.....and start staking for free coins  How does this staking thing work? Do i need some special settings to do it? You just have to open your wallet Do I need to keep coins in it or does it work even if it is empty? You need to have coins in it to stake OK, thanks for the info. Is the reward proportional to the amount of coins in the wallet? I dont know. I have looked at it and I think that if you have a small amount of coins then maybe you dont get the full staking of 5%. I have seen that in another coin. I also had staking in 5 hours and then I had to reboot my computer and for 2 days it said staking 1 day. Its proportional usually based yearly so 100 coins should get you 5 over the year it'll be more due to minting the interest Bear in mind low amounts may never get enough weight to stake |
|
|
|
How about 270? I'm getting 4.8mhs per card.
I'm getting 9.6 mhs 9.05  hmm time for more tweaking |
|
|
|
MCL wallet still broken. Have received 0 mined transactions since this one that will not accept. Not the only failed mined transaction to my wallet.
image removed to save space
NOTE: Sync is only out as I have just reopened my wallet and is not normally the case.
have you tried repairing the wallet file? if not restore an earlier backup and that unconfirmed transaction wont be there |
|
|
|
nice surprise when i turned on my pc, thanks  |
|
|
|
loving the new page just tried the neoscrypt port constantly getting waiting for work, work available, waiting for work and so on any ideas also how longs the hashx beta price going on for? i really must buy some more |
|
|
|
site and stratum down  |
|
|
|
...
still getting waiting for work from pool fairly often from your pool across all my rigs.
Absolutely no idea why, can you try Maxminers ? same on maxminers m8, guess its the sgminer build edit: scratch that hasn't happened for awhile |
|
|
|
It would probably be a good idea to spread the hash to other pools guys...
indeed but op only has the one listed, no pun intended. whats the address of the p2pool can the op be updated so maxminers is a link?? https://one.maxminers.net/https://one.suprnova.cc |
|
|
|
...
As of now I have all weekend to dedicate to damage control and supporting the project, and I have planned a healthy work/life balance for myself so that I can continue to support the project through the week as well, though I must admit that I will be much less available during the week than I am on the weekends.
...
this is very important mate, glad you're back and i didn't die of shock  @fayoling that's an awesome idea m8.
if the dev actually shows up at some point we might hear about said bounties and possibly die of shock
|
|
|
|
Nearly 200 BTC sold, there is still time. 2hours 55 minutes left. Don't miss out, grab some now!
couldn't resist anymore so got a little. does this coin name make any1 else think about kerbal space program? |
|
|
|
Actually with all the crap that has been released lately, if this coin was real it would do just fine. Seems the bar for new alts has reached its lowest point. Anyways thanks for the laugh!  we need james cameron https://www.youtube.com/watch?v=Ol9nTzDnFAE |
|
|
|
...
Use admin privileges, may be sgminer can't write the bin file.
rofl, m8 mines working fine thought i'd share my settings for antonio8's benefit Why rofl, it's a common problem ! Sgminer freezes if it can't create the bin file... If it was a bat problem, the shares wil be rejected ! apologies I thought you were telling me to start with admin privileges, from earlier posts its hashing for a few minutes before die'ing a death so I'd presume the bin files are being created properly but i could be wrong it happens often |
|
|
|
thankyou testing crypto for bumping the link on the old thread i'm watching the right one now |
|
|
|
...
Use admin privileges, may be sgminer can't write the bin file.
rofl, m8 mines working fine thought i'd share my settings for antonio8's benefit |
|
|
|
My miners keep freezing from the link in the op for my 280x and 270x.
I get the "waiting for work to b available from pool" then it freezes up. I have to keep restarting the miner.
What's your config? I'm on ocminer pool, and works well with my 290x, 280x, 7950 and 7970 i just put -I 19 in the config file, that's all --thread-concurrency 8192 -I 19 --worksize 256 -g 2 EDIT: Trying just the -I 19 I lose about 1 Mh/s on each card, 280x and 270x. I'll take it though if the miner doesn't freeze. I lost about 6 hours last night while I was asleep. if your still having problems im running an r9 270 and an r7 265 with the following settings -i 19,18 -g 2 --thread-concurrency 14208 -w 256 -g 2 --gpu-engine 1198 --gpu-memclock 1498 --gpu-powertune 20,10 giving me ~4.8mhps (270) & ~3.9mhps (265) i do keep getting "waiting for work..." every now and then but its been running since launch without a crash |
|
|
|
...
Since X13 has been pretty quiet lately, I plan on replacing the X13 coin statistics in the site's header with coins that are added across all of those other algorithms.
...
could this be done at the same time? pretty please  ...
I'll need to do some modification later today on the frontend to get hashrates to be displayed accurately, and to change worker difficulty settings since 64 as a minimum will be a little high for neoscrypt.
|
|
|
|
hmm strange , I found many blocks since yesterday.. im finding more on the cpu channel than i was using less processors !! cant run the gpu miner got a gtx650 guessing its too old a card, tried 2 builds of the miner both giving 0khps |
|
|
|
|
@fayoling that's an awesome idea m8.
if the dev actually shows up at some point we might hear about said bounties and possibly die of shock
|
|
|
|
Can someone please help me with mining this coin? I have all AMD 280x cards. I downloaded x14 miner and am using this command: setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_USE_SYNC_OBJECTS 1 sgminer -k x14 -o stratum+tcp://ganja.suprnova.cc:2307 -u *.* -p * -I 14 -w 256 --thread-concurrency 8192 It immediately crashes  put it in a bat file with pause on a new line to see the error mesages : setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_USE_SYNC_OBJECTS 1 sgminer -k x14 -o stratum+tcp://ganja.suprnova.cc:2307 -u *.* -p * -I 14 -w 256 --thread-concurrency 8192 pause Welcome GanjaCoin at https://c-cex.com exchange!Easy registration, no delays in deposits and withdrawals, very responsive interface, strong security (2FA included). You can trade GANJA to BTC, USD (Visa/MC deposits available, PayPal withdrawals and many other options). You can buy/sell our USD vouchers here: http://www.xmlgold.euhttps://c-cex.com/?p=ganja-btc https://c-cex.com/?p=ganja-usd Trading fee is 0.2%, 0% fee on crypto deposit. We also have a referral system. Our support team is very responsive and available in Skype, via support tickets and chat on exchange. Sincerely, https://c-cex.com exchange! awesome |
|
|
|
8.1 pro x64, worked fine before deleting contents of appdata Has anyone been able to sync?
can't even open the new wallet, crashes on boot: Assertion Failed!
Program D:\.........
File: src\main.cpp, Line 2583
Expression: block.GetHash{} == (!fTestNet ? hashGenesisBlock : hashGenesisBlockTestNet)
any ideas? was running ok but i tried resyncing (delete appdata content) because i hit about a hundred pos blocks in a row and figured i'd forked On what operating system? |
|
|
|
|
Show Posts
