Show Posts
Was anybody able to run Claymore 11.5 (or higher then v10) on 280x or 7970 cards? I'm trying for a week and no progres. I used ubuntu 16.04 server (desktop too) 4 or 8GB of ram, z270a and H110 chipset nothing helps (Amd drivers 17,50). When I switch to the 10.6 claymore everything works on the same machine on the same system.
When i run Claymore 11.5 the DAG file i not loading. Or it's loading for couple of minutes. Most of the times when miner starts I can see brake in ping responses from the rig. SSH hangs for a second or two and then connection is going back on and I can see something like that:
ETH: Authorized
Setting DAG epoch #175...
Setting DAG epoch #175 for GPU4
Create GPU buffer for GPU4
Setting DAG epoch #175 for GPU3
Setting DAG epoch #175 for GPU1
Setting DAG epoch #175 for GPU2
Create GPU buffer for GPU2
Setting DAG epoch #175 for GPU0
Create GPU buffer for GPU0
Create GPU buffer for GPU1
Create GPU buffer for GPU3
GPU0 t=43C fan=33%, GPU1 t=37C fan=33%, GPU2 t=39C fan=33%, GPU3 t=46C fan=33%, GPU4 t=47C fan=33%
ETH: 03/15/18-15:04:33 - New job from eth-eu1.nanopool.org:9999
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s
ETH: 03/15/18-15:04:33 - New job from eth-eu1.nanopool.org:9999
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s
Alaways 0.000 Mh/s. Then the Claymore restarts it self and so on. I tryed -ethi -oldkernels -asm -lidag -gser. Nothing helps. Too add my rig was powered by dell dps1200W server psu and now it's powered by 2880W server psu, rig consumes about 1100W.
Please help me.
When i run Claymore 11.5 the DAG file i not loading. Or it's loading for couple of minutes. Most of the times when miner starts I can see brake in ping responses from the rig. SSH hangs for a second or two and then connection is going back on and I can see something like that:
ETH: Authorized
Setting DAG epoch #175...
Setting DAG epoch #175 for GPU4
Create GPU buffer for GPU4
Setting DAG epoch #175 for GPU3
Setting DAG epoch #175 for GPU1
Setting DAG epoch #175 for GPU2
Create GPU buffer for GPU2
Setting DAG epoch #175 for GPU0
Create GPU buffer for GPU0
Create GPU buffer for GPU1
Create GPU buffer for GPU3
GPU0 t=43C fan=33%, GPU1 t=37C fan=33%, GPU2 t=39C fan=33%, GPU3 t=46C fan=33%, GPU4 t=47C fan=33%
ETH: 03/15/18-15:04:33 - New job from eth-eu1.nanopool.org:9999
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s
ETH: 03/15/18-15:04:33 - New job from eth-eu1.nanopool.org:9999
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s
Alaways 0.000 Mh/s. Then the Claymore restarts it self and so on. I tryed -ethi -oldkernels -asm -lidag -gser. Nothing helps. Too add my rig was powered by dell dps1200W server psu and now it's powered by 2880W server psu, rig consumes about 1100W.
Please help me.
Anytime I have had 0.000 show on my cards it is always a voltage problem, not enough juice going to the cards to properly mine, my required voltages slightly increased on a few cards since version 11 came around. No surprise since I mines faster. Increase the voltage on each card and see if that helps.
Currently running 6 rigs with 33 rx 580's, various card types and 4 MSI 1070's. Had to increase the voltage on some of my powercooler red dragon cards and one of my XFX cards, i believe the XFX card is more a riser issue with the voltage than the card itself
I did the benchmark of epok 1 on Claymore 11.5 on only one card with normal BIOS (non OC BIOS) and:
AMD Cards available: 1
GPU #0: Tahiti (AMD Radeon HD 7900 Series), 3060 MB available, 16 compute units (pci bus 1:0:0)
POOL/SOLO version
GPU #0: algorithm ASM 1 (old kernels)
No NVIDIA CUDA GPUs detected.
Total cards: 1
You can use "+" and "-" keys to achieve best ETH speed, see "FINE TUNING" section in Readme for details.
AMD ADL library not found.
BENCHMARK MODE!
You did not specify -dcri values directly, so they will be detected automatically
Automatic detection of best -dcri values started, please wait...
Setting DAG epoch #172...
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s
Current -dcri values: -dcri 30
Setting DAG epoch #172 for GPU0
Create GPU buffer for GPU0
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s
Current -dcri values: -dcri 30
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s
Current -dcri values: -dcri 30
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s
Current -dcri values: -dcri 30
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s
i useed this command to do this:
#!/bin/sh
export GPU_MAX_ALLOC_PERCENT=100
export GPU_FORCE_64BIT_PTR=1
export GPU_MAX_HEAP_SIZE=100
export GPU_USE_SYNC_OBJECTS=1
export GPU_MAX_ALLOC_PERCENT=100
export GPU_SINGLE_ALLOC_PERCENT=100
./ethdcrminer64 -benchmark 1 -mode 1 -oldkernels 1
