Also, how large were the other batches?
Batches of 10,000 chips, IIRC. |
|
|
|
it appears too when i set the clock to default (low) speed
Going to have to assume you have a bad hashing chip if that's the case  Only thing that makes sense Sounds like a case for a warranty replacement, unfortunately. |
|
|
|
any idea of the x in the chip?
Does the x appear when you set your clock to default speed, or does it only appear with the clock on it's High setting ? |
|
|
|
Ok, I had to know...I disconnected all the computer components and plugged it into a kill-a-watt ...it's drawing about 280 watts.
Thanks for the report. That's a pretty respectable number. |
|
|
|
What happens when all the GPU miners (70%+ of miners) move to scrypt
This will never happen. |
|
|
|
if you are not okay with that, you can pay 50BTC for a 10Gh/s (13 if you over clock Blade from ASICMiner)
Since you put it that way, I procured another AM Blade for less than 50 BTC. I hope to have it by next Tuesday. Additionally, I have K16's on order through Steamboat's project that will give me a higher total hashrate than your product at a cheaper cost, by about 20 BTC. Thank you very much. |
|
|
|
|
I don't see the big deal here if you are long on Bitcoin. I've been mining for three years, and I hope to be mining for the next three years and beyond.
All this talk of not making ROI in 3-6 months seems a bit short-sighted IMO.
|
|
|
|
|
Scam. Avoid. If you have downloaded this, scan your system for malware immediately.
If something like this were possible, these forums would be on fire right now.
|
|
|
|
Not a scam, but I can read chinese, he's so arrogant that I dont want to deal with
Some elaboration for us silly Anglo's would be appreciated. |
|
|
|
How are you guys undervolting the Maltas? I have them running stock and they are running at 100C on each card!
MSI Afterburner or Sapphire Trixx should do the job. Make sure you verify the settings take on the second GPU. |
|
|
|
Very nice ! Grats on finally getting them in ! |
|
|
|
|
HashTech, have you received any notice from Avalon about your chip shipments ?
|
|
|
|
Should we make a thread about K16 operation (power, cabling, firmware) etc..?
This would be a great idea. Dogies thread on powering the AM Erupter Blades was very helpful, and something similar for the K16 project would be wonderful. |
|
|
|
I understand if you didn't have time to talk to your lawyer yet I understood that BFL lawyer is too busy talking with other customer lawyers. Not to put too fine a point on it, but it appears (so far) that "BFL lawyer" is too busy ignoring customer lawyers and demand letters, and looking to create more problems for themselves
To my understanding, the system frowns upon ignoring efforts to reconcile a dispute, prior to attending court.EDIT: Official response received through my attorney this aft. Ceasing discussing anything related to Butterfly Labs or Josh while the next stage of this dispute is being worked through. Thanks for the support everyone. |
|
|
|
It's someone you know.
It's gut-wrenching to think that, but it is plausible :| What are the odds ? How was his address obtained ? Did he put it out there ? Need more info. Either way, good luck recovering your rig and finding the perp. That's just awful, and peculiar, to have such a specifically targeted robbery |
|
|
|
You are full of shit, plain and simple.
Hey, while you are here, I have a call scheduled tomorrow afternoon. Can I get a formal acknowledgement that you are ignoring our first letter ? Would help me plan my day better. *hugs* |
|
|
|
|
Show Posts
