Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[raducuc]

anyone having problems with their internet dropping for a little, then when it comes back the miner just hangs there forever?

this is my log

Code:

22:13:35:095	1ce0	ETH: checking pool connection...
22:13:35:099	1ce0	send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

22:13:35:117	1ce0	got 248 bytes
22:13:35:121	1ce0	buf: {"id":3,"jsonrpc":"2.0","result":["0xd360c00467a816e2738743381c0253481df6be1d4a4f357f53087800e21fa85a","0x3bdc9df6827f9db2a52b71fe21b847066a233755fd6b15bdb62a9c5e0aeb1d14","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x36d834"]}

22:13:35:125	1ce0	parse packet: 247
22:13:35:129	1ce0	ETH: job is the same
22:13:35:133	1ce0	new buf size: 0
22:13:40:502	1ce0	send: {"id":6,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x4cf0237", "0x00000000000000000000000000000000000000000000000000000000e8b8b0ce"]}

22:13:40:533	1ce0	got 39 bytes
22:13:40:533	1ce0	buf: {"id":6,"jsonrpc":"2.0","result":true}

22:13:40:533	1ce0	parse packet: 38
22:13:40:533	1ce0	new buf size: 0
22:13:43:922	191c	GPU0 t=81C fan=74%, GPU1 t=56C fan=69%, GPU2 t=71C fan=78%, GPU3 t=77C fan=45%
22:13:43:938	191c	em hbt: 0, dm hbt: 0, fm hbt: 15, 
22:13:43:938	191c	watchdog - thread 0, hb time 15
22:13:43:938	191c	watchdog - thread 1, hb time 93
22:13:43:938	191c	watchdog - thread 2, hb time 46
22:13:43:953	191c	watchdog - thread 3, hb time 125
22:13:43:953	191c	watchdog - thread 4, hb time 0
22:13:43:953	191c	watchdog - thread 5, hb time 78
22:13:43:953	191c	watchdog - thread 6, hb time 83921
22:13:43:969	191c	WATCHDOG: GPU 3 hangs in OpenCL call, exit
22:13:43:969	191c	watchdog - thread 7, hb time 83828
22:13:43:969	191c	WATCHDOG: GPU 3 hangs in OpenCL call, exit
22:13:45:168	191c	Restarting OK, exit...

---------------------------------------------------------------------------------

22:13:48:054	1c0c	args: -epool eu1.ethermine.org:4444 -ewal 0x707E939fcF80a2F5F1331e8DF16668bC7393caaB.impMiningRig01 -epsw x -dpool stratum+tcp://dcr.suprnova.cc:3252 -dwal impatronic.impDecred01 -dpsw AmkElCd2NdHU -dcri 30,30,30,30 
22:13:48:061	1c0c	
22:13:48:066	1c0c	ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
22:13:48:071	1c0c	º      Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v9.2      º
22:13:48:076	1c0c	ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
22:13:48:091	1c0c	
22:13:48:308	1c0c	ETH: 1 pool is specified
22:13:48:447	1c0c	Main Ethereum pool is eu1.ethermine.org:4444
22:13:48:462	1c0c	DCR: 1 pool is specified
22:13:48:479	1c0c	Main Decred pool is dcr.suprnova.cc:3252
22:13:49:812	1c0c	OpenCL platform: AMD Accelerated Parallel Processing
22:13:49:820	1c0c	OpenCL initializing...

22:13:49:825	1c0c	AMD Cards available: 4 
22:13:49:830	1c0c	GPU #0: Ellesmere, 4096 MB available, 32 compute units
22:13:49:834	1c0c	GPU #0 recognized as Radeon RX 470/570
22:13:49:838	1c0c	GPU #1: Ellesmere, 4096 MB available, 32 compute units
22:13:49:843	1c0c	GPU #1 recognized as Radeon RX 470/570
22:13:49:847	1c0c	GPU #2: Ellesmere, 8192 MB available, 36 compute units
22:13:49:855	1c0c	GPU #2 recognized as Radeon RX 480/580
22:13:49:860	1c0c	GPU #3: Ellesmere, 8192 MB available, 36 compute units
22:13:49:866	1c0c	GPU #3 recognized as Radeon RX 480/580
22:13:49:870	1c0c	POOL/SOLO version
22:13:49:875	1c0c	b335 
22:13:49:881	1c0c	Platform: Windows
22:13:49:942	1c0c	start building OpenCL program for GPU 0...
22:13:50:574	1c0c	done
22:13:50:782	1c0c	start building OpenCL program for GPU 1...
22:13:51:239	1c0c	done
22:13:51:447	1c0c	start building OpenCL program for GPU 2...
22:13:51:831	1c0c	done
22:13:52:041	1c0c	start building OpenCL program for GPU 3...

and then it hanged in there for an hour till i manually restarted it

[exevior]

I think Claymore did a wonderful job on this one.
At first i did get a decrease from 165Mh to 140-ish with dual ETH-DCR.
Then i played with it and got back up. Seems like the software is becoming more and more advanced, thus "needy"
These settings worked for me:
EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0x3ba6Bec13899d67c4B9c37230bCd49dB822A6b35.minerx -epsw x -dpool stratum+tcp://decred.eu.nicehash.com:3354 -dwal 36PoLAKNUiYdUz22BuKDxBorSp2j1C7G9H.minerx -dpsw x -esm 1 -mode 0 -tt 70 -asm 0

Running 6x RX470 OCd
core voltage -30mv Core 1100MHz Mem clock 1950MHz (Using MSI Afterburner)

[tryshop]

A very unstable situation with windows 10 on version 9.0, 9.2 is even worse. The latest version of Windows can only support the driver 17.1.2. The video cards periodically drop one by one from 28-29 to 19-22mh / s and the next line is restored. As a result, a loss of up to 5% per day on chaotic jumps. Up to 28MHs this is a little overclocking and everything should work fine. I think there is a request to track the work on the driver 17.1.2 and make friendly changes for stable operation.AMD driver 17.1.2 is the last key driver for mining in the development of windows 10 for modified polaris. The rest, above, cause an increase in the work of the "system interrupt" processor. The rest, below, have an increased energy consumption during mining.

[xTommYx]

Whatever improvements Claymore has made, whatever bugs fixed.
My miner use to crash like twice in an hour and sometimes 6 times in an hour.
I even ordered new pci powered risers instead of molex ones. But

Now running stable for more than 2 hours with v9.2! No hardware changes at all.
There is definitely some big fix, atleast for me.

Hashrate has gone stable, no big fluctuations at all on asm mode with dual mining eth+dcr

I am loving this version.
Thank you Claymore once again for such a quick update.

[kostickole92]

Whatever improvements Claymore has made, whatever bugs fixed.
My miner use to crash like twice in an hour and sometimes 6 times in an hour.
I even ordered new pci powered risers instead of molex ones. But

Now running stable for more than 2 hours with v9.2! No hardware changes at all.
There is definitely some big fix, atleast for me.

Hashrate has gone stable, no big fluctuations at all on asm mode with dual mining eth+dcr

I am loving this version.
Thank you Claymore once again for such a quick update.

can u put here all sets for your claymor plz?

[LeonManveli]

Thank you Claymore for your works!!.. but v9.2 can't mine on http://yiimp.ccminer.org when ccminer-2.0-rc3 works perfectly.. may be.. what I do wrong?

[xanx]

I think Claymore did a wonderful job on this one.
At first i did get a decrease from 165Mh to 140-ish with dual ETH-DCR.
Then i played with it and got back up. Seems like the software is becoming more and more advanced, thus "needy"
These settings worked for me:
EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0x3ba6Bec13899d67c4B9c37230bCd49dB822A6b35.minerx -epsw x -dpool stratum+tcp://decred.eu.nicehash.com:3354 -dwal 36PoLAKNUiYdUz22BuKDxBorSp2j1C7G9H.minerx -dpsw x -esm 1 -mode 0 -tt 70 -asm 0

Running 6x RX470 OCd
core voltage -30mv Core 1100MHz Mem clock 1950MHz (Using MSI Afterburner)

any reason as to why you did the temp 70 as the limit>? I currently have 5 rx480's at 1100/2250 and only getting 27.7mhz..anything above 2250 results in share overclock loss

[Noone.Noface]

Thanks Claymore.

[Bojcha]

v9.2:

Possible to add configurable "job timeout"?
Currently job timeout is 10 minutes.  For some coins sometimes job does not coming up more then 10 minutes and miner restarts connection to pool.

[TunerDude007]

Way way more stable for me. Out of my 6 RX 480's one would always jump from 30 to 16mhs. Now it bounces from 30 to 29...so much more stable. I'm also using -asm 0. I haven't tried dual mining just yet with 9.2 but will try.

[golden0707]

@Claymore. Could you add stat option to display number of accepted shared by each gpu ? It will be usefull to find degradated gpu.
BR.

[yoonline]

@Claymore. Could you add stat option to display number of accepted shared by each gpu ? It will be usefull to find degradated gpu.
BR.

++++

[Jamievs]

Thank you Claymore for your works!!.. but v9.2 can't mine on http://yiimp.ccminer.org when ccminer-2.0-rc3 works perfectly.. may be.. what I do wrong?

Same here. Changes to decredpool but now get 100% rejects.

[jumphost404]

I'm having problems trying to duel mine Decred, do I need 5 different decred wallets if I have 5 miners using yiimp.ccminer.org:3252 ?
I have also tried supernova ./ethdcrminer64 -epool eth-eu.dwarfpool.com:8008 -ewal 0xe80ef5824827b3fa046a98b2b9d510dcf7bf4ff4/Rig4 -epsw x -dpool stratum+tcp://dcr.suprnova.cc:3252 -dwal xxx.rig4 -dpsw x
I have set up supernova workers. Only one worker will work I cannot get 2 workers running
Also can I mine alt eth coins with duel mining?

[Teress]

Claymore only display GPU temperatur for GPU 0. I want to see or log temperature for all GPU

How to do so?

Do you have crossfire activated?

Make sure you are NOT using RDP, use teamviewer instead for example

Why not use RDP?

Because bugs exist! It's in the readme , make sure you read it:
It seems RDP uses a virtual display adapter that makes claymore only detect one card for the temp readings

" I see only one card via Remote Desktop Connection.
  It's a problem of RDC, use TeamViewer or some other remote access software.

" -> From the readme

I see all cards and all cards are mining great. Only Claymore show temperature of first GPU0 only. GPUZ, OpenHWmonitor.. read correct info from all cards.
When using VNC I would need to manualy configure resolution, default with no display connected is 640x480. That's why I used RDP where you set resolution only once. On VNC you have to set it each reboot.

[tperalta82]

Claymore only display GPU temperatur for GPU 0. I want to see or log temperature for all GPU

How to do so?

Do you have crossfire activated?

Make sure you are NOT using RDP, use teamviewer instead for example

Why not use RDP?

Because bugs exist! It's in the readme , make sure you read it:
It seems RDP uses a virtual display adapter that makes claymore only detect one card for the temp readings

" I see only one card via Remote Desktop Connection.
  It's a problem of RDC, use TeamViewer or some other remote access software.

" -> From the readme

I see all cards and all cards are mining great. Only Claymore show temperature of first GPU0 only. GPUZ, OpenHWmonitor.. read correct info from all cards.
When using VNC I would need to manualy configure resolution, default with no display connected is 640x480. That's why I used RDP where you set resolution only once. On VNC you have to set it each reboot.

Yes I know, they mine great, everything works just fine, only the temps will come for the first card.
Like I said, just use teamviewer, it just works, VNC is veeery slow

[chup]

This is a general question to all those people dual mining out there - do you really think it is worth it? Don't you think that you are "frying" your cards and that in the long term any gains you make will be lost when you have to replace GPUs and maybe PSUs and other components which are being run way past the limits they were tested for in "gaming" usage scenarios?

When I dual mine I see a LOT more power consumption (obviously) and a lot more heat (obviously) but I see or feel heat in places and on components that I find a lot more worrisome that when I single mine.

I have heard of people who dual mine with new GPUs and then sell them after only a month or two at a 10-20% discount to unsuspecting buyers on Ebay or similar, then they buy new GPUs. That way they avoid the inevitable consequences of overloading GPUs and pass the damage on the someone else. I think that is a shitty thing to do so I just stick to single mining and keep my cards for a long time.

Am I exagerating the effect of dual mining?

My cards are undervolted and underclocked, so You can assume as situation of driving a car with 60 miles per hour without stopping. I don't think that prank throttling and braking in short drives will have longer lasting car than senior driving endless distances with low speed.

[Teress]

Claymore only display GPU temperatur for GPU 0. I want to see or log temperature for all GPU

How to do so?

Do you have crossfire activated?

Make sure you are NOT using RDP, use teamviewer instead for example

Why not use RDP?

Because bugs exist! It's in the readme , make sure you read it:
It seems RDP uses a virtual display adapter that makes claymore only detect one card for the temp readings

" I see only one card via Remote Desktop Connection.
  It's a problem of RDC, use TeamViewer or some other remote access software.

" -> From the readme

I see all cards and all cards are mining great. Only Claymore show temperature of first GPU0 only. GPUZ, OpenHWmonitor.. read correct info from all cards.
When using VNC I would need to manualy configure resolution, default with no display connected is 640x480. That's why I used RDP where you set resolution only once. On VNC you have to set it each reboot.

Yes I know, they mine great, everything works just fine, only the temps will come for the first card.
Like I said, just use teamviewer, it just works, VNC is veeery slow

Strange. Ok, understand, thanks. I use VNC on my second rig, it's not slow, I use also Remotix agent over VNC  from outside net, that's the best combination for me. I don't trust Teamviewer...

[golden0707]

Hi guys ! Correct me if Im wrong. If i see 1100 watt from the wall on my wattmeter , so on 80+ Standard PSU its 1100*0.8=880 power load of PSU. And its good enough for PSUs working conditions (1000Watt Chieftech)?
I mean its about 85% of its full load.

Right ?

[Trimegistus]

Hi guys ! Correct me if Im wrong. If i see 1100 watt from the wall on my wattmeter , so on 80+ Standard PSU its 1100*0.8=880 power load of PSU. And its good enough for PSUs working conditions (1000Watt Chieftech)?
I mean its about 85% of its full load.

Right ?

If you have a 1000W PSU how can you see 1100 at the wall? Something is wrong...

The 80+ standard is a measure of efficiency. No PSU will deliver 100% of its nominal output, 10~20% is lost in heat.

Therefore, a 1000W PSU will only deliver ~800W within a limited range of loads, and not at full load. Got it?

A 1000W PSU will never "suck" 1100w from the wall....