Show Posts
|
Pages: [1]
|
I have this problem on the newest nvidia driver and newest claymore, win10, 6x Asus gtx 1070:
NVML API: failed to get device handle 4, error 15.
One card is not mining. Seems to be Card Nr.4 out of 6, gets detected in Device Manager, but not in Claymore. Also gets shown in Afterburner, but everything is grey and not changeable for that card.
Does someone know a solution to this problem?
Thanks for your help!
|
|
|
What are "ALL" you're settings for you're GPUz? what % TPD? I run 200/660/90% in AB and constant voltage, looks like u need to turn TPD % down to 80-90%, or lower you're Overclawk Settings q=]
How much power do your cards use at that settings? Going for 4 sol/watt here at 70W per card (1060 gb oc)...
|
|
|
9) there are sites/tools to help make things easier with this pool
Which sites / tools are you guys using for MPH? I know mph stats... anything else?
Thanks
|
|
|
Jan 11 10:46:38 (none) local0.warn cgminer[15902]: Pool 0 stratum+tcp://scrypt.mine.zpool.ca:3433 not responding! Jan 11 10:46:40 (none) local0.warn cgminer[15902]: Pool 0 stratum share submission failure Jan 11 10:47:09 (none) local0.warn cgminer[15902]: Pool 0 stratum+tcp://scrypt.mine.zpool.ca:3433 alive, testing stability Jan 11 10:47:10 (none) local0.warn cgminer[15902]: Pool 0 communication resumed, submitting work Jan 11 10:48:47 (none) local0.warn cgminer[15902]: Lost 2 shares due to no stratum share response from pool 0 Jan 11 10:51:47 (none) local0.warn cgminer[15902]: Pool 0 stratum+tcp://scrypt.mine.zpool.ca:3433 stable for 5 mins Jan 11 10:51:47 (none) local0.warn cgminer[15902]: Switching to pool 0 stratum+tcp://scrypt.mine.zpool.ca:3433 Jan 11 11:11:52 (none) local0.warn cgminer[15902]: Pool 0 stratum+tcp://scrypt.mine.zpool.ca:3433 not responding! Jan 11 11:11:54 (none) local0.warn cgminer[15902]: Pool 0 stratum share submission failure
Still having this problem of frequent disconnections on an L3+. Anybody having similar problems on this pool? What can I do about it?
Thanks
|
|
|
Sorry, another question...
On L3+
Jan 9 22:33:48 (none) local0.warn cgminer[21695]: Pool 0 stratum share submission failure Jan 9 22:34:18 (none) local0.warn cgminer[21695]: Pool 0 stratum+tcp://scrypt.mine.zpool.ca:3433 alive, testing stability Jan 9 22:34:18 (none) local0.warn cgminer[21695]: Pool 0 communication resumed, submitting work Jan 9 22:35:50 (none) local0.warn cgminer[21695]: Lost 1 shares due to no stratum share response from pool 0 Jan 9 22:38:50 (none) local0.warn cgminer[21695]: Pool 0 stratum+tcp://scrypt.mine.zpool.ca:3433 stable for 5 mins Jan 9 22:38:50 (none) local0.warn cgminer[21695]: Switching to pool 0 stratum+tcp://scrypt.mine.zpool.ca:3433
then
Jan 9 23:29:34 (none) local0.warn cgminer[21695]: Pool 0 stratum+tcp://scrypt.mine.zpool.ca:3433 not responding! Jan 9 23:30:05 (none) local0.warn cgminer[21695]: Pool 0 stratum+tcp://scrypt.mine.zpool.ca:3433 alive, testing stability Jan 9 23:34:51 (none) local0.warn cgminer[21695]: Pool 0 stratum+tcp://scrypt.mine.zpool.ca:3433 stable for 5 mins Jan 9 23:34:51 (none) local0.warn cgminer[21695]: Switching to pool 0 stratum+tcp://scrypt.mine.zpool.ca:3433
and again Jan 10 00:17:50 (none) local0.warn cgminer[21695]: Pool 0 stratum+tcp://scrypt.mine.zpool.ca:3433 not responding!
nearly every hour its having connection issues and switches to fallback pool.
What is the issue here? Can someone enlighten me? Have not had that problems with other pools... but frequently on Zpool. I want to stay but not loose shares every hour.
Thanks
|
|
|
Is the pool up and running again? Or still on/off error testing? I wait for a twitter message, then I looked back here.... You guys are already mining again?
Can't wait to switch back my L3+ here, coming from NH... I hope it performs better here.
Yes all is back and running. Was only about 2-3h downtime. One nagging bug stilll occurring but it’s just with the graphs on the wallet page. Thanks for the quick answer. Another thing: Is it possible to put Hashrate for Miners in the API on /miners endpoint? Would be nice! Thanks again!
|
|
|
Is the pool up and running again? Or still on/off error testing? I wait for a twitter message, then I looked back here.... You guys are already mining again?
Can't wait to switch back my L3+ here, coming from NH... I hope it performs better here.
|
|
|
seems to be working great for u. For some reason its not working for me. I know 7 bucks in 12 hours is low. and I only got 8 bucks in btc after 18 hours on that. I have moved my miners back to nicehash until they get this fixed. I was doing 47 every 24 hours with just 2 mining rigs.
How are you running your 580's on nicehash? Which software, coin, algo?
|
|
|
Hello, I would like to start pointing my 3 Nvidia rigs, one S9 and one L3+ to MPH. For the nvidia rigs I will use nemosminer, i tested it already and seems to work pretty well. For my AMD rigs I have found no perfect running solution to use with MPH until now, still on direct ETH mining with them.
I had the L3+ on MPH for a short time, not sure if it was more profitable than direct LTC mining on litecoinpool or others? Does anybody have experiences with profitability for the L3+ on different pools? Still searching for the perfect place to put that one on.
Also does it make sense or is it possible to use the S9 on MPH? There doesn't seem to be alot of action around that algo here, not a lot of coins... But I would love to not spread my gear around too many different pools too much.
Thanks!
|
|
|
I still find https://miningpoolhubstats.com a bit confusing... My workers do not show (not all of them), but they show up on MPH. Also under 24h payouts it shows all the balances of all the wallets. But if I set up autoexchange to trade everything to lets say Bitcoin Cash, it shows the highest balance in Bitcoin cash. Is it right to add this wallets payout balance to the others, as the others are exchanged to it, so does it count double? I hope I made clear what I mean, anybody have an direction how to estimate profits more exactly? Thanks
|
|
|
Its running already, but im unsure about the d=128000 setting shown on the frontpage of zpool.ca Does it do anything?
It should change the default difficulty to a level appropriate for the compute power of the L3+. Generally speaking, the pool will automatically adjust your miner's difficulty based on the rate at which it submits shares. But that can take a few minutes. So better to just set it to the recommended value from the beginning. Also, I would like to set the payout currency to LTC. Does it make any sense, can the pool payout in LTC?
Normally you can only be paid out using coins that the pool is currently mining. To my knowledge, LTC is not being mined by zpool. However, if memory serves me, earlier in this thread crackfoo stated that he was manually purchasing LTC so that he could do payouts using that coin. Presumably because it saves on fees for the pool itself. (miners don't pay fees directly; more on that below) There's no guarantee that this is still presently happening, and even if it is, there's no guarantee that it will continue happening indefinitely. So, do this at your own risk. Which coin would be better to be payed out regarding the high transaction fees of Bitcoin?
As a miner, you needn't worry about transaction fees. Fees are paid not from your balance, but using the fee taken by the pool according to the algorithm (typically 2%). Once you hit the necessary threshold, and assuming you're being paid out in a coin that the pool presently has sufficient quantity, your balance will be paid in full regardless of what the transaction fee comes to on the back end. Thanks, i got that from the website already. Why did you put "scrypt" as an argument into the password string? Thanks
It's redundant in this example, since you're not using profit switching. You can remove it from the password string in this case. All questions answered. Thank you very much! This helped me alot!
|
|
|
Hey there, Im interested in pointing my L3+ on zpool because it has so much more scrypt coins to mine than MPH. I hope to not miss out on some profitable coins that are not on MPH. (Is that an right assumption?) Does anybody have a go-to setting how to do that? Its running already, but im unsure about the d=128000 setting shown on the frontpage of zpool.ca Does it do anything? Also, I would like to set the payout currency to LTC. Does it make any sense, can the pool payout in LTC? Which coin would be better to be payed out regarding the high transaction fees of Bitcoin? Can someone enlighten me with up to date info? Thanks! username: LTC address Password: c=LTC,scrypt,d=128000 URL: stratum+tcp://scrypt.mine.zpool.ca:3433 Thanks, i got that from the website already. Why did you put "scrypt" as an argument into the password string? Thanks
|
|
|
Hey there, Im interested in pointing my L3+ on zpool because it has so much more scrypt coins to mine than MPH. I hope to not miss out on some profitable coins that are not on MPH. (Is that an right assumption?) Does anybody have a go-to setting how to do that? Its running already, but im unsure about the d=128000 setting shown on the frontpage of zpool.ca Does it do anything? Also, I would like to set the payout currency to LTC. Does it make any sense, can the pool payout in LTC? Which coin would be better to be payed out regarding the high transaction fees of Bitcoin? Can someone enlighten me with up to date info? Thanks!
|
|
|
I would be in. Have been using litecoinpool and since today trying out mph zpool is a candidate, prohashing seems interesting but the high fee makes me think twice.
lets see if more people are interested in a little experiment, or we just do 48 hours on each pool if its just us two.
|
|
|
Testing this right now with 6x 1060 6gb OC - a rig i use for testing. Normally running claymore on dagger getting a nice 22 mh/s.
Getting this as an average:
GPU1 46C Sol/s: 300.0 Sol/W: 4.14 Avg: 296.6 I/s: 158.8 Sh: 0.25 1.00 31
Does anybody have sol/s rates for a 1060 to see where if this could do better? Also, what do the +++ on the right mean?
|
|
|
|