 Show Posts
|
|
Pages: [1] 2 »
|
|
Ragazzi buonasera, mi riccolego a questo forum perchè avendo ancora 5 schede ferme e non fare niente visto che con la B250 dell'asus non possono andare più di 13 nvidia mi sto permontare un'altro rig per far andare queste schede.
Ho alcune domande su cui preferisco ricevere altri pareri...
1° fra tutte:
Io ho comprato 3 alimentatori da 1000W, nello specifico 3 Cooler master V1000...usando la asus b250 mining expert con solo 13 gpu posso levarne 1 da usare per il nuovo RIG? O ne prendo uno nuovo?
2°:
Che scheda madre mi consigliate per 13 GPU (visto che in futuro ne arriveranno sicuramente altre)?
|
|
|
|
I'm having a hard time finding a shop in Europe where this motherboard is available. Have you got some links?
I was also wondering if the motherboard had to be powered by ALL 24 pin connectors or if 3 molex + 1x 24 pin is enough?
You don't need to use the 4-pin molex connectors on the motherboard when using powered risers. They are only there for the few people that may still use ribbon unpowered risers. https://youtu.be/6e7ywLfRogQ?t=4628So why dont we all use unpowered risers when we can get power from the pci-e slots? Because ribbon-type risers are a ROYAL PAIN to deal with compared to USB-cable-type, and you really need powered risers ANYWAY to avoid overloading the power traces on the MB even WITH the "aux power MOLEX connectors" in use if you run a lot of cards. I am trying to setup 12x 1080ti in my B250. Should I use the mobo's "aux power molex" even if I am using 12x powered risers?? So far I got to set 7x 1080ti (4x in A slots and 3 in B slots), but I cant make windows recognize the 8th vga. The slot appears as green on boot, but Win 10 refuses to find it.  with 12 ATI i had no problem at all, after i find the correct drivers to use, i think its all about drivers humm, I havent tested other drivers, I am using the latest one. So, the ones who have 12x nvidia VGAs, which driver are you using?? I have 13x gtx 1060 and I'm using the last nvidia driver... |
|
|
|
I think it never will be support 19 normal gpus.
Amd have never said that.
You have to combine it with p106 or p104 which normal people cant buy.
Ok, but the question is, i can have 11 normal nvidia gpu and 8 p106 or not??? |
|
|
|
@Obit8
Have you done bios update directly from bios or from windows?
13 cards mining on linux?
directly from bios with a .cap file... 13 gpu on windows 10 64bit |
|
|
|
is there any place you know where this motherboard is available now ? I've been checking on all major shops and they're all out of stock. This Asus model is really attractive, it gives much more space to the pcie slots, with my current mb it's really difficult to put all risers next to each other due to the lack of space.
For those who already have it, do you measure performance differences between the different slots available? I have a 13 pcie motherboard and I have 3 underperforming slots.
Klint i don't know where you can find it! I'm using with 13 cards, for now, because it can't works with more than 13 gpu of the same model!!!! However every slot works the same way with the same performance!  |
|
|
|
|
I'm using this mobo with 13 nvidia 1060 3gb, i have other 5 cards and i don't know how to use it!!!!
Asus told that with the bios update the gpu limit would be removed but it doesn't work anyway!!!
|
|
|
|
Good afternoon guys.
I'm using this mobo with x13 msi 1060 3gb....now, Asus told that with a bios update in Q4 2017 they would anable 19 cards....i have 18 msi 1060 but if i put more then 13° card the mobo doesn't boot!!!!!
Someone with the same issue?
Did you tried to update the bios? I installed last update 5 minutes ago!  The version 1001 |
|
|
|
|
Good afternoon guys.
I'm using this mobo with x13 msi 1060 3gb....now, Asus told that with a bios update in Q4 2017 they would anable 19 cards....i have 18 msi 1060 but if i put more then 13° card the mobo doesn't boot!!!!!
Someone with the same issue?
|
|
|
|
|
Guys every day, at this time, suprnova pool for electroneum goes offline for a while.
Well, the webiste is working, but the stratum is not working.
Do You have the same issue?
|
|
|
|
The difference is the amount of miners/hashrate of the pool!
The more miners the often we will find a block and get the reward - and the reward is very high!!
Yes but so what does it mean the calculator you made to demostrate the daily profitability if the only way we have to earn is to wait for a block is discovered? I mean there is some chance, now, to find a block in 24 hours? |
|
|
|
Dear obit8!
As soon as a block has been found you'll get a reward!
The reward per block can be up to 7500 ETN!!! which will be shared between the miners
and depending on the work they have done to find the block!
Try to get more miners to the pool as i do, then much more and faster the blocks will be found!
Thank you for participating,
AUSTROhash
Ok, and why in others pools i continue to earn ETN every minute without waiting to find a block for a reward? Wich is the difference? |
|
|
|
--- AUSTROHASH ELECTRONEUM POOL --- Come over to us and get a - reliable
- fast
- upPOOL! --- ZERO FEE - 0% FEE --- Till the pool has > 10MH/s the POOL FEE will be 0%!!! DONT WAST YOUR TIME ON POOL which are too often down!!!! Your AUSTROhasher www.austrohash.atI'm mining oin your pool from 10 minutes and i can't see any ETN in the balance!!!! Who i'm mining for? |
|
|
|
--- AUSTROHASH ELECTRONEUM POOL --- Come over to us and get a - reliable
- fast
- upPOOL! --- ZERO FEE - 0% FEE --- Till the pool has > 10MH/s the POOL FEE will be 0%!!! DONT WAST YOUR TIME ON POOL which are too often down!!!! Your AUSTROhasher www.austrohash.atIs your pool better then suprnova? If yes why? |
|
|
|
Same here, the pool in the first post give 502 error! However i'm usgin suprnova without problem, just i take at least 200 ETN every 24 hours despite the 246 planned from whattomine...but after all the probleam red about in this topic i'll remain on suprnova |
|
|
|
credo che dipenda dall'hashrate della pool, se ha un basso hashrate e quindi pochi miner, sarà sempre più difficile trovare un blocco e quindi per questo i conti non tornano, forse il calcolatore usa la pool con più miner come riferimento
C'è un modo per trovare tutte le pool relative a una cryptovaluta o devo andare a tentativi? |
|
|
|
uspool.electroneum.com ripped me off?
I did this early on when hash rates were low, but never got a single ETN? Was the pool broken, and continues to be broken?
Pending Balance: 0.00 ETN
Total Paid: 0.00 ETN
Last Share Submitted: about a month ago
Hash Rate: 0 H/sec
Total Hashes Submitted: 175460
I'm on suprnova and all seems to be perfect...the only thing that i can't understand is why on "whattomine.com" i read a profit in 24 hours of 29$ but i only do 16$ per day!!!! |
|
|
|
Buonasera Minatori Sto minando da questa mattina gli electroneum sulla pool Suprnova. Non mi torna l'hashrate, mi spiego meglio. Sul sito Whattomine, per 11 1060, mi dà un valore di 4730 h/s Guardando il miner, invece, vedo un valore di 4336 h/s mentre sulla pool leggo 4.73 Mh/s... Fin qui, quindi, tutti i valori piu o meno tornano, peccato che su Whattomine mi dà un profitto potenziale di 23,58$, mentre in queste prime 9 ore di mining mi ritrovo con 58 ETN. Con questo valore dopo 9 ore, mi ritrovo con un potenziale di circa 158 ETN nelle 24 ore, che al cambio attuale sono circa 14$... Capisco che parliamo di potenziale, ma possibile che ci siano 10$ di differenza??? Poichè sicuramente sono nabbo ma ugualmente non capisco, preferisco fugare tutti i dubbi nelle prime 24 ore! Grazie a chiunque mi aiuterà!  |
|
|
|
|
There someone live in this post.
Shiould be interesting to repopolate it because i haven't found any other place looking for mona.suprnova pool!
I'm mining on this pool right now, 4 hours far from the first 24 hours and i'm real close to the first MONA mined!
Someone else in this pool?
|
|
|
|
Ragazzi io mi sono fatto un RIG e sto minando con NiceHash, ora leggendo questa discussione mi viene il dubbio!!! Cosa mi consigliate, eventualmente, di minare direttamente? Questa è la mia configurazione: ASUS B250 MINING EXPERT Intel B250 LGA 1151 (Socket H4) ATX motherboard 18 x - GTX 1060 3gb MSI gamingx 1 x - CPU intel Pentium G4400 LGA1151 3 x - Alimentatore Cooler master V1000 2 x - 4gb DDR4 2400mhz Hyper x fury 1 x - 120gb ssd (kingston adata) In questo momento, però sto usando 11 GPU perché la MOBO è in attesa di aggiornamento del BIOS per leggerle tutte! Avete consigli in merito? Puoi provare a minare Minexcoin, magari sulla pool italiana. Ma dovresti provare a fare una prova e vedere quanto produci al giorno e vedere se conviene... Ho visto che ci sono un po di critiche in atto sui Minexcoin, quindi guardando il sito Whattomine ho iniziato stamattina a vedere come mi trovo coi Monacoin...(sono veneti??) Qualcuno li sta minando? |
|
|
|
Ragazzi io mi sono fatto un RIG e sto minando con NiceHash, ora leggendo questa discussione mi viene il dubbio!!! Cosa mi consigliate, eventualmente, di minare direttamente? Questa è la mia configurazione: ASUS B250 MINING EXPERT Intel B250 LGA 1151 (Socket H4) ATX motherboard 18 x - GTX 1060 3gb MSI gamingx 1 x - CPU intel Pentium G4400 LGA1151 3 x - Alimentatore Cooler master V1000 2 x - 4gb DDR4 2400mhz Hyper x fury 1 x - 120gb ssd (kingston adata) In questo momento, però sto usando 11 GPU perché la MOBO è in attesa di aggiornamento del BIOS per leggerle tutte! Avete consigli in merito? purtroppo sei stato molto sfortunato, perchè proprio oggi nicehash è stato hackerato (o almeno così dicono loro), quindi per ora non paga nessuno, il sito è fermo Grazie a dio avevo pochi dollari su! Adesso vediamo come muoverci per iniziare a minare qualcos'altro! |
|
|
|
|
