 Show Posts
|
|
Pages: [1] 2 »
|
|
Same here, I have got the Email but the BCH is not deposited to my wallet yet
|
|
|
|
Hi guys,
Please check if someone using HitBTC exchange. My Bytom wallet address was change after few days.
It is same to your guys ?
Bitmain was paying my mined BTM to my old HitBTC exhange. Will the BTM get lost ?
Thanks.
Maybe. Create a support ticket requesting Antpool to change your payment address. Also, send an email to HitBTC explaining what happened. thanks for your feedback. Can you share me the HitBTC support email ? I had tried to email them for few times ( support@hitbtc.com) , but they will never response to my email. Thanks. Guys dont worry! HitBTC BTM address are valid and I have confirmed with Bitmain. See the below email Hi,
I have set my Wallet address in Antpool for BTM. The Wallet address is HitBTC BTM Address staring "0x..."
Could you please let me know if the above address is a valid ERC20 address and payouts will be sent successfully once engineers fix the issues this week?
Thanks
Sattychrome
Dear Sattychrome,
Thanks for your consultation!
yes, the address is correct.
Please let us know if you have additional questions or concerns.
Best regards,
Joy
Bitmain
Always order products directly from our website: www.bitmain.com
"Solved" means we replied - we still work on your issue until it is resolved. |
|
|
|
Hi Guys,
My B3's Rejected and Discarded share is 12 times of the Accepted share.
Are you guys facing the same issue ?
(I'm using Antpool)
Thanks.
Yup - same here too... But I am using UUPOOL. Antpool Accepted 9200 Rejected 4700 Discarded 6000 OMG!!! Accepted 9200...Discarded 6000...You are lucky one I have seen till now.....My miner is like Accepted : 200 and Discarded : 2000  Ouch!! What are you getting in BTM per day? I was miner #4 on Antpool last Friday.... I did hop over to UUPool an then back to AntPool couple times due to the fact I was unsure I was mining anything at AntPool. Today earning was 54 BTM Yup I'm same!! Oh OK!!! then accepted...rejected or discarded doesn't matter, we all are getting the same. FYI., I am on Antpool tho... I tested UUPOOL last night and I see no difference...Last night comparison was 1 hour in Antppol and 1 hour in UUPoool. I received 3 coins....so no matter which pool you are in all are same...and no matter what the miner status shows all are earning same... |
|
|
|
Hi Guys,
My B3's Rejected and Discarded share is 12 times of the Accepted share.
Are you guys facing the same issue ?
(I'm using Antpool)
Thanks.
Yup - same here too... But I am using UUPOOL. Antpool Accepted 9200 Rejected 4700 Discarded 6000 OMG!!! Accepted 9200...Discarded 6000...You are lucky one I have seen till now.....My miner is like Accepted : 200 and Discarded : 2000 Ouch!! What are you getting in BTM per day? I was miner #4 on Antpool last Friday.... I did hop over to UUPool an then back to AntPool couple times due to the fact I was unsure I was mining anything at AntPool. Today earning was 54 BTM |
|
|
|
Hi Guys,
My B3's Rejected and Discarded share is 12 times of the Accepted share.
Are you guys facing the same issue ?
(I'm using Antpool)
Thanks.
Yup - same here too... But I am using UUPOOL. Antpool Accepted 9200 Rejected 4700 Discarded 6000 OMG!!! Accepted 9200...Discarded 6000...You are lucky one I have seen till now.....My miner is like Accepted : 200 and Discarded : 2000 |
|
|
|
2) Rejected share rates seem to be very high. Roughly 45% in my case. It doesn’t appear that my profitability has been affected at the pool, but I’d like some anecdotal feedback that others are seeing the same reject rates.
I'm having similar reject rate. Still showing ~700-800 H/s poolside so I'm not worried. No Air Cond. My Basement is little cold still and that may be the reason and my chip temperature was always 30-35 degree before I removed the fan connector...but still 40-50 is still OK. All i am saying is just remove the exhaust fan connector and just try it for an hour...I see people are struggling so much to change the config or change the fans....Which I am saying is not required. Note the current chip temperature....switch off the miner...remove the exhaust fan connector...switch the machine ON and try for an hour....Just giving my experience and noise level is way far better....
I've been running it without the exhaust fan for ~24 hours, no problems, ~5 degrees hotter than before. Cool..!!!! this confirms that is there only ~5 degree difference...Guys, whoever can remove the exhaust fan can remove and try....whoever doesn't want to remove the fans...just remove the exhaust fan connector and run the miner....You will be happy with the noise level...hope someone can sleep happily |
|
|
|
I tried, it does not work on the B3. Both fans still at max speed.
Tried this:
"bitmain-fan-ctrl" : true,
"bitmain-fan-pwm" : "50"
and
"bitmain-fan-ctrl" : true,
"bitmain-fan-pwm" : "50",
I thought a comma , was missing behind the "50" but no change ...
Guys, All I did was just remove the connector of the Exhaust fan. My chips temperature is at 35 degree and I still feel cold air coming out through the exhaust fan(I did not unmounted the fan from Miner) one fan is enough and the Noise is almost 50% less and I am happy that no disturbance from miner That cant be right. Some of us use both fans and it is 40-50 degrees as seen in above picture. U must be in a cold place? U have cold air due to air-con? No Air Cond. My Basement is little cold still and that may be the reason and my chip temperature was always 30-35 degree before I removed the fan connector...but still 40-50 is still OK. All i am saying is just remove the exhaust fan connector and just try it for an hour...I see people are struggling so much to change the config or change the fans....Which I am saying is not required. Note the current chip temperature....switch off the miner...remove the exhaust fan connector...switch the machine ON and try for an hour....Just giving my experience and noise level is way far better.... |
|
|
|
I tried, it does not work on the B3. Both fans still at max speed.
Tried this:
"bitmain-fan-ctrl" : true,
"bitmain-fan-pwm" : "50"
and
"bitmain-fan-ctrl" : true,
"bitmain-fan-pwm" : "50",
I thought a comma , was missing behind the "50" but no change ...
Guys, All I did was just remove the connector of the Exhaust fan. My chips temperature is at 35 degree and I still feel cold air coming out through the exhaust fan(I did not unmounted the fan from Miner) one fan is enough and the Noise is almost 50% less and I am happy that no disturbance from miner |
|
|
|
I've disconnected and unmounted the exhaust fan:)
48degrees at the chips and enough quiet for my use...
Thanks for the suggestion. Did the same and obviously no temp issues. Good to Hear! How is the Noise level...Are you seeing at least 50% reduced noise? |
|
|
|
I hope the miners that were complaining about the 2nd batch release (so soon and so cheap) come back and read this feed. This is the reason Bitmain had every right to release a second batch this soon and for a lower price. When the miners are making $300/day and have a 7 day head start on the the 2nd batch Bitmain can do whatever the hell they want as far as I'm concerned. Good on you Bitmain, thank you. Quite frankly, I can't believe Bitmain offered the refund. I've never seen a product released that will almost certainly ROI in less than 2 weeks.
Agree but how to ROI? I cant find a way to send the BTM from Offcial Bytom Wallet to any Exchange. I get this error "<action index 1: unknown address type>" when I try to do a transaction from the Wallet. Any idea how to exchange? |
|
|
|
|
ANTPOOL SHOWS BALANCE NOW ON THE DASHBOARD!!!!!
|
|
|
|
|
ANTPOOL SHOWS BALANCE NOW ON THE DASHBOARD!!!!!
|
|
|
|
I received payment from UUPool into the Bytom Wallet. So, their website is correct that they will payout daily between 10 AM and 4 PM (their time in China) which = 10PM (EST) to 4 AM (EST). I tried moving some using the Transaction area - however it shows an error when typing in any address that is not a BTM address. If the address starts with BM then I think it would work fine (or at least no error would show up). I tried ERC20 address, BTM exchange addresses - all would give an error.  I'm just happy I received a deposit!  Same error I get...Anyone else tried to send it to any exchange from the bytom wallet? How do we make the ROI? |
|
|
|
Hi, is that your official Bytom Wallet address that is installed on the computer? Yes, you need to use a BTM address, not an ERC20 exchange address. Once we get that in our wallet how do we send it to Exchange? any idea? anyone else tried? |
|
|
|
Hi, is that your official Bytom Wallet address that is installed on the computer? |
|
|
|
It doesnt seem that the miner monitors fan speed in this miner version. As far I can tell it runs the fans on full and completely skips the fan test cycle that usually occurs post boot with other Bitmain models.
It also runs incredible cool at just under 35 chip temps with sub 30 board temps. Thats with no cooling in a warm weather climate.
Obviously its because of the low wattage requirements. So are these fans total overkill for this miner?
Appears they slapped in stock S9 fans with no rpm governance or checks.
Can anyone confirm this?
Try this: https://www.youtube.com/watch?v=D3U_YPuN77g and set lower speed. Tell me If it works - i still dont have mine... Thanks. I will give this a shot. Dont want to shut down at the moment since rewards are high and my connection to UUPOOL has been fickle. Has anyone got payout from UUPOOL yet? Balance is getting high & Im sure we would all like to know if we can trust these operators. Also there is 550+ miners on Antpool noe and no one is reporting rewards in their dashboard? I find this very hard to believe. How is there no info about this anywhere? Not yet. What is your unpaid balance in uupool showing? Just to see what is the minimum payout, did you reach 100BTM? Or Does anyone reached more than 100 or 200 BTM and still didnt receive payouts? just curious |
|
|
|
Mining for 6 hours and "unpaid" is 95 BTM on uupool... We'll see if we get paid out. Looks like 380ish BTM/day right now
uupool shows dead for "stratum+tcp://btm.uupool.cn:9221". Is it working for you? Antpool still shows no earnings? anyone else? any other pool? dead for me too - i think it is being blocked from USA Actually just started "working" we will see if i actually get earnings. discarded shoe re really high! 35 accepted 100 discarded.. uupool working? or antpool? |
|
|
|
Mining for 6 hours and "unpaid" is 95 BTM on uupool... We'll see if we get paid out. Looks like 380ish BTM/day right now
uupool shows dead for "stratum+tcp://btm.uupool.cn:9221". Is it working for you? Antpool still shows no earnings? anyone else? any other pool? |
|
|
|
My b3 will be arriving this afternoon. I have no clue how to Solo or Pool mine with it. i never had a miner arrive where I did not have everything ready to go and up and running in 10mins. I think this one will be different.
Also can’t find a trusted exchange...
I'm in the same boat - mine will be arriving in a couple of hours and i have no idea what to do. I'm trying Coinex. They have a BTM wallet and can exchange to any other crypto. Having a BTM wallet is not going to help if we cant mine at this moment. We need a pool to mine first and none is available yet Looks like http://uupool.cn/ is working at the moment. The website is in Chinese so use google translate. Currently 10 machines on the pool and it look like they're finding blocks every 2-4 minutes. You can find a tutorial on how to connect to the pool here http://uupool.cn/course/BTMASIC. Apparently you just need a Bytom address to get started. I don't know if this pool is legit or not but 40 BTM every 2-4 minutes is defiantly worth a shot. I have tried this pool two days back, But I cant create an account or Register. It will ask for cell phone number to send verification code and US number is not valid. Were you able to create an account? |
|
|
|
My b3 will be arriving this afternoon. I have no clue how to Solo or Pool mine with it. i never had a miner arrive where I did not have everything ready to go and up and running in 10mins. I think this one will be different.
Also can’t find a trusted exchange...
I'm in the same boat - mine will be arriving in a couple of hours and i have no idea what to do. I'm trying Coinex. They have a BTM wallet and can exchange to any other crypto. Having a BTM wallet is not going to help if we cant mine at this moment. We need a pool to mine first and none is available yet |
|
|
|
|
