fredeq
Legendary
Offline
Activity: 1537
Merit: 1005
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 22, 2017, 04:16:23 PM |
|
I have a question for RX 470 and 480 users
What power consumption do you guys get with what hash rates?
Have you read the forum ? there is alot of post already referencing those numbers. I read plenty of post about hash rates but power draw is not so consistent. Problem when searching these terms even with quotations is it only requires the words to appear anywhere on the page, even if one is in a post and the other is a related link. 470 runs around 26@120 480 runs around 29@135 Theoretically its possible to run 470 at 28, but it requires hardcore mem OC and not many cards can handle it 24/7.
|
|
|
|
vapourminer
Legendary
Offline
Activity: 4438
Merit: 3871
what is this "brake pedal" you speak of?
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 22, 2017, 06:06:53 PM |
|
470 runs around 26@120 480 runs around 29@135
Theoretically its possible to run 470 at 28, but it requires hardcore mem OC and not many cards can handle it 24/7.
my powercolor red dragon 470 4 GB single fan does a hair over 29 mhz on eth with the 1750 strap mod. 1200/2100 -75mv. 24/7 stable. no idea of the power draw at the wall though but gpuz says 85 watts for the chip only. it is undervolted and underclocked core wise. need samsung memory is the main thing for the 470 29+ club.
|
|
|
|
dilipnswamy
Newbie
Offline
Activity: 3
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 22, 2017, 11:59:13 PM Last edit: January 23, 2017, 12:34:49 AM by dilipnswamy |
|
Need Help!!! I have z97 Gaming 5 Mobo (with 1300w PSU), Windows 8, Claymore 11 Beta with Crimson 17 latest driver.
I have 6x RX480 8GB GPUs (using Powered PCI raisers) in the Rig but only 5 recognized, but 6th errors out with following message in Windows Device Manager
Device Status: Windows has stopped this device because it has reported problems. (Code 43)
And the 6th one never show up for mining.
NOTE: I did confirmed that GPU and Power raisers are works fine. Also tried swapping GPUs but no help.
I have tried almost all option on disabling unused hardware in CMOS. Started Rig one by one until 6 GPUs.
Still it does not recognize 6 GPUS. ONLY 5 works as of now.
Please help how to make the 6th one working.
|
|
|
|
avirdoz
Legendary
Offline
Activity: 1191
Merit: 1001
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 23, 2017, 01:10:01 AM |
|
Need Help!!! I have z97 Gaming 5 Mobo (with 1300w PSU), Windows 8, Claymore 11 Beta with Crimson 17 latest driver.
I have 6x RX480 8GB GPUs (using Powered PCI raisers) in the Rig but only 5 recognized, but 6th errors out with following message in Windows Device Manager
Device Status: Windows has stopped this device because it has reported problems. (Code 43)
And the 6th one never show up for mining.
NOTE: I did confirmed that GPU and Power raisers are works fine. Also tried swapping GPUs but no help.
I have tried almost all option on disabling unused hardware in CMOS. Started Rig one by one until 6 GPUs.
Still it does not recognize 6 GPUS. ONLY 5 works as of now.
Please help how to make the 6th one working.
Better switch to win10 or try this mod: https://bitcointalk.org/index.php?topic=712228.0
|
|
|
|
fittsy
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 23, 2017, 02:17:48 AM |
|
Need Help!!! I have z97 Gaming 5 Mobo (with 1300w PSU), Windows 8, Claymore 11 Beta with Crimson 17 latest driver.
I have 6x RX480 8GB GPUs (using Powered PCI raisers) in the Rig but only 5 recognized, but 6th errors out with following message in Windows Device Manager
Device Status: Windows has stopped this device because it has reported problems. (Code 43)
And the 6th one never show up for mining.
NOTE: I did confirmed that GPU and Power raisers are works fine. Also tried swapping GPUs but no help.
I have tried almost all option on disabling unused hardware in CMOS. Started Rig one by one until 6 GPUs.
Still it does not recognize 6 GPUS. ONLY 5 works as of now.
Please help how to make the 6th one working.
Google it. You get "error 43" usually because the miner is counting your onboard graphics as a GPU. So 5 gpus + onboard graphics = 6. You need to disable your onboard graphics. This usually resolves error code 43 problems.
|
|
|
|
MinerosYV
Newbie
Offline
Activity: 72
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 23, 2017, 02:31:44 AM |
|
Make them all Gen 1 at the bios plus change the PCE speed to 8x4x4, make sure its set at PEG. Got 7 working no problem, Windows 10 Pro by the way, but all changes are at Bios level. Are you sure a 1300 PSU can handle 6 RX480 plus the mobo? Got 7 r9 390 running with 2 1300.
|
|
|
|
Dowper
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 23, 2017, 11:18:57 AM |
|
Need Help!!! I have z97 Gaming 5 Mobo (with 1300w PSU), Windows 8, Claymore 11 Beta with Crimson 17 latest driver.
I have 6x RX480 8GB GPUs (using Powered PCI raisers) in the Rig but only 5 recognized, but 6th errors out with following message in Windows Device Manager
Device Status: Windows has stopped this device because it has reported problems. (Code 43)
And the 6th one never show up for mining.
NOTE: I did confirmed that GPU and Power raisers are works fine. Also tried swapping GPUs but no help.
I have tried almost all option on disabling unused hardware in CMOS. Started Rig one by one until 6 GPUs.
Still it does not recognize 6 GPUS. ONLY 5 works as of now.
Please help how to make the 6th one working.
Try the mod for 6GPUs, if it doesn't work you will have to install Windows 10.
|
|
|
|
fr4nkthetank
Legendary
Offline
Activity: 2294
Merit: 1182
Now the money is free, and so the people will be
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 24, 2017, 01:58:31 AM |
|
6 rx models work just fine with win7, just install 6gpumod, and put force and rewrite the registry. Maybe it helps too when you install the drivers after DDU to not install HD audio.
|
|
|
|
Dowper
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 24, 2017, 10:08:22 AM |
|
6 rx models work just fine with win7, just install 6gpumod, and put force and rewrite the registry. Maybe it helps too when you install the drivers after DDU to not install HD audio.
Driver version?
|
|
|
|
fr4nkthetank
Legendary
Offline
Activity: 2294
Merit: 1182
Now the money is free, and so the people will be
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 24, 2017, 02:20:31 PM |
|
16.11.4 I believe. But you really need 6GPUmod
|
|
|
|
fittsy
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 24, 2017, 05:12:52 PM |
|
16.11.4 I believe. But you really need 6GPUmod
I've said it before but let me say it again. "Error 43" is usually caused by the onboard graphics card being read as the 6th gpu. 6 GPU mod won't help him. He has to disable his motherboard built in graphics.
|
|
|
|
mataspanar
Newbie
Offline
Activity: 1
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 24, 2017, 07:04:32 PM |
|
HELP... please check bat.file..i want try mining etc+dcr
EthDcrMiner64.exe -epool etc-asia1.nanopool.org:19999 -ewal 0xe488e4817ad6107ecb8d10fd728a83f7cc5bde97 -epsw x -dpool stratum+tcp://dcr.suprnova.cc:2252 -dwal supi834.1 -dpsw x -allpools 1 -allcoins 1
etc running normal..but dcr have a problem..authenticator fail...and share rejected..
|
|
|
|
rawbot
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 24, 2017, 11:07:13 PM |
|
Is it possible to mine monero with claymore? If so how difficult is it?
|
|
|
|
aaronsace
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 24, 2017, 11:10:49 PM Last edit: January 25, 2017, 12:00:56 AM by aaronsace |
|
Is it possible to mine monero with claymore? If so how difficult is it?
Yes, this has all of Claymore's miners: https://github.com/aaronsace/MultiPoolMiner/releasesJust enter your MiningPoolHub.com username. Very simple. HELP... please check bat.file..i want try mining etc+dcr
MultiPoolMiner mines with Claymore Dual miner without the hassle.
|
|
|
|
fr4nkthetank
Legendary
Offline
Activity: 2294
Merit: 1182
Now the money is free, and so the people will be
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 25, 2017, 01:04:33 AM |
|
16.11.4 I believe. But you really need 6GPUmod
I've said it before but let me say it again. "Error 43" is usually caused by the onboard graphics card being read as the 6th gpu. 6 GPU mod won't help him. He has to disable his motherboard built in graphics. Yeah its a good idea to disable onboard graphics. Although mine are still enabled and it works. Error 43 and that yellow triangle I think means the system cannot allocate resources to that device, so it doesnt work properly. so yeah those resources could be taken by onboard graphics, hd audio or whatnot I guess.
|
|
|
|
KNCFUN
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 25, 2017, 01:48:48 AM |
|
How many NVIDIA cards (1070) can you have stable in a windows 10 pc ? ![Huh](https://bitcointalk.org/Smileys/default/huh.gif)
|
WTB working or unstable KNC TITAN cubes.
|
|
|
S.N.U.F.F.
Newbie
Offline
Activity: 34
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 25, 2017, 04:17:54 PM |
|
Guys, I have annoying problem on my testing rig. When I flast rom with new timings, rebooting system and running dual minning- it shows hashrate from previous card settings, now matter how you changing clocks- hashrate stay same(as before flashing). After few reboots it becomes normal for new bios but it very annoying when you trying to find best timings- need to guess it is right numbers or just glitch. Any advice?
|
|
|
|
meeekz
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 25, 2017, 04:36:15 PM Last edit: January 25, 2017, 05:38:25 PM by meeekz |
|
I am only getting 1 RX470 GPU to mine. Not recognizing others. Using: POOL: us1.ethermine.org:4444, WALLET: 0x51A89f33796b4BAab5f8a0356e4B310E5302d8D6.MikaAMD0, PSW: x, ESM: 0, ALLPOOLS: 0 Any help is appreciated
I also tried: EthDcrMiner64.exe -epool us1.ethpool.org:3333 -ewal 0x51A89f33796b4BAab5f8a0356e4B310E5302d8D6 -epsw x -G _t 2
|
|
|
|
meeekz
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 25, 2017, 06:50:08 PM |
|
Fixed.... It was a driver issue
|
|
|
|
lummujaj
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 66
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 25, 2017, 07:33:05 PM Last edit: January 26, 2017, 12:00:04 AM by lummujaj |
|
ive problems in one of my rigs ,
ethdcrminer has stopped working , i tried everything expect formating windows , i downloaded new miner, copy miner from other rigs still the same problem , its something related with windows ,
ive win10
EDIT: ive found that the miner stops when trying to create OPENCL , it fails anc crash , ive reinstalled the drivers (patched one) since ive moded my gpu ... still cannot find the solution
EDIT 2: solved . the rig somehow installed an update, just restored the windows and how working fine , ive permanently disable the windows update since now
|
|
|
|
|