No I just love tutorials like this "Please use static address. Save & apply."
I hate tutorials in general  |
|
|
|
I got screwed up also with preorders: $12K AMT miners Josh that son of the bitch. $4500 BFL fucked me over. $12K Cointerra with pre-orders late..and not the speed that they promised. How many of these American Junky companies are outhere? And No one seems to not be able to stop them! Bottom line none of the American mining companies are trust worthy at this point. opieum shouldn't you be kissing some AMT ass in the "official thread"? people are sick of the excuses you make for AMT. Every time someone has something negative to say (rightly so) in regards to AMT you have some excuse for their atrocious behavior. i find it laughable you think all your ass kissing is going to get you a "working" miner. Their is no defending people who flat out lie and misrepresent their entire company model. I bet I get a response from you in the next 5 minutes. You sit at your computer ALL day waiting for anyone to dare say something bad about these jerks. It is not opium only 95% percent of amt customers just hope for a miracle to happen As we all know miracles do happen on occasions . But whatever happens they have lost their money a long time ago. Now they are losigig their dignity also.  That is why amt thread is so big and no one is fucked..... However I do hope that there are some guy's with dignity left and they will do whatever it takes to put Zipkin ass to jail. It is not abut the money anymore.... |
|
|
|
Thanks for answering the question, loshia I am not above giving credit where credit is due. I am asking because I have my own curiosity as well in this. AMT is not the only miner I own. And getting some other options is nice. Thanks again for the reply.
No seriously pay attention to amt heatsink and fans. Look at 2good review. Do whatever it takes to make poserkoto Zipkin use same or equal heatsinks and fans First step for boards to work at all and to be overclocked |
|
|
|
So out of curiosity the numbers achieved what settings were needed to get those?
What settings were required...and can they be sustained without burning out?
And are they recommended?
Welcome contributor, To contribute to your question first thing https://bitcointalk.org/index.php?topic=569769.msg6597849#msg6597849So you will need a fire man arround like usual with amt crap  Now if you are brave you will need 270 clock and 1050 mv whatever this means to you oh yeah and 40 amps at 12 volts.are your two higher degrees enough for this info?. If not look at cgminer screen if it is not helping you Zipkin poserkoto will explain for sure. When time comes of course it is a matter of weeks just a few more Ask for your money poserkoto Zipkin is gona deliver crap as always If you Contribute this info to amt thread I will own you |
|
|
|
Thanks loshia for your advice I HATE U ALL  The only thing was switch from static address to DHCP client then use Advanced IP Scan and go back The Cgminer API Log [Firmware Version] => 20140329
cgminer: 4_1_0_5ed45a0
Reply was 'STATUS=S,When=1399369448,Code=70,Msg=CGMiner stats,Description=cgminer 4.2.3|STATS=0,ID=HEXb0,Enabled=N,Status=Alive,Elapsed=1066,MHS 5s=0.000,MHS av=0.000,Hardware Errors=0,Hardware Errors%=0.0000,USB Read Errors=0,USB Write Errors=0,USB Reset Count=0,Last Share Time=0,Chip Count=16,Frequency=540,Core Voltage=900,PIC Voltage Readings=840,Chip1 Nonces=0,Chip1 Dupes=0,Chip2 Nonces=0,Chip2 Dupes=0,Chip3 Nonces=0,Chip3 Dupes=0,Chip4 Nonces=0,Chip4 Dupes=0,Chip5 Nonces=0,Chip5 Dupes=0,Chip6 Nonces=0,Chip6 Dupes=0,Chip7 Nonces=0,Chip7 Dupes=0,Chip8 Nonces=0,Chip8 Dupes=0,Chip9 Nonces=0,Chip9 Dupes=0,Chip10 Nonces=0,Chip10 Dupes=0,Chip11 Nonces=0,Chip11 Dupes=0,Chip12 Nonces=0,Chip12 Dupes=0,Chip13 Nonces=0,Chip13 Dupes=0,Chip14 Nonces=0,Chip14 Dupes=0,Chip15 Nonces=0,Chip15 Dupes=0,Chip16 Nonces=0,Chip16 Dupes=0|STATS=1,ID=HEXb1,Enabled=Y,Status=Alive,Elapsed=1066,MHS 5s=50.31G,MHS av=52.85G,Hardware Errors=0,Hardware Errors%=0.0000,USB Read Errors=0,USB Write Errors=0,USB Reset Count=0,Last Share Time=1399369442,Chip Count=16,Frequency=540,Core Voltage=900,PIC Voltage Readings=900,Chip1 Nonces=689,Chip1 Dupes=12,Chip2 Nonces=797,Chip2 Dupes=3,Chip3 Nonces=811,Chip3 Dupes=5,Chip4 Nonces=877,Chip4 Dupes=9,Chip5 Nonces=807,Chip5 Dupes=13,Chip6 Nonces=787,Chip6 Dupes=7,Chip7 Nonces=729,Chip7 Dupes=14,Chip8 Nonces=837,Chip8 Dupes=8,Chip9 Nonces=849,Chip9 Dupes=1,Chip10 Nonces=836,Chip10 Dupes=10,Chip11 Nonces=806,Chip11 Dupes=4,Chip12 Nonces=831,Chip12 Dupes=5,Chip13 Nonces=906,Chip13 Dupes=15,Chip14 Nonces=820,Chip14 Dupes=11,Chip15 Nonces=861,Chip15 Dupes=17,Chip16 Nonces=876,Chip16 Dupes=8|STATS=2,ID=HEXb2,Enabled=Y,Status=Alive,Elapsed=1066,MHS 5s=65.09G,MHS av=52.98G,Hardware Errors=0,Hardware Errors%=0.0000,USB Read Errors=1,USB Write Errors=0,USB Reset Count=0,Last Share Time=1399369434,Chip Count=16,Frequency=540,Core Voltage=900,PIC Voltage Readings=904,Chip1 Nonces=811,Chip1 Dupes=9,Chip2 Nonces=872,Chip2 Dupes=20,Chip3 Nonces=785,Chip3 Dupes=38,Chip4 Nonces=825,Chip4 Dupes=24,Chip5 Nonces=810,Chip5 Dupes=23,Chip6 Nonces=817,Chip6 Dupes=13,Chip7 Nonces=795,Chip7 Dupes=6,Chip8 Nonces=804,Chip8 Dupes=17,Chip9 Nonces=795,Chip9 Dupes=30,Chip10 Nonces=824,Chip10 Dupes=18,Chip11 Nonces=801,Chip11 Dupes=8,Chip12 Nonces=797,Chip12 Dupes=27,Chip13 Nonces=851,Chip13 Dupes=24,Chip14 Nonces=784,Chip14 Dupes=13,Chip15 Nonces=835,Chip15 Dupes=32,Chip16 Nonces=870,Chip16 Dupes=14|STATS=3,ID=POOL0,Elapsed=1066,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,Pool Calls=0,Pool Attempts=0,Pool Wait=0.000000,Pool Max=0.000000,Pool Min=99999999.000000,Pool Av=0.000000,Work Had Roll Time=false,Work Can Roll=false,Work Had Expire=false,Work Roll Time=0,Work Diff=64.00000000,Min Diff=2.00000000,Max Diff=64.00000000,Min Diff Count=23,Max Diff Count=897,Times Sent=742,Bytes Sent=80624,Times Recv=796,Bytes Recv=83304,Net Bytes Sent=80624,Net Bytes Recv=83304|'
[STATUS] =>
(
[STATUS] => S
[When] => 1399369448
[Code] => 70
[Msg] => CGMiner stats
[Description] => cgminer 4.2.3
)
[STATS0] =>
(
[STATS] => 0
[ID] => HEXb0
[Enabled] => N
[Status] => Alive
[Elapsed] => 1066
[MHS 5s] => 0.000
[MHS av] => 0.000
[Hardware Errors] => 0
[Hardware Errors%] => 0.0000
[USB Read Errors] => 0
[USB Write Errors] => 0
[USB Reset Count] => 0
[Last Share Time] => 0
[Chip Count] => 16
[Frequency] => 540
[Core Voltage] => 900
[PIC Voltage Readings] => 840
[Chip1 Nonces] => 0
[Chip1 Dupes] => 0
[Chip2 Nonces] => 0
[Chip2 Dupes] => 0
[Chip3 Nonces] => 0
[Chip3 Dupes] => 0
[Chip4 Nonces] => 0
[Chip4 Dupes] => 0
[Chip5 Nonces] => 0
[Chip5 Dupes] => 0
[Chip6 Nonces] => 0
[Chip6 Dupes] => 0
[Chip7 Nonces] => 0
[Chip7 Dupes] => 0
[Chip8 Nonces] => 0
[Chip8 Dupes] => 0
[Chip9 Nonces] => 0
[Chip9 Dupes] => 0
[Chip10 Nonces] => 0
[Chip10 Dupes] => 0
[Chip11 Nonces] => 0
[Chip11 Dupes] => 0
[Chip12 Nonces] => 0
[Chip12 Dupes] => 0
[Chip13 Nonces] => 0
[Chip13 Dupes] => 0
[Chip14 Nonces] => 0
[Chip14 Dupes] => 0
[Chip15 Nonces] => 0
[Chip15 Dupes] => 0
[Chip16 Nonces] => 0
[Chip16 Dupes] => 0
)
[STATS1] =>
(
[STATS] => 1
[ID] => HEXb1
[Enabled] => Y
[Status] => Alive
[Elapsed] => 1066
[MHS 5s] => 50.31G
[MHS av] => 52.85G
[Hardware Errors] => 0
[Hardware Errors%] => 0.0000
[USB Read Errors] => 0
[USB Write Errors] => 0
[USB Reset Count] => 0
[Last Share Time] => 1399369442
[Chip Count] => 16
[Frequency] => 540
[Core Voltage] => 900
[PIC Voltage Readings] => 900
[Chip1 Nonces] => 689
[Chip1 Dupes] => 12
[Chip2 Nonces] => 797
[Chip2 Dupes] => 3
[Chip3 Nonces] => 811
[Chip3 Dupes] => 5
[Chip4 Nonces] => 877
[Chip4 Dupes] => 9
[Chip5 Nonces] => 807
[Chip5 Dupes] => 13
[Chip6 Nonces] => 787
[Chip6 Dupes] => 7
[Chip7 Nonces] => 729
[Chip7 Dupes] => 14
[Chip8 Nonces] => 837
[Chip8 Dupes] => 8
[Chip9 Nonces] => 849
[Chip9 Dupes] => 1
[Chip10 Nonces] => 836
[Chip10 Dupes] => 10
[Chip11 Nonces] => 806
[Chip11 Dupes] => 4
[Chip12 Nonces] => 831
[Chip12 Dupes] => 5
[Chip13 Nonces] => 906
[Chip13 Dupes] => 15
[Chip14 Nonces] => 820
[Chip14 Dupes] => 11
[Chip15 Nonces] => 861
[Chip15 Dupes] => 17
[Chip16 Nonces] => 876
[Chip16 Dupes] => 8
)
[STATS2] =>
(
[STATS] => 2
[ID] => HEXb2
[Enabled] => Y
[Status] => Alive
[Elapsed] => 1066
[MHS 5s] => 65.09G
[MHS av] => 52.98G
[Hardware Errors] => 0
[Hardware Errors%] => 0.0000
[USB Read Errors] => 1
[USB Write Errors] => 0
[USB Reset Count] => 0
[Last Share Time] => 1399369434
[Chip Count] => 16
[Frequency] => 540
[Core Voltage] => 900
[PIC Voltage Readings] => 904
[Chip1 Nonces] => 811
[Chip1 Dupes] => 9
[Chip2 Nonces] => 872
[Chip2 Dupes] => 20
[Chip3 Nonces] => 785
[Chip3 Dupes] => 38
[Chip4 Nonces] => 825
[Chip4 Dupes] => 24
[Chip5 Nonces] => 810
[Chip5 Dupes] => 23
[Chip6 Nonces] => 817
[Chip6 Dupes] => 13
[Chip7 Nonces] => 795
[Chip7 Dupes] => 6
[Chip8 Nonces] => 804
[Chip8 Dupes] => 17
[Chip9 Nonces] => 795
[Chip9 Dupes] => 30
[Chip10 Nonces] => 824
[Chip10 Dupes] => 18
[Chip11 Nonces] => 801
[Chip11 Dupes] => 8
[Chip12 Nonces] => 797
[Chip12 Dupes] => 27
[Chip13 Nonces] => 851
[Chip13 Dupes] => 24
[Chip14 Nonces] => 784
[Chip14 Dupes] => 13
[Chip15 Nonces] => 835
[Chip15 Dupes] => 32
[Chip16 Nonces] => 870
[Chip16 Dupes] => 14
)
[STATS3] =>
(
[STATS] => 3
[ID] => POOL0
[Elapsed] => 1066
[Calls] => 0
[Wait] => 0.000000
[Max] => 0.000000
[Min] => 99999999.000000
[Pool Calls] => 0
[Pool Attempts] => 0
[Pool Wait] => 0.000000
[Pool Max] => 0.000000
[Pool Min] => 99999999.000000
[Pool Av] => 0.000000
[Work Had Roll Time] => false
[Work Can Roll] => false
[Work Had Expire] => false
[Work Roll Time] => 0
[Work Diff] => 64.00000000
[Min Diff] => 2.00000000
[Max Diff] => 64.00000000
[Min Diff Count] => 23
[Max Diff Count] => 897
[Times Sent] => 742
[Bytes Sent] => 80624
[Times Recv] => 796
[Bytes Recv] => 83304
[Net Bytes Sent] => 80624
[Net Bytes Recv] => 83304
)
[/code] Welcome dude Are you punishing your self with that dhcp crap I hate you |
|
|
|
Just measured the power draw at the wall (240V) for 4 x Technobit HEX8A1 - 260GHs Coincraft A1 units: Pictures can be found here: http://imgur.com/a/mRbMZ#4w7cdKp1730W = ~1000GHs 1730W / 4 = ~433W each (250GHs) 0: HEX8 0 : 270 1000/1009mV | 777.0G / 262.8Gh/s
1: HEX8 1 : 270 1000/1006mV | 74.51G / 262.9Gh/s
2: HEX8 2 : 270 1000/1006mV | 354.7G / 255.4Gh/s
3: HEX8 3 : 270 1000/ 999mV | 266.6G / 275.5Gh/s How the heck is that possible? That is overclocked at 1v, I assume, yes? Consuming 1.7W/GH... That would cost me over $5000 a year, just to run it! In addition to the cost of the unit. (Just thinking out-loud, observations, not complaining.) Where the heck did you find a 1800W PSU? No shit isawhim No seriously I will keep my promise and stop to "contribute" to amt thread anymore. poserkoto Zipkin deleted my post from amt thread of course. Opium2 will take care of it In general you will be able to get 1.2 the from 5 boards Technobit originals with real heatsinks. You need just a little bit of over clocking We discussed so called psu issue and grounding if your remember? Back to your questions yo are needing about 30-35 amps per board at 12 v to get 1.2 t the from 5 boards As we know poserkoto Zipkin will not ship you six boards If I were you I would split my setup over two psu's with two tplinks You are good with numbers so you are the one to decide. I will strongly suggest 1. To ask for refund from poserkoto Zipkin 2. Or eventually if you happen to get someday Technobit boards without amt engendering touch To run them in more relax manner on two psu's Yeah an prepare about 700 usd for psu just in case |
|
|
|
Hi my Cgminer API Log show [Firmware Version] => 20140329 cgminer: 4_1_0_5ed45a0 Socket connect failed: Connection refused Cgminer Configuration is set to default and the System Log show some No such file or directory errors  Mon May 5 12:59:57 2014 daemon.err udevd[1310]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv usb:v04D8p000Bd0100dc02dsc00dp00ic02isc02ip01in00': No such file or directory
Mon May 5 12:59:57 2014 kern.info kernel: [ 189.250000] usb 1-1.3: USB disconnect, device number 20
Mon May 5 12:59:57 2014 kern.info kernel: [ 189.500000] usb 1-1.3: new full-speed USB device number 22 using ehci-platform
Mon May 5 12:59:57 2014 daemon.err udevd[1345]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv usb:v04D8p000Bd0100dc02dsc00dp00ic0Aisc00ip00in01': No such file or directory
Mon May 5 12:59:57 2014 daemon.err udevd[1344]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv usb:v04D8p000Bd0100dc02dsc00dp00ic02isc02ip01in00': No such file or directory
Mon May 5 13:00:01 2014 cron.info crond[564]: crond: USER root pid 1356 cmd /usr/bin/cgminer-monitor.sh
Mon May 5 13:00:17 2014 kern.info kernel: [ 209.220000] usb 1-1.2: USB disconnect, device number 21
Mon May 5 13:00:17 2014 kern.info kernel: [ 209.480000] usb 1-1.2: new full-speed USB device number 23 using ehci-platform
Mon May 5 13:00:17 2014 daemon.err udevd[1396]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv usb:v04D8p000Bd0100dc02dsc00dp00ic0Aisc00ip00in01': No such file or directory
Mon May 5 13:00:17 2014 daemon.err udevd[1395]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv usb:v04D8p000Bd0100dc02dsc00dp00ic02isc02ip01in00': No such file or directory
Mon May 5 13:00:17 2014 kern.info kernel: [ 209.730000] usb 1-1.3: USB disconnect, device number 22 Thanks for your help Put a hub between tplink and board Udev errors are harmless And check if your board has 12 v power also And paste Lsusb output pls |
|
|
|
|
Just to let you know guys today and tomorrow are a national holidays in Bulgaria
|
|
|
|
So wait..
The lawyers that are sueing AMT are in the actually in the office building next door to them? That's almost too brilliant. ROFL! Round up all your pissed off customers in a class action suit that you helped set up and take it to a federal level. And wasn't this lenell guy praising their name and rooting for AMT for a good while?
Hiding tax charges is what Zipkin is scared of |
|
|
|
Since they are sending me back the miner, I will have my technical guys look at it again. For some reason only half the boards work. In order to make it easier on us, I will try to just ask for the parts I need if that is a possibility. The RasPi works, its just only half the boards work. Either its the cables or the backplane that was damaged in shipping. I will just not worry about the case if I can get it to hash at 1.2Th/s with support. Thank You.
I am wandering how much your technical guys charge you? I am wandering why you are continue to loose money? I am wandering when you realize that the chance to receive crap again is almost 100% They are my staff, cost is free. I am trying to work it out with AMT and become a "nice customer" if they will allow it. Ok dude it is your decision however you are loosing time of your stuff and you are paying for it Ask for Technobit boards if you can the chance to get it working is bigger. Hover AMT engineering touch can be deadly for the boards |
|
|
|
Folks
Let me clarify two things
1. As i said i will not stop you can ignore me
2. If you ever happen to get original hex8 board + real heatsink + real assambly i can assure you that you can count on me in terms of help abut technicall stuff
BUT once again Poserkoto Zipkin will not deliver this board to you. If he does it will be to a few blessed ones. So do not count on it all.
Good luck to all of you who still do hope
What are your qualifications to do assembly? What if we send you our bad AMT boards, can you assemble and test them on the technobit boards? Did you checked technobit thread there is my reply you can check it again if you want. |
|
|
|
Hello,
A bunch of AMT customers have received AMT systems that are non-working.
Would it be possible for us to send our boards to you to be re-assembled into TechnoBit boards?
You will just have to remove the surface mounted A1 chips.
Is this something that is viable?
All of the AMT customers execpt melbro did recive a crap. not a bunch all exept one! Are you ready to pay shiping back and fourth + 1month delay + service + pcb cost? If yes then somone can comment if it is possible at at in technical terms Besides you do not know if chips are working at all that is noncence The best aproch will be to order populated board without the chips and do it localy. Nonworking chip in the beginning of the chain can make all the rest not to work And finaly cheaper will be just to order real fuly populated board which is working fantastic |
|
|
|
Sorry guys, AMT is gone. Call the office next door, they all moved out. Ran away with the money when the heat started to come down on them from the police.
Poserkoto Zipkin will not be able to run forever. it is a matter of time for justice to come He will pay for his actions ...... |
|
|
|
It's interesting but I see bitmine having alot of the same issues AMT has been having. Altho it seems less so. Refunds issues, delivery issues, all of the same. Like I said....seems like anything/anyone using A1's designs is having a ton of issues. Companies using other chips seem to be ok in terms of delivery. Something worth noting if you are looking for vendors. Just seeing a common thread here with the hardware is all. There is this race for a 28nm process, but at the same time with all the problems, it almost seems like the stable and already mature 55nm process or 40nm chips based solutions are better at this point to go with. They work they are stable....and most of all they are shipping and largely on time.
Realy My technobit boards A1 are working non stop. And same is happening to other A1 hex8/hex4 technobit clients So do not speak bulshit please. You can always asume that everyone has issues but facts are different |
|
|
|
Great news! As promised I called the police on these guys within 24 hours of my demand email. The Lower Merion Police said because the amount stolen from me was enough to press charges against AMT miners. Everyone who wants to file charges go to your local police stations, and Lower Merion township will follow up on the charges you press at your local police stations.
Lower Merion? Anyway, what exactly did you tell the police? That you bought something over $X,XXX and the company is not delivering the item? That discussion is probably best had via PMs honestly. Why play your hand publicly. To damage your pr efforts |
|
|
|
Before Opieum showed up here with his overload of optimism, people were bitching about not hearing back for MONTHS. This is nothing new.
AMT has been giving customers the shaft since late last year.
But remain calm, because Opieum says so.
I have an idea. Stop riding AMT's dick because they are giving you SOME form of help. They are fucking over the rest of the community while they help you out with your 1 miner.
His ass will heart badly but I guess Zipkin dick is like Chinese one. It is so small that one do not feel the penetration. But once it is in there it hurts and suddenly you realize how badly you are fucked afterwards The funny part that he got his crap from zipkin hands and is still refusing to admit it |
|
|
|
|
It is quite simple the crap is not working so Zipkin has no move. He is late + lying for last three months or so.
What to say next week? No way. If he admits that he is not able to deliver then he has to refund you which is not his style. Probably he is silently hoping that this will just go buy and you will just say fuck him I lost.
But he is not evaluating the fact that you spend 6-20k so it is quite different compared to bfl
|
|
|
|
There is one in melbro hands Do. NOt bash at Zipkin dude |
|
|
|
|
Show Posts
