I hope so, we are a month away now and not even a demo out or price information. With inno and bitmain new miners out to order (even though not shipping till 2019 basically) I hope they price these things well. I want reliability and a good price over the shit inno and bitmain are pushing out.
I agree... the specs are good on the new ones coming out but the prices push the roi out way too far - and we have already learned that if roi isnt within 6-9 months you most likely will not make it to roi as difficulty increases - and we all know it will as soon as the first few batches of these new miners hit the network. so if its looking like 6-9 months now, it i so going to be 12-15 months most likely. at least that is my opinion. |
|
|
|
Still no word? We have less than 2 months left in this year. If they intend to release this next year it better be a damn good price otherwise they will fall to the side like the others that try.
the last time I spoke with them I got the following: "Regarding to 1st mass-production of 'KAMIKAZE,' we’re preparing to ship from Dec. 2018 as original schedule." |
|
|
|
That's a very good question, but I wonder if it's all really worth it.
I would say yea - technically you have earned the coin but not been paid, can you imagine, even at NMC current value (which by the way was worth way more when they stopped payments) with months and months of non-payments there will be quite a bit money out there and they should pay it. |
|
|
|
out of curiousity - is slush ever going to issue the NMC rewards? Last was in like January or February if I recall |
|
|
|
hoping to buy 2 s15s, does anyone have $55 or less coupons?  the S15's sold out almost immediately. I crunched some numbers and even with the improved efficiency and hash rates the ROI is too long. at least that is my opinion. especially if in the US with the 27% tariff - I am still hoping that Triple-1 pulls thru with some more realistic numbers and delivers on their miners. |
|
|
|
They're there. 20181107 versions for both models you mention.
correct - once these are installed, you will see the LPM check box - they just didnt put "LPM" in the file name. |
|
|
|
uou.. so much work was put into this and failed to scam all the way
yeah absolute junk and confirmed scam. sad to see they are still advertised all over and that they are still selling these things. |
|
|
|
|
installed the S9i and S9j FW versions to all my S9i's and S9j's - now to wait and see how it goes.
|
|
|
|
first time seeing such screens...
It is for me, to be seeing them look like that layout for an S9. My S9's are nowhere similar to that. |
|
|
|
|
woohoo 3rd block of the month! here's to hopefully getting a few quick ones! well done sidewinder!
|
|
|
|
that is an s9? I have never seen the miner status screen look that - is that a fixed frequency miner? if so, maybe that is why it looks different than all my s9's |
|
|
|
I wanted to report some issues with a few miners running the latest version of LP and ViaBTC pool One in 10 miners (just an estimation) will report as it is hashing in the miner web interface without any hash boards present. The pool does not not accept these hashes. https://imgur.com/a/NFE1C8rwhat miner is this? does not look like an S9 - isnt the LPM FW only for the S9? |
|
|
|
after almost 46 hours, the miners are now disconnected from pool though they are apparently running (there is no error light on miner and controller and boards are powering up) - I cannot remote into them and reset has failed. update: after about 6 attempts at reset, they finally reset and are now hashing after I reconfigured. I dont know why this happened - they were both at about 13.8TH/s then both at same time went to zero and I could not connect - temps were in the 60's and humidity is at 48% 2nd update: after 15 mins of running, the miners disconnected from pool and both show blank screens on miner status - after approx. 5 mins they both reconnected to the pool and are hashing at 13.8 TH/s again. if they disconnect again, I am going to revert them to their original firmware. 3rd update: after another 10 minutes on the pool - one disconnected and the lights went out on all 3 hash boards - after a reset, 2 appear to have come back on. I am not taking any chances - all these miners ran perfect on the Nov Firmware - and now they are dropping like flies on the LPM firmware. I am now reverting all back to the Nov firmware. I did not see anything standing out in the kernel logs - but I was busy doing the resets, I did not think to copy out the logs - do the logs output somewhere automatically? So, I can go back and try to see what was going on? 4th update: one miner will work for about 10 mins after being reset, will connect to pool - no chips have X's - temps are below 75 - then it will reboot and hashboard lights will go off. I see no errors in the Kernel log - the only thing I do notice is on the system screen, the BMMINER version is blank. I have reflashed the firmware multiple times - its the same copy that the other working miners are using. Kernel log attached: [ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.14.0-xilinx-ge8a2f71-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #82 SMP PREEMPT Tue May 16 19:49:53 CST 2017
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Xilinx Zynq
[ 0.000000] cma: CMA: reserved 128 MiB at 16800000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 126976
[ 0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map debd8000
[ 0.000000] Normal zone: 992 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 126976 pages, LIFO batch:31
[ 0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[ 0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 125984
[ 0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 364356K/507904K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 143548K reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xdf800000 - 0xff000000 ( 504 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdf000000 ( 496 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc06d1374 (6949 kB)
[ 0.000000] .init : 0xc06d2000 - 0xc0705380 ( 205 kB)
[ 0.000000] .data : 0xc0706000 - 0xc074cf78 ( 284 kB)
[ 0.000000] .bss : 0xc074cf84 - 0xc078d9fc ( 259 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] ps7-slcr mapped to df802000
[ 0.000000] zynq_clock_init: clkc starts at df802100
[ 0.000000] Zynq clock init
[ 0.000015] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[ 0.000311] ps7-ttc #0 at df804000, irq=43
[ 0.000621] Console: colour dummy device 80x30
[ 0.000652] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[ 0.040207] pid_max: default: 32768 minimum: 301
[ 0.040428] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.040448] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.042577] CPU: Testing write buffer coherency: ok
[ 0.042911] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.042970] Setting up static identity map for 0x4c4b00 - 0x4c4b58
[ 0.043196] L310 cache controller enabled
[ 0.043216] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[ 0.121032] CPU1: Booted secondary processor
[ 0.210227] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.210360] Brought up 2 CPUs
[ 0.210379] SMP: Total of 2 processors activated.
[ 0.210387] CPU: All CPU(s) started in SVC mode.
[ 0.211049] devtmpfs: initialized
[ 0.213466] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.214681] regulator-dummy: no parameters
[ 0.221942] NET: Registered protocol family 16
[ 0.224173] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.226474] cpuidle: using governor ladder
[ 0.226487] cpuidle: using governor menu
[ 0.233899] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[ 0.235422] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.235435] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.235551] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[ 0.257677] bio: create slab <bio-0> at 0
[ 0.259087] vgaarb: loaded
[ 0.259796] SCSI subsystem initialized
[ 0.260917] usbcore: registered new interface driver usbfs
[ 0.261788] usbcore: registered new interface driver hub
[ 0.262035] usbcore: registered new device driver usb
[ 0.262578] media: Linux media interface: v0.10
[ 0.262734] Linux video capture interface: v2.00
[ 0.262971] pps_core: LinuxPPS API ver. 1 registered
[ 0.262983] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.263111] PTP clock support registered
[ 0.263466] EDAC MC: Ver: 3.0.0
[ 0.264509] Advanced Linux Sound Architecture Driver Initialized.
[ 0.267344] DMA-API: preallocated 4096 debug entries
[ 0.267356] DMA-API: debugging enabled by kernel config
[ 0.267437] Switched to clocksource arm_global_timer
[ 0.287067] NET: Registered protocol family 2
[ 0.287980] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.288038] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.288123] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.288170] TCP: reno registered
[ 0.288187] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.288218] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.288566] NET: Registered protocol family 1
[ 0.288929] RPC: Registered named UNIX socket transport module.
[ 0.288942] RPC: Registered udp transport module.
[ 0.288950] RPC: Registered tcp transport module.
[ 0.288959] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.288972] PCI: CLS 0 bytes, default 64
[ 0.289408] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.291419] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.293524] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.293721] msgmni has been set to 967
[ 0.294499] io scheduler noop registered
[ 0.294513] io scheduler deadline registered
[ 0.294554] io scheduler cfq registered (default)
[ 0.307088] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[ 0.307108] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[ 0.430555] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[ 0.998157] console [ttyPS0] enabled
[ 1.002396] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[ 1.010043] [drm] Initialized drm 1.1.0 20060810
[ 1.026972] brd: module loaded
[ 1.036435] loop: module loaded
[ 1.045856] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 1.051682] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 1.059455] libphy: XEMACPS mii bus: probed
[ 1.063824] ------------- phy_id = 0x3625e62
[ 1.068887] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[ 1.077636] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.084270] ehci-pci: EHCI PCI platform driver
[ 1.091587] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[ 1.098461] usbcore: registered new interface driver usb-storage
[ 1.105315] mousedev: PS/2 mouse device common for all mice
[ 1.111438] i2c /dev entries driver
[ 1.118382] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[ 1.123866] cpufreq_cpu0: failed to get cpu0 regulator: -19
[ 1.129790] Xilinx Zynq CpuIdle Driver started
[ 1.134634] sdhci: Secure Digital Host Controller Interface driver
[ 1.140835] sdhci: Copyright(c) Pierre Ossman
[ 1.145102] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.151930] mmc0: no vqmmc regulator found
[ 1.155947] mmc0: no vmmc regulator found
[ 1.197456] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[ 1.206148] usbcore: registered new interface driver usbhid
[ 1.211655] usbhid: USB HID core driver
[ 1.216374] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[ 1.222679] nand: Micron MT29F2G08ABAEAWP
[ 1.226636] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[ 1.232572] Bad block table found at page 131008, version 0x01
[ 1.238796] Bad block table found at page 130944, version 0x01
[ 1.244846] 3 ofpart partitions found on MTD device pl353-nand
[ 1.250628] Creating 3 MTD partitions on "pl353-nand":
[ 1.255718] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[ 1.263772] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[ 1.271105] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[ 1.280066] TCP: cubic registered
[ 1.283300] NET: Registered protocol family 17
[ 1.288015] Registering SWP/SWPB emulation handler
[ 1.293913] regulator-dummy: disabling
[ 1.298274] UBI: attaching mtd1 to ubi0
[ 1.731515] UBI: scanning is finished
[ 1.743287] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[ 1.750370] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 1.757113] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 1.763816] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 1.770674] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[ 1.776643] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 1.783775] UBI: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 1134783803
[ 1.792805] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[ 1.802022] UBI: background thread "ubi_bgt0d" started, PID 1080
[ 1.802027] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.805908] ALSA device list:
[ 1.805912] No soundcards found.
[ 1.822536] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082
[ 1.948044] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 1.953966] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 1.963098] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[ 1.972982] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 1.978022] UBIFS: media format: w4/r0 (latest is w4/r0), UUID B079DD56-06BB-4E31-8F5E-A6604F480DB2, small LPT model
[ 2.008646] VFS: Mounted root (ubifs filesystem) on device 0:11.
[ 2.049256] devtmpfs: mounted
[ 2.052366] Freeing unused kernel memory: 204K (c06d2000 - c0705000)
[ 3.056490] random: dd urandom read with 0 bits of entropy available
[ 3.657454]
[ 3.657454] bcm54xx_config_init
[ 4.267449]
[ 4.267449] bcm54xx_config_init
[ 7.268319] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[ 7.274410] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[ 24.759776] In axi fpga driver!
[ 24.762846] request_mem_region OK!
[ 24.766237] AXI fpga dev virtual address is 0xdf9fc000
[ 24.771370] *base_vir_addr = 0x8c510
[ 24.787034] In fpga mem driver!
[ 24.790134] request_mem_region OK!
[ 24.793664] fpga mem virtual address is 0xe2000000
[ 25.577479]
[ 25.577479] bcm54xx_config_init
[ 26.207451]
[ 26.207451] bcm54xx_config_init
[ 29.208343] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[ 29.214362] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[ 398.894199] random: nonblocking pool is initialized
This is XILINX board. Totalram: 507527168
Detect 512MB control board of XILINX
DETECT HW version=0008c510
miner ID : 80646dc676808814
Miner Type = S9
AsicType = 1387
real AsicNum = 63
use critical mode to search freq...
get PLUG ON=0x000000e0
Find hashboard on Chain[5]
Find hashboard on Chain[6]
Find hashboard on Chain[7]
set_reset_allhashboard = 0x0000ffff
Check chain[5] PIC fw version=0x03
Check chain[6] PIC fw version=0x03
Check chain[7] PIC fw version=0x03
chain[5]: [63:22] [63:5] [63:24] [63:33] [63:7] [63:54] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[5] has freq in PIC and will jump over...
Chain[5] has core num in PIC
Chain[5] ASIC[0] has core num=1
Chain[5] ASIC[2] has core num=1
Chain[5] ASIC[12] has core num=4
Chain[5] ASIC[50] has core num=5
Chain[5] ASIC[52] has core num=15
Chain[5] ASIC[55] has core num=1
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[6] has freq in PIC and will jump over...
Chain[6] has core num in PIC
Chain[6] ASIC[8] has core num=2
Chain[6] ASIC[12] has core num=4
Chain[6] ASIC[15] has core num=11
Chain[6] ASIC[37] has core num=10
Chain[6] ASIC[38] has core num=1
Chain[6] ASIC[42] has core num=15
Chain[6] ASIC[45] has core num=15
Check chain[6] PIC fw version=0x03
chain[7]: [63:22] [63:5] [63:24] [63:33] [63:24] [63:9] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[7] has freq in PIC and will jump over...
Chain[7] has core num in PIC
Chain[7] ASIC[44] has core num=4
Check chain[7] PIC fw version=0x03
get PIC voltage=91 on chain[5], value=890
get PIC voltage=91 on chain[6], value=890
get PIC voltage=91 on chain[7], value=890
set_reset_allhashboard = 0x00000000
chain[5] temp offset record: 62,-5,0,0,0,0,0,0
chain[5] temp chip I2C addr=0x98
chain[6] temp offset record: 62,-4,0,0,0,0,33,0
chain[6] temp chip I2C addr=0x98
chain[7] temp offset record: 62,-5,0,0,0,0,0,0
chain[7] temp chip I2C addr=0x98
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
CRC error counter=0
set command mode to VIL
--- check asic number
After Get ASIC NUM CRC error counter=0
set_baud=0
The min freq=700
set real timeout 52, need sleep=379392
After TEST CRC error counter=0
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
search freq for 1 times, completed chain = 3, total chain num = 3
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
restart Miner chance num=2
waiting for receive_func to exit!
waiting for pic heart to exit!
bmminer not found=32385 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
bmminer not found= 316 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
This is user mode for mining
Detect 512MB control board of XILINX
Miner Type = S9
Miner compile time: Fri Nov 17 17:57:49 CST 2017 type: Antminer S9set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
miner ID : 80646dc676808814
set_reset_allhashboard = 0x0000ffff
Checking fans!get fan[2] speed=4560
get fan[2] speed=4560
get fan[2] speed=4560
get fan[2] speed=4560
get fan[2] speed=4560
get fan[2] speed=4560
get fan[5] speed=5760
get fan[2] speed=4560
get fan[5] speed=5760
get fan[2] speed=4560
get fan[5] speed=5760
chain[5]: [63:22] [63:5] [63:24] [63:33] [63:7] [63:54] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J6] has backup chain_voltage=870
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J7] has backup chain_voltage=890
Check chain[6] PIC fw version=0x03
chain[7]: [63:22] [63:5] [63:24] [63:33] [63:24] [63:9] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J8] has backup chain_voltage=870
Check chain[7] PIC fw version=0x03
Chain[J6] orignal chain_voltage_pic=125 value=870
Chain[J7] orignal chain_voltage_pic=91 value=890
Chain[J8] orignal chain_voltage_pic=125 value=870
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
Chain[J6] has 63 asic
Chain[J7] has 63 asic
Chain[J8] has 63 asic
Chain[J6] has core num in PIC
Chain[J6] ASIC[0] has core num=1
Chain[J6] ASIC[2] has core num=1
Chain[J6] ASIC[12] has core num=4
Chain[J6] ASIC[50] has core num=5
Chain[J6] ASIC[52] has core num=15
Chain[J6] ASIC[55] has core num=1
Chain[J7] has core num in PIC
Chain[J7] ASIC[8] has core num=2
Chain[J7] ASIC[12] has core num=4
Chain[J7] ASIC[15] has core num=11
Chain[J7] ASIC[37] has core num=10
Chain[J7] ASIC[38] has core num=1
Chain[J7] ASIC[42] has core num=15
Chain[J7] ASIC[45] has core num=15
Chain[J8] has core num in PIC
Chain[J8] ASIC[44] has core num=4
miner total rate=13881GH/s fixed rate=13500GH/s
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=-4
Chain:5 base freq=662
Asic[ 0]:662
Asic[ 1]:662 Asic[ 2]:662 Asic[ 3]:662 Asic[ 4]:662 Asic[ 5]:662 Asic[ 6]:662 Asic[ 7]:662 Asic[ 8]:662
Asic[ 9]:662 Asic[10]:662 Asic[11]:662 Asic[12]:662 Asic[13]:662 Asic[14]:662 Asic[15]:662 Asic[16]:662
Asic[17]:662 Asic[18]:662 Asic[19]:662 Asic[20]:662 Asic[21]:662 Asic[22]:662 Asic[23]:662 Asic[24]:662
Asic[25]:662 Asic[26]:662 Asic[27]:662 Asic[28]:662 Asic[29]:662 Asic[30]:662 Asic[31]:662 Asic[32]:662
Asic[33]:662 Asic[34]:662 Asic[35]:662 Asic[36]:662 Asic[37]:662 Asic[38]:662 Asic[39]:662 Asic[40]:662
Asic[41]:662 Asic[42]:662 Asic[43]:662 Asic[44]:662 Asic[45]:662 Asic[46]:662 Asic[47]:662 Asic[48]:662
Asic[49]:662 Asic[50]:662 Asic[51]:662 Asic[52]:662 Asic[53]:662 Asic[54]:662 Asic[55]:662 Asic[56]:662
Asic[57]:662 Asic[58]:662 Asic[59]:662 Asic[60]:662 Asic[61]:662 Asic[62]:662
Chain:5 max freq=662
Chain:5 min freq=662
read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=-4
Chain:6 base freq=650
Asic[ 0]:650
Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650 Asic[ 8]:650
Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650 Asic[16]:650
Asic[17]:650 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650 Asic[24]:650
Asic[25]:650 Asic[26]:650 Asic[27]:650 Asic[28]:650 Asic[29]:650 Asic[30]:650 Asic[31]:650 Asic[32]:650
Asic[33]:650 Asic[34]:650 Asic[35]:650 Asic[36]:650 Asic[37]:650 Asic[38]:650 Asic[39]:650 Asic[40]:650
Asic[41]:650 Asic[42]:650 Asic[43]:650 Asic[44]:650 Asic[45]:650 Asic[46]:650 Asic[47]:650 Asic[48]:650
Asic[49]:650 Asic[50]:650 Asic[51]:650 Asic[52]:650 Asic[53]:650 Asic[54]:650 Asic[55]:650 Asic[56]:650
Asic[57]:650 Asic[58]:650 Asic[59]:650 Asic[60]:650 Asic[61]:650 Asic[62]:650
Chain:6 max freq=650
Chain:6 min freq=650
read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=-5
Chain:7 base freq=656
Asic[ 0]:656
Asic[ 1]:656 Asic[ 2]:656 Asic[ 3]:656 Asic[ 4]:656 Asic[ 5]:656 Asic[ 6]:656 Asic[ 7]:656 Asic[ 8]:656
Asic[ 9]:656 Asic[10]:656 Asic[11]:656 Asic[12]:656 Asic[13]:656 Asic[14]:656 Asic[15]:656 Asic[16]:656
Asic[17]:656 Asic[18]:656 Asic[19]:656 Asic[20]:656 Asic[21]:656 Asic[22]:656 Asic[23]:656 Asic[24]:656
Asic[25]:656 Asic[26]:656 Asic[27]:656 Asic[28]:656 Asic[29]:656 Asic[30]:656 Asic[31]:656 Asic[32]:656
Asic[33]:656 Asic[34]:656 Asic[35]:656 Asic[36]:656 Asic[37]:656 Asic[38]:656 Asic[39]:656 Asic[40]:656
Asic[41]:656 Asic[42]:656 Asic[43]:656 Asic[44]:656 Asic[45]:656 Asic[46]:656 Asic[47]:656 Asic[48]:656
Asic[49]:656 Asic[50]:656 Asic[51]:656 Asic[52]:656 Asic[53]:656 Asic[54]:656 Asic[55]:656 Asic[56]:656
Asic[57]:656 Asic[58]:656 Asic[59]:656 Asic[60]:656 Asic[61]:656 Asic[62]:656
Chain:7 max freq=656
Chain:7 min freq=656
Miner fix freq ...
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=-4
Chain:5 base freq=662
Asic[ 0]:643
Asic[ 1]:643 Asic[ 2]:643 Asic[ 3]:643 Asic[ 4]:643 Asic[ 5]:643 Asic[ 6]:643 Asic[ 7]:643 Asic[ 8]:643
Asic[ 9]:643 Asic[10]:643 Asic[11]:643 Asic[12]:643 Asic[13]:643 Asic[14]:643 Asic[15]:643 Asic[16]:643
Asic[17]:643 Asic[18]:643 Asic[19]:643 Asic[20]:643 Asic[21]:643 Asic[22]:643 Asic[23]:643 Asic[24]:650
Asic[25]:650 Asic[26]:650 Asic[27]:650 Asic[28]:650 Asic[29]:650 Asic[30]:650 Asic[31]:650 Asic[32]:650
Asic[33]:650 Asic[34]:650 Asic[35]:650 Asic[36]:650 Asic[37]:650 Asic[38]:650 Asic[39]:650 Asic[40]:650
Asic[41]:650 Asic[42]:650 Asic[43]:650 Asic[44]:650 Asic[45]:650 Asic[46]:650 Asic[47]:650 Asic[48]:650
Asic[49]:650 Asic[50]:650 Asic[51]:650 Detect a bad chip=52 on chain[5], fixed to 400M
Asic[52]:662 Asic[53]:650 Asic[54]:650 Asic[55]:650 Asic[56]:650
Asic[57]:650 Asic[58]:650 Asic[59]:650 Asic[60]:650 Asic[61]:650 Asic[62]:650
Chain:5 max freq=662
Chain:5 min freq=643
read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=-4
Chain:6 base freq=650
Asic[ 0]:650
Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650 Asic[ 8]:650
Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650 Asic[16]:650
Asic[17]:650 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650 Asic[24]:650
Asic[25]:650 Asic[26]:650 Asic[27]:650 Asic[28]:650 Asic[29]:650 Asic[30]:650 Asic[31]:650 Asic[32]:650
Asic[33]:650 Asic[34]:650 Asic[35]:650 Asic[36]:650 Asic[37]:650 Asic[38]:650 Asic[39]:650 Asic[40]:650
Asic[41]:650 Detect a bad chip=42 on chain[6], fixed to 400M
Asic[42]:650 Asic[43]:650 Asic[44]:650 Detect a bad chip=45 on chain[6], fixed to 400M
Asic[45]:650 Asic[46]:650 Asic[47]:650 Asic[48]:650
Asic[49]:650 Asic[50]:650 Asic[51]:650 Asic[52]:650 Asic[53]:650 Asic[54]:650 Asic[55]:650 Asic[56]:650
Asic[57]:650 Asic[58]:650 Asic[59]:650 Asic[60]:650 Asic[61]:650 Asic[62]:650
Chain:6 max freq=650
Chain:6 min freq=650
read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=-5
Chain:7 base freq=656
Asic[ 0]:631
Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:637 Asic[ 8]:637
Asic[ 9]:637 Asic[10]:637 Asic[11]:637 Asic[12]:637 Asic[13]:637 Asic[14]:637 Asic[15]:637 Asic[16]:637
Asic[17]:637 Asic[18]:637 Asic[19]:637 Asic[20]:637 Asic[21]:637 Asic[22]:637 Asic[23]:637 Asic[24]:637
Asic[25]:637 Asic[26]:637 Asic[27]:637 Asic[28]:637 Asic[29]:637 Asic[30]:637 Asic[31]:637 Asic[32]:637
Asic[33]:637 Asic[34]:637 Asic[35]:637 Asic[36]:637 Asic[37]:637 Asic[38]:637 Asic[39]:637 Asic[40]:637
Asic[41]:637 Asic[42]:637 Asic[43]:637 Asic[44]:637 Asic[45]:637 Asic[46]:637 Asic[47]:637 Asic[48]:637
Asic[49]:637 Asic[50]:637 Asic[51]:637 Asic[52]:637 Asic[53]:637 Asic[54]:637 Asic[55]:637 Asic[56]:637
Asic[57]:637 Asic[58]:637 Asic[59]:637 Asic[60]:637 Asic[61]:637 Asic[62]:637
Chain:7 max freq=637
Chain:7 min freq=631
max freq = 662
set baud=1
Chain[J6] PIC temp offset=62,-5,0,0,0,0,0,0
chain[5] temp chip I2C addr=0x98
chain[5] has no middle temp, use special fix mode.
Chain[J6] chip[244] use PIC middle temp offset=-5 typeID=55
New offset Chain[5] chip[244] local:46 remote:48 offset:30
Chain[J6] chip[244] get middle temp offset=30 typeID=55
Chain[J7] PIC temp offset=62,-4,0,0,0,0,33,0
chain[6] temp chip I2C addr=0x98
Chain[J7] chip[244] use PIC middle temp offset=-4 typeID=55
New offset Chain[6] chip[244] local:40 remote:42 offset:29
Chain[J7] chip[244] get middle temp offset=29 typeID=55
Chain[J8] PIC temp offset=62,-5,0,0,0,0,0,0
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
Chain[J8] chip[244] use PIC middle temp offset=-5 typeID=55
New offset Chain[7] chip[244] local:41 remote:44 offset:28
Chain[J8] chip[244] get middle temp offset=28 typeID=55
single board rate=4567 voltage limit=890 on chain[5]
get PIC voltage=870 on chain[5], check: must be < 890
retryFlag=1 will set the voltage limited on chain[5], change voltage=890
now set pic voltage=91 on chain[5]
single board rate=4501 voltage limit=890 on chain[6]
get PIC voltage=890 on chain[6], check: must be < 890
retryFlag=1 will set the voltage limited on chain[6], change voltage=890
now set pic voltage=91 on chain[6]
single board rate=4567 voltage limit=890 on chain[7]
get PIC voltage=870 on chain[7], check: must be < 890
retryFlag=1 will set the voltage limited on chain[7], change voltage=890
now set pic voltage=91 on chain[7]
Chain[J6] set working voltage=890 [91]
Chain[J7] set working voltage=890 [91]
Chain[J8] set working voltage=890 [91]
do heat board 8xPatten for 1 times
start send works on chain[5]
start send works on chain[6]
start send works on chain[7]
get send work num :57456 on Chain[5]
get send work num :57456 on Chain[6]
get send work num :57456 on Chain[7]
wait recv nonce on chain[5]
wait recv nonce on chain[6]
wait recv nonce on chain[7]
get nonces on chain[5]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
freq[00]=643 freq[01]=643 freq[02]=643 freq[03]=643 freq[04]=643 freq[05]=643 freq[06]=643 freq[07]=643
freq[08]=643 freq[09]=643 freq[10]=643 freq[11]=643 freq[12]=643 freq[13]=643 freq[14]=643 freq[15]=643
freq[16]=643 freq[17]=643 freq[18]=643 freq[19]=643 freq[20]=643 freq[21]=643 freq[22]=643 freq[23]=643
freq[24]=650 freq[25]=650 freq[26]=650 freq[27]=650 freq[28]=650 freq[29]=650 freq[30]=650 freq[31]=650
freq[32]=650 freq[33]=650 freq[34]=650 freq[35]=650 freq[36]=650 freq[37]=650 freq[38]=650 freq[39]=650
freq[40]=650 freq[41]=650 freq[42]=650 freq[43]=650 freq[44]=650 freq[45]=650 freq[46]=650 freq[47]=650
freq[48]=650 freq[49]=650 freq[50]=650 freq[51]=650 freq[52]=662 freq[53]=650 freq[54]=650 freq[55]=650
freq[56]=650 freq[57]=650 freq[58]=650 freq[59]=650 freq[60]=650 freq[61]=650 freq[62]=650
total valid nonce number:57456
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:26356
last_nonce_num:21500
get nonces on chain[6]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=911 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=908 asic[13]=912 asic[14]=912 asic[15]=805
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=857 asic[38]=911 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
asic[08]=911
core[056]=7
asic[12]=908
core[058]=5 core[060]=7
asic[15]=805
core[001]=5 core[016]=7 core[040]=5 core[045]=0 core[046]=0 core[047]=0 core[048]=0 core[049]=0 core[050]=0 core[051]=0 core[052]=0 core[053]=0 core[054]=0 core[055]=0 core[056]=0 core[058]=6 core[100]=7 core[108]=7
asic[37]=857
core[058]=7 core[062]=7 core[082]=3 core[108]=0 core[109]=0 core[110]=0 core[111]=0 core[112]=0 core[113]=0
asic[38]=911
core[043]=7
freq[00]=650 freq[01]=650 freq[02]=650 freq[03]=650 freq[04]=650 freq[05]=650 freq[06]=650 freq[07]=650
freq[08]=650 freq[09]=650 freq[10]=650 freq[11]=650 freq[12]=650 freq[13]=650 freq[14]=650 freq[15]=650
freq[16]=650 freq[17]=650 freq[18]=650 freq[19]=650 freq[20]=650 freq[21]=650 freq[22]=650 freq[23]=650
freq[24]=650 freq[25]=650 freq[26]=650 freq[27]=650 freq[28]=650 freq[29]=650 freq[30]=650 freq[31]=650
freq[32]=650 freq[33]=650 freq[34]=650 freq[35]=650 freq[36]=650 freq[37]=650 freq[38]=650 freq[39]=650
freq[40]=650 freq[41]=650 freq[42]=650 freq[43]=650 freq[44]=650 freq[45]=650 freq[46]=650 freq[47]=650
freq[48]=650 freq[49]=650 freq[50]=650 freq[51]=650 freq[52]=650 freq[53]=650 freq[54]=650 freq[55]=650
freq[56]=650 freq[57]=650 freq[58]=650 freq[59]=650 freq[60]=650 freq[61]=650 freq[62]=650
total valid nonce number:57288
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:26200
last_nonce_num:28623
get nonces on chain[7]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
freq[00]=631 freq[01]=631 freq[02]=631 freq[03]=631 freq[04]=631 freq[05]=631 freq[06]=631 freq[07]=637
freq[08]=637 freq[09]=637 freq[10]=637 freq[11]=637 freq[12]=637 freq[13]=637 freq[14]=637 freq[15]=637
freq[16]=637 freq[17]=637 freq[18]=637 freq[19]=637 freq[20]=637 freq[21]=637 freq[22]=637 freq[23]=637
freq[24]=637 freq[25]=637 freq[26]=637 freq[27]=637 freq[28]=637 freq[29]=637 freq[30]=637 freq[31]=637
freq[32]=637 freq[33]=637 freq[34]=637 freq[35]=637 freq[36]=637 freq[37]=637 freq[38]=637 freq[39]=637
freq[40]=637 freq[41]=637 freq[42]=637 freq[43]=637 freq[44]=637 freq[45]=637 freq[46]=637 freq[47]=637
freq[48]=637 freq[49]=637 freq[50]=637 freq[51]=637 freq[52]=637 freq[53]=637 freq[54]=637 freq[55]=637
freq[56]=637 freq[57]=637 freq[58]=637 freq[59]=637 freq[60]=637 freq[61]=637 freq[62]=637
total valid nonce number:57456
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:26093
last_nonce_num:28620
chain[5]: All chip cores are opened OK!
Test Patten on chain[5]: OK!
chain[6]: some chip cores are not opened FAILED!
Test Patten on chain[6]: FAILED!
chain[7]: All chip cores are opened OK!
Test Patten on chain[7]: OK!
do heat board 8xPatten for 2 times
do open core on Chain[6]...
Done open core on Chain[6]!
start send works on chain[5]
start send works on chain[6]
start send works on chain[7]
get send work num :57456 on Chain[5]
get send work num :57456 on Chain[6]
get send work num :57456 on Chain[7]
wait recv nonce on chain[5]
wait recv nonce on chain[6]
wait recv nonce on chain[7]
get nonces on chain[5]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
freq[00]=643 freq[01]=643 freq[02]=643 freq[03]=643 freq[04]=643 freq[05]=643 freq[06]=643 freq[07]=643
freq[08]=643 freq[09]=643 freq[10]=643 freq[11]=643 freq[12]=643 freq[13]=643 freq[14]=643 freq[15]=643
freq[16]=643 freq[17]=643 freq[18]=643 freq[19]=643 freq[20]=643 freq[21]=643 freq[22]=643 freq[23]=643
freq[24]=650 freq[25]=650 freq[26]=650 freq[27]=650 freq[28]=650 freq[29]=650 freq[30]=650 freq[31]=650
freq[32]=650 freq[33]=650 freq[34]=650 freq[35]=650 freq[36]=650 freq[37]=650 freq[38]=650 freq[39]=650
freq[40]=650 freq[41]=650 freq[42]=650 freq[43]=650 freq[44]=650 freq[45]=650 freq[46]=650 freq[47]=650
freq[48]=650 freq[49]=650 freq[50]=650 freq[51]=650 freq[52]=662 freq[53]=650 freq[54]=650 freq[55]=650
freq[56]=650 freq[57]=650 freq[58]=650 freq[59]=650 freq[60]=650 freq[61]=650 freq[62]=650
total valid nonce number:57456
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:26381
last_nonce_num:53914
get nonces on chain[6]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=816
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=864 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
asic[15]=816
core[045]=0 core[046]=0 core[047]=0 core[048]=0 core[049]=0 core[050]=0 core[051]=0 core[052]=0 core[053]=0 core[054]=0 core[055]=0 core[056]=0
asic[37]=864
core[108]=0 core[109]=0 core[110]=0 core[111]=0 core[112]=0 core[113]=0
freq[00]=650 freq[01]=650 freq[02]=650 freq[03]=650 freq[04]=650 freq[05]=650 freq[06]=650 freq[07]=650
freq[08]=650 freq[09]=650 freq[10]=650 freq[11]=650 freq[12]=650 freq[13]=650 freq[14]=650 freq[15]=650
freq[16]=650 freq[17]=650 freq[18]=650 freq[19]=650 freq[20]=650 freq[21]=650 freq[22]=650 freq[23]=650
freq[24]=650 freq[25]=650 freq[26]=650 freq[27]=650 freq[28]=650 freq[29]=650 freq[30]=650 freq[31]=650
freq[32]=650 freq[33]=650 freq[34]=650 freq[35]=650 freq[36]=650 freq[37]=650 freq[38]=650 freq[39]=650
freq[40]=650 freq[41]=650 freq[42]=650 freq[43]=650 freq[44]=650 freq[45]=650 freq[46]=650 freq[47]=650
freq[48]=650 freq[49]=650 freq[50]=650 freq[51]=650 freq[52]=650 freq[53]=650 freq[54]=650 freq[55]=650
freq[56]=650 freq[57]=650 freq[58]=650 freq[59]=650 freq[60]=650 freq[61]=650 freq[62]=650
total valid nonce number:57312
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:26204
last_nonce_num:22299
get nonces on chain[7]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
freq[00]=631 freq[01]=631 freq[02]=631 freq[03]=631 freq[04]=631 freq[05]=631 freq[06]=631 freq[07]=637
freq[08]=637 freq[09]=637 freq[10]=637 freq[11]=637 freq[12]=637 freq[13]=637 freq[14]=637 freq[15]=637
freq[16]=637 freq[17]=637 freq[18]=637 freq[19]=637 freq[20]=637 freq[21]=637 freq[22]=637 freq[23]=637
freq[24]=637 freq[25]=637 freq[26]=637 freq[27]=637 freq[28]=637 freq[29]=637 freq[30]=637 freq[31]=637
freq[32]=637 freq[33]=637 freq[34]=637 freq[35]=637 freq[36]=637 freq[37]=637 freq[38]=637 freq[39]=637
freq[40]=637 freq[41]=637 freq[42]=637 freq[43]=637 freq[44]=637 freq[45]=637 freq[46]=637 freq[47]=637
freq[48]=637 freq[49]=637 freq[50]=637 freq[51]=637 freq[52]=637 freq[53]=637 freq[54]=637 freq[55]=637
freq[56]=637 freq[57]=637 freq[58]=637 freq[59]=637 freq[60]=637 freq[61]=637 freq[62]=637
total valid nonce number:57456
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:26091
last_nonce_num:61060
chain[5]: All chip cores are opened OK!
Test Patten on chain[5]: OK!
chain[6]: some chip cores are not opened FAILED!
Test Patten on chain[6]: FAILED!
chain[7]: All chip cores are opened OK!
Test Patten on chain[7]: OK!
restartNum = 2 , auto-reinit enabled...
setStartTimePoint total_tv_start_sys=1013 total_tv_end_sys=1014
do read_temp_func once...
do check_asic_reg 0x08
get RT hashrate from Chain[5]: (asic index start from 1-63)
Asic[01]=73.2820 Asic[02]=75.6820 Asic[03]=71.7390 Asic[04]=68.5680 Asic[05]=79.1710 Asic[06]=75.4630 Asic[07]=75.4470 Asic[08]=67.9640
Asic[09]=77.1080 Asic[10]=72.0240 Asic[11]=75.3960 Asic[12]=68.6350 Asic[13]=70.9000 Asic[14]=67.9980 Asic[15]=77.9300 Asic[16]=113.179
Asic[17]=79.2220 Asic[18]=76.2350 Asic[19]=74.8590 Asic[20]=72.5440 Asic[21]=82.8450 Asic[22]=71.0510 Asic[23]=80.4800 Asic[24]=69.9940
Asic[25]=71.3870 Asic[26]=73.8530 Asic[27]=74.6920 Asic[28]=71.4700 Asic[29]=72.1580 Asic[30]=72.5440 Asic[31]=69.5580 Asic[32]=111.367
Asic[33]=77.9970 Asic[34]=75.5640 Asic[35]=81.2010 Asic[36]=73.1650 Asic[37]=68.0140 Asic[38]=73.1980 Asic[39]=80.3120 Asic[40]=68.0140
Asic[41]=80.6480 Asic[42]=73.7020 Asic[43]=79.0710 Asic[44]=71.5380 Asic[45]=74.0880 Asic[46]=73.9700 Asic[47]=77.2420 Asic[48]=74.9100
Asic[49]=72.7790 Asic[50]=79.2720 Asic[51]=74.4570 Asic[52]=73.8020 Asic[53]=45.9190 Asic[54]=73.1820 Asic[55]=79.8760 Asic[56]=72.9640
Asic[57]=81.3190 Asic[58]=74.2050 Asic[59]=74.6410 Asic[60]=73.1310 Asic[61]=73.7690 Asic[62]=74.1210 Asic[63]=70.6650
get RT hashrate from Chain[6]: (asic index start from 1-63)
Asic[01]=77.3590 Asic[02]=75.5310 Asic[03]=77.3090 Asic[04]=74.1880 Asic[05]=69.1720 Asic[06]=93.9520 Asic[07]=72.0240 Asic[08]=74.5070
Asic[09]=74.1880 Asic[10]=73.5680 Asic[11]=70.1950 Asic[12]=75.5470 Asic[13]=76.2180 Asic[14]=73.4170 Asic[15]=71.9070 Asic[16]=68.0650
Asic[17]=77.5610 Asic[18]=73.6010 Asic[19]=71.7560 Asic[20]=76.5710 Asic[21]=70.4470 Asic[22]=70.3970 Asic[23]=73.6010 Asic[24]=71.8400
Asic[25]=73.3660 Asic[26]=72.8970 Asic[27]=72.1580 Asic[28]=72.6450 Asic[29]=71.5380 Asic[30]=74.6580 Asic[31]=78.2480 Asic[32]=72.6110
Asic[33]=74.1380 Asic[34]=69.7090 Asic[35]=72.7960 Asic[36]=73.8020 Asic[37]=66.2530 Asic[38]=64.0880 Asic[39]=70.0610 Asic[40]=74.3390
Asic[41]=73.8020 Asic[42]=70.1620 Asic[43]=44.5930 Asic[44]=73.6680 Asic[45]=80.0270 Asic[46]=47.5460 Asic[47]=69.9440 Asic[48]=75.5810
Asic[49]=74.0370 Asic[50]=68.9870 Asic[51]=76.2520 Asic[52]=69.9440 Asic[53]=70.6320 Asic[54]=78.3490 Asic[55]=75.8830 Asic[56]=75.1610
Asic[57]=76.2180 Asic[58]=72.9970 Asic[59]=77.7450 Asic[60]=69.7930 Asic[61]=67.9810 Asic[62]=75.3290 Asic[63]=71.5380
get RT hashrate from Chain[7]: (asic index start from 1-63)
Asic[01]=71.2860 Asic[02]=73.8360 Asic[03]=89.5400 Asic[04]=70.5640 Asic[05]=73.4170 Asic[06]=79.7250 Asic[07]=74.8930 Asic[08]=69.7420
Asic[09]=77.5270 Asic[10]=74.5570 Asic[11]=71.3530 Asic[12]=74.0040 Asic[13]=73.1480 Asic[14]=73.9700 Asic[15]=79.0870 Asic[16]=100.780
Asic[17]=74.4740 Asic[18]=75.4630 Asic[19]=76.2690 Asic[20]=72.2090 Asic[21]=66.4710 Asic[22]=72.6620 Asic[23]=87.6440 Asic[24]=71.2360
Asic[25]=72.9470 Asic[26]=77.6440 Asic[27]=67.4270 Asic[28]=74.2720 Asic[29]=71.3360 Asic[30]=72.6780 Asic[31]=81.2350 Asic[32]=99.1700
Asic[33]=73.4670 Asic[34]=75.2290 Asic[35]=75.9500 Asic[36]=74.5740 Asic[37]=71.8560 Asic[38]=72.5110 Asic[39]=70.7150 Asic[40]=68.9370
Asic[41]=73.9870 Asic[42]=69.7260 Asic[43]=67.5610 Asic[44]=70.0610 Asic[45]=73.7350 Asic[46]=68.3830 Asic[47]=73.1150 Asic[48]=69.5750
Asic[49]=74.0710 Asic[50]=68.0980 Asic[51]=66.9240 Asic[52]=82.8790 Asic[53]=67.0580 Asic[54]=69.7930 Asic[55]=75.7150 Asic[56]=70.9340
Asic[57]=70.0440 Asic[58]=74.0710 Asic[59]=72.4100 Asic[60]=76.3530 Asic[61]=79.0030 Asic[62]=75.5140 Asic[63]=71.7890
Check Chain[J6] ASIC RT error: (asic index start from 1-63)
Asic[16]=113.179000
Asic[32]=111.367000
Check Chain[J7] ASIC RT error: (asic index start from 1-63)
Check Chain[J8] ASIC RT error: (asic index start from 1-63)
Asic[16]=100.780000
Done check_asic_reg
do read temp on Chain[5]
Chain[5] Chip[62] TempTypeID=55 middle offset=30
Chain[5] Chip[62] local Temp=65
Chain[5] Chip[62] middle Temp=75
Special fix Chain[5] Chip[62] middle Temp = 80
Done read temp on Chain[5]
do read temp on Chain[6]
Chain[6] Chip[62] TempTypeID=55 middle offset=29
Chain[6] Chip[62] local Temp=60
Chain[6] Chip[62] middle Temp=71
Special fix Chain[6] Chip[62] middle Temp = 75
Done read temp on Chain[6]
do read temp on Chain[7]
Chain[7] Chip[62] TempTypeID=55 middle offset=28
Chain[7] Chip[62] local Temp=62
Chain[7] Chip[62] middle Temp=72
Special fix Chain[7] Chip[62] middle Temp = 77
Done read temp on Chain[7]
set FAN speed according to: temp_highest=65 temp_top1[PWM_T]=65 temp_top1[TEMP_POS_LOCAL]=65 temp_change=-1 fix_fan_steps=0
FAN PWM: 82
read_temp_func Done!
CRC error counter=0
I see something about some not receiving something called "nonce" - what is that? and am I missing something obvious? final update: I did another firmware update on the one miner that was acting up, and it has now been up and running with zero issues for almost an hour. not sure if it was the LPM firmware or something else, but for all the miners to shut down within a minute of each other - was not network related as all my S9i's and S9j's have had no issues. I really wish I had better luck with the LPM Firmware. |
|
|
|
|
almost 24 hours and no drop in hash rate.
|
|
|
|
The update is very small.. as in it just adds the AsicBoost feature. You can upgrade S9i as well. I confirm it works, I don't own an S9j but I assume it's the same.
you may say it works and it might, but it is not designed for the S9i or S9j - there have also been people who have reported it bricked their miners - I would suggest using the right firmware for the right S9 model. The exact same reason why the S9i and S9j had different versions prior to the asicboost version. |
|
|
|
...all i know is with the LPM issue I was not looking to have any less shares on my shifts or even having zero shifts Maybe checkout the new firmware that just came out today/yesterday. I saw the guys on Discord talking about it. I think I will let others be guinea pigs first this time. |
|
|
|
True. Real-world example here is what happened to me a week ago: The kids got into the mining room and bumped the power cord or something on my 741, which knocked it out for the whole afternoon. After that valley dropped off the back-end of the 5Nd, my Shift Graph's avg bumped up 0.1TH/s... In retrospect, maybe I overreacted just a little bit in giving my kids up for adoption after they did that. :Shrug: Sure is quiet now, though.  hahaha that is funny as hell. all i know is with the LPM issue I was not looking to have any less shares on my shifts or even having zero shifts |
|
|
|
Does this update include S9i and S9j?
no this is for the S9 only not the S9i S9j |
|
|
|
5-6 hours at slush would be zero payment after bout 90 minutes. It's there for a reason.
5-6 hours on any pool makes a difference. some less than others for sure and some more as well. |
|
|
|
Bonus points if you can guess which country I'm from  belgium? |
|
|
|
|
Show Posts
