Yes that's exactly right! Everyone in here that is mining, probably on nano, if you have a card or 2 (GPU) to point to hereominers that would be really nice. You still will make the same or more as you will on nano,. Granted it may take a little longer for your payouts but it will be the same amount of coins for your shares submitted, just get paid in one big payout vs hundreds of tiny ones  Ok, great pool, with low fees low minimums and lots of useful info displayed on pool. Give it a try with just a couple of your cards!  Beter use electroneum.miningpoolhub.com u can do manual payments, auto payments, payments directly to exchange and u can do an auto algo switch. When we got our rewards on nanopool (if we ever get that rewards because now when almost everything is working, they say not a word anymore about the mining rewards what we should get) i am also moving back to miningpoolhub. For now it's a waste if ur mining ETN at all. The diff is to high again and almost all blocks got found by 1-2 big players (etn themself maybe i dont know), pools find almost no blocks. Those 1-2 big players are also dumping every minute-hour the coins and the price is getting lower and lower. When is the 51% attack comming? It's easy to get more then 50% of the total hashrate, before the fork (when asics were active) i earned more etn by mining, this is crazy ha. Nicehash should be blocked i think, they fucking the coin up. |
|
|
|
|
Somebody knows more about the mining rewards we should get on nanopool for finding that first fast blocks?
I hope it's not based on the shares u can find on ur worker/wallet page, because mine get reset to 0 because of adding an e-mail adres in the config file.. ^^
|
|
|
|
fairhash seems to be ok. I just made 7.5 ETN in an hour. Shouldn't take to long to get to 50 Yes it works as it should and the hash rate is coming back up some now. And I may end up mining back on there for ETN. After I pulled out of pool, I have a pending balance of 45... so now I have to point a miner back to the pool and mine 5 more coins so my pending balance will get paid lol, cant win...  Its just many miners have a couple cards etc. and want to mine, but for low hash miners it will be some time to see a payout is all. I'm still waiting to see if all the kinks are worked out with ETN everywhere and maybe see the price start to move up a little.  I certainly hope so! My first choice is to mine this algo (uses less power)  What gpu are u using because u mine so slow? |
|
|
|
que moeda lixo tem 5 dias que mandei etn pra cryptopia e nao chegou,pra mim uma ja nao serve mas ,tantas moedas boas ai e eu perdendo tempo.
English please? Why do you bother? Anyway I Google translated... He's calling the coin trash because he has send some coin to Cryptopia since 5 days ago and they have not arrived yet, so he's going to quit following the project. I won't even try explain him why his transaction is stuck, if he knew English he would have found the answer in the last 2 pages. In the last 50 pages already i think xd Anyway.. I just tested my first transaction after the fork to my mobile wallet, coins where very fast in my mobile wallet. I think the mobile miner payments can already get started? |
|
|
|
que moeda lixo tem 5 dias que mandei etn pra cryptopia e nao chegou,pra mim uma ja nao serve mas ,tantas moedas boas ai e eu perdendo tempo.
English please? |
|
|
|
Guys join our Electroneum pool https://electroneum.fairhash.org/pool address pool.etn.fairhash.org ports 3333 5555 7777 Feel free to join! *Pool support Workers *0 hr e-mail notification *SSL connection *telegram bot with new blocks notification and 0 hr alert *individual payout level *24h support and more.... but you forget to write that your min pay out is 50 etn... I agree. They need to lower it to 5 coins minimum. Screw that dopey policy of "Pool Hopping is Prohibited" BS.  Many would like to try a pool feel it out but not get trapped waiting for days on a payout. That's why everyone has left and now it takes a day almost to block.... Many small miners want to feel and see something happening from there miners. Not have to wait forever. FairHash you need to lower it to 5 coins, announce it in here in big red letters and you will see miners coming back. and get rid of that stupid pool hop warning, its ridiculous. If people want to come and go let em! at least you will have miners checking you out and MAYBE they will stay PS: I am getting ready to pull out as soon as we block (whenever that may be now?) on your pool, and when I do you will definitely fall below 1 M/h ....... lower that to 5 The problem with this small transactions are the dumbass people what like to do spamtransactions. I remember before the fork many pools decided to put the min payout higher because many people were spamming the blockchain with 1 ETN transactions (combined with the old to low fee). |
|
|
|
What about bonus on the 26 firsts blocks after fork ? Nanopool found all these blocks.
Yeah i am also wondering (well the situation is: found 1 block in 1 hour after the last blockfound = 200k etn, 2 hours 100k etc etc, something like this) when we can expect this. I guess nanopool owner need to calculate and send to the miners what were active on that blocks in the beginning of the fork, could take some time. But i also want to know when we can expect the rewards |
|
|
|
Hey Thanks JoenNL, I think I just realized something I may have been doing wrong on the CLI side.... I was creating a new account using the same name and pass I used in the older version CLI pre-fork... that was not right, but my thinking was it was a total new chain per se' but its not lol So atm I am updating the electroneumD seems to be progressing. I will follow up and let you know on that part. Also I went ahead and created a new account name and pass etc for the CLI. Actually I kind of just jumped back into the ETN game without a lot of thought to things as I had been here before and mined etc using Paper wallet and so forth. So hopefully it will update and my new account will sync up Thanks man!! Wow he but look out.. Are u creating an new wallet.''dat'' file? Because normally u could use ur old one. What u should do is running the node/deamon (ElectroneumD) for syncin, when this is 100% (u will get a message as u probably already know) and after u can start the wallet client and open ur old wallet file + password. But first always fully sync and after start the client. Do not start the client while the deamon is syncin (well it should not be a problem, but this is the way i always did) And sure, no problem! |
|
|
|
So is it ok to mine directly to Cryptopia these days?
No, dont mine directly to Cryptopia Why are there so many mining to Cryptopia on Nano? or at least it says Cryptopia on the miners page  I am using 1 miner now with payment ID on Nano.... why not lol got to get off of Fairhash Well u can also use the wallet address on ur mobile etn app (atleast, if u have an Android device). Maybe u know, one day u are walking down the street and whoops ETN went to 20 dollar each. Then u can drive with ur car to the Lamborghini dealer to buy an Lambo (don't care what 2018 model it is, just buy one because the whole cryptoplanet is talking about lambo's) with the Android ETN app LOL ya I know its amazing I guess its ok to dream a little I'm really wanting to know the working CLI version simple wallet to use now, that's always worked best for me with old algo in the early days. With a paper wallet to start out with.... But there is an cli version from ETN for what i know, i used it on my own pool so.. U can download the cli version (without GUI ofc) on github. https://github.com/electroneum/electroneum/releasesSure np, u can donate to the etn below my message ^^ (kidding) Lol, ya I hear ya... that's the CLI version I am trying to sync up and gave me that message "we may have forked" it gets so far updating blocks then acts strange and seems to just sit there. Maybe I'll load it up again and forget about it. Maybe it just will take days to sync up..... Thank you tho! that confirms it is the right one I have... Yeah try it again indeed and maybe u need to start it as administrator (dont know if ur using windows, or use sudo on ubununutntutnutu). It should be the correct version (when i read the discription), but.. I didnt test this one, i was testin an ETN pool before the fork. If u want i can test this version (but please, try first by ur self again). U know what? I gonna test it right now for you. 2018-06-07 16:52:09.994 [P2P6] INFO global src/cryptonote_protocol/cryptonote_protocol_handler.inl:1152 [1;33m[162.244.83.24:26967 OUT] [b]Synced 501/308334[/b][0m okay, this gonna take a while ^^ (ps, i dont use the blockchain.raw to speed it up). When and where are u gettin that message about the fork? Also as i can see i am busy syncin to 308334 so that's also correct. If u get the fork message around the block where ETN got forked, i will need an hour or more to check that message (but i dont know why he should do it, looks fine so far). |
|
|
|
So is it ok to mine directly to Cryptopia these days?
No, dont mine directly to Cryptopia Why are there so many mining to Cryptopia on Nano? or at least it says Cryptopia on the miners page I am using 1 miner now with payment ID on Nano.... why not lol got to get off of Fairhash Well u can also use the wallet address on ur mobile etn app (atleast, if u have an Android device). Maybe u know, one day u are walking down the street and whoops ETN went to 20 dollar each. Then u can drive with ur car to the Lamborghini dealer to buy an Lambo (don't care what 2018 model it is, just buy one because the whole cryptoplanet is talking about lambo's) with the Android ETN app LOL ya I know its amazing I guess its ok to dream a little I'm really wanting to know the working CLI version simple wallet to use now, that's always worked best for me with old algo in the early days. With a paper wallet to start out with.... But there is an cli version from ETN for what i know, i used it on my own pool so.. U can download the cli version (without GUI ofc) on github. https://github.com/electroneum/electroneum/releasesSure np, u can donate to the etn below my message ^^ (kidding) |
|
|
|
So is it ok to mine directly to Cryptopia these days?
No, dont mine directly to Cryptopia Why are there so many mining to Cryptopia on Nano? or at least it says Cryptopia on the miners page I am using 1 miner now with payment ID on Nano.... why not lol got to get off of Fairhash Well u can also use the wallet address on ur mobile etn app (atleast, if u have an Android device). Maybe u know, one day u are walking down the street and whoops ETN went to 20 dollar each. Then u can drive with ur car to the Lamborghini dealer to buy an Lambo (don't care what 2018 model it is, just buy one because the whole cryptoplanet is talking about lambo's) with the Android ETN app |
|
|
|
Cryptopia clearly says not to mine directly to the account wallet there, but it sure looks like some are doing so on Nano. I may try later, see what happens. anyone know the minimum payout on Nano?
Well the reason (normally) why u should not mine directly to an exchange is because of the wallet id. Some coins on an exchange need an wallet address + payment id for deposits. So in this case (again, normally..) if u can enter ur own ''wallet address''.''payment id'' in ur .bat file or .conf, it should be fine. On some pools u can only use an wallet address and not an payment id, in this case ur coins will never arrive on the exchange. Why contraband says not to do it, i dont know why.. But.. possibly there is a reason right now for not doing it (i dont know what the reason is, but normally its not any problem as long as u can do what the exchange need (walletaddres+payment id)). On nanopool i am using my own address and not the cryptopia address. |
|
|
|
Network speed at 49.25 MH/sec
Nanopool speed at 11.80 MH/sec
Yet no block found by Nanopool for 2,5 hours? Yeah right... second time this happens in 24 hours.
I'm mining on them until I reach my 100 ETN for payment, then I'm out! Not only they charge 2% fee but they're either hiding blocks that they mine or they're doing something wrong with their settings.
One good pool is spacepools but isn't there any other trustworthy pool I can try? Any suggestions?
etn team suggested both nanopool and also electroneum.fairhash.org the last days (along with the spacepools one who stands still) there might be some private pools that mine but with a lot of luck (that means that they basically find most blocks) and that also means that the nanoppol is so unlucky these days!!!!!!!!! suggest nanopool to change their name to luckypool , just in case they revert luck to their favor from block 307580 to current (308285) it is some 700 blocks nanopool has succeeded to find some 115 Also electroneum.miningpoolhub.com is a big pool what earned the trust a long time ago. |
|
|
|
Be careful. After the fork the difficulty abruptly dropped on electroneum and tons of people started to mine it. When difficulty dropped to the bottom the blocks suddenly couldn’t be found at about 23.42 on nanopool. At the same time the power of the pool went up to 53mx at the peak, everyone bought orders on nicehash. https://i.imgur.com/bWS4Qea.jpghttps://i.imgur.com/JKzGaHD.jpgNew blocks couldn’t be found for about an hour but the net was fine. Just a food for thought, make your own conclusions... Yes i also found that out, (speculation) asics moved to nicehash xd |
|
|
|
any pools mining transactions successfully? we need to mine transactions if they are working already
For what i see nanopool and fairhash does? as far as i know nanopool is still mining empty blocks Why? when i compared the blocks found on nanopool and after on blockexplorer.electroneum, they were included transactions.. i dont know where u talk about..? Also 1 block was found on nanopool with a big load of transactions, showing on the blockexplorer... I saw 0 empty blocks find by nanopool, all were included transactions my bad but when i last checked it was still empty. i stand corrected I dont know what the block count was when u checked, but when the transactions started, they were also in the nanopool blocks. At least, for what i could see on nanopool - blocks and the blockexplorer from etn. |
|
|
|
any pools mining transactions successfully? we need to mine transactions if they are working already
For what i see nanopool and fairhash does? as far as i know nanopool is still mining empty blocks Why? when i compared the blocks found on nanopool and after on blockexplorer.electroneum, they were included transactions.. i dont know where u talk about..? Also 1 block was found on nanopool with a big load of transactions, showing on the blockexplorer... I saw 0 empty blocks find by nanopool, all were included transactions |
|
|
|
Electroneum network Hash rate: 25.14 MH/s
NanoPool Hashrate
35 MHS
Whats happened?
oh wait, look at nanopool at the blocks, that's not correct also. Think nanopool is showing not the correct stats at this moment  Nanopool shows not the correct block number, not correct hashspeed etc. I also saw on 1 miner that the nanopool server was disconnected, few seconds later it was connected again |
|
|
|
any pools mining transactions successfully? we need to mine transactions if they are working already
For what i see nanopool and fairhash does? |
|
|
|
Yahoo! And processing transactions! Yeah!!! Nice job ETN team! Yeah looks like everything is working now, but... now we are asic proof / anti asic Great a lil bit offtopic, about nanopool: Next thing, why nanopool only have an static diff?? In the last 5-6 days it was no problem because the network diff was high also. But now it's shit with this high diff, i get 0 shares in some blocks so no rewards.. Not any way on nanopool we can set an own diff? (i know, nanopool site is talking about an static diff). |
|
|
|
Apart from Nanopool, the blocks are being found on electroneum.fairhash.org as well. The last one 307578 and the difficulty (13,7) is now drastically reduced.
ah yes i see, blocks are rolling now again on nanopool (307580 and 81) Great to see this Hope the big rents are gone now so we can do it on our own |
|
|
|
|
Show Posts
