All my rigs are running RX 480 8GB Cards - Mixed brands - Power Color, Sapphire, Asus Strix and XFX (all stock bios)- all running stable for 28 hrs now on v9. Average hashrate - 225 h/s per card. The Asus Strix cards seem to have the best hash rate on v9 (about 230 h/s). All rigs running Celeron Procs at about 10% with -i 8. Intensity settings don't seem to have any effect at all for me (0 to 8 makes no difference). Power usage rose about 6% average but gained roughly 20% hash rate from v8. Kudo's to Claymore. I'm not seeing any of these power spikes everyone is talking about but all i have is a meter at the wall.
what is "-i 8" ? n how to use it i have 4 rx 470 and 1 280X i am using this code ZecMiner64.exe -zpool eu1-zcash.flypool.org:3333 -zwal t1YZMnyXStuGKykkFxM6Lh8DTVJdTMx6R51.YourWorkerName -zpsw x Use: ZecMiner64.exe -zpool eu1-zcash.flypool.org:3333 -zwal t1YZMnyXStuGKykkFxM6Lh8DTVJdTMx6R51.YourWorkerName -zpsw x -i 8 -i 8 doesn't have to be 8. It can be anything between 1 and 8. 8 is just the most intense. ok if i want to use -i8 for 4X rx 470 cards and -i6 for 2X 280x cards what will be the code?
|
|
|
All my rigs are running RX 480 8GB Cards - Mixed brands - Power Color, Sapphire, Asus Strix and XFX (all stock bios)- all running stable for 28 hrs now on v9. Average hashrate - 225 h/s per card. The Asus Strix cards seem to have the best hash rate on v9 (about 230 h/s). All rigs running Celeron Procs at about 10% with -i 8. Intensity settings don't seem to have any effect at all for me (0 to 8 makes no difference). Power usage rose about 6% average but gained roughly 20% hash rate from v8. Kudo's to Claymore. I'm not seeing any of these power spikes everyone is talking about but all i have is a meter at the wall.
what is "-i 8" ? n how to use it i have 4 rx 470 and 1 280X i am using this code ZecMiner64.exe -zpool eu1-zcash.flypool.org:3333 -zwal t1YZMnyXStuGKykkFxM6Lh8DTVJdTMx6R51.YourWorkerName -zpsw x
|
|
|
v8 was working fine for me in v9 system hangs. i have to reboot system manully
|
|
|
R9 280x -220sol 1100/1500 Rx 480 -225sol 1300/1950 R9 380 160sol 1010/1550 Thanks clay ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) any idea about rx 470 setting?
|
|
|
i am facing this problem http://i64.tinypic.com/j9pw02.jpgcheck out GPU1 H/S i tried fresh install drivers with DDU, and tried with diffrent cards also same problem. my 1 gpu always give me bad hashrate also check afterburner ss. and i also tried diffrent pool. but same problem. even i tried with GA-970A-DS3P motherboard and i tried with 5 rx 470 cards also and tried 15.12 drivers too my config MB= gigabyte GA-990FXA-UD3 R5 RAM= 8GB VIRTUAL MEMORY = 16GB PROCESSOR= AMD FX6300 1200WATT PSU maybe 280x have overclocked but RX470 default bro. anyway problem solved by change PSU Try put in your monitor in GPU1 and see what's happens. . . I had the same problem that work't out for me. i tried it, cards works 15-20 seconds and screen blink and now it showing 0H/S Did you overclock this card? no bro im using factory bios and factory clock settings EVERY card on that print screen sure seems overclocked to me, put them all on stock and go from there. bro maybe 280x overclocked but RX470 is default. any way thanks problem solved by changing PSU
|
|
|
guys problem solved i just change PSU maybe my PSU have problem.
|
|
|
i am facing this problem http://i64.tinypic.com/j9pw02.jpgcheck out GPU1 H/S i tried fresh install drivers with DDU, and tried with diffrent cards also same problem. my 1 gpu always give me bad hashrate also check afterburner ss. and i also tried diffrent pool. but same problem. even i tried with GA-970A-DS3P motherboard and i tried with 5 rx 470 cards also and tried 15.12 drivers too my config MB= gigabyte GA-990FXA-UD3 R5 RAM= 8GB VIRTUAL MEMORY = 16GB PROCESSOR= AMD FX6300 1200WATT PSU Try put in your monitor in GPU1 and see what's happens. . . I had the same problem that work't out for me. i tried it, cards works 15-20 seconds and screen blink and now it showing 0H/S Did you overclock this card? no bro im using factory bios and factory clock settings
|
|
|
i am facing this problem http://i64.tinypic.com/j9pw02.jpgcheck out GPU1 H/S i tried fresh install drivers with DDU, and tried with diffrent cards also same problem. my 1 gpu always give me bad hashrate also check afterburner ss. and i also tried diffrent pool. but same problem. even i tried with GA-970A-DS3P motherboard and i tried with 5 rx 470 cards also and tried 15.12 drivers too my config MB= gigabyte GA-990FXA-UD3 R5 RAM= 8GB VIRTUAL MEMORY = 16GB PROCESSOR= AMD FX6300 1200WATT PSU Just put screen on card running slow and put it back on preferred card when card is running properly! ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) i m not understand u bro. pls explain more
|
|
|
i am facing this problem http://i64.tinypic.com/j9pw02.jpgcheck out GPU1 H/S i tried fresh install drivers with DDU, and tried with diffrent cards also same problem. my 1 gpu always give me bad hashrate also check afterburner ss. and i also tried diffrent pool. but same problem. even i tried with GA-970A-DS3P motherboard and i tried with 5 rx 470 cards also and tried 15.12 drivers too my config MB= gigabyte GA-990FXA-UD3 R5 RAM= 8GB VIRTUAL MEMORY = 16GB PROCESSOR= AMD FX6300 1200WATT PSU Try put in your monitor in GPU1 and see what's happens. . . I had the same problem that work't out for me. i tried it, cards works 15-20 seconds and screen blink and now it showing 0H/S
|
|
|
i am facing this problem ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fi64.tinypic.com%2Fj9pw02.jpg&t=663&c=W3egCnoOogNOTQ) check out GPU1 H/S i tried fresh install drivers with DDU, and tried with diffrent cards also same problem. my 1 gpu always give me bad hashrate also check afterburner ss. and i also tried diffrent pool. but same problem. even i tried with GA-970A-DS3P motherboard and i tried with 5 rx 470 cards also and tried 15.12 drivers too my config MB= gigabyte GA-990FXA-UD3 R5 RAM= 8GB VIRTUAL MEMORY = 16GB PROCESSOR= AMD FX6300 1200WATT PSU
|
|
|
well.. you can start mining with 2 to 3 gpus it depends on which graphics card you are purchasing . you can not buy ASIC miner coz it cost more the 100k . currently most profitable coin to mine is Zcash,Zclassic . you can buy rx 470 around 18,000 to 20,000 .
oh thanks bro for reply. btw i bought 10 rx470 at 16500 an where from u bro?
|
|
|
Dwarf pool started.
I am testing it. But the calculated speed is around 10% higher than the speed reported by Claymore. I also used the flypool, the speed is 6% below Claymore. I am not sure which one is better. Like any other pool, dwarf will take some time before showing stable results Yea give it some time. Dwarfpool is the most stable and consistent pool I've ever mined with. can any one give me code for .bat file for DWARFPOOL i am using this code for 5 cards but getting error zecminer64.exe -zpool zec-eu1.dwarfpool.com:3333 -zwal aaaaaaaaaaaaaaaaaaaaaaaaaa.MYRIGNUMBER1 -zpsw x Try changing your Port: Main-Port (vardiff): 3333 Stratum-Port (diff=8): 3334 for CPU Stratum-Port (diff=128): 3335 for videocards Stratum-Port (diff=512): 3336 for rigs Stratum-Port (diff=1024): 3337 for big rigs is my code ok? and rightnow i am using http://zcash.flypool.org is dwarfpool is better than flypool? WALLET: ************** PSW: x not -zwal -zpsw can u share me full code?
|
|
|
ok one more question i am new in mining my miner always show 820 H/S but in pool site show 740 to 760 why?
|
|
|
shadabahmed is ok ? because in dwarfpool you mine with your wallet ZecMiner64.exe -zpool zec-eu1.dwarfpool.com:3333 -zwal your wallet -zpsw x
thanks bro and is dwarfpool better than flypool?
|
|
|
Dwarf pool started.
I am testing it. But the calculated speed is around 10% higher than the speed reported by Claymore. I also used the flypool, the speed is 6% below Claymore. I am not sure which one is better. Like any other pool, dwarf will take some time before showing stable results Yea give it some time. Dwarfpool is the most stable and consistent pool I've ever mined with. can any one give me code for .bat file for DWARFPOOL i am using this code for 5 cards but getting error zecminer64.exe -zpool zec-eu1.dwarfpool.com:3333 -zwal aaaaaaaaaaaaaaaaaaaaaaaaaa.MYRIGNUMBER1 -zpsw x Try changing your Port: Main-Port (vardiff): 3333 Stratum-Port (diff=8): 3334 for CPU Stratum-Port (diff=128): 3335 for videocards Stratum-Port (diff=512): 3336 for rigs Stratum-Port (diff=1024): 3337 for big rigs is my code ok? and rightnow i am using http://zcash.flypool.org is dwarfpool is better than flypool?
|
|
|
I am going to set one of my rigs to Dwarfpool to see how it works. Mine On
Working well but taking a long time to find blocks ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) Until they get their hash rate up, the variance will be high but overall on a daily basis amount mined should be more due to them not skimming. I went ahead and put 4 rigs onto dwarfpool due to the higher reported hashrate (1400SOLs higher) and 0% Fees. Looking forward to a little higher ROI! pls share me .bat files code for dwarfpool i am getting error
|
|
|
Dwarf pool started.
I am testing it. But the calculated speed is around 10% higher than the speed reported by Claymore. I also used the flypool, the speed is 6% below Claymore. I am not sure which one is better. Like any other pool, dwarf will take some time before showing stable results Yea give it some time. Dwarfpool is the most stable and consistent pool I've ever mined with. can any one give me code for .bat file for DWARFPOOL i am using this code for 5 cards but getting error zecminer64.exe -zpool zec-eu1.dwarfpool.com:3333 -zwal aaaaaaaaaaaaaaaaaaaaaaaaaa.MYRIGNUMBER1 -zpsw x
|
|
|
i sent 100k coins to yobit but nothing receive there. i got this error
Status: conflicted Date: 11/28/2016 16:48 To: yobit 100000 LThwfHtTBTaN4eSirnyKmjepyNsQumFKcX Debit: -100000.00 LIR Transaction fee: -0.0087 LIR Net amount: -100000.0087 LIR Transaction ID: 4e6c4abc75431847f2e3467074b32165e276ce22a66eac9982ab4c0134790638-000
I've seen that restoring from a backup of a wallet.dat and synchronising can help fix this in some cases. thanks bro i will try this
|
|
|
i sent 100k coins to yobit but nothing receive there. i got this error
Status: conflicted Date: 11/28/2016 16:48 To: yobit 100000 LThwfHtTBTaN4eSirnyKmjepyNsQumFKcX Debit: -100000.00 LIR Transaction fee: -0.0087 LIR Net amount: -100000.0087 LIR Transaction ID: 4e6c4abc75431847f2e3467074b32165e276ce22a66eac9982ab4c0134790638-000
|
|
|
|