I'm trying to schedule the node.exe program to run at startup, but it keeps crashing because it cannot gain admin properties for openhardwaremonitor in enough time.
Is there a way to schedule this to run at startup of windows 10 and not have it crash?
create start.bat at node folder with where the C:/node/ the path where you put the files and Create a Task to run when startup. https://superuser.com/questions/982419/setting-a-scheduled-task-in-windows-10This is the only method now. I plan to create an Start with Windows at the next version. v9.1 I hope it helps |
|
|
|
Hi,
I want to buy RX 570 with dual bios is there a list or something where I can find which cards have dual bios? I know Sapphire Nitro+ has it and Pulse doesn't have. Do you know other cards with dual bios? Thanks.
Pulse OC has Dual Bios |
|
|
|
Samsung, Micron Mem cards should use either the 1625 or 1750 straps for 4GB and 8GB cards
Hynix should use 1500 Straps
i add this extension. Thank you. can you please explain how to use that auto-strap feature?  Just copy your strap here what you want to tweak after copy back to bios, save and install. |
|
|
|
Auto Strap Editor for AMD GPU's- Just copy your strap and enjoy the results. 
|
|
|
|
Nicehash Balance & Last 5 Payouts.Make sure you changed your NH address at the "Address Editor." ! 
|
|
|
|
|
Might be some API problem from one of calculation servers what i'm using. I make some protection now to fix similar issues in the future.
UPDATE: All fixed and i hope running smooth from now..
|
|
|
|
|
maybe elpida memory card.
need custom strap edited bios. that card has dual bios. 1: 2:
I get 29-30Mh/s with these cards.
|
|
|
|
I am having the same issue as the others with one rig not showing any hash rating. My 3 ETH rigs are showing good but my Zcash rig is a green line at the bottom of the window just like the last 2 guys have posted. Is there anyway for me to fix that so I can see it on the graph?
I just fixed this. I set two protection to this. If your rig offline more than 2 days the rig statistics auto turn off. If you delete your worker, rig statistics auto turn off. From tomorrow you will not see your old workers in rig statistics. |
|
|
|
Do you have a feature to autorestart device if hash drops below certain percent of max hashes?
Yes, this is on my to-do list. .................................................................. I just upgraded the Public Profiles with: - Instant currency switch - logo BG (full BG removed) From now the public profiles have better moderner look. https://minerstat.com/public/coinscrow.html.................................................................. |
|
|
|
I got 3 rigs. sekretaris, rig1, and rig2
However, I have 3 graphs
rig2, sekretaris, and rig
Who the hell is "rig"
I see. rig is an older rig name before you created rig1. Some reason stayed in the stat. I will fix it. It was a smart decision to integrate NiceHash.  Good work! Thanks, Jox. Hi Guys, can I do solo mining with this Software? thanks!
If you have an own pool, and you can connect to the pool via 1 of supported miners. Yes. |
|
|
|
Can you not pre-fill new stuff you add in https://minerstat.com/addresseditor.html? Like your BTC adres in the nicehash line? It's confusing. I fill what I use and leave blanc what I not use. Same when you make a new worker. Can you either blank out the -u adresses or make it pull the correct adress from the https://minerstat.com/addresseditor.html. Whatever you do, don't pre-fill it with your adresses. i'll make step-by-step setup. first when you register will need to change your addresses and disable/enable what you coin want to use. after when you add a new worker the system auto add your addresses to your config editor. i want to the config editor make more clear to the non-expert users. Turn On/off Algo, preconfigure nicehash and similar. So need time.. but remember thats why we on "Beta" status, to make better and better.  I would not give so much feedback if I did not see the potential in your product  I have 2 rigs and both have problems https://minerstat.com/public/jimtom.htmlOnly first GPU temperature shows up. Where do I went wrong? I just made some modification about fetching gpu data at server side.. from now will work |
|
|
|
Hello All. I was able to get 6 x RX-500 series running on windows 10 x64. After two days the stupidest thing I tried worked . 1. use DDU to clean the PC from any previous drivers. 2. Disable 4G decoding so you can log into windows (only for Z170,H170, etc.) 3. Extract older driver for RX 400 series in Drive C: (I use 16.9.2 ) 4. Extract driver for RX 500 series in Drive C: (I use 17.4.3) 5. Copy and replace all content from "C:\AMD\Non-WHQL-Win10-64Bit-Radeon-Software-Crimson-16.9.2-Sep21\Packages\Drivers\Display\WT6A_INF\B307117" to "C:\AMD\WHQL-Win7-64Bit-Radeon-Software-Crimson-ReLive-17.4.3-Apr17\Packages\Drivers\Display\W76A_INF\B313057" (Basically you copy the old driver over the new) 6. Install the VGA cards manually from Device manager in Windows pointing path to the new driver 17.4.3 in this case. 7. Reboot and enable 4G Decoding in Bios 8. Enjoy if it works for you. You can try with different driver versions if they work for you. I`m happy whit the 16.9.2 for the moment but any driver that works whit 6 and more RX 400 series GPUs should work . I know that this solution sound stupid but it`s tested on 8 different rigs whit Asus Prime Z270-P and H270 Motherboards and works like a charm. I`m pretty sure only handful of files need to be replaced but I don have the time to test more elegant solution. Sorry for my English and grammar. Looks like he found a way i dont have any 5xx cards to test but sounds about right I can confirm - it works!!! I tested with BTC r2.0 AMD Remove Tool. -> Reboot I used with 17.1.1 driver, I just put the oldest files to 17.4.4 \Packages\Drivers\Display\W76A_INF\B313057 Manual install driver, bios mod, ati pixel clock patch -> reboot. 6gpu 570 rig works as it should  Anyone know a WattTool alternative to RX 500? Offset and Voltage options won't work. I can get 29.5Mh/s with claymore -mclock 2000 Without it only 25Mh after bios mod  |
|
|
|
Can you not pre-fill new stuff you add in https://minerstat.com/addresseditor.html? Like your BTC adres in the nicehash line? It's confusing. I fill what I use and leave blanc what I not use. Same when you make a new worker. Can you either blank out the -u adresses or make it pull the correct adress from the https://minerstat.com/addresseditor.html. Whatever you do, don't pre-fill it with your adresses. i'll make step-by-step setup. first when you register will need to change your addresses and disable/enable what you coin want to use. after when you add a new worker the system auto add your addresses to your config editor. i want to the config editor make more clear to the non-expert users. Turn On/off Algo, preconfigure nicehash and similar. So need time.. but remember thats why we on "Beta" status, to make better and better. |
|
|
|
Linux OS Alpha:Have someone idea for the OS name? Alpha test soon.. (Check the picture below) Some another info.. v2.9.1 In Progress - Nicehash automatic revenue calculation on the Dashboard. DONE!- Nicehash added to Profit Switch (Optional). UNDER TESTING!- Corrects an issue when offline rig second coin displayed in “Revenue”. DONE!- Corrects an issue when Profit Switch had null values. DONE!- Website prepared for Linux version. DONE!and some new stuff... 1-2 day for this release.. 
|
|
|
|
When Can we expect algo for nvidia ?
Has this question been answered? I seem to be unable to find it. Still a relevant question though. Could you say where other algo's (like Lyra2REv2) are on your roadmap? i thought i answered it. within a 1-2 weeks. i need to add all nvidia supported coins and algos, current price, current exchange, lot of testing, prepare the client to the auto switching. etc.. etc.. need time to this. How is this coming along Coinscrow? Anything we can do to help? i'm working on that. but first i release the v2.9.1 to fix all reported issues and some new improvements. i want two type of node, a stable version what i can recommend to anyone and a dev version, what updated regularly. to you and another can help me with the development. i think if i do this will be more easier |
|
|
|
Seems like there is a bug with fetching prices for ZEC and PASC. I just noticed my miners switched and when I looked at "most profitable" coin the coins mentioned have $0,- values.
Edit: Update: I think this round of API calls returned values again.
i think might be few minutes problem. i will fix at server side |
|
|
|
On my only win 7 machine i got strange problem since 2.9. Since time to time the node is stopping, the miner keep running.
On the win 10 machines, no problems.
have you an error message or just quit? I've yet another request. Could you add profit / revenue on a rig level in the dashboard?
better. revenue chart ? well 3 out of 4 ain't to bad... So installed on 3 rigs up and running good! 4th one keeps giving me error messages.
Was working at one point then screen flipped out froze and when restarted I get the errors.
Getting the
Mport 333 error,
Claymore-zec log doesnt exist
hardware montiro log doesnt exist
Open hardware monitor taskbar Options-Remote web server-run.
So... Reading through here I found the task bar solution but when I go to it on the Hardware monitor the "Run" is already checked?
Compared the folders to folders on other rigs that are running and noticed a few files missing. Copied them over and they delete themselves as soon as you start the miner?
I'm lost and tired. Heading to bed. If anyone can give me any suggestions on these I would be eternally in your debt!
I normally use Claymore dual before starting this program so I know its not a hardware issue?
Thanks
disable firewall and antivirus. set mport.txt to 3333 set -mport 3333 to claymore-dual config online check http://127.0.0.1:3333 is running, after you started your miner... if the page load, the sync must be work. |
|
|
|
2.9 seems to have broken the ability to properly run two instances of the node simultaneously. They will run and the miners will mine but statistics are not showing properly again. https://minerstat.com/public/olaf_d.html CHARLIE and CHARLIE-380 are the same rig but mining ZEC on some cards and ETH/DCR on others. i fixed and improved a lot. . maybe few days v2.9.1 resolve all of issues/bugs what users reported here/email. you can use v2.8.1 that version is stable. |
|
|
|
driver limitation of the rx 500series can't do 6 or more gpu yet
I noticed this today, i can get to work only 5 of 6, 570GPU with the latest AMD driver. I think i will flash to 470 vendor and stay using 17.1.1 relive. There was no error, windows just rebooted after all gpus stopped. (so the windows loaded it, after instant reboot ) |
|
|
|
I check it, thank you. I recommend v2.8.1, I think it the most stable version. But i didn't make changes on algo, just i added few new lines. so.. strange Hi there, nice update. But in the current options i dont think i can mine ETH on pool and DCR on nicehash on ALGO? LEts say pascal is getting more profitable than DCR on nicehash to switch?
I will enable this option very soon. |
|
|
|
|
Show Posts
