komodorowiec
Newbie
Offline
Activity: 2
Merit: 0
|
|
March 23, 2018, 03:48:59 PM |
|
Was anybody able to run Claymore 11.5 (or higher then v10) on 280x or 7970 cards? I'm trying for a week and no progres. I used ubuntu 16.04 server (desktop too) 4 or 8GB of ram, z270a and H110 chipset nothing helps (Amd drivers 17,50). When I switch to the 10.6 claymore everything works on the same machine on the same system.
When i run Claymore 11.5 the DAG file i not loading. Or it's loading for couple of minutes. Most of the times when miner starts I can see brake in ping responses from the rig. SSH hangs for a second or two and then connection is going back on and I can see something like that:
ETH: Authorized Setting DAG epoch #175... Setting DAG epoch #175 for GPU4 Create GPU buffer for GPU4 Setting DAG epoch #175 for GPU3 Setting DAG epoch #175 for GPU1 Setting DAG epoch #175 for GPU2 Create GPU buffer for GPU2 Setting DAG epoch #175 for GPU0 Create GPU buffer for GPU0 Create GPU buffer for GPU1 Create GPU buffer for GPU3 GPU0 t=43C fan=33%, GPU1 t=37C fan=33%, GPU2 t=39C fan=33%, GPU3 t=46C fan=33%, GPU4 t=47C fan=33% ETH: 03/15/18-15:04:33 - New job from eth-eu1.nanopool.org:9999 ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00 ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s ETH: 03/15/18-15:04:33 - New job from eth-eu1.nanopool.org:9999 ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00 ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s
Alaways 0.000 Mh/s. Then the Claymore restarts it self and so on. I tryed -ethi -oldkernels -asm -lidag -gser. Nothing helps. Too add my rig was powered by dell dps1200W server psu and now it's powered by 2880W server psu, rig consumes about 1100W.
Please help me.
|
|
|
|
|
|
|
In order to get the maximum amount of activity points possible, you just need to post once per day on average. Skipping days is OK as long as you maintain the average.
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
|
minermel
Newbie
Offline
Activity: 1
Merit: 0
|
|
March 23, 2018, 04:01:53 PM |
|
Was anybody able to run Claymore 11.5 (or higher then v10) on 280x or 7970 cards? I'm trying for a week and no progres. I used ubuntu 16.04 server (desktop too) 4 or 8GB of ram, z270a and H110 chipset nothing helps (Amd drivers 17,50). When I switch to the 10.6 claymore everything works on the same machine on the same system.
When i run Claymore 11.5 the DAG file i not loading. Or it's loading for couple of minutes. Most of the times when miner starts I can see brake in ping responses from the rig. SSH hangs for a second or two and then connection is going back on and I can see something like that:
ETH: Authorized Setting DAG epoch #175... Setting DAG epoch #175 for GPU4 Create GPU buffer for GPU4 Setting DAG epoch #175 for GPU3 Setting DAG epoch #175 for GPU1 Setting DAG epoch #175 for GPU2 Create GPU buffer for GPU2 Setting DAG epoch #175 for GPU0 Create GPU buffer for GPU0 Create GPU buffer for GPU1 Create GPU buffer for GPU3 GPU0 t=43C fan=33%, GPU1 t=37C fan=33%, GPU2 t=39C fan=33%, GPU3 t=46C fan=33%, GPU4 t=47C fan=33% ETH: 03/15/18-15:04:33 - New job from eth-eu1.nanopool.org:9999 ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00 ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s ETH: 03/15/18-15:04:33 - New job from eth-eu1.nanopool.org:9999 ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00 ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s
Alaways 0.000 Mh/s. Then the Claymore restarts it self and so on. I tryed -ethi -oldkernels -asm -lidag -gser. Nothing helps. Too add my rig was powered by dell dps1200W server psu and now it's powered by 2880W server psu, rig consumes about 1100W.
Please help me.
Anytime I have had 0.000 show on my cards it is always a voltage problem, not enough juice going to the cards to properly mine, my required voltages slightly increased on a few cards since version 11 came around. No surprise since I mines faster. Increase the voltage on each card and see if that helps. Currently running 6 rigs with 33 rx 580's, various card types and 4 MSI 1070's. Had to increase the voltage on some of my powercooler red dragon cards and one of my XFX cards, i believe the XFX card is more a riser issue with the voltage than the card itself
|
|
|
|
komodorowiec
Newbie
Offline
Activity: 2
Merit: 0
|
|
March 23, 2018, 04:24:56 PM |
|
Was anybody able to run Claymore 11.5 (or higher then v10) on 280x or 7970 cards? I'm trying for a week and no progres. I used ubuntu 16.04 server (desktop too) 4 or 8GB of ram, z270a and H110 chipset nothing helps (Amd drivers 17,50). When I switch to the 10.6 claymore everything works on the same machine on the same system.
When i run Claymore 11.5 the DAG file i not loading. Or it's loading for couple of minutes. Most of the times when miner starts I can see brake in ping responses from the rig. SSH hangs for a second or two and then connection is going back on and I can see something like that:
ETH: Authorized Setting DAG epoch #175... Setting DAG epoch #175 for GPU4 Create GPU buffer for GPU4 Setting DAG epoch #175 for GPU3 Setting DAG epoch #175 for GPU1 Setting DAG epoch #175 for GPU2 Create GPU buffer for GPU2 Setting DAG epoch #175 for GPU0 Create GPU buffer for GPU0 Create GPU buffer for GPU1 Create GPU buffer for GPU3 GPU0 t=43C fan=33%, GPU1 t=37C fan=33%, GPU2 t=39C fan=33%, GPU3 t=46C fan=33%, GPU4 t=47C fan=33% ETH: 03/15/18-15:04:33 - New job from eth-eu1.nanopool.org:9999 ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00 ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s ETH: 03/15/18-15:04:33 - New job from eth-eu1.nanopool.org:9999 ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00 ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s
Alaways 0.000 Mh/s. Then the Claymore restarts it self and so on. I tryed -ethi -oldkernels -asm -lidag -gser. Nothing helps. Too add my rig was powered by dell dps1200W server psu and now it's powered by 2880W server psu, rig consumes about 1100W.
Please help me.
Anytime I have had 0.000 show on my cards it is always a voltage problem, not enough juice going to the cards to properly mine, my required voltages slightly increased on a few cards since version 11 came around. No surprise since I mines faster. Increase the voltage on each card and see if that helps. Currently running 6 rigs with 33 rx 580's, various card types and 4 MSI 1070's. Had to increase the voltage on some of my powercooler red dragon cards and one of my XFX cards, i believe the XFX card is more a riser issue with the voltage than the card itself I did the benchmark of epok 1 on Claymore 11.5 on only one card with normal BIOS (non OC BIOS) and: AMD Cards available: 1 GPU #0: Tahiti (AMD Radeon HD 7900 Series), 3060 MB available, 16 compute units (pci bus 1:0:0) POOL/SOLO version GPU #0: algorithm ASM 1 (old kernels) No NVIDIA CUDA GPUs detected. Total cards: 1 You can use "+" and "-" keys to achieve best ETH speed, see "FINE TUNING" section in Readme for details. AMD ADL library not found. BENCHMARK MODE! You did not specify -dcri values directly, so they will be detected automatically Automatic detection of best -dcri values started, please wait... Setting DAG epoch #172... ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00 ETH: GPU0 0.000 Mh/s Current -dcri values: -dcri 30 Setting DAG epoch #172 for GPU0 Create GPU buffer for GPU0 ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00 ETH: GPU0 0.000 Mh/s Current -dcri values: -dcri 30 ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00 ETH: GPU0 0.000 Mh/s Current -dcri values: -dcri 30 ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00 ETH: GPU0 0.000 Mh/s Current -dcri values: -dcri 30 ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00 ETH: GPU0 0.000 Mh/s i useed this command to do this: #!/bin/sh export GPU_MAX_ALLOC_PERCENT=100 export GPU_FORCE_64BIT_PTR=1 export GPU_MAX_HEAP_SIZE=100 export GPU_USE_SYNC_OBJECTS=1 export GPU_MAX_ALLOC_PERCENT=100 export GPU_SINGLE_ALLOC_PERCENT=100 ./ethdcrminer64 -benchmark 1 -mode 1 -oldkernels 1
|
|
|
|
dragonmike
|
|
March 23, 2018, 04:53:34 PM |
|
I am happy to report my hourly restarting issues have stopped as of 6 am this morning. Unexpected and unprovoked. Go figure.
Could it maybe, just maybe have had anything to do with devfee mining troubles?
...
|
|
|
|
leonix007
Sr. Member
Offline
Activity: 1008
Merit: 297
Grow with community
|
|
March 23, 2018, 04:54:20 PM |
|
It is not very useful solution for this, is there any settings to resolve this in a proper way? my config file is: -r 1 -retrydelay 5 -mport 0 -dcri 20 -altnum 1 -dcoin sia -mode 1 -dbg -1 -allcoins 1 Try to use -eres 0 Some folks able to solve this one https://bitcointalk.org/index.php?topic=3175701.0
|
|
|
|
Ursul0
|
|
March 23, 2018, 04:56:46 PM |
|
You have upto 10% incorrect calculated shares (third number after hashrate). That's ridiculous high! Very too much oced would i say. Should be 0 (or maybe ~0,1%).
thanks for reminding me to scan the logs for the culprits, lowering mem clocks should do the trick
|
|
|
|
bylevani
Newbie
Offline
Activity: 2
Merit: 0
|
|
March 23, 2018, 05:30:35 PM |
|
After a fresh instalation of win 7 sp1 64bit BAT file is crashing every time i start it Rig from 8 gtx 1080ti 4gb ram, 60ssd any idea how to fix this problem? thanks
|
|
|
|
ilmoro
Newbie
Offline
Activity: 6
Merit: 0
|
|
March 23, 2018, 05:32:34 PM |
|
Hi, from v.11.5: my first 580 fan goes 96% even if it is not needed. Till v.11.4 it goes to 55% as all others. Fix needed?
|
|
|
|
leonix007
Sr. Member
Offline
Activity: 1008
Merit: 297
Grow with community
|
|
March 23, 2018, 05:36:34 PM |
|
After a fresh instalation of win 7 sp1 64bit BAT file is crashing every time i start it Rig from 8 gtx 1080ti 4gb ram, 60ssd any idea how to fix this problem? thanks
post more information please. .bat file? PSU? Motherboard? Drivers? any errors?
|
|
|
|
ilmoro
Newbie
Offline
Activity: 6
Merit: 0
|
|
March 23, 2018, 05:39:04 PM |
|
post more information please.
.bat file? PSU? Motherboard? Drivers? any errors?
[/quote]
Hi and thanks but the message was just for developers. Everything worked fine since 11.4 so it´s something in the code. Obviously I just switched the two program as I usually do since several months and this time I discovered this error: the fan of my fist GPU works too much.
|
|
|
|
bylevani
Newbie
Offline
Activity: 2
Merit: 0
|
|
March 23, 2018, 05:48:30 PM |
|
After a fresh instalation of win 7 sp1 64bit BAT file is crashing every time i start it Rig from 8 gtx 1080ti 4gb ram, 60ssd any idea how to fix this problem? thanks
post more information please. .bat file? PSU? Motherboard? Drivers? any errors? start.bat file from "Claymore's Dual Ethereum+Decred_Siacoin_Lbry_Pascal_Blake2s_Keccak AMD+NVIDIA GPU Miner v11.5" PSU.. if you mean power supply unit, I have 2 of Dell 1400W Power Supply D1200E-S0 4V04J (DPS-1200MB A) and one standart for motherboard 700w motherboard TB250-BTC+ newes drivers from nvidia here is a problem i got errors from win 7 (crash errors like a program is stops and it will be close) when i build a rig and test it for a first time it was working perfect without crashing and errors but after reinstalling win 7 start.bat is crashing after 3-4 sec
|
|
|
|
bardacuda
|
|
March 23, 2018, 05:54:47 PM |
|
... 2. I have a few rigs on v11.5 and they are working for days until I restart miner to perform some new tests, but I always use non-overclocked cards and default bioses, I have to do it to exclude everything except miner in case of any problems. When you use miner on overclocked/unstable rig you cannot be sure that the reason of the problems is the miner, but of course you will blame it Try to reduce "-ethi" value, if it does not help you can use the version that works fine for you. I've had this miner running for over a month before till I shut it down on purpose for some maintenance, and that was with modded/undervolted cards. If you have instability the miner is probably not the culprit. Once in a while I will see a card report a hashrate a few Mh/s below normal but it's very brief and will only appear on one line of reporting. If I hit 's' after or wait for the next report it's already back to normal. I think most people just don't do proper stability testing after they start messing with clocks/volts/timings.
|
The future will rely on AI. SingularityNET lets anyone create, monetize, and use AI at scale. From the creators of Sophia the Robot.
|
|
|
tg88
Legendary
Offline
Activity: 2380
Merit: 1405
|
|
March 23, 2018, 06:00:43 PM |
|
I solved the instability of version 11.5 using the parameter - ethi 4
|
.
| ▄██████████████ ███████████████ ███████████████ █████████████▀░ ███████████▀▄░█ ██████████░███░ ███████▀▀░▀▀█▀▀ █████▀░░░░░░░▀▄ █████░░░░░░░░░█ █████▄░░░░░░░▄▀ ███████▄▄▄▄▄███ ███████████████ ▀██████████████ | ▄██████████████ ███████████████ ████████████▀██ █████████▀▀░░░▀ ████████░░░░░░░ ██████░░░░░░░░░ █████░░░░░░░░░░ █████░░░░░░░░░░ ██████▄░░░░▄▄▄░ █████████▀▀░░░▀ ████████▄▄▄▄▄▄▄ ███████████████ ▀██████████████ | ▄██████████████ ███████████████ ██████████▀▀▀▀▀ ███████▀░▀█▄░░░ ██████░░░░░█▄░▄ █████░░▄▄▄▄▄██▀ █████▀▀▀░░░░▄█▄ █████░░░▄▄█▀▀░█ ██████▄█▀▀░░░░▀ ███████▄▄░░░░░░ ██████████▄▄▄▄▄ ███████████████ ▀██████████████ | ▄████████████████████████▄ ██████████████████████████ █████████████░████████████ ████████████▀▄████████████ █████▀▀░░░░░░░░░░░░▀▀█████ ████▀░░░░░░░░░░░░░░░░▀████ ████░░░██░██░░░░█░░░░░████ ████░░░▄▄▀▄▄░░▀▀▄▀▀░░░████ ████▄░░▀▀░▀▀░░░░▀░░░░▄████ █████▄▄░░░░░░░░░░░░▄▄█████ ██████████████████████████ ██████████████████████████ ▀████████████████████████▀ | .
|
|
|
|
skablast
Member
Offline
Activity: 476
Merit: 19
|
|
March 23, 2018, 07:42:45 PM |
|
@bylevani.
Are you sure you have a 60 GB SSD with 8 GTX 1080 ti ?
you spent a lot and you saved on the ssd ?
Well, the virtual memory is supposed to be at least equal to the sum of the GPUs memory.
And windows10 take minimum 20 GB..
|
|
|
|
AndreasSantonio
Newbie
Offline
Activity: 34
Merit: 0
|
|
March 23, 2018, 07:58:20 PM |
|
There are problems with stability on nvidia card in 11.5. Version 11.1 work good.
|
|
|
|
derselben
Newbie
Offline
Activity: 22
Merit: 0
|
|
March 23, 2018, 07:59:24 PM |
|
It is not very useful solution for this, is there any settings to resolve this in a proper way? my config file is: -r 1 -retrydelay 5 -mport 0 -dcri 20 -altnum 1 -dcoin sia -mode 1 -dbg -1 -allcoins 1 Try to use -eres 0 Some folks able to solve this one https://bitcointalk.org/index.php?topic=3175701.0Hey! That did the magic! Thanks!
|
|
|
|
big al
Member
Offline
Activity: 140
Merit: 10
|
|
March 23, 2018, 09:27:42 PM |
|
Looks like keccak is dying pretty quick.
|
|
|
|
leonix007
Sr. Member
Offline
Activity: 1008
Merit: 297
Grow with community
|
|
March 24, 2018, 12:48:26 AM |
|
After a fresh instalation of win 7 sp1 64bit BAT file is crashing every time i start it Rig from 8 gtx 1080ti 4gb ram, 60ssd any idea how to fix this problem? thanks
post more information please. .bat file? PSU? Motherboard? Drivers? any errors? start.bat file from "Claymore's Dual Ethereum+Decred_Siacoin_Lbry_Pascal_Blake2s_Keccak AMD+NVIDIA GPU Miner v11.5" PSU.. if you mean power supply unit, I have 2 of Dell 1400W Power Supply D1200E-S0 4V04J (DPS-1200MB A) and one standart for motherboard 700w motherboard TB250-BTC+ newes drivers from nvidia here is a problem i got errors from win 7 (crash errors like a program is stops and it will be close) when i build a rig and test it for a first time it was working perfect without crashing and errors but after reinstalling win 7 start.bat is crashing after 3-4 sec how about your command line in start.bat and config file? for isolation try other lower version of claymore like 11.4
|
|
|
|
Ursul0
|
|
March 24, 2018, 05:59:10 AM |
|
for isolation try other lower version of claymore like 11.4
as far as I know 11.4 and 11.5 is essentially the same version (11.5 has one new option - you can choose to use older AMD kernels)
|
|
|
|
RooiWillie
Newbie
Offline
Activity: 14
Merit: 0
|
|
March 24, 2018, 06:01:45 AM |
|
Hey guys, have any of you had an issue with V11.5, where when connection was lost to the pool, the miner resumed when the connection was restored, but at a lower hashrate?
At ~1:45am this morning, my miner lost connection, and when the connection was restored, the AMD cards mined at less than 50% of their usual hash rate. Strangely though, the NVidia cards on the rig resumed at their normal hashrate.
AMD Cards: Powercolor RX470, MSI Armor RX480 NVidia Cards: 2 x GTX 1050Ti
The log file:
01:43:23:567 15b0 ETH - Total Speed: 86.369 Mh/s, Total Shares: 913, Rejected: 1, Time: 12:03 01:43:23:567 15b0 ETH: GPU0 28.862 Mh/s, GPU1 29.061 Mh/s, GPU2 14.241 Mh/s, GPU3 14.206 Mh/s 01:43:24:223 15b0 buf: {"id":6,"jsonrpc":"2.0","result":true} 01:43:27:285 15b0 ETH: checking pool connection... 01:43:27:285 15b0 sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"} 01:43:27:348 1370 checked ETH share on CPU, spent 5ms 01:43:27:348 1370 sent: {"worker":"Frankenstein","id":12,"method":"eth_submitWork","params": #RooiWillie - Line shortened for readability 01:43:27:348 1370 ETH: put share nonce 95e143d80337a242 01:43:27:363 15b0 ETH: 03/24/18-01:43:27 - SHARE FOUND - (GPU 2) 01:43:27:504 15b0 buf: {"id":3,"jsonrpc":"2.0","result": #RooiWillie - Line shortened for readability 01:43:27:692 15b0 buf: {"id":12,"jsonrpc":"2.0","result":true} 01:43:27:692 15b0 ETH: Share accepted (343 ms)! 01:43:37:301 15b0 ETH: checking pool connection... 01:43:37:301 15b0 sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"} 01:43:37:520 15b0 buf: {"id":3,"jsonrpc":"2.0","result": #RooiWillie - Line shortened for readability 01:43:43:363 15b0 sent: {"id":6,"worker":"Frankenstein","jsonrpc":"2.0","method":"eth_submitHashrate","params": #RooiWillie - Line shortened for readability 01:43:43:582 15b0 buf: {"id":6,"jsonrpc":"2.0","result":true}
#RooiWillie - Removed a few log entries to make it more readable...
01:45:29:770 15b0 ETH: checking pool connection... 01:45:29:770 15b0 sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"} 01:45:29:989 15b0 buf: {"id":3,"jsonrpc":"2.0","result": #RooiWillie - Line shortened for readability 01:45:36:645 15b0 buf: {"id":0,"jsonrpc":"2.0","result": #RooiWillie - Line shortened for readability 01:45:36:645 15b0 remove first packet 248 01:45:36:645 15b0 ETH: 03/24/18-01:45:36 - New job from eu1.ethermine.org:5555 01:45:36:645 15b0 target: 0x0000000112e0be82 (diff: 4000MH), epoch 176(2.37GB) 01:45:36:676 15b0 ETH - Total Speed: 56.436 Mh/s, Total Shares: 914, Rejected: 1, Time: 12:05 01:45:36:676 15b0 ETH: GPU0 12.901 Mh/s, GPU1 15.053 Mh/s, GPU2 14.250 Mh/s, GPU3 14.232 Mh/s
|
|
|
|
|