What's the cpu usage while mining?
Try increasing the aggression level.
I just checked using 'top' and I'm running @ 50% on one core. seems to be the core with the 5850 on it. What is eating it? o.o Here is a picture  |
|
|
|
What's the cpu usage while mining?
Try increasing the aggression level.
I just checked using 'top' and I'm running @ 50% on one core. seems to be the core with the 5850 on it. What is eating it? o.o |
|
|
|
|
I changed agression from 9 to 14 and it went up to ~81% -.-
|
|
|
|
|
Is there a command to check cpu usage in ssh?
|
|
|
|
So, I just got a 5850 and I'm running it on bamt with my other 5970. Oddly enough, it won't hit 100% load. I've tried running it without the 5970 in the board, and it does the same thing. Psu is 750w corsair and runs perfectly fine. Any ideas?  |
|
|
|
 So I got a new 5850 today, and my load is staying at ~80% I copied the config over and removed all overclocking besides memclock. What am I doing wrong? o.o |
|
|
|
My rig has a hard time rebooting from the ssh command. Most of the time it sits there until you manually reboot it yourself. I'm getting some errors like "cant read os media" etc. Is this a motherboard specific problem?
never type reboot always type coldreboot and above all.. leave that thing alone and let it mine ok, I'll remember that. Any specifics why 'reboot' doesn't work? |
|
|
|
|
My rig has a hard time rebooting from the ssh command. Most of the time it sits there until you manually reboot it yourself. I'm getting some errors like "cant read os media" etc. Is this a motherboard specific problem?
|
|
|
|
just a suggestion, but could you make a list of the mobo's that work?  |
|
|
|
I like to run mine @ 38% fan, 675mhz and 0.95v when I sleep |
|
|
|
6.54321  |
|
|
|
|
when you drop a rubber ball does it stick to the floor?
|
|
|
|
|
NOPE, back up. Volatile trading atm. Buy/sell/buy/sell.
Welcome to the world of trading
|
|
|
|
|
Also, is there a way to script a clock/voltage/fan change at specific times? I manually change the clocks when my roommate and I go to sleep. (out of curtesy)
|
|
|
|
A bug that I've noticed (not sure it it's related to linux)
If you plug in a monitor to a video card while bamt is running everything works fine. But when you unplug it, the web-status-thingy-ma-jig spits out an error until it's restarted.
Anyone else have this issue?
 No seriously it probably shouldn't do that but why are you using a monitor w/ BAMT? It is like putting a spoiler on a dump truck. SSH is all you need for management and for routine monitoring you don't even need that, a web browser works just fine. I normally use SSH, but I'm not 100% in linux yet. I have the monitor to fix my screwups in the putty. |
|
|
|
A bug that I've noticed (not sure it it's related to linux)
If you plug in a monitor to a video card while bamt is running everything works fine. But when you unplug it, the web-status-thingy-ma-jig spits out an error until it's restarted. it's a bunch of []{}\/ and |'s with a reference to status.pl inside it.
Anyone else have this issue?
a pastebin or other capture of the exact message would be helpful, can only guess without it. I haven't hooked a monitor up to a bamt rig in quite some time. __.....__ .' ':, / __ _ __ \\ | |_)) || |_))|| | | \\ || | || | || _, | status.pl ||.-(_{} | |/ ` | ,_ (;|/) \\| {}_)-,||` \\;/,,;;;;;;;,\\|//, .;;;;;;;;;;;;;;;;, ,;;;;;;;;;;;;;;;;,// \\;;;;;;;;;;;;;;;;,// ,';;;;;;;;;;;;;;;;' One of the BAMT tools has suffered a fatal error. Can't use an undefined value as a HASH reference at /usr/lib/cgi-bin/status.pl line 88. Defiled: Unable to record this travesty in the deathlog! Why?: Permission denied
is all i see reproduced it twice by unplugging the monitor from a 5970. |
|
|
|
So, all you 5970 owners, what do you run your 5970's at? I currently have one running at 775mhz @ 1.025v & 50% fan @ 65C Trying to see how low I can go without boot looping myself Post'em! |
|
|
|
|
A bug that I've noticed (not sure it it's related to linux)
If you plug in a monitor to a video card while bamt is running everything works fine. But when you unplug it, the web-status-thingy-ma-jig spits out an error until it's restarted. it's a bunch of []{}\/ and |'s with a reference to status.pl inside it.
Anyone else have this issue?
|
|
|
|
|
in gpumon, my 5970 shows "99% Mhs 0/0 Low Mhs"
I checked online and I am mining shares, but how can I fix this?
|
|
|
|
|
Show Posts
