i have paid for a speed of 0.02060000 BTC/GH/day i paid 0.02625873 btc i had a speed of 1 GH for more then a day on eth pool. my payout in ethereum was 0.08653034 eth. what is wrong? i hope i there is a after payment. this can't be right i think.
The pool is working fine. Why are you buying hash though; what's the purpose? You are just exchanging Bitcoins to Ethereum. Mining is all estimated, if you just go to an exchange an buy it then you won't lose your bitcoins. BTW, this is your shares; it will trickle in: https://ethereum.miningpoolhub.com/index.php?page=dashboard
|
|
|
Nice, Thanks a lot for confirmation. I'm sorry but I'm new to MPM and noticed some times it does not switch to top coin when there is low difference, if its intentional its amazing feature. Want to know how much is the ratio to drop running miner and switch to higher benefit coin? Also some times I seen it just stop the running miner and start it again... why is that ?
The switching is based on how much a coin's profit fluctuates and how long it's been since you last switched. All coins are set initially at 100% fluctuation until more information is gathered over the week. So the coin profit fluctuations and time since last switching are the basis of the switching threshold. It can switch within five minutes or stay mining on one algorithm for hours; depends on the live profits.
|
|
|
How come benefit by Multi Pool Miner shows so different from what to mine ? Card GTX 1070 DGB-Groestl multi pool miner on MPH : 0.00117 btc per day *3700 $ = 4.329 $ DGB-Groestl what to mine : 1.59 $ /day
MultiPoolMiner does not use whattomine. It uses your actual hashrate of your system and how much the pool is estimating that they will pay you for that hash. The pool's estimation is based on the coin network difficulty and the exchange rate at the exchange that the pool is using. Thanks a lot for taking the time to answer me. I know MPM doesnt use whattomine, and know how it calculates, I was wondering how come the difference on some coins is so much? And is it really mining 4$/day at that period of time when it says so? Yes, it is correct. Remember that power is about $1-$2, the stats that I'm using are live and the hashrate is real.
|
|
|
How come benefit by Multi Pool Miner shows so different from what to mine ? Card GTX 1070 DGB-Groestl multi pool miner on MPH : 0.00117 btc per day *3700 $ = 4.329 $ DGB-Groestl what to mine : 1.59 $ /day
MultiPoolMiner does not use whattomine. It uses your actual hashrate of your system and how much the pool is estimating that they will pay you for that hash. The pool's estimation is based on the coin network difficulty and the exchange rate at the exchange that the pool is using.
|
|
|
Concerning MultiPoolMiner -
Excavator does not work right for some reason. If I want to remove it do I just go to the miners folder and delete excavator0 - excavator5 ? If not how do I remove a miner?
Thank you
Yes, delete away ![Wink](https://bitcointalk.org/Smileys/default/wink.gif)
|
|
|
@ aaronsace
Testing out your miner. Pretty darn nice!
2 questions.
I noticed it switched to your account and did some mining. Is this required?
Second I notice the -DCRI numbers for Claymore are way higher then I use when dual mining. Can I adjust them?
You can set how many minutes per day you wish to donate (check the 'start.bat' example). You can add/edit any files in the 'miners' folder.
|
|
|
i think multipoolminer use to much memory and probably have memory leak
after a couple of day computer is out of memory and powershell is using it all
You can't get memory leaks in managed environments like '.net' (i.e. C# and PowerShell). I've never noticed any problem with it using too much memory but I have 16GB. How much is it actually using? Well I've had it up to around 24GB of usage, so I'd say you're wrong on that, unless it's supposed to climb that high, heh. I don't recall anyone reporting this before. Please can you raise an issue on GitHub.
|
|
|
i think multipoolminer use to much memory and probably have memory leak
after a couple of day computer is out of memory and powershell is using it all
You can't get memory leaks in managed environments like '.net' (i.e. C# and PowerShell). I've never noticed any problem with it using too much memory but I have 16GB. How much is it actually using?
|
|
|
can you add bcc to autoexchange?
I have had three different coins stuck in autoexchange for over two weeks. Nobody at MPH replies to my emails for help. Why would you want to attempt autoexchange and have stuck coins? The auto exchange to Bitcoin is working for all the coins. Bittrex just needs enabling for BCC. it is enabled already, and 0,0003 is way too high TX fee for a coin with empty blocks... Are you sure? There is an 'x' on every exchange: https://miningpoolhub.com/?page=account&action=autoexchangeI've moved it to Bittrex now anyway (well moving, slowest transaction ever).
|
|
|
can you add bcc to autoexchange?
I have had three different coins stuck in autoexchange for over two weeks. Nobody at MPH replies to my emails for help. Why would you want to attempt autoexchange and have stuck coins? The auto exchange to Bitcoin is working for all the coins. Bittrex just needs enabling for BCC.
|
|
|
The all clear for bitcoin has been signalled, Open The Gates!
@miningpoolhub When are we going to be credited BCC? I do hope you will not delay this one! ![Undecided](https://bitcointalk.org/Smileys/default/undecided.gif) Yeah, need to cash out while it's still worth something.
|
|
|
What is the port for scrypt coin-switching? Not algo switching. These are Bitmain L3+'s and only mine scrypt. I have my hub workers and tried 12576 and 17576 to get the miners going on GAME, but only got 20576 to work. Both the others showed as dead.
The ports are on the homepage: Scrypt is 17001
|
|
|
And what advantage has your miner? If people have better configuration files for MultiPoolMiner, it would be best forking it on GitHub (press the fork button at the top right of the screen) then doing a pull request with an explanation rather than creating whole new repositories with the same code. The good thing about GitHub is that, if you fork it properly, credits for each line are stored and all contributors that have ever helped are listed.
|
|
|
about multipoolminer is it possible to add something like if miner hasrate is 0 mh for at lease 10 minutes it restart the miner ? because i notice this, miner not working and nothing happen it s 0 mh for at lease 20 minutes, wonder how long it will stay like this ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fimg15.hostingpics.net%2Fthumbs%2Fmini_298024multipoolminer.jpg&t=663&c=uXHGvJkPLi5oEg) It's on my todo list. Also, I've updated that miner; use the new version. https://github.com/KlausT/ccminer/releases/download/8.11/ccminer-811-x64.zip
|
|
|
Very cool scripting sir, in an easy and simple package. I am looking forward to the version 2 for MPH. Any chance it will be out in the next few days?
No i will not be releasing NemosMiner-v2.0-MPH any time soon.. "aaronsace/MultiPoolMiner" is Developing "MultiPoolMiner" for Mining Pool Hub.. im simply focusing on the Nvidia side, and getting the Zpool Variant fully functional Regards Nemo Please can you mention MultiPoolMiner on your main thread post (as you have done on the readme) because people are getting confused as to what this is. Unless people go to GitHub, they don't see the readme. Thank you Aaron
|
|
|
Is there any way to use auto switch feature with 2gb cards on ethash? Like restrict switching to ETH and ETC, and choose only from EXP and MUSIC?
It will be in the next MultiPoolMiner release that will hopefully be up tomorrow.
|
|
|
|