yes is a normal ip for a router
now go to s3 address 192.168.1.99
Yet dont have router . I guess what should do i ) Tp link router's have this range really. 192.168.1.1 And i go and will buy tp link |
|
|
|
|
What router is need it should has similar range ?
192.168.1.1
|
|
|
|
did you borrow the router from your friend?
No , dont need , coming soon will buy . Probably i guess . This ip have tp link's . 192.168.1.1 Good is this ip ? Enter s3 ip ? |
|
|
|
Now , undersand .
I dont have router )
Should will buy , just time dont have that go away school go. )
Bad is that router range was 1.1 ? This range i get from where should make router configuration in browser
You just said earlier you had a router. You do not need two routers. Where have router ? It router tenda was friend . I think that undertood. I should will buy such router which will have this range : .1.1 this range is main ip router configuration ip |
|
|
|
|
Now , undersand .
I dont have router )
Should will buy , just time dont have that go away school go. )
Bad is that router range was 1.1 ? This range i get from where should make router configuration in browser
|
|
|
|
|
(( dont undersand your .
I dont know much english word , i cant translate hard is .
Right now i'm enter on website from phone.
Tell me easy .
What ip should will be router ?
|
|
|
|
from what i understood, he put the rj45 into the miner and red led was off and green powered up... don't u have place for the miner on the tenda router? the yellow ports in this picture:  It word is from russian preamoi . Dont know how to is english preamoi ( I before take tenda from brotherman and back give tenda because it op was 0.1 |
|
|
|
|
On pc i have lan cable and preamoi come from outside ))
I probably guess me router range should will be it number .1.1
I have tenda router and it has this range 0.1
|
|
|
|
Example tell me please.
What range is need and why ?
If it's not in the same IP range it cannot reach the miner. Again I would not worry I would go get a router so you can test it. If it does not work I would post model here. Also I have been following since beginning you might want to get this stuff soon, as if you did get damage in shipping waiting long time will make it harder to report and be believed. What same ip range ? I cat understad S3 same il range ? |
|
|
|
|
Example tell me please.
What range is need and why ?
|
|
|
|
(saving space)
yes i have good PSU i give seller 170 GEL .
it psu has total 700W only +12V: 55A .
i that enter s3 on ip after what do i ? should will install DHCP port ? if should change s3 ip ?
Yes if IP of router is in same IP range. You just go to a internet browser and type in the IP. range range range it word long time call back . დიაპაზონი  if router ip is same s3 ip than i should will change s3 ip ? if other is ip than should instal it protocol DHCP ? Router ip needs to be in same range, not same IP. So router most likely should be set up at 192.168.1.1 . There is a good chance your router will come with this as default. Yes DHCP on router being on is normal. So i that install router nothing change dont need ? Router range will be example .1.678 s3 .1.99 Nothing dont is other need ? Without knowing router we can't know if you need to change IP. Some new routers have 192.168.1.1 as main IP and others have a different. There is not a uniform that all routers us. After you get router if you tell us model we can help more. I cant understad what maybe ip should change ? |
|
|
|
(saving space)
yes i have good PSU i give seller 170 GEL .
it psu has total 700W only +12V: 55A .
i that enter s3 on ip after what do i ? should will install DHCP port ? if should change s3 ip ?
Yes if IP of router is in same IP range. You just go to a internet browser and type in the IP. range range range it word long time call back . დიაპაზონი if router ip is same s3 ip than i should will change s3 ip ? if other is ip than should instal it protocol DHCP ? Router ip needs to be in same range, not same IP. So router most likely should be set up at 192.168.1.1 . There is a good chance your router will come with this as default. Yes DHCP on router being on is normal. So i that install router nothing change dont need ? Router range will be example .1.678 s3 .1.99 Nothing dont is other need ? |
|
|
|
(saving space)
yes i have good PSU i give seller 170 GEL .
it psu has total 700W only +12V: 55A .
i that enter s3 on ip after what do i ? should will install DHCP port ? if should change s3 ip ?
Yes if IP of router is in same IP range. You just go to a internet browser and type in the IP. range range range it word long time call back . დიაპაზონი if router ip is same s3 ip than i should will change s3 ip ? if other is ip than should instal it protocol DHCP ? |
|
|
|
yes
ip is now 192.168.1.99
okey thanks man .. good man . please wait. i will buy router . tp link. For S3's it does not have to be a tp link router. Some require a tp link to run software, but a S3 has it's own controller. So you are pretty open on brand's you can buy. Also you can hook PC directly up to miner to see it if you are comfortable with turning it temporary static IP. don't buy this TP link ?  i that enter on ip should will change S3 ip ? Tp link will work as long as it one that has ethernet slots in it and you are not talking about nano. Other brands will work aswell. Maverick gave good info as far it should be at 192.168.1.99 on ip. On router make it have IP address of 192.168.1.X range to find it easily. anyway i should will buy TP link , other router probably don't is my country very low level is my country , very difficult to find PSU , the whole in georgia was only one good PSu , I visited in many places. i that enter on ip after should will change s3 ip ? The IP maverick mentioned should be where it is after reset. Do you have any computer stores? Just make sure it has more watt's then S3 needs and at least 2 separate PCIe cables. (Meaning not just one split into two). yes i have good PSU i give seller 170 GEL . it psu has total 700W only +12V: 55A . i that enter s3 on ip after what do i ? should will install DHCP protocol? if should change s3 ip ? |
|
|
|
yes
ip is now 192.168.1.99
okey thanks man .. good man . please wait. i will buy router . tp link. For S3's it does not have to be a tp link router. Some require a tp link to run software, but a S3 has it's own controller. So you are pretty open on brand's you can buy. Also you can hook PC directly up to miner to see it if you are comfortable with turning it temporary static IP. don't buy this TP link ? i that enter on ip should will change S3 ip ? Tp link will work as long as it one that has ethernet slots in it and you are not talking about nano. Other brands will work aswell. Maverick gave good info as far it should be at 192.168.1.99 on ip. On router make it have IP address of 192.168.1.X range to find it easily. anyway i should will buy TP link , other router probably don't is my country very low level is my country , very difficult to find PSU , the whole in georgia was only one good PSu , I visited in many places. i that enter on ip after should will change s3 ip ? |
|
|
|
yes
ip is now 192.168.1.99
okey thanks man .. good man . please wait. i will buy router . tp link. For S3's it does not have to be a tp link router. Some require a tp link to run software, but a S3 has it's own controller. So you are pretty open on brand's you can buy. Also you can hook PC directly up to miner to see it if you are comfortable with turning it temporary static IP. don't buy this TP link ? i that enter on ip should will change S3 ip ? |
|
|
|
red led on and off means that miner is at default settings!
yes, i think so . because before until was make reset light only green so before was data save old user and now is reset and don;t is old user data |
|
|
|
i know from your video uploaded on youtube
you are welcome!
good luck!
even but Maybe not reset miner ? what guess that reset ? |
|
|
|
|
from where you guess that miner reset ?
|
|
|
|
yes
ip is now 192.168.1.99
okey thanks man .. good man . please wait. i will buy router . tp link. |
|
|
|
|
Show Posts
