Claymore's CryptoNote AMD GPU Miner v11.3

[gilad215]

Claymore,

can you please check your miner on 6GPU rigs? i tried on both of my rigs with diffrent hardware your miner with 5 and then with 6 280xs. same drivers.

on both rigs

5x280x=2200h/s
6x280x=1900h/s.

is this the cpu? on both rigs its pentium haswell
can you make any fix or improvment?

thank you.

[1714831271]

1714831271

[1714831271]

1714831271

[1714831271]

1714831271

[1714831271]

1714831271

[1714831271]

1714831271

[grendel25]

I'm just wondering... for you folks getting low hashes for 280X, what is reported in GPU-Z for your engine and memclock?

[Xccel]

3 r9 290 in water 2100H 1000/1300 power 700watt 

http://img4.hostingpics.net/pics/317808r9290water.png

[CryptoMer]

I'm just wondering... for you folks getting low hashes for 280X, what is reported in GPU-Z for your engine and memclock?

300 Core - Occasional spikes to 500.
150 Memory - Occasional spikes to 1500.

All in all, really quite under-utilized.

This happens with multiple rigs, on Windows 7, 8, and 8.1. Single card & multi-card systems. I'm always getting ~340-370 per 280x.

Contents of .bat file:

Code:

setx GPU_MAX_ALLOC_PERCENT 85
:BEGIN
start "CryptoNote" /low /wait "c:\Miners\Claymore CryptoNote GPU Miner v3.1 Beta - POOL\NsGpuCNMiner.exe" -o POOL -p x -u ADDRESS -wd 1 -ee 1 -dbg -1
timeout /t 10
GOTO BEGIN
exit

I've also tried various settings of GPU_MAX_ALLOC_PERCENT, with a reboot in between each value change.

[SpeedDemon13]

So, will the FCN MM ports on minergate work with 3.2 fine? Or is even MM working with this new miner version?

[grendel25]

I'm just wondering... for you folks getting low hashes for 280X, what is reported in GPU-Z for your engine and memclock?

300 Core - Occasional spikes to 500.
150 Memory - Occasional spikes to 1500.

All in all, really quite under-utilized.

This happens with multiple rigs, on Windows 7, 8, and 8.1. Single card & multi-card systems. I'm always getting ~340-370 per 280x.

Contents of .bat file:

Code:

setx GPU_MAX_ALLOC_PERCENT 85
:BEGIN
start "CryptoNote" /low /wait "c:\Miners\Claymore CryptoNote GPU Miner v3.1 Beta - POOL\NsGpuCNMiner.exe" -o POOL -p x -u ADDRESS -wd 1 -ee 1 -dbg -1
timeout /t 10
GOTO BEGIN
exit

I've also tried various settings of GPU_MAX_ALLOC_PERCENT, with a reboot in between each value change.

500/1500 core/mem while you are mining?  That's awful.  Core should be 950-1200 constantly depending on what video card you have a good average is typically 1000-1050 core clock.  You should also use the "-di" command.  usage for me is -di 23  in order to use the second and third card.  starts from 0 and counts up so if you want to use your first two cards it would be -di 01   since you have multiple cards.. I don't know if that means that some aren't 280x.

edit: i've never seen a difference in changing the MAX_ALLOC... i just leave it at 100... idk why... for good luck I guess

[hoangnd]

Hello everyone
my rig with 3x 7950 and 1x 290. With version 2.2 i got 1450 Hash but with version 3.1 the rig only 830 hash. GPU on vesion 3.1 use only 30-40 %. How to fix it?

Hi Claymore, do you have any comment on this case?

[spiffcow]

On multiple computers the exe for this has apparently been deleted..  WTF?  Does it self delete?  It seems odd that I'd have some malware that would do this on multiple machines

[B.T.Coin]

I'm just wondering... for you folks getting low hashes for 280X, what is reported in GPU-Z for your engine and memclock?

My 280X Vapor-X cards are running at 1020 core / 1500 mem and getting 360 hashes/s

[phzi]

On multiple computers the exe for this has apparently been deleted..  WTF?  Does it self delete?  It seems odd that I'd have some malware that would do this on multiple machines

Getting cleaned by anti-virus maybe?  Mining software is often flagged by AV as possibly malicious.

[pepi]

On multiple computers the exe for this has apparently been deleted..  WTF?  Does it self delete?  It seems odd that I'd have some malware that would do this on multiple machines

If you have Kaspersky, or Malwarebytes, up to execute bat file Kaspersky will delete miner.exe file.
That is something Claymore must find solution because it is to boring to pause Kaspersky any time you need to exe Claymore miner

[aistto]

what is mine.cryptoescrow.eu:3333 ? can't find pool frontend

[SpeedDemon13]

So, will the FCN MM ports on minergate work with 3.2 fine? Or is even MM working with this new miner version?

Solve my issue with making sure the -u was needed to put the email account for minergate in the bat file. Thanks for the no help crypto world....

On to a new issue: My 7970 isn't doing 450 h/s, but 370 h/s. I did gpu allocate at 100%. What settings are optimal to run is close to 450 h/s?

[pepi]

So, will the FCN MM ports on minergate work with 3.2 fine? Or is even MM working with this new miner version?

Solve my issue with making sure the -u was needed to put the email account for minergate in the bat file. Thanks for the no help crypto world....

On to a new issue: My 7970 isn't doing 450 h/s, but 370 h/s. I did gpu allocate at 100%. What settings are optimal to run is close to 450 h/s?

But be carefully what you are mining: currently state is
ducknote and quazar coin can be withdrawal to wallet , but they dont come from wallet to Bittrex
you cannot withdrawal monero
only fantom coin goes to market without any problem

Try set to 92-95

[SpeedDemon13]

So, will the FCN MM ports on minergate work with 3.2 fine? Or is even MM working with this new miner version?

Solve my issue with making sure the -u was needed to put the email account for minergate in the bat file. Thanks for the no help crypto world....

On to a new issue: My 7970 isn't doing 450 h/s, but 370 h/s. I did gpu allocate at 100%. What settings are optimal to run is close to 450 h/s?

But be carefully what you are mining: currently state is
ducknote and quazar coin can be withdrawal to wallet , but they dont come from wallet to Bittrex
you cannot withdrawal monero
only fantom coin goes to market without any problem

Try set to 92-95

Ok, I'll try those range of settings.

I know about withdrawing to the wallet, then withdraw from wallet to exchanges.

Thanks for the help, appreciate it.

[AceCobra1]

Are there any performance gains between version 3.1 and 3.2 ?

[renegadepcsolutions]

- Sources: my miners are closed sources, I don't open sources.

The cryptocurrency community was founded and is based around open-source software. That is a principle I firmly believe in.

I also do not believe you should do something for nothing.

HOWEVER, looking at the dev fees, and the amount of traffic on each cryptonight algo... I would assume that the large population of those mining are now using your miner... which means... you are making a killing.

I can't blame you for doing this... however, I do not see the point other than pure greed as to why you would continue to charge a 5% dev fee, when it is widely known that there are quite a few devs working on the OPEN-SOURCE gpu miners (cbuchner1 has one, albeit his own private stash... cuda only kids). There are many working on the AMD open source miner.


All I'm saying is... you catch more flies with honey, than you do with vinegar.

I don't expect you to do something for free, I wouldn't... but at the same time... don't be greedy. If you're going to charge a dev-fee... you might as well give us the version you're using that is all tweaked out and kicks out a shit-ton of hashes. Everyone knows devs keep the best for themselves, but it makes more sense for a dev who charges a fee with his software to give everyone the best, because that means he's getting more of a return when the dev-fee mining kicks in.

[renegadepcsolutions]

Are there any performance gains between version 3.1 and 3.2 ?

No.

[restless]

- Sources: my miners are closed sources, I don't open sources.

The cryptocurrency community was founded and is based around open-source software. That is a principle I firmly believe in.

I also do not believe you should do something for nothing.

HOWEVER, looking at the dev fees, and the amount of traffic on each cryptonight algo... I would assume that the large population of those mining are now using your miner... which means... you are making a killing.

I can't blame you for doing this... however, I do not see the point other than pure greed as to why you would continue to charge a 5% dev fee, when it is widely known that there are quite a few devs working on the OPEN-SOURCE gpu miners (cbuchner1 has one, albeit his own private stash... cuda only kids). There are many working on the AMD open source miner.


All I'm saying is... you catch more flies with honey, than you do with vinegar.

I don't expect you to do something for free, I wouldn't... but at the same time... don't be greedy. If you're going to charge a dev-fee... you might as well give us the version you're using that is all tweaked out and kicks out a shit-ton of hashes. Everyone knows devs keep the best for themselves, but it makes more sense for a dev who charges a fee with his software to give everyone the best, because that means he's getting more of a return when the dev-fee mining kicks in.

ATM this is the Only gpu-miner.
Yes, auhtor of cudaminer has one... but he is not sharing atm. So its your choice...

[incognitoworker]

So, will the FCN MM ports on minergate work with 3.2 fine? Or is even MM working with this new miner version?

Solve my issue with making sure the -u was needed to put the email account for minergate in the bat file. Thanks for the no help crypto world....

On to a new issue: My 7970 isn't doing 450 h/s, but 370 h/s. I did gpu allocate at 100%. What settings are optimal to run is close to 450 h/s?

sure mm ports work, but you cant withdraw your coins...
i did a test, and first withdraw was in wallet in seconds, now they wont let me withdraw anymore.
plz be aware when mining at minergate...