Is it possible to mine ethash with rented hash from nicehash?
Seems like a good profit.
Yes, it's DaggerHashimoto on nicehash. You can't make profit though, all you will effectively be doing is buying Ethereum with Bitcoin. To make profit, there has to be loads of hash and hardly any buyers or you are mining a more profitable coin than the other buyers. I've circled a Bitcoin round so many times with every algorithm with no significant profit and even loss sometimes; running 24/7. When Zcash/Zclassic came out, that was the time to buy; made so much money off that. Put most towards my house deposit in the end.  |
|
|
|
Hi!
Im new to mining and at Multipool i have a hard time to navigate since its auto-switching.
Right now i have rented some hash from nicehash and pointed to.
Scrypt hub.miningpoolhub.com Port 12001
X11 hub.miningpoolhub.com Port 12007.
Both workers is on auto, i can only see the hashing speed from nicehash.
Where do i on hub.miningpoolhub.com check my hashpower and my shares?
I have choosen to auto-exchange into BTC if that matters.
Just trying out for fun right now!
When renting hash, you are best using the 17xxx ports for auto switching. No setup required. |
|
|
|
no difficulty can't lower so bad our profits , there is fake shares and probably something more ... smelling scam , but with unfair and fake reason :"something went wrong"
fuck off i was thinking this pool was good before
You are talking rubbish. Wait until he is awake and he will check the backend. There is useful stats; nothing is hidden: https://zcash.miningpoolhub.com/index.php?page=statistics&action=blocksAs you can see, the past 24 hours have been really bad (mining is luck based). If there was a problem then he usually pays out of his own money (don't know why he bothers with comments like that). When my internet is going slow, I don't start posting on the ISP's forum telling them to f*** off... I wouldn't even expect a refund. it s about monero , i don't want get refund , i want this stable ... and don't see my rig run for nothing ? thats not legit ? i m thinking to take 2 days to mine monero with 1 rig to check real xmr mined ... so sad can't calculate it good and from reading here , i see some people get same problem with zec These stats are legit: https://monero.miningpoolhub.com/index.php?page=statistics&action=blocksThe last 24 hours has been 24% bad luck. You are just going from pool to pool moaning. If you want a stable pool, kindly report issues and get more people to send hash to the pool to decrease the chances of bad luck. |
|
|
|
O.K. Now i use for monero mining sgminer-gm (the same as in multipoolminer). https://github.com/genesismining/sgminer-gm/releasesMy optimization is --rawintensity 512 --gpu-threads 1 -g 2 -w 4 And for feathercoin mining i use nsgminer https://github.com/ghostlander/nsgminer/releases My optimiszation is -g 1 -I 13 -w 64 --thread-concurrency 64 For skein i use cgminer (the same as in multipoolminer) ws next optimizations -I 6 -g 2 -w 256 For ethash algo claymore with next string: -allpools 1 -esm 3 -etha 0 For equihash algo claymore also ws -a 2 param. It is for rx 470 8gb , i think it can be used for all polaris chip based cards/ No more information  P.S. I have some questions about profitability table for ethash algo. Now multipoolminer uses summary profitability for ethash+sia algo, but for me profitability monero ws profitability ethash+sia the same or monero the best, because i have 5x rx470 8gb undervolted cards, and 650W from the wall summary, but for ethash+sia i have 1kW+ from the wall. It means that for profitability for monero 1.0, ethash 1.0 and sia 0.3 - summary profitability for ethash+sia is 1.3 but electricity +50%, so monero is more profitable for 20%  . Maybe for ethash+sia we must have at some coefficient for correction? Because multipoolminer will not switch ethash algo when it profitability down. Sorry for my bad english  Thank you for sharing; will looking out integrating into the next version. Regarding the wattage monitoring, it is coming at some point, maybe not the next version but it's coming. You can tweak it as much as you want though; just put ' * 0.9' etc. in the miner file to decrease the profit by 10%. |
|
|
|
no difficulty can't lower so bad our profits , there is fake shares and probably something more ... smelling scam , but with unfair and fake reason :"something went wrong"
fuck off i was thinking this pool was good before
You are talking rubbish. Wait until he is awake and he will check the backend. There is useful stats; nothing is hidden: https://zcash.miningpoolhub.com/index.php?page=statistics&action=blocksAs you can see, the past 24 hours have been really bad (mining is luck based). If there was a problem then he usually pays out of his own money (don't know why he bothers with comments like that). When my internet is going slow, I don't start posting on the ISP's forum telling them to f*** off... I wouldn't even expect a refund. |
|
|
|
Its been topping the charts for profitability recently on NVIDIA cards, even above zcash.
Decred is also another that is making good profits now as well and should continue for a while, so you may consider that as well.
I would also like to add them for dual mining on MultiPoolMiner. |
|
|
|
Some questions about MultiPoolMiner
I have 5xAMD Rx470 cards for home mining,so:
1. Now i no need CPU mining (no profit but many noise and alectricity).Where i can switch it off? (nvidia tests no need also).When i starts scrypt no additional fields on screen shown, only username question.
2. For Monero mining i use sgminer-gm because it is more profitable for me and use less electricity than claymore, and i use nsgminer for neoscrypt algo (because original sgminer not work with my cards and stops with error message).How i can change it ?
3. No maxcoin mining now, how i can delete it?
I think it will be actual for all users with polaris chip cards, shure.
Can you help me?
In the 'start.bat', take out CPU. To add/remove/edit miners; go to the folder called 'miners'. Next version will have the ability to select miners/algorithms without having to delete them from the folder. Please can you post a link to any miners and/or settings as I would be interested in including them in the next release? |
|
|
|
hi not sure anymore wish log file it is, did not have much time
next time i will post it if problem
for the crash when switch miners it s not a problem with multipoolminer
it also happen, if for example i run zcashminer i close it and run cryptonote, i just get a bleu screen and reboot, same for eth > cryptonote ... it happens with my rx470 and 1 of the 380's (sapphire) the asus 380's is working fine
does not mater if i keep same clock setting or not
for the corrupt file after power cut i had to replace a few files, maybe it was Include.ps1, not sure anymore
the force closing it happen a few time on my 270 ring it s a message in the admin shell, did not find the log, i will post if it s happen again
Thanks for the information. Sounds like your having a lot of problems with your system. Maybe try changing the intensity of Claymore's miners; it may mitigate the BSOD issue. Or remove one of them from for rotation all together. I can't stop the '.ps1' files corrupting because that's an issue with your system corrupting your hard drive; if it's any of the files that I'm writing to disk then let me now. I've changed the way processes are managed in the latest version; it is now effectively like press the 'X' button in the corner. Is the force close problem definitely in the latest version? Cheers. |
|
|
|
maybe you did something wrong with multipoolminer because what i tested ETH, cryptonight dual eth sia.. is working on my 390 470
i can't run it on all my computer because my rx470 ring an an 380's they crash if i change miner (befor or after switch to cryptonight), but stable if they stay on one
the 270 and other 380 where doing fine, except sometime, 380's hang because it start 2 instance of the miner
also notice some files get corrupt after power cut
and sometimes get message to force close a miner, so it s stuck but still mining
My rig is an AMD 290 and AMD 480 and some NVIDIA users tested it before release; can't see the cards being an issue unless clocked. All the the open reported issues were fixed and closed. Is this with the latest version? Please can you post the log and the stats? https://github.com/aaronsace/MultiPoolMiner/issues/Some details as well like: Which miners are not closing? Where is message about force closing? What files are corrupt? |
|
|
|
@aaronsace I see you have added a "Donate" for 10 minutes line to your 2.4.3.2, yet that isn't documented or mentioned anywhere. Care to explain it's intent?
Currently nothing; it's never used. I'll document if I do add it. Most of those options are not used. Yes, I saw it was set to false. My point was that you should document it(once ready) so people know how to set it to true and/or adjust the time. I will do, sorry for the confusion. I will take that line out for now; don't want everyone to start getting paranoid. Any Idea why I would get Unable to connect to remote server on Invoke-WebRequest "http://$($Server):$Port" -UseBasicParsing, not sure what this piece of code is doing excuse my ignorance It's one of the miner api ports; it will say 'localhost' next to it. Either a miner failed or it is being blocked. Unless you think there is a particular miner missing after benchmark then I wouldn't worry. |
|
|
|
@aaronsace I see you have added a "Donate" for 10 minutes line to your 2.4.3.2, yet that isn't documented or mentioned anywhere. Care to explain it's intent?
Currently nothing; it's never used. I'll document if I do add it. Most of those options are not used. Yes, I saw it was set to false. My point was that you should document it(once ready) so people know how to set it to true and/or adjust the time. I will do, sorry for the confusion. I will take that line out for now; don't want everyone to start getting paranoid. |
|
|
|
@aaronsace I see you have added a "Donate" for 10 minutes line to your 2.4.3.2, yet that isn't documented or mentioned anywhere. Care to explain it's intent?
Currently nothing; it's never used. I'll document if I do add it. Most of those options are not used. |
|
|
|
I have been having trouble getting the auto-algo switch to work with the new monero pool is the port 12580? I am using ssl://us-east.cryptonight-hub.miningpoolhub.com:12580 but when the algo is selected im not getting auth. Any help would be appreciated thanks
The port is 12024. Also, you could give MultiPoolMiner a go. Thanks and I've thought about that but Its getting so many flags for viruses that I can't trust it lol It's only the miners that you should be using; most are the exact miners mentioned on MiningPoolHub. Miners get flagged for viruses all the time. You can see the whole script in notepad, it's not doing anything strange. You are best adding an exclusion folder in your virus checker. |
|
|
|
I have been having trouble getting the auto-algo switch to work with the new monero pool is the port 12580? I am using ssl://us-east.cryptonight-hub.miningpoolhub.com:12580 but when the algo is selected im not getting auth. Any help would be appreciated thanks
The port is 12024. Also, you could give MultiPoolMiner a go. |
|
|
|
also i noticed they tried to request a password reset on that pool and my ethereum is lost........... -.- To do a password reset, someone has access to your email password. This usually happens when people use the same password all over the internet. When a site/company is compromised, the list of passwords is used to access other accounts that you may have on the web. Don't use the same passwords and don't store coins in a pool! I'll just give my bank pin to the guy that runs the local pub or, better yet, just skip the bank, I'll give him all my savings to keep behind the counter... |
|
|
|
I'm using auto-exchange.....so I repeat, why are they still being mined on MPH?
If I wanted to multi-pool mine and withdraw/exchange coins myself, I would. Done it for years. I don't want to do that. Hence I use auto-exchange.
If you are exchanging then you should just mine the most profitable. Why are you mining maxcoin? The coins got mined while testing your powershell LMAO Ah, I see. Sure he will fix it soon. He won't have realized that it's still on the api. Some of us have been testing a new version of MultiPoolMiner over at GitHub; it's got all the miners included that were requested now. Edit: Just checked the latest release and it seems to be fine. Are you sure that it's mining it and that it's not just because of the benchmark? Please let me know either way. If you can, please post bugs and suggestions here as to not clutter the forum and track it better: https://github.com/aaronsace/MultiPoolMiner/issues |
|
|
|
I'm using auto-exchange.....so I repeat, why are they still being mined on MPH?
If I wanted to multi-pool mine and withdraw/exchange coins myself, I would. Done it for years. I don't want to do that. Hence I use auto-exchange.
If you are exchanging then you should just mine the most profitable. Why are you mining maxcoin? If nobody wants to trade maxcoin MiningPoolHub can't force them...? |
|
|
|
Why are the maxcoins not going to exchange?
Because bittrex delisted maxcoin. Then why are they still being mined on MPH? You can still mine and withdraw them. The profit looks like it's set to zero so that should stop them being mined by accident on MultiPoolMiner. |
|
|
|
The admin hasn't stole your coins, dumass. He logs on the forum every day, he'll check it when he is not sleeping. Don't spread FUD. https://bitcointalk.org/index.php?topic=472510.0MiningPoolHub has given out so much even when it's not his fault. 5 Eth is hardly anything; as to why you are storing it in a pool is another story (setup up auto withdraw). |
|
|
|
|
Show Posts
