[ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin.

[papampi]

How come benefit by Multi Pool Miner shows so different from what to mine ?
Card GTX 1070
DGB-Groestl multi pool miner on MPH : 0.00117 btc per day *3700 $ = 4.329 $
DGB-Groestl what to mine : 1.59 $ /day

MultiPoolMiner does not use whattomine. It uses your actual hashrate of your system and how much the pool is estimating that they will pay you for that hash. The pool's estimation is based on the coin network difficulty and the exchange rate at the exchange that the pool is using.

Thanks a lot for taking the time to answer me.
I know MPM doesnt use whattomine, and know how it calculates,
I was wondering how come the difference on some coins is so much?
And is it really mining 4$/day at that period of time when it says so?

[aaronsace]

How come benefit by Multi Pool Miner shows so different from what to mine ?
Card GTX 1070
DGB-Groestl multi pool miner on MPH : 0.00117 btc per day *3700 $ = 4.329 $
DGB-Groestl what to mine : 1.59 $ /day

MultiPoolMiner does not use whattomine. It uses your actual hashrate of your system and how much the pool is estimating that they will pay you for that hash. The pool's estimation is based on the coin network difficulty and the exchange rate at the exchange that the pool is using.

Thanks a lot for taking the time to answer me.
I know MPM doesnt use whattomine, and know how it calculates,
I was wondering how come the difference on some coins is so much?
And is it really mining 4$/day at that period of time when it says so?

Yes, it is correct. Remember that power is about $1-$2, the stats that I'm using are live and the hashrate is real.

[papampi]

Nice, Thanks a lot for confirmation.
I'm sorry but I'm new to MPM and noticed some times it does not switch to top coin when there is low difference, if its intentional its amazing feature.
Want to know how much is the ratio to drop running miner and switch to higher benefit coin?
Also some times I seen it just stop the running miner and start it again... why is that ?

Code:

   Status: Running

    Speed Active                      Launched Command
    ----- ------                      -------- -------
0.00 PH/s 00 Days 00 Hours 00 Minutes Once     Bin\NVIDIA-TPruvot\ccminer-x64.exe -a myr-gr -o stratum+tcp://europe.hub.miningpoolhub.com:20499 -u xxpapampixx.rig1 -p x -R 5


   Status: Idle

      Speed Active                      Launched Command
      ----- ------                      -------- -------
340.78 MH/s 00 Days 00 Hours 05 Minutes Once     Bin\NVIDIA-TPruvot\ccminer-x64.exe -a myr-gr -o stratum+tcp://hub.miningpoolhub.com:17005 -u xxpapampixx.rig1 -p x -R 5
  0.00 PH/s 00 Days 00 Hours 15 Minutes 2 Times  Bin\Ethash-Claymore\EthDcrMiner64.exe -epool europe.ethash-hub.miningpoolhub.com:20535 -ewal xxpapampixx.rig1 -epsw x -esm 3 -allpools 1 -allcoins 1 -dpool europe.hub.miningpoolhub.com:20550 -dwal xxpapampixx.rig1 -dpsw x -dcoin sc -dcri 40
  0.00 PH/s 00 Days 00 Hours 05 Minutes Once     Bin\Ethash-Claymore\EthDcrMiner64.exe -epool europe.ethash-hub.miningpoolhub.com:17020 -ewal xxpapampixx.rig1 -epsw x -esm 3 -allpools 1 -allcoins 1 -dpool europe.hub.miningpoolhub.com:20550 -dwal xxpapampixx.rig1 -dpsw x -dcoin sc -dcri 40

As you can see, it stopped Claymore and start it again, then stopped TPruvot and start it again


Happens to my other rig as well

Code:

   Status: Running

    Speed Active                      Launched Command
    ----- ------                      -------- -------
0.00 PH/s 00 Days 00 Hours 00 Minutes Once     Bin\NVIDIA-TPruvot\ccminer-x64.exe -a myr-gr -o stratum+tcp://europe.hub.miningpoolhub.com:20499 -u xxpapampixx.rig2 -p x -R 5


   Status: Idle

      Speed Active                      Launched Command
      ----- ------                      -------- -------
397.36 MH/s 00 Days 00 Hours 15 Minutes 2 Times  Bin\NVIDIA-TPruvot\ccminer-x64.exe -a myr-gr -o stratum+tcp://hub.miningpoolhub.com:17005 -u xxpapampixx.rig2 -p x -R 5
  0.00 PH/s 00 Days 00 Hours 10 Minutes 2 Times  Bin\Ethash-Claymore\EthDcrMiner64.exe -epool europe.ethash-hub.miningpoolhub.com:17020 -ewal xxpapampixx.rig2 -epsw x -esm 3 -allpools 1 -allcoins 1 -dpool europe.hub.miningpoolhub.com:20550 -dwal xxpapampixx.rig2 -dpsw x -dcoin sc -dcri 40
  0.00 PH/s 00 Days 00 Hours 41 Minutes Once     Bin\NVIDIA-skunkkrnlx\ccminer-x64-80.exe -a groestl -o stratum+tcp://hub.miningpoolhub.com:17004 -u xxpapampixx.rig2 -p x -R 5
  0.00 PH/s 00 Days 00 Hours 30 Minutes 2 Times  Bin\Equihash-EWBF\miner.exe --api --server europe.equihash-hub.miningpoolhub.com --user xxpapampixx.rig2 --pass x --port 20575 --eexit 1 --solver 0
  0.00 PH/s 00 Days 00 Hours 05 Minutes Once     Bin\Equihash-EWBF\miner.exe --api --server europe.equihash-hub.miningpoolhub.com --user xxpapampixx.rig2 --pass x --port 17023 --eexit 1 --solver 0

[aaronsace]

Nice, Thanks a lot for confirmation.
I'm sorry but I'm new to MPM and noticed some times it does not switch to top coin when there is low difference, if its intentional its amazing feature.
Want to know how much is the ratio to drop running miner and switch to higher benefit coin?
Also some times I seen it just stop the running miner and start it again... why is that ?

The switching is based on how much a coin's profit fluctuates and how long it's been since you last switched. All coins are set initially at 100% fluctuation until more information is gathered over the week. So the coin profit fluctuations and time since last switching are the basis of the switching threshold.

It can switch within five minutes or stay mining on one algorithm for hours; depends on the live profits.

[nitrobg]

And is it really mining 4$/day at that period of time when it says so?

It is currently mining at $4/day. It might/will change within minutes or hours, so whatever the profit is - it is just temporary.

I found that there were some DB overload lately and new stratum connections were having problem for few minutes. (I believe it was less than an hour)
Some inefficient logic caused DB server overload problem. I believe it's completely fixed and will not happen again.

I'm afraid that the issue is still present. On neoscrypt the ccminer often times out when connecting for the first time. Can you debug the issue on your side? I can give you a remote access to my rig for tests if you are interested.

[strosz]

Damn. Someone just started mining DGB Skein with a 2725-3000 GH/s mining farm on MPH. Looks like it tripled the pools total hashrate and difficulty spiked by a huge bunch. Not very fair for the small time miners

Rank     User Name     KH/s                   DGB/Day
1          anonymous     2,725,610,851    441,345.741

[goldline]

i have paid  for a speed of 0.02060000 BTC/GH/day  i paid 0.02625873 btc  i had a speed of 1 GH for more then a day on eth pool.
my payout in ethereum was 0.08653034 eth.
what is wrong?
i hope i there is a after payment.
this can't be right i think.

[aaronsace]

i have paid  for a speed of 0.02060000 BTC/GH/day  i paid 0.02625873 btc  i had a speed of 1 GH for more then a day on eth pool.
my payout in ethereum was 0.08653034 eth.
what is wrong?
i hope i there is a after payment.
this can't be right i think.

The pool is working fine. Why are you buying hash though; what's the purpose?
You are just exchanging Bitcoins to Ethereum. Mining is all estimated, if you just go to an exchange an buy it then you won't lose your bitcoins.

BTW, this is your shares; it will trickle in: https://ethereum.miningpoolhub.com/index.php?page=dashboard

[goldline]

i bought hashpower on nicehash.


Speed at pool     103.5467 GH /s
Speed paying     101.6815 GH /s
Delta     +1.8652 GH /s (+1.80%)
Rejected at pool     1.4000 GH /s (1.33%)
Extra rewards     0.0000 GH /s
Timed-out speed     0.0000 GH /s

yes i now the link i have been mining for a couple of days now and it was oke.
but this mining speeds vs payout can't be right.

[aaronsace]

i bought hashpower on nicehash.


Speed at pool     103.5467 GH /s
Speed paying     101.6815 GH /s
Delta     +1.8652 GH /s (+1.80%)
Rejected at pool     1.4000 GH /s (1.33%)
Extra rewards     0.0000 GH /s
Timed-out speed     0.0000 GH /s

yes i now the link i have been mining for a couple of days now and it was oke.
but this mining speeds vs payout can't be right.

You don't get paid instantly, it comes in even after you have finished mining; it's PPLNS.
There is no purpose to what you are doing though.

[goldline]

mining is finished but amount is the same.

[bladescarr]

Can someone help me? I mine Vertcoin through CCMiner, and my total hashrate is about 800mh. However, my hashrate on Mining Pool Hub is about only 600mh. Why is my Mining Pool Hub hashrate so much lower than my actual rate?

Any help would be really appreciated. Thank you

[aaronsace]

mining is finished but amount is the same.

Every pool gets people complaining about not getting back what they paid into NiceHash.
The pool is working: https://ethereum.miningpoolhub.com/index.php?page=statistics&action=blocks

If you want certainty about how much Ethereum you will get back, you should use an exchange.

You have all the information about your shares the whole time it was mining:
https://ethereum.miningpoolhub.com/index.php?page=dashboard

[aaronsace]

Can someone help me? I mine Vertcoin through CCMiner, and my total hashrate is about 800mh. However, my hashrate on Mining Pool Hub is about only 600mh. Why is my Mining Pool Hub hashrate so much lower than my actual rate?

Any help would be really appreciated. Thank you

Mining pools do not know what your hashrate is. They estimate based on submitted shares over a few minutes.
Just use it as an indication that it's working.

[BlackHatLinux]

how long does a manual job change in hub worker need to take effect ? when I do a manual switch between ethash coins it just keeps mining ethereum. although when the pool auto-switches it follows the highest value coin, I don't get it? why does my manual change have no effect?

[bladescarr]

Can someone help me? I mine Vertcoin through CCMiner, and my total hashrate is about 800mh. However, my hashrate on Mining Pool Hub is about only 600mh. Why is my Mining Pool Hub hashrate so much lower than my actual rate?

Any help would be really appreciated. Thank you

Mining pools do not know what your hashrate is. They estimate based on submitted shares over a few minutes.
Just use it as an indication that it's working.

Oh, thank you. I guess that explains why sometimes one of my workers would have like 50mh, and other times it has over 200, haha

[aaronsace]

how long does a manual job change in hub worker need to take effect ? when I do a manual switch between ethash coins it just keeps mining ethereum. although when the pool auto-switches it follows the highest value coin, I don't get it? why does my manual change have no effect?

You need to use the 12xxx ports for that to work.

[goldline]

help some one what can i do about this?

ESTABLISHED BRIDGES
Pool   Status   Miners   Speed PH /s   Current diff
5.196.5.91:3332   Disconnected. Pool difficulty too low.   0   0.0016   2048.00000000
Total   0   0.0016   

[votk]

Vardiff is definititely still busted for Myr-gr, and the static diff setting doesn't work.
I've tested it for 30 minutes and the difficulty started high and stayed there (it even went higher for a couple of minutes before coming back down).
So I end up sending 1 share every minute lol..

[papampi]

Newbee on MPH ...
What does the Hub Worker Configuration do ?
I'm using Multi Pool Miner, Do I need to set the default job for my hub workers ?