heavyarms1912
|
|
December 30, 2017, 05:59:35 AM |
|
Has anyone had experience with this miner dropping hash rate significantly over time?
I have 2 rigs each with 13 x 1070s running on SMOS. The rigs start out at a delicious 6300 sol/s, but over about 8 hours drop steadily to about 3500 sol/s.
Obviously this is a non starter for me. My only guess is perhaps the CPU is getting overwhelmed with so many cards in the rig? I'm no Linux expert so I don't know how I'd even check that.
ruled out anything related to temp target set in config file?
|
|
|
|
kps9727
Newbie
Offline
Activity: 7
Merit: 0
|
|
December 30, 2017, 06:07:34 AM |
|
Has anyone had experience with this miner dropping hash rate significantly over time?
I have 2 rigs each with 13 x 1070s running on SMOS. The rigs start out at a delicious 6300 sol/s, but over about 8 hours drop steadily to about 3500 sol/s.
Obviously this is a non starter for me. My only guess is perhaps the CPU is getting overwhelmed with so many cards in the rig? I'm no Linux expert so I don't know how I'd even check that.
ruled out anything related to temp target set in config file? Good question. I'm not using a config file, just booting from command line. I didn't set --temp-target so this feature should not be active. Here's my command line: --server <servername> --port <portname> --user <myusername>.<myrigname> --pass <mypass> --time --telemetry=0.0.0.0:42000 Obscured my actual settings with <variables> but you get the drift.
|
|
|
|
heavyarms1912
|
|
December 30, 2017, 06:30:38 AM |
|
Has anyone had experience with this miner dropping hash rate significantly over time?
I have 2 rigs each with 13 x 1070s running on SMOS. The rigs start out at a delicious 6300 sol/s, but over about 8 hours drop steadily to about 3500 sol/s.
Obviously this is a non starter for me. My only guess is perhaps the CPU is getting overwhelmed with so many cards in the rig? I'm no Linux expert so I don't know how I'd even check that.
ruled out anything related to temp target set in config file? Good question. I'm not using a config file, just booting from command line. I didn't set --temp-target so this feature should not be active. Here's my command line: --server <servername> --port <portname> --user <myusername>.<myrigname> --pass <mypass> --time --telemetry=0.0.0.0:42000 Obscured my actual settings with <variables> but you get the drift. Only thing that pops in my mind would be the cards are stuck at lower clock state somehow. Tried monitoring the clock speeds with nvidia-smi?
|
|
|
|
kps9727
Newbie
Offline
Activity: 7
Merit: 0
|
|
December 30, 2017, 07:20:53 AM |
|
Only thing that pops in my mind would be the cards are stuck at lower clock state somehow. Tried monitoring the clock speeds with nvidia-smi?
Didn't even know that was a thing. I'll give it a try, thanks for the suggestion!
|
|
|
|
zardozer
Newbie
Offline
Activity: 15
Merit: 0
|
|
December 30, 2017, 01:26:41 PM |
|
Testing this right now with 6x 1060 6gb OC - a rig i use for testing. Normally running claymore on dagger getting a nice 22 mh/s.
Getting this as an average:
GPU1 46C Sol/s: 300.0 Sol/W: 4.14 Avg: 296.6 I/s: 158.8 Sh: 0.25 1.00 31
Does anybody have sol/s rates for a 1060 to see where if this could do better? Also, what do the +++ on the right mean?
|
|
|
|
Protofabtt
Newbie
Offline
Activity: 13
Merit: 0
|
|
December 30, 2017, 02:48:57 PM Last edit: December 30, 2017, 02:58:58 PM by Protofabtt |
|
Testing this right now with 6x 1060 6gb OC - a rig i use for testing. Normally running claymore on dagger getting a nice 22 mh/s.
Getting this as an average:
GPU1 46C Sol/s: 300.0 Sol/W: 4.14 Avg: 296.6 I/s: 158.8 Sh: 0.25 1.00 31
Does anybody have sol/s rates for a 1060 to see where if this could do better? Also, what do the +++ on the right mean?
I have a Hynix impaired 3GB EVGA single fan 1060 mini, . I have forced P0 mode for the memory using the Nvidia inspector utility. While I get 19.7 MH for ETH, I get 317 S/s average for Zcash. ETH settings are not Optimal for ZEC which is more GPU intensive. The compromise is power eff%. I am running at 90% TDP to achieve a 80% Mem controller utilization with 150 Mhz OC for both MEM and GPU. The mem OC seems to do little other than give me headroom to use the PC while it mines. Stock config gives about 290 Sol/S with P0 wait state mode enabled. The +++ indicates u got 3 shares in the last 20 sec or so (update display time) Here's my first 11 hours on Flypool. https://mega.nz/#!UXZ0kJLR!OM-sB5HPtc9KYZsvcLvFvYpH3N3LmZOHMaeuxYlq5yI
|
|
|
|
kommando98
Newbie
Offline
Activity: 7
Merit: 0
|
|
December 30, 2017, 03:11:49 PM Last edit: December 30, 2017, 03:42:25 PM by kommando98 |
|
I just set up my 8x1060 3GB rig through SMOS and I'm not seeing any plus signs on the right of the cards. The other numbers seem to indicate they are earning shares, based on shares/min numbers, etc but the lack of "+" is concerning me!
GPU0 68C Sol/s: 272.7 Sol/W: 3.44 Avg: 274.2 I/s: 146.2 Sh: 1.49 1.00 98 GPU2 68C Sol/s: 276.4 Sol/W: 3.44 Avg: 275.6 I/s: 147.2 Sh: 0.00 . . GPU1 66C Sol/s: 270.9 Sol/W: 3.47 Avg: 273.4 I/s: 147.3 Sh: 1.49 1.00 101 GPU3 68C Sol/s: 267.6 Sol/W: 3.40 Avg: 269.8 I/s: 146.1 Sh: 0.00 . . GPU4 68C Sol/s: 271.6 Sol/W: 3.42 Avg: 271.8 I/s: 147.3 Sh: 0.00 . . GPU5 62C Sol/s: 274.9 Sol/W: 3.48 Avg: 279.1 I/s: 148.7 Sh: 0.00 . . GPU6 65C Sol/s: 279.9 Sol/W: 3.50 Avg: 280.0 I/s: 148.2 Sh: 4.49 1.00 97 GPU7 56C Sol/s: 287.3 Sol/W: 3.62 Avg: 289.1 I/s: 151.4 Sh: 2.99 1.00 98 ========== Sol/s: 2201.2 Sol/W: 3.47 Avg: 2212.9 I/s: 1182.4 Sh: 10.45 1.00 98
If it matters, I'm using dwarfpool. Maybe it is due to the RBPPS and the payouts don't take place until a block is found?
Edit: just spotted a "*", still waiting on a "+". Haha!
|
|
|
|
crown99
Newbie
Offline
Activity: 8
Merit: 0
|
|
December 30, 2017, 03:36:20 PM |
|
Great performance with this miner on SimpleMining. I was getting under 300 sols per 1060 3GB GPU (6 GPUs), now I'm getting as much as 333 sols per card! Way better than EWBF.
Getting between 1917-1947 sols using 150/1100/110 settings in overclocking in simpleminer!
|
|
|
|
xenonwon
Newbie
Offline
Activity: 42
Merit: 0
|
|
December 30, 2017, 03:39:47 PM |
|
Testing this right now with 6x 1060 6gb OC - a rig i use for testing. Normally running claymore on dagger getting a nice 22 mh/s.
Getting this as an average:
GPU1 46C Sol/s: 300.0 Sol/W: 4.14 Avg: 296.6 I/s: 158.8 Sh: 0.25 1.00 31
Does anybody have sol/s rates for a 1060 to see where if this could do better? Also, what do the +++ on the right mean?
My evga 1060 6gb solo fan 70%PL 190 core 380 memory 65% fanspeed GPU4 65C Sol/s: 306.9 Sol/W: 3.86 Avg: 312.3 I/s: 167.4 Sh: 0.76 1.00 62 + GPU1 65C Sol/s: 311.5 Sol/W: 3.94 Avg: 304.0 I/s: 162.9 Sh: 0.73 1.00 51 GPU0 60C Sol/s: 302.2 Sol/W: 4.10 Avg: 311.9 I/s: 167.0 Sh: 0.80 0.99 54 GPU3 62C Sol/s: 317.9 Sol/W: 3.79 Avg: 317.1 I/s: 170.1 Sh: 0.78 1.00 47 > GPU2 62C Sol/s: 308.1 Sol/W: 3.93 Avg: 307.6 I/s: 164.9 Sh: 0.77 1.00 50 + > GPU5 66C Sol/s: 313.7 Sol/W: 4.04 Avg: 303.4 I/s: 161.1 Sh: 0.74 0.99 47
|
|
|
|
kommando98
Newbie
Offline
Activity: 7
Merit: 0
|
|
December 30, 2017, 03:43:40 PM |
|
Great performance with this miner on SimpleMining. I was getting under 300 sols per 1060 3GB GPU (6 GPUs), now I'm getting as much as 333 sols per card! Way better than EWBF.
Getting between 1917-1947 sols using 150/1100/110 settings in overclocking in simpleminer!
I'm going to have to try those overclock settings! What is your Sol/W number with that setup? I'm currently debating between max efficiency or max output!
|
|
|
|
Kejvu
Member
Offline
Activity: 70
Merit: 10
|
|
December 30, 2017, 03:54:31 PM |
|
Hi all
i was mining on Suprnova ZenCash and Whattomine show i need to get 0,053682 ZenCash for 6h but o got 0.032. Why is that? What pool is best for Zencash?
|
|
|
|
devileraser
Newbie
Offline
Activity: 4
Merit: 0
|
|
December 30, 2017, 04:09:47 PM |
|
Hi Can you help to run this miner on GTX880M:
D:\Project Document\ZCash(ZEC)\Cuda Miner\zm_0.5.7_win\zm_0.5.7_win>zm --server eu1-zcash.flypool.org --port 3333 --user t1Ja3TR6QBRDUd897sLn1YSeKc8HnWmvHbu # zm 0.5.7 # GPU0 + GeForce GTX 880M MB: 4096 PCI: 1:0
# connected to: eu1-zcash.flypool.org:3333 # server set difficulty to: 0004189374bc6a7ef9db22d0... gpu_id 0 42933008 0 invalid argument gpu 0 unresponsive - check overclocking cudaMemcpy 1 failed
|
|
|
|
crown99
Newbie
Offline
Activity: 8
Merit: 0
|
|
December 30, 2017, 04:43:24 PM |
|
Great performance with this miner on SimpleMining. I was getting under 300 sols per 1060 3GB GPU (6 GPUs), now I'm getting as much as 333 sols per card! Way better than EWBF.
Getting between 1917-1947 sols using 150/1100/110 settings in overclocking in simpleminer!
I'm going to have to try those overclock settings! What is your Sol/W number with that setup? I'm currently debating between max efficiency or max output! GPU1 56C Sol/s: 323.4 Sol/W: 2.96 Avg: 324.8 I/s: 173.8 Sh: 0.80 1.00 134 GPU4 60C Sol/s: 320.3 Sol/W: 2.95 Avg: 322.8 I/s: 173.5 Sh: 0.74 1.00 135 GPU2 58C Sol/s: 317.1 Sol/W: 3.06 Avg: 317.3 I/s: 169.4 Sh: 0.69 1.00 131 GPU0 60C Sol/s: 321.4 Sol/W: 2.96 Avg: 318.7 I/s: 171.0 Sh: 0.91 0.99 132 GPU3 61C Sol/s: 314.0 Sol/W: 3.03 Avg: 319.2 I/s: 171.0 Sh: 0.98 1.00 133 GPU5 63C Sol/s: 325.2 Sol/W: 2.98 Avg: 326.7 I/s: 175.0 Sh: 0.97 1.00 136 ========== Sol/s: 1921.5 Sol/W: 2.99 Avg: 1929.5 I/s: 1033.7 Sh: 5.09 1.00 133
|
|
|
|
Atronoss
Newbie
Offline
Activity: 56
Merit: 0
|
|
December 30, 2017, 04:56:28 PM |
|
Hi Can you help to run this miner on GTX880M:
D:\Project Document\ZCash(ZEC)\Cuda Miner\zm_0.5.7_win\zm_0.5.7_win>zm --server eu1-zcash.flypool.org --port 3333 --user t1Ja3TR6QBRDUd897sLn1YSeKc8HnWmvHbu # zm 0.5.7 # GPU0 + GeForce GTX 880M MB: 4096 PCI: 1:0
# connected to: eu1-zcash.flypool.org:3333 # server set difficulty to: 0004189374bc6a7ef9db22d0... gpu_id 0 42933008 0 invalid argument gpu 0 unresponsive - check overclocking cudaMemcpy 1 failed
Not super sure, but I think 880M has Kepler core, so you might not be able to run, since it is designed for Maxwell at least.
|
|
|
|
crown99
Newbie
Offline
Activity: 8
Merit: 0
|
|
December 30, 2017, 05:04:48 PM |
|
1060 3GB GPUs
This is with 150/1100/100 SMOS Overclock Settings
GPU1 53C Sol/s: 313.4 Sol/W: 3.18 Avg: 318.0 I/s: 171.1 Sh: 0.82 1.00 133 GPU0 56C Sol/s: 314.0 Sol/W: 3.20 Avg: 313.6 I/s: 167.2 Sh: 0.81 1.00 135 GPU2 54C Sol/s: 311.3 Sol/W: 3.29 Avg: 310.4 I/s: 165.8 Sh: 2.18 1.00 141 GPU3 56C Sol/s: 320.6 Sol/W: 3.27 Avg: 314.8 I/s: 169.0 Sh: 1.08 1.00 132 GPU4 56C Sol/s: 319.3 Sol/W: 3.21 Avg: 319.7 I/s: 170.0 Sh: 1.63 1.00 133 GPU5 60C Sol/s: 324.5 Sol/W: 3.21 Avg: 322.3 I/s: 172.2 Sh: 1.91 1.00 134 ========== Sol/s: 1903.1 Sol/W: 3.23 Avg: 1898.7 I/s: 1015.3 Sh: 8.42 1.00 134
|
|
|
|
crown99
Newbie
Offline
Activity: 8
Merit: 0
|
|
December 30, 2017, 05:12:22 PM |
|
1060 3GB GPUs
This is with 150/1100/90 SMOS Overclock Settings
GPU1 51C Sol/s: 308.3 Sol/W: 3.44 Avg: 309.2 I/s: 166.2 Sh: 1.87 1.00 127 GPU0 54C Sol/s: 307.9 Sol/W: 3.42 Avg: 305.0 I/s: 163.4 Sh: 2.23 1.00 135 GPU2 52C Sol/s: 301.8 Sol/W: 3.49 Avg: 303.6 I/s: 162.0 Sh: 2.23 1.00 130 GPU3 54C Sol/s: 302.9 Sol/W: 3.47 Avg: 308.8 I/s: 164.9 Sh: 0.75 1.00 130 GPU4 54C Sol/s: 309.3 Sol/W: 3.45 Avg: 308.5 I/s: 165.0 Sh: 1.12 1.00 128 GPU5 58C Sol/s: 314.1 Sol/W: 3.50 Avg: 313.3 I/s: 168.2 Sh: 2.61 1.00 124 ========== Sol/s: 1844.4 Sol/W: 3.46 Avg: 1848.4 I/s: 989.8 Sh: 10.82 1.00 129
|
|
|
|
kommando98
Newbie
Offline
Activity: 7
Merit: 0
|
|
December 30, 2017, 05:16:24 PM |
|
Hmmm, I can't get close to those numbers. Even at 150/1100/110 I'm barely cracking 300 across all the cards.
|
|
|
|
crown99
Newbie
Offline
Activity: 8
Merit: 0
|
|
December 30, 2017, 05:22:54 PM |
|
Hmmm, I can't get close to those numbers. Even at 150/1100/110 I'm barely cracking 300 across all the cards.
I'm going for more SOLs...power efficiency (and running cooler) is great, but I only pay .10/KWh I'll limit power during the hot summer months. This is with 150/1100/120 SMOS Overclock Settings GPU0 58C Sol/s: 324.7 Sol/W: 2.82 Avg: 321.8 I/s: 173.0 Sh: 1.99 1.00 133 GPU1 57C Sol/s: 334.2 Sol/W: 2.77 Avg: 332.7 I/s: 176.1 Sh: 1.98 1.00 135 GPU2 57C Sol/s: 322.9 Sol/W: 2.87 Avg: 324.2 I/s: 173.4 Sh: 0.99 1.00 141 GPU3 58C Sol/s: 325.2 Sol/W: 2.92 Avg: 324.4 I/s: 173.3 Sh: 1.00 1.00 137 GPU4 59C Sol/s: 325.3 Sol/W: 2.80 Avg: 329.6 I/s: 175.8 Sh: 3.00 1.00 132 GPU5 64C Sol/s: 328.5 Sol/W: 2.80 Avg: 329.7 I/s: 177.6 Sh: 2.00 1.00 134 ========== Sol/s: 1960.8 Sol/W: 2.83 Avg: 1962.5 I/s: 1049.2 Sh: 10.95 1.00 135
|
|
|
|
kommando98
Newbie
Offline
Activity: 7
Merit: 0
|
|
December 30, 2017, 05:36:54 PM |
|
GPU0 64C Sol/s: 279.7 Sol/W: 3.49 Avg: 277.9 I/s: 146.8 Sh: 0.00 . . GPU1 63C Sol/s: 280.4 Sol/W: 3.50 Avg: 280.0 I/s: 147.7 Sh: 0.00 . . GPU2 64C Sol/s: 272.3 Sol/W: 3.44 Avg: 274.2 I/s: 147.6 Sh: 0.00 . . GPU3 69C Sol/s: 274.8 Sol/W: 3.40 Avg: 271.6 I/s: 145.9 Sh: 0.99 1.00 104 GPU4 66C Sol/s: 282.2 Sol/W: 3.49 Avg: 276.2 I/s: 147.4 Sh: 0.00 . . GPU5 60C Sol/s: 281.9 Sol/W: 3.51 Avg: 279.6 I/s: 148.9 Sh: 0.00 . . GPU6 67C Sol/s: 298.0 Sol/W: 2.71 Avg: 293.5 I/s: 156.9 Sh: 0.00 . . > GPU7 65C Sol/s: 297.4 Sol/W: 2.72 Avg: 294.7 I/s: 158.4 Sh: 1.98 1.00 114 ========== Sol/s: 2266.9 Sol/W: 3.28 Avg: 2247.8 I/s: 1199.5 Sh: 2.97 1.00 109
This is with 6&7 turned up to your settings 150/1100/110 as they seem to be the best cards, but still top out at ~300Sol/s.
What do the numbers in your rig list look like? For some reason the memory clock numbers don't change even when I change them in overclock settings, maybe that's my issue:
This is what my Core/Mem column looks like: 1721 1733 1695 1733 1708 1733 1911 1961 (80,80,80,80,80,80,110,110) 3802 3802 3802 3802 3802 3802 3802 3802
The Memory numbers on the last two should be higher, since that is how they are set in the OC settings, but you can see they don't change like the core numbers do.
|
|
|
|
crown99
Newbie
Offline
Activity: 8
Merit: 0
|
|
December 30, 2017, 05:57:04 PM |
|
GPU0 64C Sol/s: 279.7 Sol/W: 3.49 Avg: 277.9 I/s: 146.8 Sh: 0.00 . . GPU1 63C Sol/s: 280.4 Sol/W: 3.50 Avg: 280.0 I/s: 147.7 Sh: 0.00 . . GPU2 64C Sol/s: 272.3 Sol/W: 3.44 Avg: 274.2 I/s: 147.6 Sh: 0.00 . . GPU3 69C Sol/s: 274.8 Sol/W: 3.40 Avg: 271.6 I/s: 145.9 Sh: 0.99 1.00 104 GPU4 66C Sol/s: 282.2 Sol/W: 3.49 Avg: 276.2 I/s: 147.4 Sh: 0.00 . . GPU5 60C Sol/s: 281.9 Sol/W: 3.51 Avg: 279.6 I/s: 148.9 Sh: 0.00 . . GPU6 67C Sol/s: 298.0 Sol/W: 2.71 Avg: 293.5 I/s: 156.9 Sh: 0.00 . . > GPU7 65C Sol/s: 297.4 Sol/W: 2.72 Avg: 294.7 I/s: 158.4 Sh: 1.98 1.00 114 ========== Sol/s: 2266.9 Sol/W: 3.28 Avg: 2247.8 I/s: 1199.5 Sh: 2.97 1.00 109
This is with 6&7 turned up to your settings 150/1100/110 as they seem to be the best cards, but still top out at ~300Sol/s.
What do the numbers in your rig list look like? For some reason the memory clock numbers don't change even when I change them in overclock settings, maybe that's my issue:
This is what my Core/Mem column looks like: 1721 1733 1695 1733 1708 1733 1911 1961 (80,80,80,80,80,80,110,110) 3802 3802 3802 3802 3802 3802 3802 3802
The Memory numbers on the last two should be higher, since that is how they are set in the OC settings, but you can see they don't change like the core numbers do.
I use a single setting for all 6 GPUs, I just setup this rig the other day and haven't spent much time tweaking it. I haven't checked, but I'm assuming the cards have decent memory (not Hynix). Try 110watt power limit for all cards and see what you get for Sol/s. I'm running 120watts, but I have great cooling in my office (I have my open rack next to open window) and it's 20 degrees F outside right now. 2050 2062 2037 2050 2075 2088 (120) 4353 4353 4353 4353 4353 4353
|
|
|
|
|