v11.0 is available:
- Improved speed by about 25-30% for all cards. Up to 12.0 CPD on non-overclocked 290X.
hey claymore, thanks for the update it works great but in one of my rigs 6x280x after 1 minute GPU0 stops mining. -m doesn't show his stats and he doesn't get any shares after 1 minute. i get 40cpd with 5x280x i guess. the wierd thing is Afterburner shows gpu usage on GPU0 and all other gpus
|
|
|
v11 is ready, I'm finishing testing, so it will be available for downloading within 24 hours. It still requires Catalyst 13.12, I tried 14.6, but it is a bit slower.
Can we try puttin the DLL of the 13.12 drivers on the folder like the XMR miner?
|
|
|
Guys any help please? i'm trying for a couple of days to sync my bytecoind with no success. says it can't connect to seeds. XMR,QCN,DUCK works just fine...
can anyone help me with this one?
I just started my daemon from scratch and it goes well. Check your connections settings (firewall etc). i turned off firewall its not the case...i tried syncing through my iphone 3g internet and it works..somethings wrong with my router? it works 2 days ago i didn't change antyhing
|
|
|
Guys can anyone please help me? cant sync my daemon..its been 48 hours since it worked.. i uploaded an image from the bcn daemon cause its happening there as well..but i want to sync my xmr daemon. thank you
|
|
|
Guys any help please? i'm trying for a couple of days to sync my bytecoind with no success. says it can't connect to seeds. XMR,QCN,DUCK works just fine... can anyone help me with this one?
|
|
|
gettin about 48-50CPD with 4x280x and 2x290 on same rig, gpu usage is jumping and cpu usage is 70%+ with pentium haswell.. certainly not the most i can get from this rig. you guys said minimum cpu usage and i don't see it.
|
|
|
I sent money to poloniex yesterday with new wallet change from old wallet but it more than 12Hour no transaction in block Dev please check Now only me but most people have this problem
Thank you
same here, no any answer... have you tried to resync your wallet? yes, if resync the coin is back, because the transaction never been written to the block chain, I don't mean the money is missing, the problem is I can not send out my coins. i have same issue. Had it with qcn as well, they fixed it, i thought bcn already had the fix. Its possible they don't. I changed the data to a new system, It's okay now. but I don't know why. I download full from website bytecoin but it still same problem guys i can't even sync my daemon. it says it can't connect to seeds. any other facing this problem? its for 48 hours +
|
|
|
Guys i can't sync the Daemon, it says it can't connect to seeds and peers. any help?
|
|
|
Question here.
The pool calculator says that with my 6800h/s power i should make 2.5M DUCK a day. i mined couple of blocks with PPLNS and saw that i get about 10,000DUCK reward a block. about 2-3%. if i make 10k duck a block and the calculator says i'm gonna make 2.5M it means that the pool has to find 250 blocks a day? or 1 every 6 minutes? i'm quite sure its not gonna happen all day. its about luck or the reward of the PPLNS can change? maybe the PPS is better?
please explain thank you.
|
|
|
Hey guys, can you tell me from your expirience which GUI Wallet is safe and easy?
thank you verymuch
None. They are all experimental, although it may not be apparent. We are working on it, but have no ETA. If you want security for your money stick with the CLI. It is not that hard after the initial learning phase. I too was intimidated at the beginning, in April. I agree just learn how to use the command line simplewallet. It is especially easy to install on Linux. A little work with OSX. Haven't used it on Windows. run bitmonerod and simplewallet, then just remember to "refresh" and "save" and "exit" i know the basic commands. but i can't copy and paste addresses to the client, and writing the whole address and payment id is a bummer, i know that if i don't close the client i can reuse a command with the address with the up arrow but still i restart here and there. is there a way to paste the address? You can copy and paste, just like in any command prompt. Right click on top bar, Edit, Paste. This has been available for a VERY long time. OMG, in cmd u can right click paste fuck me. thank you
|
|
|
Hey guys, can you tell me from your expirience which GUI Wallet is safe and easy?
thank you verymuch
None. They are all experimental, although it may not be apparent. We are working on it, but have no ETA. If you want security for your money stick with the CLI. It is not that hard after the initial learning phase. I too was intimidated at the beginning, in April. I agree just learn how to use the command line simplewallet. It is especially easy to install on Linux. A little work with OSX. Haven't used it on Windows. run bitmonerod and simplewallet, then just remember to "refresh" and "save" and "exit" i know the basic commands. but i can't copy and paste addresses to the client, and writing the whole address and payment id is a bummer, i know that if i don't close the client i can reuse a command with the address with the up arrow but still i restart here and there. is there a way to paste the address?
|
|
|
Hey guys, can you tell me from your expirience which GUI Wallet is safe and easy?
thank you verymuch
|
|
|
lets make nvidia fan boys sad 3x 290 clocks please ?
|
|
|
gilad215: That looks like a 1.5 XMR transaction. Those 0.1's are INPUTS not outputs. You probably mined those, right? And those are the pool paying you at the 0.1 XMR minimum payout threshold. I could be wrong, as I am no expert, but I CAN read. It doesn't matter how much, thats a transaction out of the wallet that i didn't make.
|
|
|
Can i mine on your pool with Claymore's?
whats the cpd for 280x on your miner?
|
|
|
Claymore,
can you please check your miner on 6GPU rigs? i tried on both of my rigs with diffrent hardware your miner with 5 and then with 6 280xs. same drivers.
on both rigs
5x280x=2200h/s 6x280x=1900h/s.
is this the cpu? on both rigs its pentium haswell can you make any fix or improvment?
thank you.
|
|
|
ty managed to make it working for minergate QCN. but major decrease in performance for my 290. my 280xs work fine but 290 went from 3.1 650h/s to 3.2 to 250h/s! anyone expiriencing this?
|
|
|
Strangely, but I can not mine on minergate with new version gpu miner 21:27:57:162 121c Stratum - connecting to 'fcn-qcn.pool.minergate.com' <207.244.77.149> port 5560 21:27:57:232 1220 Stratum - connecting to 'fcn-qcn.pool.minergate.com' <95.211.217.65> port 5560 21:27:57:302 1220 Stratum - Connected 21:27:57:342 121c Stratum - Connected 21:28:00:312 1220 checkread timeout 21:28:00:352 121c checkread timeout 21:28:03:322 1220 checkread timeout 21:28:03:362 121c checkread timeout 21:28:06:332 1220 checkread timeout 21:28:06:372 121c checkread timeout 21:28:09:342 1220 checkread timeout 21:28:09:382 121c checkread timeout 21:28:12:352 1220 checkread timeout 21:28:12:392 121c checkread timeout 21:28:15:362 1220 checkread timeout 21:28:15:402 121c checkread timeout 21:28:18:372 1220 checkread timeout 21:28:18:412 121c checkread timeout 21:28:21:382 1220 checkread timeout 21:28:21:422 121c checkread timeout 21:28:24:392 1220 checkread timeout 21:28:24:432 121c checkread timeout 21:28:27:402 1220 checkread timeout 21:28:27:402 1220 Job timeout, disconnect, retry in 5sec... 21:28:27:442 121c checkread timeout 21:28:27:442 121c Job timeout, disconnect, retry in 5sec... same here for QCN
|
|
|
|