Also thanks for advising me on the 1625 straps.

All run now @ 14.xxx 14.3 mh/s 14.1 mh/s no problem.

Updating to 10.3 claymore vs 10.0 seemed to do it. I didn't change to Blockchain drivers as I said I would, I like Adrenalines Wattman profiles anyhow.

I'm tempted to kick the mem clock to 2075 (to reach 15.0 mh/s); its at 2000 rn but its probably not worth the risk.

Here is it boys https://drive.google.com/drive/folders/1DTCpIzPC38v5ShgBu-bFzfciaQXZBxaP?usp=sharing

For u XFX 560 bois

Don't thank me tho, thank the all mighty Branko (I am not worthy), *cough* send him eth for his work *cough*

I apologize for not replying sooner, got diagnosed with severe anxiety and depression but I found the help I need and have faith everything will be ok

I will try your bios strap settings on my on other cards I'm having problems with. I'm thinking of reverting to the blockchain drivers (beta ones released in Aug) instead of the up to the date Adrenaline (now) drivers.

Damn thats strange. Does it tell you on Claymore miner (if thats what you use) that the amount CU's is 14 instead of 16? I have 16 on all of them.

I can just upload the moddedbios that can reach 14.xxx if you'd like however ur gonna have to instruct me on how to do so on here. UI isn't as simple as Anorak's site.
S/O @Branko for the bios had a throw him some ETH his way for helping a guy out.

Anyways. The Epoch DAG file creation time is 100% connected to the hashrate as my 14.xxx XFX 560 makes a DAG epoch file @ 8198 ms vs 11198 (11.xxx) for the other two .

After doing alot of research and browsing on other forums the NEW Adrenaline drivers at the time of this post (17.12.1) DO NOT play well with Afterburner. Nor Claymore batch file settings it seems. It only likes Wattman.

It's nice to FINALLY meet someone with XFX RX 560's as hopefully we can figure out how to max out these bad boys.

All is set to Compute mode. My settings are the following (I'm posting the batch file settings but these are the same I use on Afterburner):

-asm 2 -mode 1 -epool eth-us-east1.nanopool.org:9999 -ewal <INSERT RIG NAME HERE/ADDRESS> -dcri 70 -mvddc 850 -cclock 1225 -cvddc 920 -fanmin 90 -tt 70 -ethi -65536

Funny enough when I lowered the core clock to 1150 on the ones that can't make the DAG epoch file creation time, they went up to 12.1xxx stable. Branko thinks it might be a throttling problem…cards heats up and bios lowers frequencies. Might try other timings. Depends of time of course because its fucking Christmas!! Also I was able to reach 15.xxx mh/s on the bios but it crashed after 5 mins but its definitely possible.

i have a modded bios for XFX RX 560's that get me a 14.xx stable. You may be able to hit 15.xxx but I could not as the MAX mem clock was 2000 for mine. All of the ones I have are MICRON memory. However even after taking each and tuning them one by one separately. I get weird hashrates i.e 14.xxx on one while another 11.xxx on others. Its strange... not sure what is happening. I normally used the batch file on Claymore to edit the settings/set overclocks/voltage etc. But have been experimenting with using Wattman, and Afterburner.

So far Wattman is okay, but still not even hashrates all around, and AB combined with Claymore is a hit or miss sometimes to have them all at 14.xxx ;

Example: in claymore GPU0 is 11.xxx Mh/s GPU1 is 14.xxx and GPU2 is 11.xxx doesnt make any sense why this is. What I have noticed however is that the DAG file creation time for GPU1 is 8XXX ms vs 11982 ms for the other two. I'm lead to believe the faster the creation of the DAG poch file   = high hash rate.