komodorowiec
Newbie
Offline
Activity: 2
Merit: 0
|
|
March 23, 2018, 03:48:59 PM |
|
Was anybody able to run Claymore 11.5 (or higher then v10) on 280x or 7970 cards? I'm trying for a week and no progres. I used ubuntu 16.04 server (desktop too) 4 or 8GB of ram, z270a and H110 chipset nothing helps (Amd drivers 17,50). When I switch to the 10.6 claymore everything works on the same machine on the same system.
When i run Claymore 11.5 the DAG file i not loading. Or it's loading for couple of minutes. Most of the times when miner starts I can see brake in ping responses from the rig. SSH hangs for a second or two and then connection is going back on and I can see something like that:
ETH: Authorized Setting DAG epoch #175... Setting DAG epoch #175 for GPU4 Create GPU buffer for GPU4 Setting DAG epoch #175 for GPU3 Setting DAG epoch #175 for GPU1 Setting DAG epoch #175 for GPU2 Create GPU buffer for GPU2 Setting DAG epoch #175 for GPU0 Create GPU buffer for GPU0 Create GPU buffer for GPU1 Create GPU buffer for GPU3 GPU0 t=43C fan=33%, GPU1 t=37C fan=33%, GPU2 t=39C fan=33%, GPU3 t=46C fan=33%, GPU4 t=47C fan=33% ETH: 03/15/18-15:04:33 - New job from eth-eu1.nanopool.org:9999 ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00 ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s ETH: 03/15/18-15:04:33 - New job from eth-eu1.nanopool.org:9999 ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00 ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s
Alaways 0.000 Mh/s. Then the Claymore restarts it self and so on. I tryed -ethi -oldkernels -asm -lidag -gser. Nothing helps. Too add my rig was powered by dell dps1200W server psu and now it's powered by 2880W server psu, rig consumes about 1100W.
Please help me.
|
|
|
|
|
|
|
"With e-currency based on cryptographic proof, without the need to
trust a third party middleman, money can be secure and transactions
effortless." -- Satoshi
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
|
minermel
Newbie
Offline
Activity: 1
Merit: 0
|
|
March 23, 2018, 04:01:53 PM |
|
Was anybody able to run Claymore 11.5 (or higher then v10) on 280x or 7970 cards? I'm trying for a week and no progres. I used ubuntu 16.04 server (desktop too) 4 or 8GB of ram, z270a and H110 chipset nothing helps (Amd drivers 17,50). When I switch to the 10.6 claymore everything works on the same machine on the same system.
When i run Claymore 11.5 the DAG file i not loading. Or it's loading for couple of minutes. Most of the times when miner starts I can see brake in ping responses from the rig. SSH hangs for a second or two and then connection is going back on and I can see something like that:
ETH: Authorized Setting DAG epoch #175... Setting DAG epoch #175 for GPU4 Create GPU buffer for GPU4 Setting DAG epoch #175 for GPU3 Setting DAG epoch #175 for GPU1 Setting DAG epoch #175 for GPU2 Create GPU buffer for GPU2 Setting DAG epoch #175 for GPU0 Create GPU buffer for GPU0 Create GPU buffer for GPU1 Create GPU buffer for GPU3 GPU0 t=43C fan=33%, GPU1 t=37C fan=33%, GPU2 t=39C fan=33%, GPU3 t=46C fan=33%, GPU4 t=47C fan=33% ETH: 03/15/18-15:04:33 - New job from eth-eu1.nanopool.org:9999 ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00 ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s ETH: 03/15/18-15:04:33 - New job from eth-eu1.nanopool.org:9999 ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00 ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s
Alaways 0.000 Mh/s. Then the Claymore restarts it self and so on. I tryed -ethi -oldkernels -asm -lidag -gser. Nothing helps. Too add my rig was powered by dell dps1200W server psu and now it's powered by 2880W server psu, rig consumes about 1100W.
Please help me.
Anytime I have had 0.000 show on my cards it is always a voltage problem, not enough juice going to the cards to properly mine, my required voltages slightly increased on a few cards since version 11 came around. No surprise since I mines faster. Increase the voltage on each card and see if that helps. Currently running 6 rigs with 33 rx 580's, various card types and 4 MSI 1070's. Had to increase the voltage on some of my powercooler red dragon cards and one of my XFX cards, i believe the XFX card is more a riser issue with the voltage than the card itself
|
|
|
|
komodorowiec
Newbie
Offline
Activity: 2
Merit: 0
|
|
March 23, 2018, 04:24:56 PM |
|
Was anybody able to run Claymore 11.5 (or higher then v10) on 280x or 7970 cards? I'm trying for a week and no progres. I used ubuntu 16.04 server (desktop too) 4 or 8GB of ram, z270a and H110 chipset nothing helps (Amd drivers 17,50). When I switch to the 10.6 claymore everything works on the same machine on the same system.
When i run Claymore 11.5 the DAG file i not loading. Or it's loading for couple of minutes. Most of the times when miner starts I can see brake in ping responses from the rig. SSH hangs for a second or two and then connection is going back on and I can see something like that:
ETH: Authorized Setting DAG epoch #175... Setting DAG epoch #175 for GPU4 Create GPU buffer for GPU4 Setting DAG epoch #175 for GPU3 Setting DAG epoch #175 for GPU1 Setting DAG epoch #175 for GPU2 Create GPU buffer for GPU2 Setting DAG epoch #175 for GPU0 Create GPU buffer for GPU0 Create GPU buffer for GPU1 Create GPU buffer for GPU3 GPU0 t=43C fan=33%, GPU1 t=37C fan=33%, GPU2 t=39C fan=33%, GPU3 t=46C fan=33%, GPU4 t=47C fan=33% ETH: 03/15/18-15:04:33 - New job from eth-eu1.nanopool.org:9999 ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00 ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s ETH: 03/15/18-15:04:33 - New job from eth-eu1.nanopool.org:9999 ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00 ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s
Alaways 0.000 Mh/s. Then the Claymore restarts it self and so on. I tryed -ethi -oldkernels -asm -lidag -gser. Nothing helps. Too add my rig was powered by dell dps1200W server psu and now it's powered by 2880W server psu, rig consumes about 1100W.
Please help me.
Anytime I have had 0.000 show on my cards it is always a voltage problem, not enough juice going to the cards to properly mine, my required voltages slightly increased on a few cards since version 11 came around. No surprise since I mines faster. Increase the voltage on each card and see if that helps. Currently running 6 rigs with 33 rx 580's, various card types and 4 MSI 1070's. Had to increase the voltage on some of my powercooler red dragon cards and one of my XFX cards, i believe the XFX card is more a riser issue with the voltage than the card itself I did the benchmark of epok 1 on Claymore 11.5 on only one card with normal BIOS (non OC BIOS) and: AMD Cards available: 1 GPU #0: Tahiti (AMD Radeon HD 7900 Series), 3060 MB available, 16 compute units (pci bus 1:0:0) POOL/SOLO version GPU #0: algorithm ASM 1 (old kernels) No NVIDIA CUDA GPUs detected. Total cards: 1 You can use "+" and "-" keys to achieve best ETH speed, see "FINE TUNING" section in Readme for details. AMD ADL library not found. BENCHMARK MODE! You did not specify -dcri values directly, so they will be detected automatically Automatic detection of best -dcri values started, please wait... Setting DAG epoch #172... ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00 ETH: GPU0 0.000 Mh/s Current -dcri values: -dcri 30 Setting DAG epoch #172 for GPU0 Create GPU buffer for GPU0 ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00 ETH: GPU0 0.000 Mh/s Current -dcri values: -dcri 30 ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00 ETH: GPU0 0.000 Mh/s Current -dcri values: -dcri 30 ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00 ETH: GPU0 0.000 Mh/s Current -dcri values: -dcri 30 ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00 ETH: GPU0 0.000 Mh/s i useed this command to do this: #!/bin/sh export GPU_MAX_ALLOC_PERCENT=100 export GPU_FORCE_64BIT_PTR=1 export GPU_MAX_HEAP_SIZE=100 export GPU_USE_SYNC_OBJECTS=1 export GPU_MAX_ALLOC_PERCENT=100 export GPU_SINGLE_ALLOC_PERCENT=100 ./ethdcrminer64 -benchmark 1 -mode 1 -oldkernels 1
|
|
|
|
dragonmike
|
|
March 23, 2018, 04:53:34 PM |
|
I am happy to report my hourly restarting issues have stopped as of 6 am this morning. Unexpected and unprovoked. Go figure.
Could it maybe, just maybe have had anything to do with devfee mining troubles?
...
|
|
|
|
leonix007
Sr. Member
Offline
Activity: 1008
Merit: 297
Grow with community
|
|
March 23, 2018, 04:54:20 PM |
|
It is not very useful solution for this, is there any settings to resolve this in a proper way? my config file is: -r 1 -retrydelay 5 -mport 0 -dcri 20 -altnum 1 -dcoin sia -mode 1 -dbg -1 -allcoins 1 Try to use -eres 0 Some folks able to solve this one https://bitcointalk.org/index.php?topic=3175701.0
|
|
|
|
Ursul0
|
|
March 23, 2018, 04:56:46 PM |
|
You have upto 10% incorrect calculated shares (third number after hashrate). That's ridiculous high! Very too much oced would i say. Should be 0 (or maybe ~0,1%).
thanks for reminding me to scan the logs for the culprits, lowering mem clocks should do the trick
|
|
|
|
bylevani
Newbie
Offline
Activity: 2
Merit: 0
|
|
March 23, 2018, 05:30:35 PM |
|
After a fresh instalation of win 7 sp1 64bit BAT file is crashing every time i start it Rig from 8 gtx 1080ti 4gb ram, 60ssd any idea how to fix this problem? thanks
|
|
|
|
ilmoro
Newbie
Offline
Activity: 6
Merit: 0
|
|
March 23, 2018, 05:32:34 PM |
|
Hi, from v.11.5: my first 580 fan goes 96% even if it is not needed. Till v.11.4 it goes to 55% as all others. Fix needed?
|
|
|
|
leonix007
Sr. Member
Offline
Activity: 1008
Merit: 297
Grow with community
|
|
March 23, 2018, 05:36:34 PM |
|
After a fresh instalation of win 7 sp1 64bit BAT file is crashing every time i start it Rig from 8 gtx 1080ti 4gb ram, 60ssd any idea how to fix this problem? thanks
post more information please. .bat file? PSU? Motherboard? Drivers? any errors?
|
|
|
|
ilmoro
Newbie
Offline
Activity: 6
Merit: 0
|
|
March 23, 2018, 05:39:04 PM |
|
post more information please.
.bat file? PSU? Motherboard? Drivers? any errors?
[/quote]
Hi and thanks but the message was just for developers. Everything worked fine since 11.4 so it´s something in the code. Obviously I just switched the two program as I usually do since several months and this time I discovered this error: the fan of my fist GPU works too much.
|
|
|
|
bylevani
Newbie
Offline
Activity: 2
Merit: 0
|
|
March 23, 2018, 05:48:30 PM |
|
After a fresh instalation of win 7 sp1 64bit BAT file is crashing every time i start it Rig from 8 gtx 1080ti 4gb ram, 60ssd any idea how to fix this problem? thanks
post more information please. .bat file? PSU? Motherboard? Drivers? any errors? start.bat file from "Claymore's Dual Ethereum+Decred_Siacoin_Lbry_Pascal_Blake2s_Keccak AMD+NVIDIA GPU Miner v11.5" PSU.. if you mean power supply unit, I have 2 of Dell 1400W Power Supply D1200E-S0 4V04J (DPS-1200MB A) and one standart for motherboard 700w motherboard TB250-BTC+ newes drivers from nvidia here is a problem i got errors from win 7 (crash errors like a program is stops and it will be close) when i build a rig and test it for a first time it was working perfect without crashing and errors but after reinstalling win 7 start.bat is crashing after 3-4 sec
|
|
|
|
bardacuda
|
|
March 23, 2018, 05:54:47 PM |
|
... 2. I have a few rigs on v11.5 and they are working for days until I restart miner to perform some new tests, but I always use non-overclocked cards and default bioses, I have to do it to exclude everything except miner in case of any problems. When you use miner on overclocked/unstable rig you cannot be sure that the reason of the problems is the miner, but of course you will blame it Try to reduce "-ethi" value, if it does not help you can use the version that works fine for you. I've had this miner running for over a month before till I shut it down on purpose for some maintenance, and that was with modded/undervolted cards. If you have instability the miner is probably not the culprit. Once in a while I will see a card report a hashrate a few Mh/s below normal but it's very brief and will only appear on one line of reporting. If I hit 's' after or wait for the next report it's already back to normal. I think most people just don't do proper stability testing after they start messing with clocks/volts/timings.
|
The future will rely on AI. SingularityNET lets anyone create, monetize, and use AI at scale. From the creators of Sophia the Robot.
|
|
|
tg88
Legendary
Offline
Activity: 2380
Merit: 1406
|
|
March 23, 2018, 06:00:43 PM |
|
I solved the instability of version 11.5 using the parameter - ethi 4
|
|
|
|
skablast
Member
Offline
Activity: 476
Merit: 19
|
|
March 23, 2018, 07:42:45 PM |
|
@bylevani.
Are you sure you have a 60 GB SSD with 8 GTX 1080 ti ?
you spent a lot and you saved on the ssd ?
Well, the virtual memory is supposed to be at least equal to the sum of the GPUs memory.
And windows10 take minimum 20 GB..
|
|
|
|
AndreasSantonio
Newbie
Offline
Activity: 34
Merit: 0
|
|
March 23, 2018, 07:58:20 PM |
|
There are problems with stability on nvidia card in 11.5. Version 11.1 work good.
|
|
|
|
derselben
Newbie
Offline
Activity: 22
Merit: 0
|
|
March 23, 2018, 07:59:24 PM |
|
It is not very useful solution for this, is there any settings to resolve this in a proper way? my config file is: -r 1 -retrydelay 5 -mport 0 -dcri 20 -altnum 1 -dcoin sia -mode 1 -dbg -1 -allcoins 1 Try to use -eres 0 Some folks able to solve this one https://bitcointalk.org/index.php?topic=3175701.0Hey! That did the magic! Thanks!
|
|
|
|
big al
Member
Offline
Activity: 140
Merit: 10
|
|
March 23, 2018, 09:27:42 PM |
|
Looks like keccak is dying pretty quick.
|
|
|
|
leonix007
Sr. Member
Offline
Activity: 1008
Merit: 297
Grow with community
|
|
March 24, 2018, 12:48:26 AM |
|
After a fresh instalation of win 7 sp1 64bit BAT file is crashing every time i start it Rig from 8 gtx 1080ti 4gb ram, 60ssd any idea how to fix this problem? thanks
post more information please. .bat file? PSU? Motherboard? Drivers? any errors? start.bat file from "Claymore's Dual Ethereum+Decred_Siacoin_Lbry_Pascal_Blake2s_Keccak AMD+NVIDIA GPU Miner v11.5" PSU.. if you mean power supply unit, I have 2 of Dell 1400W Power Supply D1200E-S0 4V04J (DPS-1200MB A) and one standart for motherboard 700w motherboard TB250-BTC+ newes drivers from nvidia here is a problem i got errors from win 7 (crash errors like a program is stops and it will be close) when i build a rig and test it for a first time it was working perfect without crashing and errors but after reinstalling win 7 start.bat is crashing after 3-4 sec how about your command line in start.bat and config file? for isolation try other lower version of claymore like 11.4
|
|
|
|
Ursul0
|
|
March 24, 2018, 05:59:10 AM |
|
for isolation try other lower version of claymore like 11.4
as far as I know 11.4 and 11.5 is essentially the same version (11.5 has one new option - you can choose to use older AMD kernels)
|
|
|
|
RooiWillie
Newbie
Offline
Activity: 14
Merit: 0
|
|
March 24, 2018, 06:01:45 AM |
|
Hey guys, have any of you had an issue with V11.5, where when connection was lost to the pool, the miner resumed when the connection was restored, but at a lower hashrate?
At ~1:45am this morning, my miner lost connection, and when the connection was restored, the AMD cards mined at less than 50% of their usual hash rate. Strangely though, the NVidia cards on the rig resumed at their normal hashrate.
AMD Cards: Powercolor RX470, MSI Armor RX480 NVidia Cards: 2 x GTX 1050Ti
The log file:
01:43:23:567 15b0 ETH - Total Speed: 86.369 Mh/s, Total Shares: 913, Rejected: 1, Time: 12:03 01:43:23:567 15b0 ETH: GPU0 28.862 Mh/s, GPU1 29.061 Mh/s, GPU2 14.241 Mh/s, GPU3 14.206 Mh/s 01:43:24:223 15b0 buf: {"id":6,"jsonrpc":"2.0","result":true} 01:43:27:285 15b0 ETH: checking pool connection... 01:43:27:285 15b0 sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"} 01:43:27:348 1370 checked ETH share on CPU, spent 5ms 01:43:27:348 1370 sent: {"worker":"Frankenstein","id":12,"method":"eth_submitWork","params": #RooiWillie - Line shortened for readability 01:43:27:348 1370 ETH: put share nonce 95e143d80337a242 01:43:27:363 15b0 ETH: 03/24/18-01:43:27 - SHARE FOUND - (GPU 2) 01:43:27:504 15b0 buf: {"id":3,"jsonrpc":"2.0","result": #RooiWillie - Line shortened for readability 01:43:27:692 15b0 buf: {"id":12,"jsonrpc":"2.0","result":true} 01:43:27:692 15b0 ETH: Share accepted (343 ms)! 01:43:37:301 15b0 ETH: checking pool connection... 01:43:37:301 15b0 sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"} 01:43:37:520 15b0 buf: {"id":3,"jsonrpc":"2.0","result": #RooiWillie - Line shortened for readability 01:43:43:363 15b0 sent: {"id":6,"worker":"Frankenstein","jsonrpc":"2.0","method":"eth_submitHashrate","params": #RooiWillie - Line shortened for readability 01:43:43:582 15b0 buf: {"id":6,"jsonrpc":"2.0","result":true}
#RooiWillie - Removed a few log entries to make it more readable...
01:45:29:770 15b0 ETH: checking pool connection... 01:45:29:770 15b0 sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"} 01:45:29:989 15b0 buf: {"id":3,"jsonrpc":"2.0","result": #RooiWillie - Line shortened for readability 01:45:36:645 15b0 buf: {"id":0,"jsonrpc":"2.0","result": #RooiWillie - Line shortened for readability 01:45:36:645 15b0 remove first packet 248 01:45:36:645 15b0 ETH: 03/24/18-01:45:36 - New job from eu1.ethermine.org:5555 01:45:36:645 15b0 target: 0x0000000112e0be82 (diff: 4000MH), epoch 176(2.37GB) 01:45:36:676 15b0 ETH - Total Speed: 56.436 Mh/s, Total Shares: 914, Rejected: 1, Time: 12:05 01:45:36:676 15b0 ETH: GPU0 12.901 Mh/s, GPU1 15.053 Mh/s, GPU2 14.250 Mh/s, GPU3 14.232 Mh/s
|
|
|
|
|