 Show Posts
|
|
Pages: [1] 2 »
|
Just withdrew a whopping .1 in Dogecoin. Looks like the withdrawal limit resets after a successful withdrawal  |
|
|
|
It looks like the withdrawal limit is a "Daily" thing. As I mentioned I was able to withdraw a whopping 0.13 successfully last night. I just checked again and my limit was increased to 0.16 which I just withdrew a minute ago. It again went directly into a completed status and awaiting it to arrive in my wallet. Again nothing to really get too excited about, but it's nice to be able to pull anything out. Trying to get out as much as I can.
Looks like mine is increasing every day as well. By the looks of it I will have to wait one more day before I can draw anything out. Then I'm getting out what I can whilst I still can! |
|
|
|
At least I didn't lose too much (I was using money I could afford to lose anyway). Spent 314.90 Return 102.40 Loss 212.50 Owing 64.32 (currently) Will probably never see the owing now It was one of the most clever BTC ponzi schemes to date. They had their own software, a stratum server, and return on investment (plus profits) for a number of people. If it sounds too good to be true ... it probably is! |
|
|
|
|
Just a cautionary tale here...solo mining with 180Khs returns about $1/Day. I purchased a 24Hr 300Mhs contract pointed it at the pool...$5.00 in 24Hrs something not right there it should have been a great deal more. Cryptopay not working for nearly a week now. At the end of 10 Day demo today approx 100% ROI. Stratum server is not working today and emails to support have (so far) gone unanswered. If it sounds too good to be true...it probably is.
|
|
|
|
|
Anyone willing to send me 1 Burstcoin so I can use my wallet? Will send right back....will PM my wallet details
Thanks in advance
***Edit
Have received and repaid 25 Burst
|
|
|
|
Is there some problem with the pool right now?
Had high rejects on eu.wafflepool.com (Job not found errors) switched to useast and it's all good I'm getting 49.8% rejects on scrypt from yesterday, and moving from eu. to useast. did not change anything.  Same here for X11. I was getting the "Job not Found" errors and wafflepoolmonitor was showing double my hash rate. I must be one of the lucky ones as moving to USEast has sorted it for now. Just switched back to eu.wafflepool and all is working now |
|
|
|
Is there some problem with the pool right now?
Had high rejects on eu.wafflepool.com (Job not found errors) switched to useast and it's all good I'm getting 49.8% rejects on scrypt from yesterday, and moving from eu. to useast. did not change anything. Same here for X11. I was getting the "Job not Found" errors and wafflepoolmonitor was showing double my hash rate. I must be one of the lucky ones as moving to USEast has sorted it for now. |
|
|
|
Is there some problem with the pool right now?
Had high rejects on eu.wafflepool.com (Job not found errors) switched to useast and it's all good |
|
|
|
Stats seem broken.
They are mining, but no info on the pool page. This is a rig that has been going for a while with no problems on this pool so far.
I have the same problem. Hourly hash rate seems to be working as does Immature, Unexchanged, Ready For Payout and Total Expected but all other stats not working (using eu Clevermining). |
|
|
|
Rejects should be fixed. We had some issues with one of our hosts (first time we've had a host issue) where connections to the network from EU and (only one of) USEast servers would keep dropping, so the coindaemons were getting out of sync and causing some issues. Everything should be fixed, and I'm really sorry for the degraded performance.
Looks like it's fixed now....rejects back to a "normal" level now. Thanks PoolWaffle we do appreciate all your hard work behind the scenes  |
|
|
|
Getting loads of Job Not Found errors on my miners and WafflepoolMonitor shows 2x Hashrate? I had to move to another pool I prefer WafflePool for mining but with the low coin prices and high cost of electricity I had to go where mining is stable. Anyone else having the same problem? |
|
|
|
|
Just wasted 1 day for .018 which I cannot get paid out SCAM!!!!!!
Edit:
Payout button is no longer working ... was working up until yesterday.
|
|
|
|
Hi, I have upgraded my WiiBox with the latest V3 firmware (LAG3355_12-RC10g), but now i lost SSH access, is possible to resume SSH access?
Thanks in advance W_M
The new firmware has ssh, console and failsafe mode disabled there's no way to get in anymore. |
|
|
|
And now it's 504 Gateway Error via CloudFlare!
Down for me as well  |
|
|
|
Nothing has gone into Ready for Payout for almost a day now.
Yeah I can't seem to see anything go under ready for payout as well , we would to know what's going on ?!! Everyone mining is at 0.0000000 Ready For Payout nothing has been exchanged since yesterday. |
|
|
|
|
Have been mining on and off on Clevermining for the past 3 months. I have an unexchanged balance of 0.01723659 and a ready for payout of 0.00295685 is there something wrong with the exchange today/yesterday? Other than that the VARDIFF is brilliant and my rejects have dropped off significantly.
|
|
|
|
Have upgraded to V10c and I like it esp the miner log screen Problem is with my VARDIFF pool coinshift.com the LA connects to it gets work and hashes at difficulty 256 for a few minutes but once the difficulty jumps it jumps to 3200 and stays there With CGMiner my diffs change up and down proportional to shares/sec. Is this a case of another pool that the LA doesn't like? It changes to whatever diff the stratum pool is at, this was done to reduce the reject rate on a number of pools, primarily Ghash.io, because when the stratum tells you to change the diff but doesn't assign a new job, it's causing a flood of rejects. We're trying to keep the reject rate as low as possible, even when that means that some pools may not work properly as a result of that, there are many pools you can choose from. OK, thank you. I'm looking forward to the improvements you are making in future I shall try some different pools. |
|
|
|
Have upgraded to V10c and I like it esp the miner log screen Problem is with my VARDIFF pool coinshift.com the LA connects to it gets work and hashes at difficulty 256 for a few minutes but once the difficulty jumps it jumps to 3200 and stays there With CGMiner my diffs change up and down proportional to shares/sec. Is this a case of another pool that the LA doesn't like? |
|
|
|
Maybe it's just me but the LightningAsic controller won't go much past 850 clock for me. The hash rate on the L.A. Controller is all over the shop in the U.I. so I'm using the hash rate at my pool (CoinShift) and it is reported in the 2900-3000 KHs range. Using CGMiner with the gridseed drivers and individual clock settings from https://github.com/girnyau/cgminer-gc3355 I'm getting in the 3900-4000Khs range with an inconsequential number of hardware errors. I will at some point set up individual frequencies on the miners and see what happens. Don't want to lose 1Mhs for any extended length of time whilst trying for ROI on these units. EDIT: Just set the clock rates in L.A. Controller to be the same as the ones in CGminer and I'm getting 2700-2900 KHs |
|
|
|
Hi,
as you have seen I've some LA devices running on several frequencies. The other half of my devices is running on standard frequencies, controlled by the standard controller. When I came home today I realized, that 5 devices stopped working. They are not blinking any more. I plugged out, in again and again.
Nothing happens to them any more.
I had the same issue on one device approx 30 minutes after start up of the system. It had something burned next to the usb connector on the board. I'm now missing a total of 6 devices out of 20 :-/ Jack promised to send me one on replacement two weeks ago. Now I'm at six and don't have the first one yet. Any one knows how to claim the warranty with Jack?? *damn it* ROI is running away.
Any one else facing those problems??? Any one able to repair that???
BR
Martin
Are all 5 coming off the same PSU or 1/2 of a USB Hub? I had a similar problem where 5 of my miners died (still had the flashing lights but no hashing). Flashing lights powered by USB. Fans/hashing powered by PSU. I traced it down to a bad PSU which Jack replaced no charge. I was also able to order a 30A 12V psu (for LED lighting) from EBay for £16 (looks exactly like the L.A. PSU) so I now have a backup PSU. yes, they are all coming off from 1/2 of a USB hub. I still use the same PSU... the remaining devices work just fine - also on the burned ones the fans are rotating like always... seems like just USB connection is gone. I tried to exchange the usb ports on the hub. Finally the units themselves seem to be the problem here. Jack now asked me to send them back for repair which is of course very nice from him but I'm scared it will take weeks to get them back working. If it helps it took 13 days from the time I told Jack about the blown PSU to receiving the replacement. Told him on the 12th of March and had the PSU in my hands on the 25th. You might want to check out that USB hub though and make sure the 1/2 that has the blown miners on it still works. |
|
|
|
|
