|
Hi friends!
I found not expensive 6990. Is it good to mine Zec on it?
How much speed it could run ?
|
|
|
|
I managed to get speed similar to v9.0 with speed stability better than in v9.2. I will release new version in 2-3 days including this and some other improvements.
Veeeeeeery nice |
|
|
|
Hi guys ! Correct me if Im wrong. If i see 1100 watt from the wall on my wattmeter , so on 80+ Standard PSU its 1100*0.8=880 power load of PSU. And its good enough for PSUs working conditions (1000Watt Chieftech)?
I mean its about 85% of its full load.
Right ?
If you have a 1000W PSU how can you see 1100 at the wall? Something is wrong... The 80+ standard is a measure of efficiency. No PSU will deliver 100% of its nominal output, 10~20% is lost in heat. Therefore, a 1000W PSU will only deliver ~800W within a limited range of loads, and not at full load. Got it? A 1000W PSU will never "suck" 1100w from the wall.... That is not correct. See here: http://www.tomshardware.com/reviews/corsair-ax1500i-titanium-power-supply,4276-4.html"Load Regulation And Efficiency Measurements The first set of tests reveals the stability of the voltage rails and the PSU's efficiency. The applied load equals (approximately) 10 to 110 percent of the maximum load the supply can handle, in increments of 10 percentage points...... 1500W PSU Output - 1549.07W, efficiecny -89.04%, PSU input 1739.84W ......" Interesting article. Looks like 50% As well as 100% load are not efficient mode of operation. from 80 to 90 % is the best PSU load. |
|
|
|
Hi Claymore, thanks for your work. I believe I found a bug on Ethman I would like to use the http address of a PC instead of the IP address when adding the miner to ETHman Now, on the "Add Miner" window, when I write the http address as in " http://subdomain.domainname.com" the software strips out the "http://" part and add "http//" without the colon, hence is not working (I see that if I click on "view miner console"). Even if I input the http address without the http:// bit, as in "subdomain.domainname.com" it still doesn't work/update but if I right click and choose "view miner console" it direct the browser to the correct subdomain and the stats shows fine on the website but on the Ethman windows it shows nothing and the miner is shown in red. Could you please shed some light on why this is happening? Is it a bug or is http not meant to be used / not working straight into ETHman? :/ Im allsow not Claymore  but i think your messing with ethman wrong way. Miner just opens monitoring port , lets say 3333. It is not web page , so dont put http:// or any http in add miner menu. Its just a service of the miner with can output info to your ethman , connecting to that IP:port. Just dont user http and domain name. Use Ip adress + port. BR. P.S. Yes. Miner can output stats in html format if you open your miners http://IP-ADDRESS:port in browser. But it not applies to ethman. |
|
|
|
Hi guys ! Correct me if Im wrong. If i see 1100 watt from the wall on my wattmeter , so on 80+ Standard PSU its 1100*0.8=880 power load of PSU. And its good enough for PSUs working conditions (1000Watt Chieftech)?
I mean its about 85% of its full load.
Right ?
If you have a 1000W PSU how can you see 1100 at the wall? Something is wrong... The 80+ standard is a measure of efficiency. No PSU will deliver 100% of its nominal output, 10~20% is lost in heat. Therefore, a 1000W PSU will only deliver ~800W within a limited range of loads, and not at full load. Got it? A 1000W PSU will never "suck" 1100w from the wall.... A quality 1000w PSU easily outputs 1000w to DC side, depending on efficiency under 100% load you see much higher numbers at the wall. For example, corsair rm1000 at 100% load - 89% efficiency @ 230Vac - 1123w (1000/0.89) at the wall. And you can easily overload them too, not saying I would do it but it is possible. Like i thought . Thanks all for the info and help. Im cool now. Wattage of the PSU is the output ability not input. |
|
|
|
|
Hi guys ! Correct me if Im wrong. If i see 1100 watt from the wall on my wattmeter , so on 80+ Standard PSU its 1100*0.8=880 power load of PSU. And its good enough for PSUs working conditions (1000Watt Chieftech)?
I mean its about 85% of its full load.
Right ?
|
|
|
|
|
@Claymore. Could you add stat option to display number of accepted shared by each gpu ? It will be usefull to find degradated gpu.
BR.
|
|
|
|
Hey guys! Can somebody tell , what is hash speed for rx470 4 gb for PASC, SIA and DCR on same -dcri ?
I cant decide what to dualmine with eth.
BR...
PASC and DCR are most profitable. SIA is the least profitable. Search my posts on here to find the DCRI Yeah , I saw your post. Now Im getting 170 Mhs ETH + 1700 PASC on 6*rx470 4g . Should i switch to DCR , or its best prof. second coin ? I just dont know how much speed in DCR to use whattomine. BTW , My dcri is 10. Well you just have to run CM with DCR and see what speeds do you get  Always use your own hashrate in calculators. Just been lazy but you're absolutely right |
|
|
|
Hey guys! Can somebody tell , what is hash speed for rx470 4 gb for PASC, SIA and DCR on same -dcri ?
I cant decide what to dualmine with eth.
BR...
PASC and DCR are most profitable. SIA is the least profitable. Search my posts on here to find the DCRI Yeah , I saw your post. Now Im getting 170 Mhs ETH + 1700 PASC on 6*rx470 4g . Should i switch to DCR , or its best prof. second coin ? I just dont know how much speed in DCR to use whattomine. BTW , My dcri is 10. |
|
|
|
|
Hey guys! Can somebody tell , what is hash speed for rx470 4 gb for PASC, SIA and DCR on same -dcri ?
I cant decide what to dualmine with eth.
BR...
|
|
|
|
Hey guys. Im confused for a long time. Been mining only eth on my 1st rig with 6*rx 470s doing 168 Mhs. Rig is on 1kw psu and consuming 860 watt at the wall. I think its about max power limit of psu but id like to do dual mining another coin as well. Could you plz answer, if i run dual mining, can i stay below 1kw power hugry situation and do more prof. then eth only? And what coin is to be ?
I can't speak for Sia or Libr but for sure you will have a problem dual mining DCR with that rig as is. As an example, I have been running 2 6x470 rigs (on 1200w PSUs) and with ETH only, it pulls about 820-830W. But with ETH+DCR, it runs around 970-1000w on v9 with DCR set to 27-30. I just built a 3rd rig and am in tweaking mode currently trying to get it to run dual effeciently. Even with DCR set to only 20, it still pulls about 940W. Most people here recomend not exceding 85% load on your PSU. That's why i have set my personal limit to 1kw on my 1200w PSUs (about 83%) or maybe a bit lower. Given you already at that ~85% thresshold, I would not recommend trying to dual mine with that rig... unless you are willing to turn down intensity on ETH & lower your overclocks. Even then, would probably be challenging but good luck! I can confirm those numbers - on a 6x RX 470 rig when mining Eth + DCR I pull as much as 980 from the wall, even undervolted. Personally I chose to mine ZEC for the summer months since it sips power at <760 at the wall while staying cool and quiet. I'm using an EVGA SuperNOva 1300 watt Gold PSU. Thank you sir. Im thinking to get stronger PSU. |
|
|
|
Hey guys. Im confused for a long time. Been mining only eth on my 1st rig with 6*rx 470s doing 168 Mhs. Rig is on 1kw psu and consuming 860 watt at the wall. I think its about max power limit of psu but id like to do dual mining another coin as well. Could you plz answer, if i run dual mining, can i stay below 1kw power hugry situation and do more prof. then eth only? And what coin is to be ?
I can't speak for Sia or Libr but for sure you will have a problem dual mining DCR with that rig as is. As an example, I have been running 2 6x470 rigs (on 1200w PSUs) and with ETH only, it pulls about 820-830W. But with ETH+DCR, it runs around 970-1000w on v9 with DCR set to 27-30. I just built a 3rd rig and am in tweaking mode currently trying to get it to run dual effeciently. Even with DCR set to only 20, it still pulls about 940W. Most people here recomend not exceding 85% load on your PSU. That's why i have set my personal limit to 1kw on my 1200w PSUs (about 83%) or maybe a bit lower. Given you already at that ~85% thresshold, I would not recommend trying to dual mine with that rig... unless you are willing to turn down intensity on ETH & lower your overclocks. Even then, would probably be challenging but good luck! Thanks for the answer. Like i thought, even with low second coin intensity , i will catch critical psu operation state. Pitty. But its life. Thank you very much again. |
|
|
|
|
Hey guys. Im confused for a long time. Been mining only eth on my 1st rig with 6*rx 470s doing 168 Mhs. Rig is on 1kw psu and consuming 860 watt at the wall. I think its about max power limit of psu but id like to do dual mining another coin as well. Could you plz answer, if i run dual mining, can i stay below 1kw power hugry situation and do more prof. then eth only? And what coin is to be ?
|
|
|
|
Hello, i have two rigs: 1. rig with 5 RX 480 8 GB sapphire nitro OC and today i add one 470 8gb. I make 177 mh, consuption is around 940 w/h( before it was 800w without rx470) 2. rig with 6 sapphire rx470 8 GB nitro OC with anoraks mode bios, i make 164 MHash, but consuption is around 920w/h, which is high if i compere with rig 1. Do you think i can get less power for same hasrate?I mine only ethereum. I was looking on web page what to mine, but there is less power needed for a little less MH. any advice? any custom rom suggestion,which is more power friendly thank you for help Ive got rig with 6 giga rx470 4 gb . 168 Mhz Eth only . 1195/2000 clocks, -95 mV AB settings. 860 Watt from the wall. |
|
|
|
|
So , even in eth-only mod need to tune dcri to get max eth-speed ?
|
|
|
|
|
Hello friends. Thinking to change mining coing on my rig. With 6*rx470 what is more profitable ? ETH (only mod) or ZEC ?
|
|
|
|
How to connect to dwarfpool,keeps connecting me to Flypool,no matter what stratum I use??
Look at config.txt or pool.txt may be it cannot conect to dwarf somehow and trying failover pools ? |
|
|
|
How you put 6 carda in one psu of 850w ?? And what clock you put to do 29.4 mh/s ? You recommed rx470 instead rx480? Your rx470 is sapphire nitRO 4gb? ? Thanks Almir There is a small difference between RX470 / RX480 both in performance and in power usage. IMO RX480 is only interesting if you can have it for less than 10% more than RX470. With my RX470 i get about 29.4 Mhs for about 120W each (actually if you take into account PSU efficiency and system draw, you get about 140W/card : 850W at the wall for a 6 GPU miner). Although the numbers are not bad, it's not that optimized so i guess some people can achieve more hashes with better efficiency. I think you should be able to achieve a little bit more with the RX480 depending on how you flash your BIOS and tune your GPU. Im have two sapphire rx470 and im use claymore.tô miner eth Im get speed of 55.5 with two cards A value of 27.5 for each If im purchase rx480 nitro of 4gb ? Im can get more than 30 mh/s ?? Obs : what is the power usage of rx480 nitro with more than 30mh/s ? Thanks Almir Have any card until 250 us that im can do 35mh/s in eth??
I don't think so, but if you buy a RX470 you will be able to get something close to 30MH/s for under 200 usd Well , you could manage to make 6*rx cards to work on 850W PSU. But it will be 850-870 wattage power draw from the wall , almost PSUs maximum load. rx 470 is about 15-20 watt less power draw than 480. Of coz. its in undervolting conditions. My rx470s run at 1100/2000 and 28 Mhs Which brand? 4gb or 8gb? which type of memory? Samsung or hyn? I am using dual min but problem is i get low eth hash rate (from 29.3 to 22MHs drop) if i mine pascal in dual mining If i mine sia, the drop is almost negligible (from 29.3 to 28.7) and i get 425 MH/s for Sia. I had to give up mining pascal because of this. I am using nitro+ 8b OC with samsung mem. May switch to sgminer because i heard it's giving 10% more hashrate. Ive got Gigabyte Gaming G1 rx470 4 gb with hynix RAM. I dont use dual mining due to less prof. compared to higher risk to brake GPU or shorter its life. |
|
|
|
How you put 6 carda in one psu of 850w ?? And what clock you put to do 29.4 mh/s ? You recommed rx470 instead rx480? Your rx470 is sapphire nitRO 4gb? ? Thanks Almir There is a small difference between RX470 / RX480 both in performance and in power usage. IMO RX480 is only interesting if you can have it for less than 10% more than RX470. With my RX470 i get about 29.4 Mhs for about 120W each (actually if you take into account PSU efficiency and system draw, you get about 140W/card : 850W at the wall for a 6 GPU miner). Although the numbers are not bad, it's not that optimized so i guess some people can achieve more hashes with better efficiency. I think you should be able to achieve a little bit more with the RX480 depending on how you flash your BIOS and tune your GPU. Im have two sapphire rx470 and im use claymore.tô miner eth Im get speed of 55.5 with two cards A value of 27.5 for each If im purchase rx480 nitro of 4gb ? Im can get more than 30 mh/s ?? Obs : what is the power usage of rx480 nitro with more than 30mh/s ? Thanks Almir Have any card until 250 us that im can do 35mh/s in eth??
I don't think so, but if you buy a RX470 you will be able to get something close to 30MH/s for under 200 usd Well , you could manage to make 6*rx cards to work on 850W PSU. But it will be 850-870 wattage power draw from the wall , almost PSUs maximum load. rx 470 is about 15-20 watt less power draw than 480. Of coz. its in undervolting conditions. My rx470s run at 1100/2000 and 28 Mhs |
|
|
|
Anyone knows why ZEC deposits are temporary disabled on Poloniex for almost 16 hours?
And what will be with send coins from pool ? I think they are doing some maintenance. You will get and see your coins after they fininsh the maintenance. They twit :
Poloniex Exchange 6 hr.
Working as quickly as we can to resolve the connectivity issue.All back to normal I see. Thank you for the update. No problem friend |
|
|
|
|
Show Posts
