|
I have a few anker powered usb hubs for sale..m see mu sig for sales thread. These rp at around 55e I can do them for .5bt they are tried and tested to do 10 erupters
|
|
|
|
|
price reduced to 1.35BTC
5 units left in stock
4 anker USB hubs
|
|
|
|
185btc per device- want to buy both
This guy is a trolll.... see auction from saturday night |
|
|
|
no idea.... if that does nto work then maybe..... try flashing back to old firmware maybe?
Its a configuration/software issue. Seen this a couple of times as I was flashing within the various firmware. You can try flashing it back to the stock firmware. Hard Reboot, reapply settings.
Tried it still stuck, but Im at work now so I have to wait till I get out  hiw long were you running 350? What kind of environment? what temps? What were your hw errors like? |
|
|
|
why are you all sleeping next to your hardware? ever tried earplugs?  ? |
|
|
|
Mine had a 750 watt Gold Enermax, so replacing with a 750 watt Bronze power supply may not be an upgrade. I thought batch 1 had gold 650W PSU? I have one of those corsair bronze laying around.................. would it be better than a gold 650w? |
|
|
|
|
no idea.... if that does nto work then maybe..... try flashing back to old firmware maybe?
|
|
|
|
So I thought I'd make it easy for everyone to try the latest cgminer 3.3.0 and overclock settings all rolled into one, so here is a firmware with the overclock settings settable from the web interface:
 (perhaps my mistake was that I have kept settings) I got this same exact Cgminer API error HELP ME PLEASE! My unit has been offline for 8 hours now kill cgminer process (needs to be done twice) save config again.... try 345 instead of 350... it seems more stable for me goto startup and RESTART cgminer..... repeat this process every 5mins if not working |
|
|
|
|
thats me up and running with avalons..... what difficulty setting do you suggest if i point my USB erupters at the pool also.... 3.3GH/s per hub
|
|
|
|
I have tried it and I am back to FW 20130519 which was the most stable for m with 300 and 325 cgminer runs only a few minutes, the fans went up to 38xx rpm (noisy) and then cgminer restarts thx for your work  PS: I have learned again -> never change a running system  is this a batch one or batch 2? either way it should not be doing that on 282mhz...... |
|
|
|
Is anyone able to compile a firmware where the fans still throttle, or a way to change that manually? I need to sleep next to this thing.
Also a way to set max temp to 48/49? One of the modules sits on 47 which triggers max RPMs, although I can hopefully move this to somewhere a bit cooler.
unlucky...... |
|
|
|
|
I have 3 of these up for sale, each run 10USB erupters perfectly.
0.5BTC per hub + 15e postage within EU, items are sent from within NL
peace
|
|
|
|
|
9h 34m 30s
81931.77
getworks 1238
accepted 20556
rejected 93
HW 1312
setting 345..... apaprently this works better than 350.... can anyone compare
|
|
|
|
|
I think a 750 or 850 will do the job unless you plan on upgrading to 4 modules later
Wattage / 3 * 4 is what u need fir 4 modules.
I would stop running your batch 1 with overclock until u uo grade though
|
|
|
|
|
Mine generally run around 50 this could be to do with the fans struggling to reach max
|
|
|
|
 batch 1 and 2 batch 2 devices running at 350 Mhz.  350mhz x 240chips = 84000ghs. One of your units is loosing 4000ghs from that. They have 650 psu? 350mhz requires a 750 I think |
|
|
|
|
Well the fan with the blue light on 2 of my batch 1 unit struggles a little... it does not like full speed, so this woukd cut out after a while, many hw errors, heat and SICK once or twice.
what temps do your batch 1 normally run on 300?
|
|
|
|
|
Batch 1 do jot have as big a psu as batch 2...... be careful I had issues with my batch 1 units after a while
|
|
|
|
what do your accepted, rejected and HW look like?
whats the formula for working out the real HW?
Well, I don't care. My calculation is 365MH * 240chips = 87600MH/s ...200MH Loose Edit: srry for my calculations hehe 345 x 240 = 82800 - 82130.28 = 669.72MH temp 1 = 25 temp 2 = 41 temp 3 = 44 |
|
|
|
|
Show Posts
