 Show Posts
|
|
Pages: [1] 2 »
|
|
I want to buy 2 to test them, I live in Canada.
|
|
|
|
I added both folders to exclusion list and it still gives me the same error and the same "trojan" shows up in defender. What's coinminer!bit ? I never had this problem before and I've been using awesomeminer for a long time.
exclude the folders under AppData/Roaming as well. also delete the claymore miner zip file so it redownloads...sometimes intervention from AV means corrupted download and AM can happen to not know and trying to open corrupt zip file. excluding roaming solved the problem, thanks! |
|
|
|
|
I added both folders to exclusion list and it still gives me the same error and the same "trojan" shows up in defender. What's coinminer!bit ? I never had this problem before and I've been using awesomeminer for a long time.
it only does this with Claymore eth miner since the update
|
|
|
|
|
Starting Diagnostics. Awesome Miner version: 4.4.3
Starting Mining Software
Setting up Miner Engine. Instance: 1
Engine Type: EthClayMiner, Auto Download: True, EnginePath: , Subtype: Disabled, CustomExecutable:
Failed to start miner process: Blocked by security softwareOperation did not complete successfully because the file contains a virus or potentially unwanted software.
Failed to start miner in Diagnostics mode
Diagnostics completed
I looked at Defender and it intercepts the following: Trojan:win32/coinminer!bit
help?
|
|
|
|
|
"You enabled full remote management, but didn't set -mspw..." What's this error? i didn't change anything on my end and it started when I updated thw minee.
|
|
|
|
I have multiple zen secure node running, would this work for those? |
|
|
|
|
Is it possible to mine Neoscrypt with AMD gpus on the profit managed miner? I can't seem to get it to work.
|
|
|
|
Is there anyway to see which/how many miner(s) mined which coin for how long in the last say 24h? Sometimes it swiches a few times between coins during a day and I was wondering if I could see the stats and profitability of what it mined.
I agree with the above suggestion. Perhaps to enhance the dashboard with more pertinent information. - include 30 minute / 1 hour running hash rate average in both the dashboard and miners view (place it below the 5 second average). Could also have it as an option that users can choose a selected interval - option to save algorithm hash rate every X minutes based on a current running average. With 10+ miners it gets busy trying to save average hash rates manually.
List miners view--option to add the pool name directly under the miner name/local (as someone who mines multiple pools it is the only reason I select the miner pool tab) --option to add windows uptime directly under the status where the algorithm uptime is displayed (only reason I select the miner summary tab) Yiimp poolsany way to automatically pull in each fee per algorithm for profit switching Naming workers: How can identify separate miners in Yiimp dashboards that use the same bitcoin address for a worker name? I assume I have to adjust the stratum configuration so it would display the text under the extra column in the worker dashboard yiimp uses. Keep up the good work. After 1.5 weeks of using the program, I paid for the professional version. Can someone specify how to add mining software for awesome miner to use? I downloaded version of ccminer that uses Xevan, I put in appdata/local/awesomeminer and I added a user defined managed software, but nowhere can I find where you specify the path to the software so it knows to use it.
Edit profit profile, scroll down and you should see the new miner. Click configure, add the path. You also have to place the miner up in priority using the arrows above any other miner that has that same algorithm enabled. Great Suggestions! |
|
|
|
|
Is there anyway to see which/how many miner(s) mined which coin for how long in the last say 24h? Sometimes it swiches a few times between coins during a day and I was wondering if I could see the stats and profitability of what it mined.
|
|
|
|
Hi guys, I'm getting this issue as well, Cast XMR is listed on the Managed Software section but not selectable within the Profit Profiles Thanks Awesome Miner version 4.2.4
- Cast XMR miner supported as Managed Miner
- New settings for wait time before terminating mining software and delay for auto starting miners on bootup
- Command line and custom exe-file configurable per Managed Profit Miner
- "Remove miner" added to context menu in miner list
- South African Rand added as display currency
- E-mail configuration includes a button for sending a test message
- Disabled Blake2b (sia) on Ccminer
- Correction to Wallet balance list
- Correction to benchmarking
I love you patrike thanks so much for this update I just have one question, I see cast-xmr in "managed miners" but I can't select it in my profit profiles, how do I make my miners use it for cryptonight? Cast XMR was introduced as a Managed Miner, but not yet listed as an option for Profit switching. I was hoping to get some feedback on the Cast XMR implementation made so far before I make it available for profit switching as well - because then much more people will start using it. I don't know if there would have been an easier way to do it but I removed all my profit managed miners and re-added them as managed miners and now it works fine. The only thing is I have to --open cl 0/1/2 depending on the worker and I also had to add the worker name to the pw for my ETN pool so I have a bunch of console commands set up for each miner and I'm thinking, if I switch algo (and which uses another miner) I won't be able to save those specific worker settings for this miner, right? Will I have to re-enter them again one by one? Also I've read earlier that you could scale down profitability for a coin, do I have to manually re-add ETN through the "Coins & Profit" option tab or is there another way? Edit: one suggestion I'd make for cast is to make it press q in the console when it you close the miner through Awesome otherwise GPUs get stuck, it's really weird if you don't close the miner that way. |
|
|
|
Awesome Miner version 4.2.4
- Cast XMR miner supported as Managed Miner
- New settings for wait time before terminating mining software and delay for auto starting miners on bootup
- Command line and custom exe-file configurable per Managed Profit Miner
- "Remove miner" added to context menu in miner list
- South African Rand added as display currency
- E-mail configuration includes a button for sending a test message
- Disabled Blake2b (sia) on Ccminer
- Correction to Wallet balance list
- Correction to benchmarking
I love you patrike thanks so much for this update I just have one question, I see cast-xmr in "managed miners" but I can't select it in my profit profiles, how do I make my miners use it for cryptonight? |
|
|
|
|
How long does it take to get paid? I have a large pending balance that has been sitting there for 12 hours...
|
|
|
|
|
This fucking game cost me so much money by delaying my ether trade, I just lost 8k$ because of it. I already abhorred cats in real life, I now abhor virtual ones too.
|
|
|
|
|
I'm building a 12 GPU rig and that require the latest AMD drivers, what kind of Hashrate should I expect not running the august blockchain driver?
|
|
|
|
|
I've managed to set it so I can start Cast-XMR remotely on my miners (using generic miner) but I'm not getting any stats on profitability, is there any work around I could use in the mean time to make it detect hash rate? All it detects right now is where it is mining or offline.
|
|
|
|
How do I make profit switching work with dual mining?
If it's more profitable to do dual mining, the profit switcher will automatically do that. Please review the "Dual mining hashrate" and "Dual mining power" in the profit profile (Options dialog, profit profile section, edit AMD or nVidia), and make sure the numbers looks good. You can also review the calculations if you right click on a running Managed Profit Miner and select View Details, then go to Profit switching tab. Sorry Patrike it was a problem on my end, I hadn't updated my version of Awesome Miner. It works flawlessly now, do you if there is any chance of adding XMR-stak Cast-xmr support? I am getting 30% more hashes with Cast-Xmr vs claymore on my RX 580s. I might get supported, but I get a large number of requets for features and more mining software right now. I added support for XMR-Stak and DSTM Zcash last week for example. Thanks, great to now. I think cast-Xmr will get really popular since it's by far and large the most powerful cryptonight miner. |
|
|
|
How and where can we use this command ?
cast_xmr --help
Once miner is running, how can I see stats such as active pool, averages, ...
Also I have a correct global hashrate but most of the lines are empty... Is this normal ??
[14:05:45] GPU3 | 63°C | Fan 2085 RPM | 0.0 H/s
[14:05:45] GPU4 | 64°C | Fan 2188 RPM | 0.0 H/s
[14:05:45] GPU5 | 62°C | Fan 1886 RPM | 0.0 H/s
[14:05:45] GPU0 | 63°C | Fan 1922 RPM | 835.8 H/s
[14:05:45] GPU1 | 63°C | Fan 1979 RPM | 0.0 H/s
[14:05:45] GPU2 | 64°C | Fan 2013 RPM | 0.0 H/s
[14:05:45] GPU3 | 63°C | Fan 2083 RPM | 0.0 H/s
[14:05:45] GPU4 | 63°C | Fan 2187 RPM | 0.0 H/s
[14:05:45] GPU5 | 62°C | Fan 1886 RPM | 0.0 H/s
[14:05:46] GPU0 | 63°C | Fan 1923 RPM | 0.0 H/s
[14:05:46] GPU1 | 64°C | Fan 1976 RPM | 0.0 H/s
[14:05:46] GPU2 | 64°C | Fan 2014 RPM | 0.0 H/s
[14:05:46] GPU3 | 63°C | Fan 2080 RPM | 0.0 H/s
[14:05:46] GPU4 | 64°C | Fan 2188 RPM | 0.0 H/s
[14:05:46] GPU5 | 62°C | Fan 1885 RPM | 843.5 H/s
[14:05:46] GPU0 | 62°C | Fan 1923 RPM | 0.0 H/s
[14:05:46] GPU1 | 63°C | Fan 1976 RPM | 0.0 H/s
[14:05:46] GPU2 | 63°C | Fan 2015 RPM | 0.0 H/s
[14:05:46] GPU3 | 63°C | Fan 2081 RPM | 0.0 H/s
[14:05:46] GPU4 | 63°C | Fan 2190 RPM | 862.8 H/s
[14:05:46] GPU5 | 61°C | Fan 1886 RPM | 0.0 H/s
[14:05:46] GPU0 | 62°C | Fan 1923 RPM | 0.0 H/s
[14:05:46] GPU1 | 63°C | Fan 1975 RPM | 0.0 H/s
[14:05:46] GPU2 | 63°C | Fan 2016 RPM | 0.0 H/s
[14:05:46] GPU3 | 63°C | Fan 2081 RPM | 831.6 H/s
[14:05:46] GPU4 | 63°C | Fan 2190 RPM | 0.0 H/s
[14:05:46] GPU5 | 61°C | Fan 1885 RPM | 0.0 H/s
[14:05:48] GPU0 | 62°C | Fan 1921 RPM | 0.0 H/s
[14:05:48] GPU1 | 64°C | Fan 1958 RPM | 763.0 H/s
[14:05:48] GPU2 | 64°C | Fan 2032 RPM | 0.0 H/s
[14:05:48] GPU3 | 63°C | Fan 2081 RPM | 0.0 H/s
[14:05:48] GPU4 | 64°C | Fan 2193 RPM | 0.0 H/s
[14:05:48] GPU5 | 61°C | Fan 1884 RPM | 0.0 H/s
[14:05:50] GPU0 | 62°C | Fan 1919 RPM | 0.0 H/s
[14:05:50] GPU1 | 63°C | Fan 1965 RPM | 0.0 H/s
[14:05:50] GPU2 | 63°C | Fan 2030 RPM | 834.8 H/s
[14:05:50] GPU3 | 63°C | Fan 2086 RPM | 0.0 H/s
[14:05:50] GPU4 | 63°C | Fan 2179 RPM | 0.0 H/s
[14:05:50] GPU5 | 62°C | Fan 1880 RPM | 0.0 H/s
[14:05:50] GPU0 | 62°C | Fan 1920 RPM | 836.4 H/s
[14:05:50] GPU1 | 63°C | Fan 1967 RPM | 0.0 H/s
[14:05:50] GPU2 | 64°C | Fan 2029 RPM | 0.0 H/s
[14:05:50] GPU3 | 63°C | Fan 2086 RPM | 0.0 H/s
[14:05:50] GPU4 | 63°C | Fan 2179 RPM | 0.0 H/s
[14:05:50] GPU5 | 62°C | Fan 1880 RPM | 0.0 H/s
[14:05:50] GPU0 | 62°C | Fan 1921 RPM | 0.0 H/s
[14:05:50] GPU1 | 63°C | Fan 1970 RPM | 0.0 H/s
[14:05:50] GPU2 | 63°C | Fan 2027 RPM | 0.0 H/s
[14:05:50] GPU3 | 63°C | Fan 2086 RPM | 0.0 H/s
[14:05:50] GPU4 | 63°C | Fan 2179 RPM | 0.0 H/s
[14:05:50] GPU5 | 61°C | Fan 1880 RPM | 834.5 H/s
[14:05:50] GPU0 | 62°C | Fan 1924 RPM | 0.0 H/s
[14:05:50] GPU1 | 63°C | Fan 1969 RPM | 0.0 H/s
[14:05:50] GPU2 | 63°C | Fan 2026 RPM | 0.0 H/s
[14:05:50] GPU3 | 63°C | Fan 2086 RPM | 0.0 H/s
[14:05:50] GPU4 | 63°C | Fan 2181 RPM | 847.7 H/s
[14:05:50] GPU5 | 61°C | Fan 1879 RPM | 0.0 H/s
[14:05:50] GPU0 | 63°C | Fan 1922 RPM | 0.0 H/s
[14:05:50] GPU1 | 62°C | Fan 1964 RPM | 0.0 H/s
[14:05:50] GPU2 | 63°C | Fan 2026 RPM | 0.0 H/s
[14:05:50] GPU3 | 64°C | Fan 2087 RPM | 728.5 H/s
[14:05:51] GPU4 | 64°C | Fan 2180 RPM | 0.0 H/s
[14:05:51] GPU5 | 61°C | Fan 1879 RPM | 0.0 H/s
I have the same problem, did you find a solution? |
|
|
|
How do I make profit switching work with dual mining?
If it's more profitable to do dual mining, the profit switcher will automatically do that. Please review the "Dual mining hashrate" and "Dual mining power" in the profit profile (Options dialog, profit profile section, edit AMD or nVidia), and make sure the numbers looks good. You can also review the calculations if you right click on a running Managed Profit Miner and select View Details, then go to Profit switching tab. Sorry Patrike it was a problem on my end, I hadn't updated my version of Awesome Miner. It works flawlessly now, do you if there is any chance of adding XMR-stak Cast-xmr support? I am getting 30% more hashes with Cast-Xmr vs claymore on my RX 580s. |
|
|
|
|
How do I make profit switching work with dual mining?
|
|
|
|
|
