msOS Update
- Added support for AMD Workstation drivers. To install use command: amd-update --workstation --install 21.20
- Added new console command: toggle-agent to enable agent screen on boot.
- Added partial support for DIMGREY_CAVEFISH (W6600) GPUs with workstation cards. ClockTune may not work correctly.
- Improved AMD Radeon VII memory detection.
- Improved driver update scripts for a higher success rate.
- Improved GPU sorting.
- Updated PCI ID database.

minerstat for Windows v6.4.3
Changes since v6.4.2 version:
- Resolved an issue with Trex arg config type.

msOS Miner Update
 nbminer v39.4

Windows Miner Update
 nbminer v39.4

nbminer: Resolved mining issue with Octopus algorithm.

Outage Compensation
Outage Compensation program will now automatically include even workers that you didn't add yet and therefore provide partial compensation for empty slots.

msOS Update
- Improved AMD RX Vega memory detection.
- Support for latest Nvidia v470.74 drivers. Install with command: nvidia-update --install 470.74

msOS Miner Update
 trex v0.22.1

Windows Miner Update
 trex v0.22.1

trex: Added up to 70% unlock on Ethash for 30xx LHR GPUs. Use as: --lhr-tune 1 (lowest) to 8 (highest chance).

msOS Miner Update
 nanominer v3.3.11
 nbminer v39.3

Windows Miner Update
 nanominer v3.3.11
 nbminer v39.3

nanominer: Fixed invalid ETH shares issue on some Nvidia RTX30xx.
nbminer: Resolved higher CPU usage when --share-check 0 was used. Client will automatically decrease -lhr value for LHR GPUs. New low power LHR mode added (Default: -lhr-mode 2 / Previous: -lhr-mode 1).

Payment changes
We have added new payment methods to Billing page and from this day forward you can pay with:
Apple Pay, PayPal, Mastercard, Visa, Maestro, American Express, Discover, Diners Club, JCB, UnionPay, Mada, Cryptocurrencies, and Wire Transfers (ACH/SEPA/BACS).

At the same time we are pleased to announce that we are again accepting customers from the United Kingdom.

msOS Update
- Improved support for Rebtech motherboards.
- Improved motherboard handling for cases when AMD Internal GPU (APU) is not disabled in Bios settings.
- Added support for both JSON and Args config type for Lolminer and Trex.

minerstat for Windows v6.4.2
Changes since v6.4.1 version:
- Added support for both JSON and Args config type for Lolminer and Trex.
- Improved high CPU usage when using miner snapshot function on Celeron processors and/or slow hard drives.

Download: https://minerstat.com/software/windows

Worker's config page
- Added ASIC model selection to show proper hardware denotation on worker's profile.
- Added Earnings deduction percent that can be used to include mining client's fee, pool's fee, or mining manager's fee to the estimated earnings calculations display.
- Added an option to delay mining client start on (re)boot for both msOS and Windows.

msOS Miner Update
 nanominer v3.3.10
 gminer v2.68

Windows Miner Update
 nanominer v3.3.10
 gminer v2.68

nanominer: Fixed Raven invalid shares issue and ETH performance issue for some Nvidia RTX30 Series GPUs.
gminer: Detect lock of LHR GPUs, automatically unlock and continue mining.

msOS Miner Update
 gminer v2.67
 lolminer v1.32a
 wildrig-multi v0.29.0

Windows Miner Update
 gminer v2.67
 lolminer v1.32
 wildrig-multi v0.29.0

gminer: Partial LHR cards unlock without additional power consumption. Use --lhr 1 to force enable unlock for RTX 3060 V1.
Use --lhr_tune1/lhr_tune2 to tune unlock parameters, positive values increase performance, negative values decrease the probability of lock. (v470+ drivers required, Update with nvidia-update command).
lolminer: Added RTX 3000 series semi-unlock for LHR v2 cards giving up to 30% more performance than in the locked state. Recommended drivers for LHR2 and LHRLP: 470.63.01 or 465.31. Multiple other stability improvements and bug fixes.
wildrig-multi: Added support for new AMD drivers. Implemented support for RX6000 Series GPUs.

minerstat for Windows v6.4.1
Changes since v6.4.0 version:
- Improved Windows Boot Protection. If uptime is not available then the feature will be disabled.
- Fixed an issue with an installer with an irreplaceable .sys file.
- Updated GUI engine to make it more responsive.

Reminder: Since the v6.3.0 release, it's possible to update minerstat for Windows from the Workers list. To manually update run C:/minerstat-windows/auto-updater.exe or reinstall.

Download: https://minerstat.com/software/windows

msOS Miner Update
 bminer v16.4.7
 nanominer v3.3.9

Windows Miner Update
 bminer v16.4.7
 nanominer v3.3.9

bminer: New LHR mode to unlock part of the performance of LHR GPUs.
nanominer: Raven performance improvements for Nvidia Pascal, Turing, and Ampere GPUs (about +1.5%). Ergo (Autolykos2) performance improvements for Nvidia Pascal (1% - 3%). Improved connection stability.

Triggers
Added more options to the Consumption trigger.

Workers list
- Added Max memory temperature display to workers list page if value is available.
- Added search to Switch options.

Worker's config page
Added search to Config templates that is available under config editor.

Triggers
Added more options to Memory temperature trigger.

Discord
Due to spam/scam bots joining Discord every day, we have added a verification Bot. To get full access to our Discord server just paste your current Support ID to the verification channel.

ASIC-HUB v2.9.4
- Increased global and command timeouts for the machine requests.
- Changed Antminer config editing method, now making reboot again after config editing to avoid firmware bugs.

msOS Update
- Improved ClockTune for the latest Nvidia drivers to attempt to auto-solve Xorg problems.

minerstat for Windows v6.4.0
Changes since v6.3.4 version:
- Added support for Diagnostics. Now you can test for conflicting software, reserved ports, check Virtual memory and other useful data with a single click.
- Added support for Discovery tool. You can now effortlessly discover new Windows workers that can be found on your local network. The machine can be discovered on fresh installs and if you are not logged in to it yet.
- Added System logs. Reboot, Shutdown, Start/Stop events are logged and available in the activity log. Also on the diagnostics page, you can track the reboot counter too.
- Added Windows Boot Protection. Windows loads other things after user login. With that in mind, we have added a 15 second wait time to start the miner and overclocks and give Windows enough time to initialize.
- Improved process killing. It will no longer close unrelated CMD windows on your desktop.
- Improved ClockTune error handling that will prevent crashes on common user related errors.
- Reduced the amount of data sent over in Idle mode.
- Disabled Hardware Acceleration and limited to a maximum of 10FPS for the Graphics Interface to make minerstat GUI more responsive.
- Other smaller fixes and stability improvements

Reminder: Since v6.3.0 release it's possible to update minerstat for Windows from Workers list. To manually update run C:/minerstat-windows/auto-updater.exe or reinstall.

Download: https://minerstat.com/software/windows

Worker's profile
- Added search to ClockTune and Config templates selection dropdown menu.
- Added toggle to hardware list to show or hide currently applied ClockTune values.

msOS Miner Update
 teamredminer v0.8.5

Windows Miner Update
 teamredminer v0.8.5

teamredminer: Added Windows clocks/voltage/built-in timings control. Fixed some issues with Windows fan control, mostly for Big Navi GPUs. Added mem temp limits (stop/resume) --mem_temp_limit and --mem_temp_resume. Added extranonce subscription for Autolykos2 algorithm.

msOS Miner Update
 nbminer v39.2

Windows Miner Update
 nbminer v39.2

nbminer: Ethash added LHR lock detection and recovery in LHR mode. Improved Autolykos2 stratum protocol. Miner console displaying memory temperatures for AMD/Nvidia GPUs if available under Windows.

Triggers
Added an option to apply ClockTune profile on GPU Temp trigger.

msOS Miner Update
 gminer v2.66
 srbminer-multi v0.8.0

Windows Miner Update
 gminer v2.66
 srbminer-multi v0.8.0

gminer: Improved KawPow (RVN) performance under msOS on Nvidia GPUs. Improved compatibility with Ethash pools.
gminer-amd: Added support for KawPow algorithm for AMD GPUs.
srbminer-multi: Performance increase on Etchash, Ethash, Ubqhash, Verthash, HeavyHash algorithm for RX6800, RX6900 GPUs.

SSD Flasher v0.4
- Increased size of Config partition to 9GB.
- Allowing .zip files to flash. You can drag and drop the downloaded msOS image to the SSD flasher partition and will be flashed to the auto-detected or selected SSD/M2 drive.

Download: https://minerstat.com/software/ssd-flasher

msOS Miner Update
 nbminer v39.1

Windows Miner Update
 nbminer v39.1

nbminer: Ethash improves the hashrate of LHR mode 1-2%. The default value of -lhr changes from 68 to 69. Fixed LHR mode support on windows driver 471.11. Resolved issues with KawPow. Resolved Radeon VII issue on windows driver 21.6.1+.

msOS v1.7.6
- AMD Driver: amdgpu-pro 21.20 (with 20.40 openCL).

No changes since v1.7.5. The new v1.7.6 package includes older AMD driver to provide more compatibility with phoenix-eth and teamredminer and confirmed to work with RX6600. Currently this image is recommended for latest generation of GPUs. For older NAVIs v1.4.10 is recommended.

ASIC-Hub v2.9.3
- Support for Innosilicon older Python based firmwares.

SSD Flasher v0.3
- Updated base OS.
- Dual UEFI/Legacy bootloader for better compatibility.
- Improved M2 flashing.
- Updated all available Intel Ethernet drivers to the latest version (igb/ixgbe/e1000).

Download: https://minerstat.com/software/ssd-flasher

ASIC-Hub v2.9.2
- Support for Whatsminer btminer based firmware in addition to cgminer ones.

msOS Miner Update
 gminer v2.65

Windows Miner Update
 gminer v2.65

gminer: Fixed floating hashrate reporting (appeared in v2.64).

msOS v1.4.10
- Updated all available Intel Ethernet drivers to the latest version (igb/ixgbe/e1000).
- Support for LHR V2 Nvidia GPUs without driver update.
- Nvidia Driver: v470.63.01.

msOS v1.7.5
- Updated Kernel to the latest available v5.4.141.
- Updated all available Intel Ethernet drivers to the latest version (igb/ixgbe/e1000).
- Better support for new motherboards.
- Support for LHR V2 Nvidia GPUs without driver update.
- Support for AMD RX 6600 XT.
- AMD Driver: amdgpu-pro v21.30 (with 20.40 openCL).
- Nvidia Driver: v470.63.01.

Download: <https://minerstat.com/software/mining-os>
Note: You don't have to take any action if your machines are working fine; packages are only recommended for new machines or reflashes. You can download and reflash manually or use command mreflash in your msOS console.

msOS Update
- Improved support for AMD VII Pro.
- New command: igb-update to update/install all available Intel networking drivers (igb/ixgbe/e1000). Recommended for H510 Pro BTC+ motherboards. This update will be included in future images by default.
- Improved SSH Key generation.
- Improved netcheck command with hints.
- Support for latest v5.4.141 kernel within kernel-update (Do not update; that is only for new motherboards).

Triggers
You can now load template config to worker from Triggers. This applies to Time, Efficiency, and Rejected shares events.

msOS Update
Support for AMD 6600 XT. For optimal experience update amdgpu drivers to 21.30 with amd-update --install 21.30 - new msOS images with included kernels and drivers are coming next week.

msOS Update
- AMD Fan Curve will try to detect driver RPM offsets to adjust fan speeds. This may help to avoid issues when Maximum fan speed is set to a lower value than 100%.

msOS Miner Update
 nanominer v3.3.8

Windows Miner Update
 nanominer v3.3.8

nanominer: Improved KAWPOW and RandomX algorithms.