NewbieTreider
Member
Offline
Activity: 89
Merit: 10
|
|
August 02, 2016, 10:52:32 AM |
|
Does usb 3.0 pci-e risers requires driver instalation?? My mobo is not finding my video cards after i put on usb pci-e risers
Not, at least in linux, and I think not need it in Windows... Try to check your BIOS for the PCIe conf. and set Gen2... Here a good link for risers, ( http://spacience.blogspot.com.es/2016/03/fix-it-bible-pcie-1x-to-16x-risers-for.html) it's not my page but I found it usefull when I was starting with my rig! Regards!
|
|
|
|
tolazy
|
|
August 02, 2016, 12:04:58 PM |
|
i tried to solo mine sia pointed to http://127.0.0.1:9980but i get DCR: http error #22. DCR: Check username and password, and/or pool state. DCR: Failed to connect to pool (127.0.0.1:9980), retry in 10 sec... where is the config file so i can set rpcuser/password i'm useing Sia-UI-win32-x64
|
|
|
|
joaocha
|
|
August 02, 2016, 01:33:05 PM |
|
Does usb 3.0 pci-e risers requires driver instalation?? My mobo is not finding my video cards after i put on usb pci-e risers
Not, at least in linux, and I think not need it in Windows... Try to check your BIOS for the PCIe conf. and set Gen2... Here a good link for risers, ( http://spacience.blogspot.com.es/2016/03/fix-it-bible-pcie-1x-to-16x-risers-for.html) it's not my page but I found it usefull when I was starting with my rig! Regards! Thanks in advance, but i cant find where i change this on my mobo (Ga 970a ds3p), someone can say where i can change this on my bios?
|
|
|
|
ps_jb
|
|
August 02, 2016, 01:47:57 PM |
|
I know that it is not a pool sub - but it is much faster to get an answer here I mine dual ETC+SC with CDM My pool is nanopool. I'm getting about two time less estimations on nanopool (ETC and 25% less of SIA) compared with https://www.whattomine.com calculator My rates are 118MHs - ETC, 2300MHs - SC. Luck is OK1) Nanopool Estimations ETC - 1.826 per day SIA - 4,786.902 per day 2) Calculator ETC - 3.938171 per day SIA - 6,420.437005 per day Is it known issue, smth wrong with their stats or anything else?
|
|
|
|
thevictimofuktyranny
Legendary
Offline
Activity: 1092
Merit: 1004
|
|
August 02, 2016, 02:52:01 PM |
|
I know that it is not a pool sub - but it is much faster to get an answer here I mine dual ETC+SC with CDM My pool is nanopool. I'm getting about two time less estimations on nanopool (ETC and 25% less of SIA) compared with https://www.whattomine.com calculator My rates are 118MHs - ETC, 2300MHs - SC. Luck is OK1) Nanopool Estimations ETC - 1.826 per day SIA - 4,786.902 per day 2) Calculator ETC - 3.938171 per day SIA - 6,420.437005 per day Is it known issue, smth wrong with their stats or anything else? No idea, when dual mining ETHF and SIA, you lose about 9-5% of hashpower dual to inefficiencies at poolside, which can't be avoided. Perhaps, you should consider dual mining ETHF and SIA. Using "Claymore's Dual Ethereum+Decred_Siacoin AMD GPU Miner v5.1 Beta2", gives marginally higher accepted share averages then the last 2 versions. No Stratum support for SIA and you should use https://siamining.com/ - even though it is at 3% fees. And, setting cards to Slow mining mode (1) for dual mining ETHF and SIA tends to give slightly better share averages over 24 hours then Fast (0) or Mix of Fast (0) and Slow (1). But, this is for Windows 7 64bit, averages may be different on Windows 8 or Windows 10 or Linux. You'll, just have test it out for yourself.
|
|
|
|
pwpwpw
|
|
August 02, 2016, 03:27:13 PM Last edit: August 02, 2016, 03:38:23 PM by pwpwpw |
|
Hey guys, do you know what http error 22 means ? Sia disconnects and then reconnects, is there something with the pool? My other miner doesn't stop and they both use same router. I have this in my config -dpool http://sia-eu1.nanopool.org:9980/miner/header?address="myaddress&rig=rig"
|
|
|
|
carloshell
Member
Offline
Activity: 61
Merit: 10
|
|
August 02, 2016, 03:58:16 PM |
|
I know that it is not a pool sub - but it is much faster to get an answer here I mine dual ETC+SC with CDM My pool is nanopool. I'm getting about two time less estimations on nanopool (ETC and 25% less of SIA) compared with https://www.whattomine.com calculator My rates are 118MHs - ETC, 2300MHs - SC. Luck is OK1) Nanopool Estimations ETC - 1.826 per day SIA - 4,786.902 per day 2) Calculator ETC - 3.938171 per day SIA - 6,420.437005 per day Is it known issue, smth wrong with their stats or anything else? The nanopool estimations are wrong, I am getting something closer to the calculator rate at the moment. I have no idea why nanopool estimations are far from what we are mining with them. Take the time to calculate your gains for 24h, you will see it's much higher than what Nanopool is estimating for you.
|
|
|
|
ps_jb
|
|
August 02, 2016, 05:11:43 PM |
|
The nanopool estimations are wrong, I am getting something closer to the calculator rate at the moment. I have no idea why nanopool estimations are far from what we are mining with them.
Take the time to calculate your gains for 24h, you will see it's much higher than what Nanopool is estimating for you.
Thank you and thevictimofuktyranny
|
|
|
|
fredeq
Legendary
Offline
Activity: 1537
Merit: 1005
|
|
August 02, 2016, 05:31:46 PM Last edit: August 02, 2016, 08:14:55 PM by fredeq |
|
I know that it is not a pool sub - but it is much faster to get an answer here I mine dual ETC+SC with CDM My pool is nanopool. I'm getting about two time less estimations on nanopool (ETC and 25% less of SIA) compared with https://www.whattomine.com calculator My rates are 118MHs - ETC, 2300MHs - SC. Luck is OK1) Nanopool Estimations ETC - 1.826 per day SIA - 4,786.902 per day 2) Calculator ETC - 3.938171 per day SIA - 6,420.437005 per day Is it known issue, smth wrong with their stats or anything else? ETH and SIA calculations are pretty much ok, for ETH I was getting best results on Dwarfpool. For now ETC network is extremely volatile with some pool disconnects, orphans and stales. It will sort out in time for sure.
|
|
|
|
elzium
Member
Offline
Activity: 96
Merit: 10
|
|
August 02, 2016, 10:53:24 PM |
|
@ Claymore
How about instead of "new job" show last block number. So if any doubt, i can check if miner is chewing on right job.
|
|
|
|
carloshell
Member
Offline
Activity: 61
Merit: 10
|
|
August 03, 2016, 03:44:59 AM |
|
Hey, It probably already been answered, but this pool: https://siamining.com/stratum is now supporting stratum. I tried some config around with the claymore miner. It is connecting, but I receive a red error message. Anyways the http is working fine. Thanks!
|
|
|
|
citronick
Legendary
Offline
Activity: 1834
Merit: 1080
---- winter*juvia -----
|
|
August 03, 2016, 04:57:47 AM |
|
the sky is falling on the ETH price -- no thanks to her evil twin ETC (depending on how you look at it) if only there is a pool that do ETH and ETC at the same but pays miners for both.... hmmm
|
If I provided you good and useful info or just a smile to your day, consider sending me merit points to further validate this Bitcointalk account ~ useful for future account recovery...
|
|
|
|
Gataway
Newbie
Offline
Activity: 54
Merit: 0
|
|
August 03, 2016, 07:18:13 AM |
|
I know that it is not a pool sub - but it is much faster to get an answer here I mine dual ETC+SC with CDM My pool is nanopool. I'm getting about two time less estimations on nanopool (ETC and 25% less of SIA) compared with https://www.whattomine.com calculator My rates are 118MHs - ETC, 2300MHs - SC. Luck is OK1) Nanopool Estimations ETC - 1.826 per day SIA - 4,786.902 per day 2) Calculator ETC - 3.938171 per day SIA - 6,420.437005 per day Is it known issue, smth wrong with their stats or anything else? ETH and SIA calculations are pretty much ok, for ETH I was getting best results on Dwarfpool. For now ETC network is extremely volatile with some pool disconnects, orphans and stales. It will sort out in time for sure. Which ETC pool is best for you? I tried many pools, the rejection is between 15 to 30%. So I gave up.l
|
|
|
|
dmwardjr
Legendary
Offline
Activity: 1302
Merit: 1318
Technical Analyst/Trader
|
|
August 03, 2016, 07:35:29 AM Last edit: August 03, 2016, 08:11:37 AM by dmwardjr |
|
Which ETC pool is best for you? I tried many pools, the rejection is between 15 to 30%. So I gave up.l
The following pool is an excellent pool originally set up for ETH but we are now mining ETC. I've been on here approximately 24 hours. Payouts are every 4 hours. Pool fee is 1%. http://miningeth.comEDIT #1: I use my Poloniex ETC Deposit address as my wallet address for now and it has worked fine. EDIT #2: I've earned 46.61832836 ETC over the past 24 hours with 1.44 GH. Not bad for my first 24 hours there. I pointed my rigs there at approximately 2:30am CST yesterday. It is currently 2:47am CST (approximately 24 hours). EDIT #3: I'm adding one more rig later today with 6 x RX 480's on an MSI gaming mother board and I have 5 more RX 480's on the way to get up and running by Friday or Saturday. The goal is 102 RX 480's to go along with the 74 x R9 380's I already have. When I add my current 11 x RX 480's, that will put us right at 1% of the ETC network hash rate. We could use more miners if any wish to join. Keith, is an excellent pool operator. He knows his shiznit. Your in good hands with him. Most all of us at the pool have [Or will be] switching from ethos to awesome miner awesomeminer.com [Which uses Claymore when mining ETH or ETC] to enable us to jump around to whatever alt coin we want to mine, which see: http://awesomeminer.com/guide/awesomeprofit.aspx. I plan on having all my rigs running awesomeminer by next weekend.
|
|
|
|
ocminer
Legendary
Offline
Activity: 2688
Merit: 1240
|
|
August 03, 2016, 09:13:56 AM |
|
I know that it is not a pool sub - but it is much faster to get an answer here I mine dual ETC+SC with CDM My pool is nanopool. I'm getting about two time less estimations on nanopool (ETC and 25% less of SIA) compared with https://www.whattomine.com calculator My rates are 118MHs - ETC, 2300MHs - SC. Luck is OK1) Nanopool Estimations ETC - 1.826 per day SIA - 4,786.902 per day 2) Calculator ETC - 3.938171 per day SIA - 6,420.437005 per day Is it known issue, smth wrong with their stats or anything else? ETH and SIA calculations are pretty much ok, for ETH I was getting best results on Dwarfpool. For now ETC network is extremely volatile with some pool disconnects, orphans and stales. It will sort out in time for sure. Which ETC pool is best for you? I tried many pools, the rejection is between 15 to 30%. So I gave up.l Try: https://etc.suprnova.ccEfficiency is > 99 %, stratums in multiple locations and if you're still having problems, just come into #suprnova IRC on freenet and we'll find out whats wrong.
|
suprnova pools - reliable mining pools - #suprnova on freenet https://www.suprnova.cc - FOLLOW us @ Twitter ! twitter.com/SuprnovaPools
|
|
|
gribgo
|
|
August 03, 2016, 09:34:07 AM |
|
I know that it is not a pool sub - but it is much faster to get an answer here I mine dual ETC+SC with CDM My pool is nanopool. I'm getting about two time less estimations on nanopool (ETC and 25% less of SIA) compared with https://www.whattomine.com calculator My rates are 118MHs - ETC, 2300MHs - SC. Luck is OK1) Nanopool Estimations ETC - 1.826 per day SIA - 4,786.902 per day 2) Calculator ETC - 3.938171 per day SIA - 6,420.437005 per day Is it known issue, smth wrong with their stats or anything else? ETH and SIA calculations are pretty much ok, for ETH I was getting best results on Dwarfpool. For now ETC network is extremely volatile with some pool disconnects, orphans and stales. It will sort out in time for sure. Which ETC pool is best for you? I tried many pools, the rejection is between 15 to 30%. So I gave up.l Try: https://etc.suprnova.ccEfficiency is > 99 %, stratums in multiple locations and if you're still having problems, just come into #suprnova IRC on freenet and we'll find out whats wrong. Yeh.. But how do I mine Sia startum with Claymore as the second coin? It was possible before..!
|
|
|
|
PremiumCodeX
|
|
August 03, 2016, 09:51:37 AM Last edit: August 09, 2016, 12:04:44 PM by PremiumCodeX |
|
Is it stable and worth in solo mining in the close future? Can I use it on the system I use daily or am advised to run it from a dedicated server instead? I would like to use it with an EVGA GeForce GTX 1080, but if I cannot run it on my daily system, I would use it with a Radeon R9 Nano in a server provided it supports them.
EDIT: I think, I will wait the solution of the below mentioned error messages before usage :/
EDIT2: Alrighty. Support is lively at this one. Thank you!
|
|
|
|
ocminer
Legendary
Offline
Activity: 2688
Merit: 1240
|
|
August 03, 2016, 10:58:02 AM |
|
I know that it is not a pool sub - but it is much faster to get an answer here I mine dual ETC+SC with CDM My pool is nanopool. I'm getting about two time less estimations on nanopool (ETC and 25% less of SIA) compared with https://www.whattomine.com calculator My rates are 118MHs - ETC, 2300MHs - SC. Luck is OK1) Nanopool Estimations ETC - 1.826 per day SIA - 4,786.902 per day 2) Calculator ETC - 3.938171 per day SIA - 6,420.437005 per day Is it known issue, smth wrong with their stats or anything else? ETH and SIA calculations are pretty much ok, for ETH I was getting best results on Dwarfpool. For now ETC network is extremely volatile with some pool disconnects, orphans and stales. It will sort out in time for sure. Which ETC pool is best for you? I tried many pools, the rejection is between 15 to 30%. So I gave up.l Try: https://etc.suprnova.ccEfficiency is > 99 %, stratums in multiple locations and if you're still having problems, just come into #suprnova IRC on freenet and we'll find out whats wrong. Yeh.. But how do I mine Sia startum with Claymore as the second coin? It was possible before..! I have the string for claymore posted in bold in the header of the pool, did you try that?
|
suprnova pools - reliable mining pools - #suprnova on freenet https://www.suprnova.cc - FOLLOW us @ Twitter ! twitter.com/SuprnovaPools
|
|
|
gribgo
|
|
August 03, 2016, 11:06:49 AM Last edit: August 03, 2016, 01:00:46 PM by gribgo |
|
I know that it is not a pool sub - but it is much faster to get an answer here I mine dual ETC+SC with CDM My pool is nanopool. I'm getting about two time less estimations on nanopool (ETC and 25% less of SIA) compared with https://www.whattomine.com calculator My rates are 118MHs - ETC, 2300MHs - SC. Luck is OK1) Nanopool Estimations ETC - 1.826 per day SIA - 4,786.902 per day 2) Calculator ETC - 3.938171 per day SIA - 6,420.437005 per day Is it known issue, smth wrong with their stats or anything else? ETH and SIA calculations are pretty much ok, for ETH I was getting best results on Dwarfpool. For now ETC network is extremely volatile with some pool disconnects, orphans and stales. It will sort out in time for sure. Which ETC pool is best for you? I tried many pools, the rejection is between 15 to 30%. So I gave up.l Try: https://etc.suprnova.ccEfficiency is > 99 %, stratums in multiple locations and if you're still having problems, just come into #suprnova IRC on freenet and we'll find out whats wrong. Yeh.. But how do I mine Sia startum with Claymore as the second coin? It was possible before..! I have the string for claymore posted in bold in the header of the pool, did you try that? all you have there is Suprnova's SiaCoin Pool // Algo: blake2b // Live ! stratum+tcp://sia.suprnova.cc:2786 20% Bonus for every Block ! Use this SGMiner for mining ! ..but it does not work with Claymore anymore.. please provide the full string if you can.. thank you UPDATE: -dpool stratum+tcp://sia.suprnova.cc:2786 -dwal g___o.sia -dpsw x -dcoin sc -dcri 44 -this works in ver 5.1 Beta2 ..atleast I can see the hasrate in CDM, but didnt see any stats at supernova ..in ver. 5.3 does not work
|
|
|
|
|