I'm sorry, I don't want neither to hijack the post of the @OP nor to increase my paid posts but I found the chance and I would like to ask how this happened? I mean the same time two different explorers, blockchain.info and blocktrail, to show different results? Yeah i want to ask the same think how could be this possible that blocktrail is showing confirmations but blockchain.info isn't showing any and showing double spend! This is your transaction. It paid a low fee of 55.423 sat/B. https://blockchain.info/tx/efdea60593f9cf98907b4410d5b4a054d7b7c18f6510134c8c53bc83e80e52bfThis is the confirmed double spend transaction. It paid a higher fee of 200.889 sat/B https://blockchain.info/tx/b1bc2a8b6efb86b16b86c5c9cd284aeb227c5c5e76ef8b6617836400c6dd3658This address 17jjXhAt6yT2Lsr7mm1YRbw1xiv7zqm222 spent the same 0.041254 Bitcoins twice in two different transactions, one with a low fee, and the other with a higher fee. In that situation the miners are likely to confirm the transaction with the higher fee and ignore the other because they get paid the fees. Most wallets won't let you spend the same coins twice, but a few of them will.
|
|
|
Accelerated I managed to submit it to the free viabtc accelerator, so you don't have to pay a miner, or to use the paid one. Unfortunately you will have to wait until the viabtc pool mines its next block before it confirms your transaction. There's a list of its last blocks here. https://blockchain.info/blocks/ViaBTCIf you are very desparate for confirmation you could pay quickseller or macbook-air to get f2pool to confirm your transaction. Click their names in the quote below to open a page where you can pm them. If you do that then your transaction might get confirmed faster if f2pool mines a block before viabtc. You can contact either quickseller or macbook-air and offer a small payment to get your transaction confirmed fast. This quote gives an example of how much they charge... I faced a similar issue a few days back transaction not getting confirmed due to low fee but user "QuickSeller" got my transaction confirmed in minutes when I sent him 0.0001 BTC. He has access to some pool . PM him.
They can get F2Pool to confirm your transaction, so when it mines another block your transaction will probably get confirmed. You can see the times it mined its latest blocks here. https://blockchain.info/blocks/F2Poolthank you send me your wallet address You can find it in my profile page here. The viabtc pool mines blocks at random times. Sometimes its blocks are a few hours apart, and sometimes they are twelve hours apart. It mined its last block less than an hour ago, so hopefully it will mine its next and confirm your transaction in a few hours.
|
|
|
Accelerated I managed to submit it to the free viabtc accelerator, so you don't have to pay a miner, or to use the paid one. Unfortunately you will have to wait until the viabtc pool mines its next block before it confirms your transaction. There's a list of its last blocks here. https://blockchain.info/blocks/ViaBTCIf you are very desparate for confirmation you could pay quickseller or macbook-air to get f2pool to confirm your transaction. Click their names in the quote below to open a page where you can pm them. If you do that then your transaction might get confirmed faster if f2pool mines a block before viabtc. You can contact either quickseller or macbook-air and offer a small payment to get your transaction confirmed fast. This quote gives an example of how much they charge... I faced a similar issue a few days back transaction not getting confirmed due to low fee but user "QuickSeller" got my transaction confirmed in minutes when I sent him 0.0001 BTC. He has access to some pool . PM him.
They can get F2Pool to confirm your transaction, so when it mines another block your transaction will probably get confirmed. You can see the times it mined its latest blocks here. https://blockchain.info/blocks/F2Pool
|
|
|
Your transaction has inputs from this unconfirmed parent transaction. https://blockchain.info/tx/9b153bf6fc044afc033f4d55a48b1032cad7d7a11df9f8a25a2a150747fc60dfYour transaction can't confirm until that parent transaction confirms. Your transaction pays a 121.071 sat/B fee, and its unconfirmed parent pays a 132.389 sat/B fee. That's high enough to use the free accelerator. If you use it then you need to put the unconfirmed parent into it first, before you put your transaction into it.
|
|
|
I know about this. I need people to find the issue or the transaction causing this not to confirm and accelerate that one too.
I couldn't find any unconfirmed parent transactions stopping yours confirming, and it has no double spends I could find. I think the reason it's taking so long is it only pays a 122.85 sat/B fee, and the networks's overloaded with almost a quarter of a million unconfirmed transactions. For fast confirmation today you need to pay a 420 satoshis/byte fee according to https://bitcoinfees.21.co/
|
|
|
The free viabtc is very popular at present, and it's difficult to get included in the first 100 transactions an hour that it accelerates for free. However, viabtc now also provides a paid accelerator service. If you want to pay to use it you have to email support@viabtc.com, and it costs 0.01BTC per transaction. The bottom of the free accelerator page shows this quoted text. https://www.viabtc.com/tools/txaccelerator/Do you have paid accelerator service? ViaBTC’s Transaction Accelerator is a FREE service for the community. We also provide manual accelerator service for special cases (dire urgency, extremely low transaction fee etc.) and require a donation of 0.01BTC for each transaction. Please contact support@viabtc.com for details.
|
|
|
Yeah, it sounds like you are attempting to send the transaction with too low of a fee.
Coinb.in spits out that same error message when you try to broadcast a raw transaction with an extremely low fee. The screenshot below was from when I tried broadcasting someone's transaction that only paid 1 sat/B. Maybe coinb.in uses an electrum server in its backend. https://coinb.in/#broadcast
|
|
|
I paid $2 in transaction fees 12 hours ago and still my transaction is still pending, if paying higher transaction doesn't guarantee faster processing, then what's the use at all.
If you are stuck the ViaBTC accelerator works. ViaBTC confirmed Joel_Jantsen's stuck transaction in block number 466914 when it mined it. https://blockchain.info/tx/b191e996b02819c69dae9beff09c1afb81568d2141dd9561e991962593795953Did your transaction have a lot of inputs? If it's got a lot of inputs you have to pay a higher fee. If you make sure it's only got one input, then paying a $2 fee should get it confirmed in the next block.
|
|
|
Yes, it either states ID not valid or states 'Your remaining Customer-Only use: 0 Times'.
One of the inputs to your transaction is unconfirmed. Your transaction can't confirm until this transaction confirms. https://blockchain.info/tx/1b7dbaf6b2f97d53730a2224e65afddf4a21a30322bb7f95142aa32ac34ff22fSubmit the transaction above to the viabtc accelerator first, and after its accepted it then submit your transaction to it. The viabtc accelerator won't accept transactions with unconfirmed inputs like yours. I've tried the free option, but I get this message - 'Your remaining Customer-Only use: 0 Times' and I've tried emailing them for the paid service but no response to my email which was sent about 14 hours ago. Any other options? Yes, try contacting quickseller and macbook-air and offering either of them a small fee to confirm your transaction. Click their names in the quote below to open a page where you can pm them. They must be snowed under with similar requests, but it's worth trying. You can contact either quickseller or macbook-air and offer a small payment to get your transaction confirmed fast. This quote gives an example of how much they charge... I faced a similar issue a few days back transaction not getting confirmed due to low fee but user "QuickSeller" got my transaction confirmed in minutes when I sent him 0.0001 BTC. He has access to some pool . PM him.
They can get F2Pool to confirm your transaction, so when it mines another block your transaction will probably get confirmed. You can see the times it mined its latest blocks here. https://blockchain.info/blocks/F2Pool
|
|
|
Why do you want to cancel your transaction? Did you accidentally send it somewhere you didn't want it to go, or is it just taking too long to confirm?
|
|
|
Yes, it either states ID not valid or states 'Your remaining Customer-Only use: 0 Times'.
One of the inputs to your transaction is unconfirmed. Your transaction can't confirm until this transaction confirms. https://blockchain.info/tx/1b7dbaf6b2f97d53730a2224e65afddf4a21a30322bb7f95142aa32ac34ff22fSubmit the transaction above to the viabtc accelerator first, and after its accepted it then submit your transaction to it. The viabtc accelerator won't accept transactions with unconfirmed inputs like yours.
|
|
|
I successfully submitted your transaction to the viabtc accelerator service. Now the viabtc pool will confirm your transaction in the next block it mines if it hasn't confirmed before then. You can find a list of its most recent blocks at this link. It usually mines at least a few a day. https://blockchain.info/blocks/ViaBTC
|
|
|
Your transaction is final, its opted out of replace by fee so you can't use that technique. You could try the free viabtc mining pool's transaction acceleration service at this link, but it only accepts 100 transactions an hour and it's overloaded with requests. https://www.viabtc.com/tools/txaccelerator/Viabtc now also provides a paid acceleration service. It costs 0.01BTC to use its paid service, and you have to email support@viabtc.com to use it. You could try could paying viabtc 0.01BTC to confirm your transaction. There is a link at the bottom of the free accelerator webpage. Do you have paid accelerator service? After you click it this text explaining how it works is revealed. ViaBTC’s Transaction Accelerator is a FREE service for the community. We also provide manual accelerator service for special cases (dire urgency, extremely low transaction fee etc.) and require a donation of 0.01BTC for each transaction. Please contact support@viabtc.com for details. As achow101 says you could try contacting quickseller and macbook-air and offering them a small fee to confirm your transaction. Click their names in the quote below to open a page where you can pm them. You can contact either quickseller or macbook-air and offer a small payment to get your transaction confirmed fast. This quote gives an example of how much they charge... I faced a similar issue a few days back transaction not getting confirmed due to low fee but user "QuickSeller" got my transaction confirmed in minutes when I sent him 0.0001 BTC. He has access to some pool . PM him.
They can get F2Pool to confirm your transaction, so when it mines another block your transaction will probably get confirmed. You can see the times it mined its latest blocks here. https://blockchain.info/blocks/F2Pool
|
|
|
A mycelium wallet running on an older android might also be able to import multibit wallet words. The quote below explains what to do, but I'm not sure if it works because I don't know of anyone who's tested it yet. Apparently you have to use the "Rescan Account" option after importing your wallet words.
Mycelium uses a different derivation path (m/44'/0'/0'/0 AKA BIP44) so it doesn't work with MultiBit HD keys. I've only managed to find Breadwallet so far... I tested using a multibit HD version 0.5.1 seed in mycelium and it didn't work. I hadn't checked mycelium's derivation path or the available options for restoring from seed until now. This information from github must either be out of date, inaccurate, or I did something wrong. https://github.com/keepkey/multibit-hd/issues/687The addresses generated between Mycelium and MultiBit HD are the same for the Account 1. Unfortunately there seem to be some optimisations in Mycelium that mean that they are not fully interoperable. Both Mycelium and MBHD have 'full rescans' where you (most likely) see everything but this is not practical for daily use. This is the seed I used. into forward amateur treat buddy grow coral fog tiger always stereo lens It generated this additional datestamp 3056/49 These are the first 3 addresses it generated. 1Gvho6MYAYsftYG7BoQauErYf2SBSTpfAV
1BVjPuhUz8n2tpmtD2LCoLXwPZhQQdcaXT
17okta5nPVb5PPkWAacaz335aMpA2KAdbu When testing the seed phrase in mycelium it asked "do you want to restore a backup or create a new wallet". I selected "restore backup" with a 12 words length word list. This is the first address it generated. 18QKtoFQKqaLrVyUHhPMpM4o1JwQBW7CAA Mycelium lets you add an optional password to your seed phrase, so I tried restoring a new wallet by checking both the 12 words option and the "I have a passphrase" option, and using the 3056/49 datestamp as password. It generated this address. 19wg4dnpW5Jz19K2yWAmeYpDSWXMQqjMhN Finally I tried using my multibit password "a" as a mycelium password, and it generated this address. 12j5iegPjaDTebJWWAs3sFc45tuDB64D7b
|
|
|
So I opted for Bread Wallet. Once it synced the two transactions show up as "unverified" and give the following id's:
e91404a42ea2b86a6f81fb674dd1e549fdcc8d4401529c1712d2d7d3c75e8e0d
09b7ce65b6a4136b31f53a356433b1594122e978fe356de23b9447c65985b9b1
Looks like they're back on the blockchain with the inital low (or 0) fees. Would you suggest closing the app and waiting it out once again?
Thanks for all your help,
I'm not sure what's the best thing to do. I tried the first transaction in the viabtc accelerator, but it said "acceleration failed" which is a message I don't think I have seen before. I have seen "submissions are beyond limit.", and "transaction doesn't exist", but not "acceleration failed". I suppose it depends how urgently you want the situation resolved. If it's urgent and how are prepared to pay you could contact support@viabtc.com and arrange to pay 0.01BTC to get each transaction confirmed using its paid service.
|
|
|
Thanks for the reply.
I'm unfortunately using Multibit HD, which doesn't seem to give you the option of exporting private keys. Should I attempt my wallet seed phrase in Electrum?
A multibit seed phrase won't work properly in electrum, the same phrase generates different addresses in electrum compared to multibit. The easiest solution is to install breadwallet on your phone and use your multibit seed in it. However you either need an iPhone, or a recent android phone. Breadwallet won't work on older androids. If you choose to install breadwallet make sure you install the real one, there are fakes constantly appearing in app stores that will steal your Bitcoins. A mycelium wallet running on an older android might also be able to import multibit wallet words. The quote below explains what to do, but I'm not sure if it works because I don't know of anyone who's tested it yet. Apparently you have to use the "Rescan Account" option after importing your wallet words.edit: I tested using a myltibit HD seed in mycelium and it didn't work. If you test it and it works please post the results here to help others in the same boat.You could try installing Mycelium if your phone doesn't have the pre-reqs for bread wallet. You can use MultiBit HD wallet words in Mycelium, but according to these github posts you have to use Mycelium's "Rescan Account" option afterwards to get it to show your balance. Those github posts were made in 2014/2015, so if mycelium has been improved since you might be able to skip the "Rescan Account" step. https://github.com/keepkey/multibit-hd/issues/687The addresses generated between Mycelium and MultiBit HD are the same for the Account 1. Unfortunately there seem to be some optimisations in Mycelium that mean that they are not fully interoperable. Both Mycelium and MBHD have 'full rescans' where you (most likely) see everything but this is not practical for daily use. https://github.com/mycelium-com/wallet/issues/142I found my answer. "Rescan Account" option after selecting the account under accounts. Now I have all of account history back. There's another more technical solution at the thread link below. If you try it make sure you install virtual box or vmware and run the offline webpage described in it inside a virtual machine. If you use a virtual machine any malicious code in it can't steal your coins. I don't think there is anything malicious about it but it's best to be safe than sorry. https://bitcointalk.org/index.php?topic=1785575.0
|
|
|
Check your receiving address on blockchain.info. https://blockchain.info/If it shows your address contains the coins from coinbase then try restarting your electrum wallet. If that doesn't work then try the instructions below. Sometimes a server electrum's connected to gets out of sync with the Bitcoin network. Selecting a different one fixes the problem. Click tools, then network. A popup box should open. Uncheck "select server automatically" and keep selecting new servers from the list that appears, then clicking the OK button until your balance shows up.
|
|
|
|