Hello.

Here im adding a shared spreadsheet of different RX cards configurations,their overclock and bios settings, hashrate and power draw from the wall or GPU-Z watt draw.

Everybody feel free to add your gpus but please keep it organized so we can all profit from the best configurations and hashrates for different cards.

https://docs.google.com/spreadsheets/d/1pH326fwnYWC5Jef2FdF4KnJ4CLj0cwDDtGjrlgekk1A/edit?usp=sharing

Enjoy:)

Mattthev...  i'm just checking out on your site for the BiosMod program and just wanted to know before I run your 2.2 program for my RX570 & 580 cards should I flash back the original BIOS for each card?

if so, ok.... and then i'm guessing steps would be use your 2.2 to flash all my cards (one at a time), then DDU AMD drivers? reboot and install updated AMD adrenaline drivers, DAG patcher, reboot...?

I used the One Click BIOS mod program and just finding it not giving my RX570 & 580 4GB cards much more then 24-25 MH also having issues bringing GPU watts down.

I'm hoping your program will fix my issues.

Tks
Kevin

Gentlemen if you are having issues with claymore 11.x that you didn't have with 10.x but it want to mine keccak or verge do this.  Upgrade to 11.5 which was just released.  You need to add "-oldkernels 1".  You will have your stability back with no incorrect shares and a small speed bump too!

I have one micron card doing 32.2 and 245 keccak.  1215/2200 at 900mv

Hello Matthev,

I have 6 rx cards 5 msi 1 gigabyte.

The gigabyte one is causing lot of troubles for me, it has hynix memory i tried couple of mods to make it run good. For now i can only get 28mhz tops with 109watt. I want to reduce the watt but its quite hard.
I tried to buy from ur store but i couldnt find Gigabyte RX580 Gaming 4GB.

1. Unstable speed - I see this issue sometimes on different cards, but I have no idea about the reason - miner executes jobs on GPUs in the same way all the time, but sometimes GPU becomes slower for some time. I noticed that often different "-ethi" value helps, try "-ethi 4" or "-ethi 12" and see if it helps. I think that it must be something related to AMD drivers but I cannot confirm it yet.
2. I have a few rigs on v11.5 and they are working for days until I restart miner to perform some new tests, but I always use non-overclocked cards and default bioses, I have to do it to exclude everything except miner in case of any problems. When you use miner on overclocked/unstable rig you cannot be sure that the reason of the problems is the miner, but of course you will blame it Try to reduce "-ethi" value, if it does not help you can use the version that works fine for you.

After total shares 2265 press 's' -
ETH: Connection lost, retry in 20 sec...

After press 'r'

after that's :
TH: Received error: {"jsonrpc":"2.0","id":4,"error":{"code":-32700,"message":"Worknotfound"}}
ETH: Received error: {"jsonrpc":"2.0","id":4,"error":{"code":-32700,"message":"Worknotfound"}}
ETH: Received error: {"jsonrpc":"2.0","id":4,"error":{"code":-32700,"message":"Worknotfound"}}
ETH: Received error: {"jsonrpc":"2.0","id":4,"error":{"code":-32700,"message":"Worknotfound"}}
ETH: Received error: {"jsonrpc":"2.0","id":4,"error":{"code":-32700,"message":"Worknotfound"}}
ETH: Received error: {"jsonrpc":"2.0","id":4,"error":{"code":-32700,"message":"Worknotfound"}}
ETH: Received error: {"jsonrpc":"2.0","id":4,"error":{"code":-32700,"message":"Worknotfound"}}
ETH: Received error: {"jsonrpc":"2.0","id":4,"error":{"code":-32700,"message":"Worknotfound"}}
ETH: Received error: {"jsonrpc":"2.0","id":4,"error":{"code":-32700,"message":"Worknotfound"}}
ETH: Received error: {"jsonrpc":"2.0","id":4,"error":{"code":-32700,"message":"Worknotfound"}}
ETH: Received error: {"jsonrpc":"2.0","id":4,"error":{"code":-32700,"message":"Worknotfound"}}
ETH: Received error: {"jsonrpc":"2.0","id":4,"error":{"code":-32700,"message":"Worknotfound"}}
ETH: Received error: {"jsonrpc":"2.0","id":4,"error":{"code":-32700,"message":"Worknotfound"}}
ETH: Received error: {"jsonrpc":"2.0","id":4,"error":{"code":-32700,"message":"Worknotfound"}}
ETH: Received error: {"jsonrpc":"2.0","id":4,"error":{"code":-32700,"message":"Worknotfound"}}
ETH: Received error: {"jsonrpc":"2.0","id":4,"error":{"code":-32700,"message":"Worknotfound"}}
ETH: Received error: {"jsonrpc":"2.0","id":4,"error":{"code":-32700,"message":"Worknotfound"}}

And it minning again. This is not first time. Where is problem ?

In addition to the above, Mr Claymore, your miner reboots my rig every hour. Almost without fail. There's no error in the log, no watchdog issue with GPUs OpenCL issues, nothing. I'm baffled.

Did you download the Win wallet from their site? any issues? 

I for the life of me cant get my paper wallet imported to the Win wallet after it is all Synced up.

i have a paper wallet made from here:
http://hempcoin-paper-wallet.github.io/hempcoin-paper-wallet/

Starts with 6d for a private key and when I use the option Wallet Details it gives me an invalid Private Key... anyone have ideas?

My public address:
HDAoXLvUhvS9Pi3mmAs646fLxrRS1tpvxX

Shows the transaction sitting on the blockchain!

Is my Private Key starting with 6d (51 characters) my issue why i cant import it to the Win THC wallet???

Installing wallet for the first time. Is there a bootstrap download available?

Tks, using 1.4.1
no files in appdata/roaming/intensecoin
say blockchain data    just blockindexes.bin  and block.bin and few other files...

anyone help?

Anyone know something the about the rebrand plans? Is it a name or logo change? or both?

wallet on WIN64 just shows Disconnected when installed?  wont SYNC..   in the connection of Preferences its set to Auto..
I didn't do anything after install and it wont sync, allowed past firewall when prompted on startup.

anyone know how to get this Win64 wallet to connect?

I think this coin is done, scam also cause no one seems to answer my questions on why or how I can sweep my paper wallet of CANN coin anywhere...

Here is my Share key:
CSoxP7Ph9C6nnFdDZ199WPM8iR5bp2gBRA

cant even find block expolorer that shows it valid but I used the link of the front of this tread to make the wallet just over one month ago.

I'll even give my private key for this one paper wallet to see if anyone can figure this out?

Private Key:
6EuMvmDs8CafnKEtSkhRvGsojBswp3zBDDRgw6Dw4e11yskYi8W


it only has 24 coins on it, was my test Paper wallet to make sure all worked well.

as you can see it starts with a 6 address for private key... that's what it generated, what needs to happen to sweep it on to a hot wallet or exchange?  tried lots and cant seem to figure this out.

anyone willing to help i'll give you another private wallet once I get my main one moved back onto an exchange.

hope someone wants to help.

hey guys... hope someone can help me.. yes i'm new to this all.

Re: CannabisCoin (CANN)

I like the Cannabis stocks off the crypto arena so I started off grabbing some of these coins and also to learn with, inexpensive!

I used the Online CANN paper wallet generator as found it in a post (same as walletGenerator, but had list to choose from for Altcoins): https://bitcointalk.org/index.php?topic=827998.0
and moved things off Bittrex to the paper wallet fine.
searched and see two of the three transactions of mine on https://chainz.cryptoid.info/cann/tx.dws?3004662.htm

the 1st public address being:

CQYc3bwvgA3npdLfFYkR9duvA2KcEfgmGH
2nd:
CSoxP7Ph9C6nnFdDZ199WPM8iR5bp2gBRA
3rd:
CS8WPNS4xCuVBHNQRAPqbS6ryGLNMZuRkT

All shows everything there fine, input and amount..

problem is how do I export it back to Bittrex?  i tried sweep with few programs but get invalid.

The Private key for this one and all the three paper ones I did start with 6F, and 6E
I read about encryption and stuff with invalid Private keys but I cant seen to figure this out....

What am I missing or what is the step by step process in sorting this out?

I would love some help to sort this out before I just call it GONE..  

Thanks so much everyone, I tried to read and figure this out but just coming up empty.