 Show Posts
|
|
Pages: [1] 2 3 »
|
|
Cleveland Cavaliers 117 @ 98 Utah Jazz
|
|
|
|
|
Memphis Grizzlies 109 @ 114 Golden State Warriors
|
|
|
|
I setup a new antminer today, but am having trouble getting it to connect to my pool. I am trying to connect to my BTCGuild pool, but no mater how I configure the setting, it is showing as dead. If I leave the pools from the default settings, the first one can connect, and the other 2 show dead.
Has anyone else had this issue? Is there a better pool that is easier to point these to?
use this Pool: Stratum.btcguild.com:3333 and I know eleuthria was having some issue's but I think they are fixed. It sometimes takes a min to connect |
|
|
|
Well ... that was unexpected. Here's another new AntS1 binary. The comment I made about the last version having Temperature Management in it was wrong. Oops. I did enable the flag in the code (which doesn't work in Bitmain's version) but I didn't realise there was no code using the flag until someone pointed it out to me later. In fact 7 of the 8 options passed to the Bitmain code are ignored: bitmain_temp, bitmain_overheat, bitmain_fan_min, bitmain_fan_max, bitmain_freq_min, bitmain_freq_max and bitmain_auto Anyway, this new binary DOES have Temperature Management code in it that I've written and tested for 24 hours now on all 3 of my ants. It takes notice of bitmain_temp and bitmain_overheat It uses the same patch as before for the luci display. My source for this version is here: https://github.com/kanoi/cgminer/tree/ants1-4.2.0-c85d846aThe binary and README are in my cgminer-binaries git here: https://github.com/kanoi/cgminer-binaries/tree/master/AntS1 <-- Follow this link to get the new binaryRead the README on the screen there for how to replace the /usr/bin/cgminer binary in your AntS1 with the new one. This binary includes all cgminer changes up to 4.2.0 and forward after that up to: https://github.com/ckolivas/cgminer/commit/4e05c30bfa12d658253ea670995156e069fdb5f0The specific AntS1 changes this time really does include: Perform temperature management (it doesn't work in the Bitmain code) I have had one person report that they cannot run the binary. I've no idea why - since others have had no trouble running yesterdays binary. If you cannot run this binary please let me know. I'm chasing up someone with literally hundreds of ants and hoping they'll use it and get expected results. Nice work, I noticed when I updated my some of my Antminer S1 that a soft reset was needed. I saw improvements on loading and response time in the web interface. I also now noticed there is a bug in LSTime that was mentioned earlier, the time isn't displayed properly. Thanks for the update  |
|
|
|
I ordered three days ago.
Still "Paid Unshipped Valid"
I emailed Bitmain yesterday but no reply.
Is it likely that he has shipped it but not yet updated the status?
Or what is happening?
It could have shipped already. I usually don't get my tracking til 1 day before it delivered. Last order I don't think I got any tracking. If it shipped UPS, you can sign up and login to MYUPS and it will show if a package is scheduled for delivery to your home. I have a current order with bitmain from tuesday that originally said unpaid and expired. It was corrected the next day, and when I check MYUPS, I can see it's already on it's way to me for monday delivery. On bitmain website it still shows "paid unshipped valid". And I haven't emailed or bothered them even once. MyUPS is not offered in most countries, I think it's only a US thing. |
|
|
|
Hello all,
I was wondering if any of you is having (or had) the following problem:
I ordered through the website of Bitmain and as stated on the website, the payment has to be done within 1 hour. I paid straight after I received the payment adress, but the payment itself did not reached enough confirmations (or whatever happened) to appear as 'paid' on the Bitmain-website.
So in short, my payment was not processed within the 1 hour after ordering. Now the order says 'expired' but I did pay.
I already emailed Bitmain regarding this issue but I was wondering if any of you guys had this before aswell?
Thanks in advance.
Bitmain posted here about this, i'd still keep an eye on it https://bitcointalk.org/index.php?topic=417159.msg5786310#msg5786310 |
|
|
|
|
Since the beginning of January, the 12V rail puts out 62A which seems like it is enough.
|
|
|
|
|
The CX750 will run 2 antminer S1 OC to 393MHz and will get you ~200GH/s each
|
|
|
|
Bitmain has been great, I did have an order that hadn't shipped in 5 days. I sent Bitmain a PM with the transaction ID and he sent it out the same day. They even gave some credit Nothin but top notch customer service I would suggest if you ordered from Bitmain to PM on the form with your transaction ID and order info |
|
|
|
|
If you did in deed upgrade ok and verified the md5 checksum's, the next issue would be your network settings.
What are your router settings and range if using dhcp and what is your antminer set up to use
|
|
|
|
my version
Linux version 3.10.12 (xxl@ubuntu) (gcc version 4.6.4 (OpenWrt/Linaro GCC 4.6-2013.05 r38031) ) #10 Thu Dec 26 09:03:53 CST 2013
i,m update firmware already but
it,s not change. ( version firmware notchange )
please tell me step by step
i can ssh to my antminer
please
You are one version behind use this link to download the latest image https://github.com/AntMiner/AntGen1/tree/master/firmware |
|
|
|
Please help me.
Fri Mar 7 20:26:33 2014 daemon.info sysinit: ntpd: resolved peer 0.openwrt.pool.ntp.org to 203.185.69.60
Fri Mar 7 20:26:33 2014 daemon.info sysinit: ntpd: sent query to 203.185.69.60
Fri Mar 7 20:26:33 2014 daemon.info sysinit: ntpd: reply from 203.185.69.60: reach 0x01 offset -7.486008 delay 15.006532 status 0x24 strat 1 refid 0x50505300 rootdelay 0.000000
Fri Mar 7 20:26:33 2014 daemon.info sysinit: Alarm clock
Fri Mar 7 20:26:33 2014 daemon.info sysinit: ntpd: resolved peer 3.openwrt.pool.ntp.org to 203.158.111.11
Fri Mar 7 20:26:33 2014 daemon.info sysinit: ntpd: sent query to 203.158.111.11
Fri Mar 7 20:26:48 2014 daemon.info sysinit: ntpd: resolved peer 2.openwrt.pool.ntp.org to 203.158.118.2
Fri Mar 7 20:26:48 2014 daemon.info sysinit: ntpd: sent query to 203.158.118.2
Fri Mar 7 20:26:48 2014 daemon.info sysinit: ntpd: resolved peer 1.openwrt.pool.ntp.org to 203.185.69.60
Fri Mar 7 20:26:48 2014 daemon.info sysinit: ntpd: sent query to 203.185.69.60
Fri Mar 7 20:26:48 2014 daemon.info sysinit: ntpd: resolved peer 0.openwrt.pool.ntp.org to 203.158.118.2
Fri Mar 7 20:26:48 2014 daemon.info sysinit: ntpd: sent query to 203.158.118.2
Fri Mar 7 20:26:48 2014 daemon.info sysinit: ntpd: reply from 203.158.111.11: reach 0x01 offset -7.522214 delay 15.078239 status 0x24 strat 2 refid 0xcbb9453c rootdelay 0.004685
Fri Mar 7 20:26:48 2014 daemon.info sysinit: ntpd: reply from 203.158.118.2: reach 0x01 offset -0.003117 delay 0.042517 status 0x24 strat 2 refid 0xcbb9453c rootdelay 0.006317
Fri Mar 7 20:26:48 2014 daemon.info sysinit: ntpd: reply from 203.185.69.60: reach 0x01 offset -0.002515 delay 0.039494 status 0x24 strat 1 refid 0x50505300 rootdelay 0.000000
Fri Mar 7 20:26:48 2014 daemon.info sysinit: Alarm clock
Fri Mar 7 20:26:48 2014 daemon.info sysinit: ntpd: resolved peer 3.openwrt.pool.ntp.org to 203.158.118.2
Fri Mar 7 20:26:48 2014 daemon.info sysinit: ntpd: sent query to 203.158.118.2
Fri Mar 7 20:27:01 2014 cron.info crond[577]: crond: user root: process already running: /usr/bin/cgminer-monitor
I read FAQ . but i don,t understand .
STEP 1 : Modify/etc/init.d/cgminer
cnt=0
if [ ! -f /tmp/cgminer-ntpd-done ]; then
while [ "$NTPD_RET" != "0" ]; do
ntpd -d -n -q -N \
-p 0.openwrt.pool.ntp.org \
-p 1.openwrt.pool.ntp.org \
-p 2.openwrt.pool.ntp.org \
-p 3.openwrt.pool.ntp.org
cnt=$ (($cnt+1))
if [ $cnt -gt 2 ];then
echo cnt
break
fi
NTPD_RET=$?
done
touch /tmp/cgminer-ntpd-done
fi
STEP 2: Disable NTPD client for linux
STEP 3: Re-power antminer
Please explain me step by step.
thankyou so much.
if you ssh into your antminer s1, do cat /etc/init.d/cgminer does it match what you provided? An easier way to fix your problem might be just to upgrade the firmware. What version are you running ? |
|
|
|
Ordered another one and paid on Monday, but still says 'paid, valid, unshipped'. That's really unusual for Bitmain, 5 days now ... most of the others I have shipped in 2 days.
Anybody else experiencing slight delays?
I ordered on Monday. Shipped on Friday. I ordered 2 on Monday show paid, unshipped, valid I'm not sure what's going on this is the first time this has happened, I contacted Bitmain via email yesterday but no response yet. If it's not here withing the next hour it looks like Monday for me I hope. I have always received my tracking before receiving my order. This is a little odd. |
|
|
|
I just got my first Antminer S1 yesterday. I went to set it up and it won't stay on more then a few sec. I'll turn on the power and It will flash a few green light on the side. The ethernet ports will light up and then when i go to log in about 15 sec after it Flashes crazy fast green lights on the side and dies. WTF?
What size power supply are you using ? If your supply is under powered it will shut off after a few min |
|
|
|
I hope you all get it sorted out, but mine did go through ok. Also to note about the coupons I received one for my order on the 21 but not for the one on the 16 and one arrived a day before the other. still happy for the coupon |
|
|
|
|
Hi Zoomhash, I see on your 10 pack you show
10 piece barrel connectors so that you can use your own computer PSU
is this something that plugs into a standard computer PSU or do we need to wire it up. Pictures would be nice
Thanks,
|
|
|
|
|
I would like to still get mine declared the same way the have been for the last month no problems here.
|
|
|
|
When did you order? I had one delivered today and one yesterday both with ~$28 CDN fee's same as normal, shipped UPS to Canada one of mine was ordered on the 16 the other was the 21 of February I was looking at ordering 2 more today but not sure with this jump in import fee's people are talking about |
|
|
|
|
I'd agree DHL is no good in Canada at lest in Winnipeg, they are slow compared to UPS and cost more for brokerage and duties (in my experience)
|
|
|
|
|
