device: gpio
[    0.111516] of_get_named_gpio_flags exited with status 52
[    0.111547] gpio-rctrl rstctl.3: loaded OK
[    0.116646] omap-gpmc 50000000.gpmc: GPMC revision 6.0
[    0.119843] hw-breakpoint: debug architecture 0x4 unsupported.
[    0.122020] cpsw.0: No hwaddr in dt. Using 50:33:8b:04:40:4d from efuse
[    0.122052] cpsw.1: No hwaddr in dt. Using 50:33:8b:04:40:4f from efuse
[    0.137596] bio: create slab <bio-0> at 0
[    0.149725] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver
[    0.149965] of_get_named_gpio_flags: can't parse gpios property
[    0.150251] vmmcsd_fixed: 3300 mV
[    0.153368] SCSI subsystem initialized
[    0.153824] usbcore: registered new interface driver usbfs
[    0.153938] usbcore: registered new interface driver hub
[    0.154274] usbcore: registered new device driver usb
[    0.156367] omap_i2c 4819c000.i2c: bus 0 rev0.11 at 100 kHz
[    0.156400] omap_i2c 4819c000.i2c: unable to select pin group
[    0.156594] media: Linux media interface: v0.10
[    0.156689] Linux video capture interface: v2.00
[    0.156807] pps_core: LinuxPPS API ver. 1 registered
[    0.156823] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.157542] Advanced Linux Sound Architecture Driver Initialized.
[    0.158741] Switching to clocksource gp_timer
[    0.176761] NET: Registered protocol family 2
[    0.177757] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[    0.177846] TCP bind hash table entries: 2048 (order: 3, 40960 bytes)
[    0.177936] TCP: Hash tables configured (established 2048 bind 2048)
[    0.178029] TCP: reno registered
[    0.178056] UDP hash table entries: 256 (order: 1, 12288 bytes)
[    0.178101] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
[    0.178593] NET: Registered protocol family 1
[    0.179187] RPC: Registered named UNIX socket transport module.
[    0.179208] RPC: Registered udp transport module.
[    0.179222] RPC: Registered tcp transport module.
[    0.179236] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.179619] Trying to unpack rootfs image as initramfs...
[    1.934124] Freeing initrd memory: 12100K
[    1.934850] CPU PMU: probing PMU on CPU 0
[    1.934882] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
[    1.935414] omap2_mbox_probe: platform not supported
[    1.939313] VFS: Disk quotas dquot_6.5.2
[    1.939550] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.940956] NFS: Registering the id_resolver key type
[    1.941050] Key type id_resolver registered
[    1.941068] Key type id_legacy registered
[    1.941133] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[    1.941592] msgmni has been set to 490
[    1.944483] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.944510] io scheduler noop registered
[    1.944526] io scheduler deadline registered
[    1.944584] io scheduler cfq registered (default)
[    1.948656] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.951092] omap_uart 44e09000.serial: did not get pins for uart0 error: -19
[    1.951380] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88) is a OMAP UART0
[    2.612216] console [ttyO0] enabled
[    2.616753] 48022000.serial: ttyO1 at MMIO 0x48022000 (irq = 89) is a OMAP UART1
[    2.625415] 48024000.serial: ttyO2 at MMIO 0x48024000 (irq = 90) is a OMAP UART2
[    2.634099] 481a8000.serial: ttyO4 at MMIO 0x481a8000 (irq = 61) is a OMAP UART4
[    2.642707] 481aa000.serial: ttyO5 at MMIO 0x481aa000 (irq = 62) is a OMAP UART5
[    2.651734] [drm] Initialized drm 1.1.0 20060810
[    2.670416] brd: module loaded
[    2.680714] loop: module loaded
[    2.684931] bone-capemgr bone_capemgr.8: Failed to find baseboard eeprom node
[    2.694913] nand_get_flash_type: 2c,da against 2c,da
[    2.700437] ONFI param page 0 valid
[    2.704109] ONFI flash detected
[    2.707428] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xda (Micron MT29F2G08ABAEAWP), 256MiB, page size: 2048, OOB size: 64
[    2.719341] omap2-nand: detected x8 NAND flash
[    2.724007] nand: using OMAP_ECC_BCH8_CODE_HW ECC scheme
[    2.729589] omap2-nand: using custom ecc layout
[    2.734428] 10 ofpart partitions found on MTD device omap2-nand.0
[    2.740820] Creating 10 MTD partitions on "omap2-nand.0":
[    2.746497] 0x000000000000-0x000000020000 : "spl"
[    2.753311] 0x000000020000-0x000000040000 : "spl_backup1"
[    2.760751] 0x000000040000-0x000000060000 : "spl_backup2"
[    2.768126] 0x000000060000-0x000000080000 : "spl_backup3"
[    2.775541] 0x000000080000-0x000000240000 : "u-boot"
[    2.783775] 0x000000240000-0x000000260000 : "bootenv"
[    2.790717] 0x000000260000-0x000000280000 : "fdt"
[    2.797295] 0x000000280000-0x000000780000 : "kernel"
[    2.808326] 0x000000800000-0x000001c00000 : "root"
[    2.831826] 0x000001c00000-0x000003000000 : "config"
[    2.855616] OneNAND driver initializing
[    2.861360] usbcore: registered new interface driver asix
[    2.867176] usbcore: registered new interface driver cdc_ether
[    2.873423] usbcore: registered new interface driver smsc95xx
[    2.879572] usbcore: registered new interface driver net1080
[    2.885594] usbcore: registered new interface driver cdc_subset
[    2.891888] usbcore: registered new interface driver zaurus
[    2.897895] usbcore: registered new interface driver cdc_ncm
[    2.904623] usbcore: registered new interface driver cdc_acm
[    2.910580] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    2.918961] Initializing USB Mass Storage driver...
[    2.924203] usbcore: registered new interface driver usb-storage
[    2.930502] USB Mass Storage support registered.
[    2.935542] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
[    2.942294] musb-hdrc musb-hdrc.0.auto: pdev->id = 0
[    2.947533] musb-hdrc musb-hdrc.0.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
[    2.956304] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[    2.956325] musb-hdrc: MHDRC RTL version 2.0
[    2.956340] musb-hdrc: setup fifo_mode 4
[    2.956368] musb-hdrc: 28/31 max ep, 16384/16384 memory
[    2.956515] musb-hdrc musb-hdrc.0.auto: *** mode=3
[    2.961574] musb-hdrc musb-hdrc.0.auto: *** power=250
[    2.967638] musb-hdrc musb-hdrc.1.auto: pdev->id = 1
[    2.972880] musb-hdrc musb-hdrc.1.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
[    2.981652] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[    2.981672] musb-hdrc: MHDRC RTL version 2.0
[    2.981685] musb-hdrc: setup fifo_mode 4
[    2.981708] musb-hdrc: 28/31 max ep, 16384/16384 memory
[    2.981849] musb-hdrc musb-hdrc.1.auto: *** mode=1
[    2.986893] musb-hdrc musb-hdrc.1.auto: *** power=250
[    2.992201] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
[    2.998578] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1
[    3.007051] musb-hdrc musb-hdrc.1.auto: supports USB remote wakeup
[    3.007160] usb usb1: default language 0x0409
[    3.007217] usb usb1: udev 1, busnum 1, minor = 0
[    3.007241] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    3.014386] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.021961] usb usb1: Product: MUSB HDRC host driver
[    3.027176] usb usb1: Manufacturer: Linux 3.8.13 musb-hcd
[    3.032844] usb usb1: SerialNumber: musb-hdrc.1.auto
[    3.038832] usb usb1: usb_probe_device
[    3.038862] usb usb1: configuration #1 chosen from 1 choice
[    3.038928] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[    3.039127] hub 1-0:1.0: usb_probe_interface
[    3.039150] hub 1-0:1.0: usb_probe_interface - got id
[    3.039178] hub 1-0:1.0: USB hub found
[    3.043182] hub 1-0:1.0: 1 port detected
[    3.047321] hub 1-0:1.0: standalone hub
[    3.047341] hub 1-0:1.0: individual port power switching
[    3.047359] hub 1-0:1.0: no over-current protection
[    3.047377] hub 1-0:1.0: Single TT
[    3.047397] hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
[    3.047417] hub 1-0:1.0: power on to power good time: 10ms
[    3.047473] hub 1-0:1.0: local power source is good
[    3.047622] hub 1-0:1.0: enabling power on all ports
[    3.048673] mousedev: PS/2 mouse device common for all mice
[    3.056644] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0
[    3.064147] 44e3e000.rtc: already running
[    3.068646] i2c /dev entries driver
[    3.073705] pps_ldisc: PPS line discipline registered
[    3.079187] Driver for 1-wire Dallas network protocol.
[    3.086442] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
[    3.094018] cpuidle: using governor ladder
[    3.098347] cpuidle: using governor menu
[    3.102920] of_get_named_gpio_flags exited with status 6
[    3.102940] of_get_named_gpio_flags: can't parse gpios property
[    3.102956] of_get_named_gpio_flags: can't parse gpios property
[    3.102992] omap_hsmmc mmc.4: of_parse_phandle_with_args of 'reset' failed
[    3.110213] omap_hsmmc mmc.4: Failed to get rstctl; not using any
[    3.117021] edma-dma-engine edma-dma-engine.0: allocated channel for 0:25
[    3.124244] edma-dma-engine edma-dma-engine.0: allocated channel for 0:24
[    3.131599] mmc.4 supply vmmc_aux not found, using dummy regulator
[    3.138534] omap_hsmmc mmc.4: pins are not configured from the driver
[    3.149196] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
[    3.173114] of_get_named_gpio_flags exited with status -517
[    3.173181] platform gpio-leds.7: Driver leds-gpio requests probe deferral
[    3.180962] ledtrig-cpu: registered to indicate activity on CPUs
[    3.187742] edma-dma-engine edma-dma-engine.0: allocated channel for 0:36
[    3.194940] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
[    3.203103] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
[    3.209406] edma-dma-engine edma-dma-engine.0: allocated channel for 0:5
[    3.216580] edma-dma-engine edma-dma-engine.0: allocated channel for 0:6
[    3.228825] usbcore: registered new interface driver usbhid
[    3.234740] usbhid: USB HID core driver
[    3.241655] TCP: cubic registered
[    3.245183] Initializing XFRM netlink socket
[    3.249762] NET: Registered protocol family 17
[    3.254625] NET: Registered protocol family 15
[    3.259472] Key type dns_resolver registered
[    3.264116] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[    3.272228] ThumbEE CPU extension supported.
[    3.276742] Registering SWP/SWPB emulation handler
[    3.282754] registered taskstats version 1
[    3.289376] of_get_named_gpio_flags exited with status -517
[    3.289452] platform gpio-leds.7: Driver leds-gpio requests probe deferral
[    3.346395] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
[    3.352844] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
[    3.367334] libphy: 4a101000.mdio: probed
[    3.371654] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
[    3.381888] Detected MACID = 50:33:8b:04:40:4d
[    3.386572] cpsw 4a100000.ethernet: NAPI disabled
[    3.391966] of_get_named_gpio_flags exited with status -517
[    3.392032] platform gpio-leds.7: Driver leds-gpio requests probe deferral
[    3.400775] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
[    3.410061] cpu0 supply cpu0 not found, using dummy regulator
[    3.416545] cpufreq_cpu0: failed to scale voltage up: -22
[    3.422366] cpufreq_cpu0: failed to scale voltage up: -22
[    3.435148] ALSA device list:
[    3.438381]   No soundcards found.
[    3.442923] Freeing init memory: 264K
[    3.446979] Failed to execute /init
[    4.465849] jffs2: notice: (122) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[    5.777413] net eth0: initializing cpsw version 1.12 (0)
[    5.786472] net eth0: phy found : id is : 0x7c0f1
[    5.791912] libphy: PHY 4a101000.mdio:01 not found
[    5.797108] net eth0: phy 4a101000.mdio:01 not found on slave 1
[    8.864483] libphy: 4a101000.mdio:00 - Link is Up - 100/Full
Dec  8 11:29:30 (none) local0.err cgminer: Miner compile time: Fri Aug 25 17:28:57 CST 2017 type: Antminer L3+
Dec  8 11:29:30 (none) local0.warn cgminer: Started cgminer 4.9.0
Dec  8 11:29:30 (none) local0.notice cgminer[374]:  detected at /sys/class/gpio/gpio51/value  chain 0
Dec  8 11:29:30 (none) local0.notice cgminer[374]:  detected at /sys/class/gpio/gpio48/value  chain 1
Dec  8 11:29:30 (none) local0.notice cgminer[374]:  detected at /sys/class/gpio/gpio47/value  chain 2
Dec  8 11:29:30 (none) local0.notice cgminer[374]:  detected at /sys/class/gpio/gpio44/value  chain 3
Dec  8 11:29:30 (none) local0.notice cgminer[374]: detect total chain num 4
Dec  8 11:29:30 (none) local0.notice cgminer[374]: i2c init ok
234  Alternate cryptocurrencies / Mining (Altcoins) / Re: Antminer D3 Blissz firmware (02/11 v1.1 update) on: December 06, 2017, 09:19:00 PM
Quote from: blissz on December 06, 2017, 09:15:36 PM
It;s prohashing related. I actually found what's the problem so it will be fixed in the next release
ok , fine Smiley
235  Alternate cryptocurrencies / Mining (Altcoins) / Re: Antminer D3 Blissz firmware (02/11 v1.1 update) on: December 06, 2017, 09:12:07 PM
Quote from: blissz on December 06, 2017, 07:48:23 PM
Quote from: DragosD1 on December 06, 2017, 06:59:10 PM
Quote from: blissz on December 06, 2017, 06:48:20 PM
Quote from: DragosD1 on December 06, 2017, 03:29:55 PM
As Nicehash is down, my miners lost in DevPools I think. They don't use 2nd pool or 3rd pool, which both are alive, last seen there 6 hours ago. Attached kernel log can say more...

FfE1W]https[Suspicious link removed]FfE1W

https://drive.google.com/open?id=1r7fd5skHXOkMY6qNxvBK8Cld-5NLqHvI

....seems i cannot attach txt anymore, so....


Dec  6 08:44:21 (none) local0.warn cgminer[362]: Lost 9 shares due to stratum disconnect on pool 0
Dec  6 08:44:21 (none) local0.warn cgminer[362]: Pool 0 stratum share submission failure
Dec  6 08:44:27 (none) local0.warn cgminer[362]: Pool 0 stratum+tcp://x11.eu.nicehash.com:3336 not responding!
Dec  6 08:44:27 (none) local0.warn cgminer[362]: Switching to pool 1 stratum+tcp://hub.miningpoolhub.com:17007
Dec  6 08:58:13 (none) local0.warn cgminer[362]: Switching to pool 3 stratum+tcp://dash.suprnova.cc:9995

It worked perfectly normal as what I see from your log. It switched to your 1st pool after nicehash went down. Of course it switches to the dev pool every 2 hours (the last line).

Blissz, check picture in the same post, last seen alive, last column on miner status...
Fact is at the time of kernel save was not mining Nicehash(normally, down) but not MiningPool either, which was 2nd alive pool. Still, miner showing 18 k Gh....where??

I see the picture now and the LS time is strange... I will have a look at it

edit: nevermind I checked your kernel log again: you're not on the latest version. This is a known bug on v1.01 (see the changelog). Please upgrade to v1.1

i'm in 1v1 , and i seem have this sort of issue to, dont come back auto to pool 0 , at least with prohasing in priority ... when i restart miner it connect again

Quote
Switching to pool 0 stratum+tcp://prohashing.com:3333
Dec  6 19:50:06 (none) local0.warn cgminer[21504]: Lost 1 shares due to no stratum share response from pool 0
Dec  6 19:50:41 (none) local0.warn cgminer[21504]: Lost 1 shares due to no stratum share response from pool 0
Dec  6 19:50:48 (none) local0.warn cgminer[21504]: Lost 2 shares due to stratum disconnect on pool 0
Dec  6 19:50:49 (none) local0.warn cgminer[21504]: Pool 0 stratum+tcp://prohashing.com:3333 not responding!
Dec  6 19:50:49 (none) local0.warn cgminer[21504]: Switching to pool 1 stratum+tcp://X11.mine.zpool.ca:3533
Dec  6 19:50:55 (none) local0.warn cgminer[21504]: Switching to pool 3 stratum+tcp://dash.suprnova.cc:9995
Dec  6 19:52:47 (none) local0.warn cgminer[21504]: Switching to pool 1 stratum+tcp://X11.mine.zpool.ca:3533
Dec  6 20:11:03 (none) local0.warn cgminer[21504]: Lost 1 shares due to no stratum share response from pool 1
Dec  6 20:15:45 (none) local0.warn cgminer[21504]: Pool 1 stratum+tcp://X11.mine.zpool.ca:3533 not responding!
Dec  6 20:15:45 (none) local0.warn cgminer[21504]: Switching to pool 0 stratum+tcp://prohashing.com:3333
Dec  6 20:16:16 (none) local0.warn cgminer[21504]: Pool 1 stratum+tcp://X11.mine.zpool.ca:3533 alive, testing stability
Dec  6 20:16:31 (none) local0.warn cgminer[21504]: Pool 0 stratum+tcp://prohashing.com:3333 not responding!
Dec  6 20:16:31 (none) local0.warn cgminer[21504]: Switching to pool 1 stratum+tcp://X11.mine.zpool.ca:3533
Dec  6 20:17:13 (none) local0.warn cgminer[21504]: Lost 2 shares due to no stratum share response from pool 1
Dec  6 20:17:18 (none) local0.warn cgminer[21504]: Lost 1 shares due to no stratum share response from pool 1
Dec  6 20:17:31 (none) local0.warn cgminer[21504]: Lost 1 shares due to no stratum share response from pool 1
Dec  6 20:17:36 (none) local0.warn cgminer[21504]: Lost 2 shares due to no stratum share response from pool 1
Dec  6 20:17:38 (none) local0.warn cgminer[21504]: Lost 1 shares due to no stratum share response from pool 1
Dec  6 20:17:46 (none) local0.warn cgminer[21504]: Lost 3 shares due to no stratum share response from pool 1
Dec  6 20:27:37 (none) local0.warn cgminer[21504]: Pool 1 stratum+tcp://X11.mine.zpool.ca:3533 not responding!
Dec  6 20:27:37 (none) local0.warn cgminer[21504]: Switching to pool 0 stratum+tcp://prohashing.com:3333
Dec  6 20:28:09 (none) local0.warn cgminer[21504]: Pool 1 stratum+tcp://X11.mine.zpool.ca:3533 alive, testing stability
Dec  6 20:29:16 (none) local0.warn cgminer[21504]: Lost 1 shares due to no stratum share response from pool 1
Dec  6 20:29:39 (none) local0.warn cgminer[21504]: Lost 1 shares due to no stratum share response from pool 1
Dec  6 20:30:09 (none) local0.warn cgminer[21504]: Pool 1 stratum+tcp://X11.mine.zpool.ca:3533 stable for >120 seconds
Dec  6 20:30:09 (none) local0.warn cgminer[21504]: Switching to pool 1 stratum+tcp://X11.mine.zpool.ca:3533
Dec  6 20:56:23 (none) local0.warn cgminer[21504]: Pool 1 stratum+tcp://X11.mine.zpool.ca:3533 not responding!
Dec  6 20:56:23 (none) local0.warn cgminer[21504]: Switching to pool 0 stratum+tcp://prohashing.com:3333
Dec  6 20:56:56 (none) local0.warn cgminer[21504]: Pool 1 stratum+tcp://X11.mine.zpool.ca:3533 alive, testing stability
Dec  6 20:57:33 (none) local0.warn cgminer[21504]: Lost 1 shares due to no stratum share response from pool 1
Dec  6 20:57:38 (none) local0.warn cgminer[21504]: Lost 1 shares due to no stratum share response from pool 1
Dec  6 20:57:51 (none) local0.warn cgminer[21504]: Lost 1 shares due to no stratum share response from pool 1
Dec  6 20:57:56 (none) local0.warn cgminer[21504]: Lost 1 shares due to no stratum share response from pool 1
Dec  6 20:58:23 (none) local0.warn cgminer[21504]: Lost 1 shares due to no stratum share response from pool 1
Dec  6 20:58:56 (none) local0.warn cgminer[21504]: Pool 1 stratum+tcp://X11.mine.zpool.ca:3533 stable for >120 seconds
Dec  6 20:58:56 (none) local0.warn cgminer[21504]: Switching to pool 1 stratum+tcp://X11.mine.zpool.ca:3533
[...]
236  Alternate cryptocurrencies / Mining (Altcoins) / Re: Issue new antminer l3+ on: December 02, 2017, 05:29:46 PM
Quote from: gians82 on December 02, 2017, 04:06:02 PM
Hello,

I activated today in my new antminer l3 + but I have the exact same problem, it does not recognize any Hashboard.

I opened ticket to bitmain. (*the product is new has never been used.)

how did you solve this problem?

Thanks

*I can not open antminer because I lose the guarantee.
bitmain will told to open , and sent them hashboard ... where come from your miner ?
237  Alternate cryptocurrencies / Mining (Altcoins) / Re: Antminer D3 Blissz firmware (29/11 v1.01 update) on: December 01, 2017, 08:43:48 PM
Quote from: D3 Antminer on December 01, 2017, 08:26:34 PM
may be it is real ?

https://www.inginer.xyz/


"We need your financial support. As you already know, we are a non-profit team, but some team members without whom the project will not be done , will not work for thanks. Likewise, we need to get more D3's for ASIC designers, developers and for an Alpha test with reliable statistics. At the moment the project is funded by us. That's why we need your donations now, so the project can go further."

i cant stop laught of loud man
238  Alternate cryptocurrencies / Mining (Altcoins) / Re: Antminer D3 Blissz firmware (29/11 v1.01 update) on: December 01, 2017, 03:40:53 PM
Quote from: microtechies on December 01, 2017, 02:42:36 PM
Quote from: Sjouk on December 01, 2017, 02:24:49 PM
Quote from: dganm on December 01, 2017, 06:11:09 AM
Hi!

I installed Blissz firmware in my d3's and I made a mistake copying the cgminer archive from /usr/bin from one of the d3 to an l3+ I have too.

Of course it started up in the l3+ with the --scrypt param but it didn't mine anything.

I flashed my l3+ to stock again but now it doesn't recognize any of the chains on my l3+!

I'm begining to enter in panic! Could somebody help me with that? What should I do?

I think is because some additional files created or some script running in parallel with cgminer. I don't know really but that file is the only I changed "trying to not touch the filesystem" :S.

By the way, Is there any plan to make a firmware for l3's? It would be nice! on d3's are running amazing.

Thanks in advance.

BLISSZ  .....

Can you please help us....
There are many more  who did this....;(  Angry  Shocked

Please give us a hand...



Bitmain sent me a replacement control board for free. Even thought I said it was my mistake and put the wrong firmware on it. From opening of ticket to delivery it was 7 days to the UK. Not bad shame the rest of the business couldn't be that smooth

control board will not change nothing , i try with an other one , hashboards are fail , i ever told taht

@Blissz please answer to mp Smiley
239  Alternate cryptocurrencies / Announcements (Altcoins) / Re: CannabisCoin [CANN][X11][Official] Developments & Discussions on: November 30, 2017, 09:08:18 PM
Hi friends , i m actually learning to set up a pool, cause for me there is no good pools for CANN , some p2p and they are cheating with fee ... and other dont not accept cgminer
 , I succefully install everything , and actually sync the chain from node.js launch ... i fastly put an exchange wallet adress , how can i set up a new adress with private key with linux shell ?
dont find the wallet commands ...

regards
240  Alternate cryptocurrencies / Mining (Altcoins) / Re: Issue new antminer l3+ on: November 28, 2017, 02:31:30 PM
Quote from: Egorrichminer on November 26, 2017, 10:45:14 PM
Hi Folks!

Absolutely the same stuff I'm having now with my L3+ too.

I had a well working L3+, then by mistake flashed it with D3 firmware (instead of different ASIC device... to fix the "x" issue solved in the 20th of November 2017 formware for D3). After that I immediately re-flashed back to the L3+ firmware but got what i got, Zero chips on each of the four hash-blades...

I tried all the stuff including Micri SD image as did here and the same it didn't help.

I also need this suggestion on which hex file to take and from where (the path) on the correctly working hash blade from another L3+. So I "ssh" the L3+ and should "scp" the file ?? to the same location on the malfunctioning L3+ (do that for all 4 blades) and then reboot. Cirrect? Which path to the file then guys?

Please help.

Thanks,
Egor



need to plug programmation stuff in 6 holes on the right of eeprom texas , and extract hexa file from a working l3+ hashboard, then flash it manually on the fail board $

and share the hexa file for some of us have only one fail l3+ but no other to fix Smiley
Pages: « 1 2 3 4 5 6 7 8 9 10 11 [12] 13 14 15 16 17 18 »
Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2006-2009, Simple Machines Valid XHTML 1.0! Valid CSS!