BogdanCo
|
|
January 15, 2017, 11:32:07 AM |
|
I've been mining Zcash for quite long and couple days ago decided to switch some of my miners back to eth. 4 of them has been mining eth before and 2 of them not, all my cards are RX480 8G. On all of them this happens after couple hours One of the cards randomly decides to mine on 7Mhs.. Connect a monitor to the card with the issue... see if it helps.
|
|
|
|
outbreak198x
Newbie
Offline
Activity: 10
Merit: 0
|
|
January 15, 2017, 02:22:20 PM |
|
just a simple line: EthDcrMiner64.exe -epool etc-eu1.nanopool.org:19999 -ewal walletID
virtual memory shows me 49152, because on C:\ i set 32GB on other drive 16GB, tried also with fixed 16GB C:\ only, 32GB C:\ only, and some other settings.
try to add this to your cmdline -mode 1 -allcoins etc if you don't, the miner try to mine ETH for the devfee, hence your error in DAG creation, if you force allcoin etc, only ETC dags will be created. Same...
|
|
|
|
m1n1ngP4d4w4n
Full Member
Offline
Activity: 224
Merit: 100
CryptoLearner
|
|
January 15, 2017, 03:45:39 PM |
|
just a simple line: EthDcrMiner64.exe -epool etc-eu1.nanopool.org:19999 -ewal walletID
virtual memory shows me 49152, because on C:\ i set 32GB on other drive 16GB, tried also with fixed 16GB C:\ only, 32GB C:\ only, and some other settings.
try to add this to your cmdline -mode 1 -allcoins etc if you don't, the miner try to mine ETH for the devfee, hence your error in DAG creation, if you force allcoin etc, only ETC dags will be created. Same... From what i understood ETC/ETH has the same dag size, so you have to mine EXP with low memory GPU's. (didn't knew that about ETC)
|
|
|
|
PovertyByte
|
|
January 15, 2017, 11:32:38 PM |
|
I have a question for RX 470 and 480 users
What power consumption do you guys get with what hash rates?
|
|
|
|
m1n1ngP4d4w4n
Full Member
Offline
Activity: 224
Merit: 100
CryptoLearner
|
|
January 16, 2017, 07:18:11 AM |
|
I have a question for RX 470 and 480 users
What power consumption do you guys get with what hash rates?
Have you read the forum ? there is alot of post already referencing those numbers.
|
|
|
|
atideath
Newbie
Offline
Activity: 1
Merit: 0
|
|
January 16, 2017, 07:38:56 AM |
|
When Claymore release next version of this Dual Miner? It will contain Polaris optimization?
|
|
|
|
Pennywis3
|
|
January 16, 2017, 11:29:27 AM |
|
just a simple line: EthDcrMiner64.exe -epool etc-eu1.nanopool.org:19999 -ewal walletID
virtual memory shows me 49152, because on C:\ i set 32GB on other drive 16GB, tried also with fixed 16GB C:\ only, 32GB C:\ only, and some other settings.
try to add this to your cmdline -mode 1 -allcoins etc if you don't, the miner try to mine ETH for the devfee, hence your error in DAG creation, if you force allcoin etc, only ETC dags will be created. It doesn't work, you get the same DAG error, no matter if they are ETC. Its O.K. atm, when we can mine Zcash, but what happens if ZEC is no longer profitable? All 2GB cards go on Ebay? hehe
|
|
|
|
m1n1ngP4d4w4n
Full Member
Offline
Activity: 224
Merit: 100
CryptoLearner
|
|
January 16, 2017, 12:06:43 PM |
|
just a simple line: EthDcrMiner64.exe -epool etc-eu1.nanopool.org:19999 -ewal walletID
virtual memory shows me 49152, because on C:\ i set 32GB on other drive 16GB, tried also with fixed 16GB C:\ only, 32GB C:\ only, and some other settings.
try to add this to your cmdline -mode 1 -allcoins etc if you don't, the miner try to mine ETH for the devfee, hence your error in DAG creation, if you force allcoin etc, only ETC dags will be created. It doesn't work, you get the same DAG error, no matter if they are ETC. Its O.K. atm, when we can mine Zcash, but what happens if ZEC is no longer profitable? All 2GB cards go on Ebay? hehe Have you saw my previous post ? https://bitcointalk.org/index.php?topic=1433925.msg17513221#msg17513221ETH and ETC got the same DAG size (didn't knew at the time i made the first reply), if you want to mine with 2GB gpu's, mine EXP (Expanse) same algo but DAG is alot smaller and should fit 2GB GPU's so use an EXP pool with for solo EXP mining and it should work.
|
|
|
|
loky4i4
Newbie
Offline
Activity: 55
Merit: 0
|
|
January 16, 2017, 01:25:08 PM |
|
do i need to do something to mine at die hard protocol (ETC)
|
|
|
|
giagge
Legendary
Offline
Activity: 1134
Merit: 1001
|
|
January 19, 2017, 01:02:52 PM |
|
I would ask if claymore is working on a more powerful miner for 1070 gtx. Interested ETH, ETC, and LBRY.
|
|
|
|
Dum3
Member
Offline
Activity: 75
Merit: 10
|
|
January 19, 2017, 03:12:50 PM |
|
any new update for ethereum miner @Claymore?
|
|
|
|
fittsy
|
|
January 19, 2017, 06:16:20 PM |
|
I would ask if claymore is working on a more powerful miner for 1070 gtx. Interested ETH, ETC, and LBRY.
No. The 1070 isn't good at mining those coins. The architecture is wrong. Dagger Hashimoto isn't good for Nvidia. It's better for AMD cards.
|
|
|
|
naeme18720
|
|
January 19, 2017, 09:56:35 PM |
|
Hi
Mined etc and siacoin with 6 rx 470 4gb better that mined only etc???
|
|
|
|
PovertyByte
|
|
January 20, 2017, 03:25:00 AM |
|
I have a question for RX 470 and 480 users
What power consumption do you guys get with what hash rates?
Have you read the forum ? there is alot of post already referencing those numbers. I read plenty of post about hash rates but power draw is not so consistent. Problem when searching these terms even with quotations is it only requires the words to appear anywhere on the page, even if one is in a post and the other is a related link.
|
|
|
|
|
aaronsace
|
|
January 20, 2017, 11:20:38 PM |
|
The admin hasn't stole your coins, dumass. He logs on the forum every day, he'll check it when he is not sleeping. Don't spread FUD. https://bitcointalk.org/index.php?topic=472510.0MiningPoolHub has given out so much even when it's not his fault. 5 Eth is hardly anything; as to why you are storing it in a pool is another story (setup up auto withdraw).
|
|
|
|
24core
|
|
January 21, 2017, 07:52:09 AM |
|
Hi there,
I have just started running five old AMD 7950 and I am getting the following stat's with Windows 10.
Do they look average / good ?
ETH - Total Speed: 62.777 Mh/s, Total Shares: 5, Rejected: 0, Time: 00:06 ETH: GPU0 12.053 Mh/s, GPU1 13.134 Mh/s, GPU2 12.771 Mh/s, GPU3 12.769 Mh/s, GPU 4 12.047 Mh/s DCR - Total Speed: 941.656 Mh/s, Total Shares: 1, Rejected: 0 DCR: GPU0 180.792 Mh/s, GPU1 197.006 Mh/s, GPU2 191.570 Mh/s, GPU3 191.535 Mh/s , GPU4 180.709 Mh/s
|
|
|
|
Dowper
|
|
January 21, 2017, 09:15:49 AM |
|
Hi there,
I have just started running five old AMD 7950 and I am getting the following stat's with Windows 10.
Do they look average / good ?
ETH - Total Speed: 62.777 Mh/s, Total Shares: 5, Rejected: 0, Time: 00:06 ETH: GPU0 12.053 Mh/s, GPU1 13.134 Mh/s, GPU2 12.771 Mh/s, GPU3 12.769 Mh/s, GPU 4 12.047 Mh/s DCR - Total Speed: 941.656 Mh/s, Total Shares: 1, Rejected: 0 DCR: GPU0 180.792 Mh/s, GPU1 197.006 Mh/s, GPU2 191.570 Mh/s, GPU3 191.535 Mh/s , GPU4 180.709 Mh/s
It's pointless to mine ETH with this GPU. Mine Zcash or EXP.
|
|
|
|
lucasan123
|
|
January 21, 2017, 01:34:57 PM |
|
also i noticed they tried to request a password reset on that pool and my ethereum is lost........... -.-
|
|
|
|
aaronsace
|
|
January 21, 2017, 02:44:46 PM Last edit: January 24, 2017, 05:06:11 PM by aaronsace |
|
also i noticed they tried to request a password reset on that pool and my ethereum is lost........... -.- To do a password reset, someone has access to your email password. This usually happens when people use the same password all over the internet. When a site/company is compromised, the list of passwords is used to access other accounts that you may have on the web. Don't use the same passwords and don't store coins in a pool! I'll just give my bank pin to the guy that runs the local pub or, better yet, just skip the bank, I'll give him all my savings to keep behind the counter...
|
|
|
|
|