Anyone wants some more bonuses or is everyone already satisfied?
|
|
|
I have been trying to get this miner to run with my RX 480s today. I dont seem to get the batch file to work, i feel stupid because i have been doing this alot during the years.
I want to mine eth at suprnova, could someone help me sort out a batch file ?
If i run the original batch file that comes with the miner it is starting up right away but when i change something in it the miner cant connect to the pool.
Do you have the right proxy version set? suprnova is finicky. hmm not sure, i tried to use the information available on their site in the help section. But i am not sure if i get the batch file done right either. This one does not look like they do usally. Pasta your bat file. I am at work right now and the rig is shut down back home. I just found some good stuff at ethermine.org/ regarding the batch file. I will try to remake it when i get back home, if i dont get it to work i paste it here. I have posted the command for Claymore in the header of the pool: Claymore: ethdcrminer64 -epool etc-eu.suprnova.cc:3333 -ewal suprnova.1 -epsw x -esm 3 -allpools 1 -allcoins 1 Is it not working for you ?
|
|
|
i ve tried to test expense too, as my 380's are unstable on etc & eth but miner crash at start when it try on pool exp.suprnova.cc but i don't understand why some miners crash on etc and others working fine all 380 2 gigas gpu's asus ring 5 gpu they working fine, + 1 solo xfx working fine too but my xfx 6 gpu ring just get crazy at start or after few minutes on etc and some more on eth before it get errors and the 5x sapphire can few minutes or couple of hours before get same errors so weird Can you post me the message how it is crashing ? Maybe it is using the wrong Stratum Variant ? If you are using any other Version than genoil 1.1.0 you have to use "-SP 2" in the cmdline like so: ethminer.exe -G -SP 2 -S exp.suprnova.cc:3333 -O myworker.1:x hi, -SP 2 don't work i ve tested that too "C:\cgminer skein\cgminer_skein\ethminer-opencl-0.9.41\ethminer.exe" -G -S exp.suprnova.cc:3333 -O carlo_0000.380xfx:0 Signature du problème : Nom d’événement de problème: APPCRASH Nom de l’application: ethminer.exe Version de l’application: 0.0.0.0 Horodatage de l’application: 574ea6a2 Nom du module par défaut: MSVCR120.dll Version du module par défaut: 12.0.21005.1 Horodateur du module par défaut: 524f83ff Code de l’exception: 40000015 Décalage de l’exception: 0000000000074a46 Version du système: 6.1.7601.2.1.0.256.48 Identificateur de paramètres régionaux: 2060 Information supplémentaire n° 1: c7c7 Information supplémentaire n° 2: c7c7c53ab42ba3bc07ede86d44d3ebf0 Information supplémentaire n° 3: 0417 Information supplémentaire n° 4: 041776d4c0a35fee3c9d56597f80ccb5
Lire notre déclaration de confidentialité en ligne : http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x040c
Si la déclaration de confidentialité en ligne n’est pas disponible, lisez la version hors connexion : C:\Windows\system32\fr-FR\erofflps.txt
You are using an old version, try to use this version : https://github.com/nicehash/cpp-ethereum/releases
|
|
|
Does anyone know where you can hire hashrate for SHF?
Miningrentals is full of ETH and ETC but no SHF.
Just use any Stratum Rig there from Dagger-hashimoto and point it to the pool: https://shift.suprnova.cc/index.php?page=dashboardstratum+tcp://shift.suprnova.cc:4334 for MRR Stratum
|
|
|
Anyone mining LBRY with AMD rx480 and windows 10 x64 ?
I want info for miner AMD and .bat .
Thanks .
easy: setx GPU_MAX_ALLOC_PERCENT=100 setx GPU_USE_SYNC_OBJECTS=1 ./sgminer -k lbry -o stratum+tcp://lbry.suprnova.cc:6256 -u suprnova.1 -p x -I 21 -g 4 -w 64
|
|
|
Despite loosing suprnova, diff didn't drop. Good sign of dedicated miners ;-)
well.. no one really quit mining ob suprnova tbh...
|
|
|
I know that it is not a pool sub - but it is much faster to get an answer here I mine dual ETC+SC with CDM My pool is nanopool. I'm getting about two time less estimations on nanopool (ETC and 25% less of SIA) compared with https://www.whattomine.com calculator My rates are 118MHs - ETC, 2300MHs - SC. Luck is OK1) Nanopool Estimations ETC - 1.826 per day SIA - 4,786.902 per day 2) Calculator ETC - 3.938171 per day SIA - 6,420.437005 per day Is it known issue, smth wrong with their stats or anything else? ETH and SIA calculations are pretty much ok, for ETH I was getting best results on Dwarfpool. For now ETC network is extremely volatile with some pool disconnects, orphans and stales. It will sort out in time for sure. Which ETC pool is best for you? I tried many pools, the rejection is between 15 to 30%. So I gave up.l Try: https://etc.suprnova.ccEfficiency is > 99 %, stratums in multiple locations and if you're still having problems, just come into #suprnova IRC on freenet and we'll find out whats wrong. Yeh.. But how do I mine Sia startum with Claymore as the second coin? It was possible before..! I have the string for claymore posted in bold in the header of the pool, did you try that? all you have there is Suprnova's SiaCoin Pool // Algo: blake2b // Live ! stratum+tcp://sia.suprnova.cc:2786 20% Bonus for every Block ! Use this SGMiner for mining ! ..but it does not work with Claymore anymore.. please provide the full string if you can.. thank you UPDATE: -dpool stratum+tcp://sia.suprnova.cc:2786 -dwal g___o.sia -dpsw x -dcoin sc -dcri 44 -this works in ver 5.1 Beta2 ..atleast I can see the hasrate in CDM, but didnt see any stats at supernova ..in ver. 5.3 does not work Ah you want to merge-mine SIA at Suprnova.. Unfortunately the stratum protocol is not yet integrated into Claymore as far as I know, you can only mine ETC / DCR fully on Suprnova currently.
|
|
|
i ve tried to test expense too, as my 380's are unstable on etc & eth but miner crash at start when it try on pool exp.suprnova.cc but i don't understand why some miners crash on etc and others working fine all 380 2 gigas gpu's asus ring 5 gpu they working fine, + 1 solo xfx working fine too but my xfx 6 gpu ring just get crazy at start or after few minutes on etc and some more on eth before it get errors and the 5x sapphire can few minutes or couple of hours before get same errors so weird Can you post me the message how it is crashing ? Maybe it is using the wrong Stratum Variant ? If you are using any other Version than genoil 1.1.0 you have to use "-SP 2" in the cmdline like so: ethminer.exe -G -SP 2 -S exp.suprnova.cc:3333 -O myworker.1:x @ocminer witch is the best mining motherboard? i wont yr opinion... thanks in advance... still is ashrock h? Z170 is in my Rigs, and H81 pro BTC is still one of the best
|
|
|
Ocminer, why ur pool keep Downing ? When u fix it? I looking a pool who run 100% fine and i can get a good profit with 1gh/s and works with nicehash.
Someone help me pls
Cya
Huh ? Downing ? Nothing downing on my side, what error do you get ?
|
|
|
I know that it is not a pool sub - but it is much faster to get an answer here I mine dual ETC+SC with CDM My pool is nanopool. I'm getting about two time less estimations on nanopool (ETC and 25% less of SIA) compared with https://www.whattomine.com calculator My rates are 118MHs - ETC, 2300MHs - SC. Luck is OK1) Nanopool Estimations ETC - 1.826 per day SIA - 4,786.902 per day 2) Calculator ETC - 3.938171 per day SIA - 6,420.437005 per day Is it known issue, smth wrong with their stats or anything else? ETH and SIA calculations are pretty much ok, for ETH I was getting best results on Dwarfpool. For now ETC network is extremely volatile with some pool disconnects, orphans and stales. It will sort out in time for sure. Which ETC pool is best for you? I tried many pools, the rejection is between 15 to 30%. So I gave up.l Try: https://etc.suprnova.ccEfficiency is > 99 %, stratums in multiple locations and if you're still having problems, just come into #suprnova IRC on freenet and we'll find out whats wrong. Yeh.. But how do I mine Sia startum with Claymore as the second coin? It was possible before..! I have the string for claymore posted in bold in the header of the pool, did you try that?
|
|
|
I know that it is not a pool sub - but it is much faster to get an answer here I mine dual ETC+SC with CDM My pool is nanopool. I'm getting about two time less estimations on nanopool (ETC and 25% less of SIA) compared with https://www.whattomine.com calculator My rates are 118MHs - ETC, 2300MHs - SC. Luck is OK1) Nanopool Estimations ETC - 1.826 per day SIA - 4,786.902 per day 2) Calculator ETC - 3.938171 per day SIA - 6,420.437005 per day Is it known issue, smth wrong with their stats or anything else? ETH and SIA calculations are pretty much ok, for ETH I was getting best results on Dwarfpool. For now ETC network is extremely volatile with some pool disconnects, orphans and stales. It will sort out in time for sure. Which ETC pool is best for you? I tried many pools, the rejection is between 15 to 30%. So I gave up.l Try: https://etc.suprnova.ccEfficiency is > 99 %, stratums in multiple locations and if you're still having problems, just come into #suprnova IRC on freenet and we'll find out whats wrong.
|
|
|
i ve tried to test expense too, as my 380's are unstable on etc & eth but miner crash at start when it try on pool exp.suprnova.cc but i don't understand why some miners crash on etc and others working fine all 380 2 gigas gpu's asus ring 5 gpu they working fine, + 1 solo xfx working fine too but my xfx 6 gpu ring just get crazy at start or after few minutes on etc and some more on eth before it get errors and the 5x sapphire can few minutes or couple of hours before get same errors so weird Can you post me the message how it is crashing ? Maybe it is using the wrong Stratum Variant ? If you are using any other Version than genoil 1.1.0 you have to use "-SP 2" in the cmdline like so: ethminer.exe -G -SP 2 -S exp.suprnova.cc:3333 -O myworker.1:x
|
|
|
10% Bonus ended, thanks for the participation, next bonus very soon, get your rigs ready
|
|
|
So.....
Whats the status now?
1 hacker has 7,6 MILLION ETC..
and another has 4 million..
And btc is bleeding hard....
And polo is on the hitlist for picking up ETC....
GG cryptos?
i am asking out of curiosity... is etc facing the same problem what happened with eth/dao i thought that etc will not have the same problems especially after the hardfork if i m wrong correct me pls ETH is secured from the "effect" of the DAO. That is that the stolen coins are returned. But it still suffered massivly due to panic and lost trust. ETC is suffering the DAO effect, consdiering the stolen coins belongs to the hacker. There will not be a new DAO on any of the chains. ETH has to regain trust. ETC has to survice the hacker dump. Im not sure what the status is with replay attacks.... its all a f***n mess. The Hacker dump... Maybe see it from another side, some clever guy (the one who exploited the Dao bug) has merely unlimited money now for funding... If he's double clever, he rents some skilled people and develop features which make the price even rise more and the coin good
|
|
|
Hi thanks for your reply. I was actually talking about actual vs expected earnings. Probably ETC mining difficulty and new comers reduce the reward significantly which is not reflected in "whattomine"s calculation
Unsure about this, but diff and nethash has doubled in the last 24h which literally halved rewards
|
|
|
|