 Show Posts
|
|
Pages: « 1 2 3 [4] 5 6 »
|
|
Your friend has around 600 mh/s and you have about 115.
The variance will be far more noticeable for your rig.
That's why his chart looks stable.
|
|
|
|
is there a way to auto restart EWBF miner if miner or GPU has a problem ? like watchdog for claymore ?
Try this:
:restart
Timeout /t 30
miner --server eu1-zcash.flypool.org --user t1cURHbxrB4xtBNaPH5xLFWE9CvPU5XQcFZ.ew --pass x --port 3333 --fee 0 --eexit 3 --log 1 --pec
ping 127.0.0.1 > nul
goto :restart
|
|
|
|
Not sure about the 1070's but here's what I get with the Aorus 1080ti (just tested to see how far it can go).
So, 80% tdp -100 core +1000 memory (max) gives 39.5 mh/s (however after a few minutes CPU starts to overload with high usage from afterburner. If I close it I'm left with the System process hogging the CPU (a cheap celeron skylake). +600 memory gives 36 mh/s and no CPU overload.
Wonder where the problem is. Too weak CPU?
try 0 core +800 ram even though eth like ram more then anything it needs some core. if core is too low it limits the max hash what miner claymore? if claymore try -ethi 16 in the bat. I will try a rig with a better cpu. to see if I can create your problem I am doing 2 msi aero 1080 ti at 75% tdp 174 core 860 ram 75% fan and getting 38.5 on claymore with a -ethi 16 setting using an intel i3 6100t and cpu usage is 9% I now bumped to 975 ram and cpu usage is now 24% so I would say using a shit cpu is your issue note i did this on win7 more testing weaker cpu and high ram clock = no go. the better the cpu the closer to high ram clock , but in my case it seems that stable memory max is about 860 even with a i3 6100t gives me 38.5 mh. but at 600 memory and a core of 58% it gives me 36.2 Must be the CPU then. -ethi is already set to 16. Your results are similar to what I'm getting. Was just testing it out. Back to LBC for now. Thanks for looking into it. |
|
|
|
|
Not sure about the 1070's but here's what I get with the Aorus 1080ti (just tested to see how far it can go).
So, 80% tdp -100 core +1000 memory (max) gives 39.5 mh/s (however after a few minutes CPU starts to overload with high usage from afterburner. If I close it I'm left with the System process hogging the CPU (a cheap celeron skylake). +600 memory gives 36 mh/s and no CPU overload.
Wonder where the problem is. Too weak CPU?
|
|
|
|
|
amazon.fr sau amazon.de ... vezi pe care e mai ieftin. Livrare fara probleme in RO.
|
|
|
|
|
Nu e nevoie de portofel hardware. Scump si nu e necesar decat daca te pasioneaza suvenirurile.
Poti sa folosesti portofelul oficial al monezii (software). E destul de sigur - pierzi monezile doar daca intra cineva in calculatorul tau si le transfera...
|
|
|
|
Well i just completed a 24hr test run on Yiimp mining DGB directly....
Both Cards are Identical on watercooling....
GP0 mining Yiimp 13minutes pass 24hrs start time mined 259.56636176 DGB $16.16 USD directly to Poloniex
GP1 mining Zpool 13minutes pass 24hrs start time mined 0.00423501 BTC $11.90 USD directly to Coinbase
Both cards are running the same settings....now to find out how much it is to shift the DGB into BTC, then transfer it to my coinbase account, since when i mine ZPool i mine it directly to that wallet. if these fees are less than the difference between $16.16 and $11.90.... it may be more profitable to mine it directly
Poloniex charges: - 0.15% exchange fee (just set a higher price for DGB, the order should get filled within a few hours) - transfer fee BTC to Coinbase - 10000 satoshi ~ $0.28 as of now Made about $160 in BTC in the past 11 days with one 1080ti. If you have the time, it's worth it to do things this way. |
|
|
|
Hello. Got question. Does anyone tested sata 007 risers with rx470/80 cards? like those  im talking about sata smelting problem will it handle with brand psu connector/cable? I'm using these with 480's and never had a problem. Sata cable plugged in directly, no more than 2 risers per cable. The sata cable from the PSU can handle 150W max. The ones that have molex to sata adapter are not too reliable although there have been claims that they work if not overloaded. I have both 006c and 007, no noticeable difference between them. |
|
|
|
Offtopic, but relevant to zpool payouts.
I used miningpoolhub in the past, and switched to zpool recently.
So I am getting these 0.01BTC transactions to my blockchain.info wallet daily.
The other day I bought something worth 400€ and lo and behold blockhain says I have to pay 10€ in transactions fees (!!!!) due to "many small unconsolidated transactions that need to be consolidated for this payment".
I guess its due to those small zpool payments that are trickling in daily.
Anybody here had similar experience? How to prevent such high payment fees?
Use poloniex BTC adress for zpool payments and then pay from there?
Thanks.
Had that issue also. So what I did was set up another wallet to do transactions from. So I mine to one wallet and transfer from it to the other once I hit .2 btc and that seems to work to eliminate the small transactions. Takes a while for the transfer, but since I am doing to myself and not for a transaction time is not so critical. Thanks. So mine to dreaded Poloniex and when satoshis pile-up transfer with minimal fee to blockchain.info? As far as I'm aware Poloniex only charges 10000 satoshi for transfers. Haven't transferred out of there in a while but I just checked and it seems to be holding this low fee. Regarding current best profitability, for my setup Skein is still number one and has been for the past 2 weeks, Lyra2rev follows $2/day shy. LBRY on Nicehash shows ~$8.5/day for my one 1080ti @ 500mh. I must be missing something... |
|
|
|
past few days my 5 x 1080ti rigs are busy mining on LBRY at very high returns, higher than ZEC and Skein -- anyone noticed that?
Hmm...from what see skein (1080ti @ 1000mh) 24h profitability is about $1 over lbry (@503mh - ccminerAlexis78 seems to be better on this algo as well, by about 30mh compared to the regular ccminer). Thanks for the tip. Will be keeping an eye on it. May I ask if you're using different software? Blake2s algo seems to be close in profitability as well. |
|
|
|
Miningpoolhub. I just downloaded nemosminer with alexis 78. Same result as my setup from before, will test for stability until morning. You should clean up with all those ti's coming your way  EDIT: replied to your pm btw |
|
|
|
Hey what software is that your using to view your miner status?
Just the pool stats for my worker. Nothing fancy  1. I use the same software as you 2. I don't do auto exchange. I send the coins to Poloniex. Why? DGB price went up a lot today (it may go down tomorrow  ). I hold the coins until I see a better chance at a profit and sell. Simple, you just have to be on top of it. 3. Event without chasing the price, as of now, you should be making this with 2 x 1080ti mining skein and sending to an exchange + converting once a day to BTC: http://whattomine.com/coins/114-dgb-skein?utf8=%E2%9C%93&hr=2000&p=250.0&fee=5.0&cost=0.0&hcost=0.0&commit=Calculate Maybe less (there is a dump in progress as I'm typing  ) That's about it  |
|
|
|
You guys are getting ridiculous prices as far as us europeans are concerned. Over here you can't even touch a 1080 ti without at least $850 not to mention other vital components like a good mobo. Might consider getting back to the US. Any of you want to adopt a 30 year old? On another note, is it me or is skein ridiculously profitable right now? My one 1080 ti is about $2 shy in earnings/day than a 4 x amd rig. DGB price climbing as we speak. |
|
|
|
So...using ccminer tpruvot 2.0 cuda 8.0 in which I placed ccminerAlexis78.exe. 1080 ti, getting a hair over 1000mh/s. (Should there be any issues here I'm not considering? Compatibility and so on?)
I point it to miningpoolhub, no autoexchange (i get the coins in poloniex and convert them there).
1st day ok, second day around 15% over what calculator says, 3rd day going down, 4th day even lower (about 10% lower than whattomine).
So is the fluctuation in coins produced/day that large? Is the diff changing that fast? Bad pool?
It seems I'm missing something here...
What is your actual wallet numbers? The reason i ask this is because according to the page of the mining pool i was using zpool.ca it was estimating im going to make like 28-30usd/day worth of BTC with my pair of GTX1080ti's... but the actual BTC i made in 14 hours mining was on par to only make $11/day... so the estimation vs actual earnings are WAY OFF>...... and i was bouncing between 900-1000Mh/s on each card... so 1800-2000Mh/s also could you give your input on why you went the no autoexchange route? just trying to learn from all of this... Im currently using JAXX wallet with auto into BTC.... I try to exchange the coins myself. If you hold on to them a little bit you can get more BTC for them. DGB price went up the past day from 1087 sats to 1460 and climbing. When I sell all the DGB I made in one day now, I get more btc. Makes sense to go this route. You can even hold for longer if you think price will go up more. The pool still shows lower numbers but within $1/day difference. You should be getting whatever whattomine says for your hashrate. This is very close to what I'm getting: http://whattomine.com/coins/114-dgb-skein?utf8=%E2%9C%93&hr=1000.0&p=250.0&fee=5&cost=0.0&hcost=0.0&commit=CalculateWhen i go to Zpool.ca and look under benchmarks the number on there is always lower than what the miner reports inside the window (1980-2020Mh/s)... on zpool.ca under benchmarks, its showing 1898.63Mh/s for Skein Pools calculate your hashrate based on submitted shares. The 24/48 hours earnings should match closely what you're supposed to get + there are more rejects with skein (about 5%) due to very short block time. Got 518 DGB for yesterday with one 1080ti. That's about $19 as of now. I'm getting $20 with 4 x 480's. Strange times in the mining game http://imgur.com/a/lP5AJ |
|
|
|
So...using ccminer tpruvot 2.0 cuda 8.0 in which I placed ccminerAlexis78.exe. 1080 ti, getting a hair over 1000mh/s. (Should there be any issues here I'm not considering? Compatibility and so on?)
I point it to miningpoolhub, no autoexchange (i get the coins in poloniex and convert them there).
1st day ok, second day around 15% over what calculator says, 3rd day going down, 4th day even lower (about 10% lower than whattomine).
So is the fluctuation in coins produced/day that large? Is the diff changing that fast? Bad pool?
It seems I'm missing something here...
What is your actual wallet numbers? The reason i ask this is because according to the page of the mining pool i was using zpool.ca it was estimating im going to make like 28-30usd/day worth of BTC with my pair of GTX1080ti's... but the actual BTC i made in 14 hours mining was on par to only make $11/day... so the estimation vs actual earnings are WAY OFF>...... and i was bouncing between 900-1000Mh/s on each card... so 1800-2000Mh/s also could you give your input on why you went the no autoexchange route? just trying to learn from all of this... Im currently using JAXX wallet with auto into BTC.... I try to exchange the coins myself. If you hold on to them a little bit you can get more BTC for them. DGB price went up the past day from 1087 sats to 1460 and climbing. When I sell all the DGB I made in one day now, I get more btc. Makes sense to go this route. You can even hold for longer if you think price will go up more. The pool still shows lower numbers but within $1/day difference. You should be getting whatever whattomine says for your hashrate. This is very close to what I'm getting: http://whattomine.com/coins/114-dgb-skein?utf8=%E2%9C%93&hr=1000.0&p=250.0&fee=5&cost=0.0&hcost=0.0&commit=Calculate |
|
|
|
|
I agree, never had any losses, but some miners depend on that payout coming as scheduled and when you add a price drop in ETH (as it was the case during the last outage) things can get ugly.
I really hope they're not using the coins to trade.
|
|
|
|
|
So...using ccminer tpruvot 2.0 cuda 8.0 in which I placed ccminerAlexis78.exe. 1080 ti, getting a hair over 1000mh/s. (Should there be any issues here I'm not considering? Compatibility and so on?)
I point it to miningpoolhub, no autoexchange (i get the coins in poloniex and convert them there).
1st day ok, second day around 15% over what calculator says, 3rd day going down, 4th day even lower (about 10% lower than whattomine).
So is the fluctuation in coins produced/day that large? Is the diff changing that fast? Bad pool?
It seems I'm missing something here...
|
|
|
|
|
They're either fucking with us or they have no idea what they're doing. I haven't heard of any major pool having these issues.
|
|
|
|
Mda..tva-u masii. Ziceam ca sunt mai avantajati astia din sua totusi de parca nu ar avea destule avantaje. Cand cauti placi arunca un ochi si pe amazonurile din europa .fr .de .it . Am luat 2 placi din Franta si au ajuns fara probleme. Nu e nimic de platit in plus doar ca trebuie sa le astepti un pic mai mult (1-2 saptamani) + cost transport vreo 15 - 20 euro. Cateodata le scoti mai ieftin asa. RX nu se prea mai gaseste nicaieri. Am luat eu una resigilata de la pc garage acum vreo 2 saptamani pe la 1100 ron... De asta am zis sa iau nvidia. Ai putea sa gasesti un gtx 1070. Din cate observ se muta multi pe nvidia. Acum fac $13/zi ca a crescut pretul la bitcoin  |
|
|
|
Nu stiu ce sa zic. Eu minez doar eth si nu am prea multe probleme. Mi-am dat seama ca am crashuri atunci cand folosec rig-ul sa stau pe net sau sa rulez programe. Daca il las in pace merge fara probleme. Cred ca am procesorul prea slab si ram ca putin.
Poate nu le place overclock...se intampla. Ai putea sa incerci sa modifici biosurile si apoi sa le lasi memoria stoc si gpu clock la 1266. Obtii mai mult asa decat obtii acum cu bios original + overclock. Pe la vreo 28 eth.
In fine, mi-am luat un Gigabyte Aorus Extreme 1080ti. E un animal de placa. Am pus-o pe skein si merge bine. ROI in 3 luni la preturile de acum.
Ziceai ca te gandesti sa mai cumperi placi...ar fi o optiune buna desi e cam scumpa la noi.
4000 ron bucata ?! fuck me )) aia chiar e scumpa .. dar acuma sa vorbim de hash rate ) ia uimeste-ma sa vedem daca se merita Eu nu stau pe miner , acel calculator mineaza doar :-/ , la capitolul rami are 8 gb , si procesorul nu e ceva strong dar e ultima generatie un intel pentium kaby lake socket 1151 :-/ Nici eu nu stau pe el dar mai verificam pool sau exchage sau vreun program de bios si pica. Acum merge linistit. E cam cald pe aici totusi... vreo 800h/s zec. 1000mh/s skein - la pretul DGB de acum asta inseamna cam $10 $11 pe zi. Am dat $907 (3699ron) pe ea. Pe eth nu e buna - vreo 33mh. Sunt scumpe rau la noi placile astea. In SUA le iei cu cel putin 20% mai ieftin. |
|
|
|
|
