[POOL][Scrypt][Scrypt-N][X11] Profit switching pool - wafflepool.com

[m0narch]

Not sure if anyone cares, but Feathercoin hard forked and uses Neoscrypt now. Figured I'd mention it here just in case it's still mined by this pool once in a while.

https://bitcointalk.org/index.php?topic=821738.0

[ryukamiho]

hi,

didnt received my weekly payment this week.

something went wrong?

[Corenin]

hi,

didnt received my weekly payment this week.

something went wrong?

There is a minimum payout requirement..

[chibby33]

Just started mining at wafflepool with my Zeusminer Thunder x3. I see this repeated quite often in my log file, usually consecutively:

[2014-10-27 15:25:18] Unknown stratum msg: {"id":null,"result":[],"error":true}

[2014-10-27 15:25:18] JSON-RPC non method decode failed: (null)

Anyone know what this means? Thanks in advance for any help.

[Wolf-Tech]

Just started mining at wafflepool with my Zeusminer Thunder x3. I see this repeated quite often in my log file, usually consecutively:

[2014-10-27 15:25:18] Unknown stratum msg: {"id":null,"result":[],"error":true}

[2014-10-27 15:25:18] JSON-RPC non method decode failed: (null)

Anyone know what this means? Thanks in advance for any help.

I have 2 thunders x3s never had that error come up at all.

Did you mine anywhere else with your thunder ?

[chibby33]

Just started mining at wafflepool with my Zeusminer Thunder x3. I see this repeated quite often in my log file, usually consecutively:

[2014-10-27 15:25:18] Unknown stratum msg: {"id":null,"result":[],"error":true}

[2014-10-27 15:25:18] JSON-RPC non method decode failed: (null)

Anyone know what this means? Thanks in advance for any help.

I have 2 thunders x3s never had that error come up at all.

Did you mine anywhere else with your thunder ?

No I just got them, and this is my first time with wafflepool as well so wasn't sure if this was something due to the pool or the thunders.  Apparently it's not normal for either.  I'm hashing away at 30 MH/s per unit with very low rejects and hw errors so doesn't seem to be having any ill effects on my mining.  I was more curious than anything, just hadn't seen it before.

[suchmoon]

Just started mining at wafflepool with my Zeusminer Thunder x3. I see this repeated quite often in my log file, usually consecutively:

[2014-10-27 15:25:18] Unknown stratum msg: {"id":null,"result":[],"error":true}

[2014-10-27 15:25:18] JSON-RPC non method decode failed: (null)

Anyone know what this means? Thanks in advance for any help.

I have 2 thunders x3s never had that error come up at all.

Did you mine anywhere else with your thunder ?

No I just got them, and this is my first time with wafflepool as well so wasn't sure if this was something due to the pool or the thunders.  Apparently it's not normal for either.  I'm hashing away at 30 MH/s per unit with very low rejects and hw errors so doesn't seem to be having any ill effects on my mining.  I was more curious than anything, just hadn't seen it before.

This has come up before:

https://bitcointalk.org/index.php?topic=433634.msg6147577#msg6147577

It doesn't look like there was an explanation for it but maybe you'll find something there.

[chibby33]

Just started mining at wafflepool with my Zeusminer Thunder x3. I see this repeated quite often in my log file, usually consecutively:

[2014-10-27 15:25:18] Unknown stratum msg: {"id":null,"result":[],"error":true}

[2014-10-27 15:25:18] JSON-RPC non method decode failed: (null)

Anyone know what this means? Thanks in advance for any help.

I have 2 thunders x3s never had that error come up at all.

Did you mine anywhere else with your thunder ?

No I just got them, and this is my first time with wafflepool as well so wasn't sure if this was something due to the pool or the thunders.  Apparently it's not normal for either.  I'm hashing away at 30 MH/s per unit with very low rejects and hw errors so doesn't seem to be having any ill effects on my mining.  I was more curious than anything, just hadn't seen it before.

This has come up before:

https://bitcointalk.org/index.php?topic=433634.msg6147577#msg6147577

It doesn't look like there was an explanation for it but maybe you'll find something there.

Thanks, at least now I know I'm not the only one.  I'll do some digging with the info provided and see what I can figure out.

[drivenmonkey]

Hello everyone!

I have set up the x-11 mining with Wafflepool. Things are running on the miner but it is not accepting shares. Below are the configs. Wondering if anyone (with more knowledge than me) could have a quick look and see what I'm missing!

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1

sgminer -o stratum+tcp://useast.wafflepool.com:3331 -u 1HEjkCzdUA723UbmUMaSVHqUmaWegPgo5g -p d=0.16 --lookup-gap 2 --thread-concurrency 8192 --shaders 2048 -g 2 -I 13 -w 256 --auto-fan --gpu-fan 30-75,30-75 --temp-cutoff 90,90 --temp-overheat 85.85 --temp-target 72,72 --gpu-memclock 1500,1500 --gpu-engine 1000,1050,1050,1080,1100 --gpu-powertune 0,0 --expiry 1 --scan-time 1 --queue 0 --no-submit-stale --kernel=x11mod

I have 5 GPUs: R9 280x
Running Windows 7

I was running a scrypt system with clever mining. I have since moved and it blows the breaker. Figured x11 would draw less power!

Any and all help is very much appreciated!

[m0narch]

Hello everyone!

I have set up the x-11 mining with Wafflepool. Things are running on the miner but it is not accepting shares. Below are the configs. Wondering if anyone (with more knowledge than me) could have a quick look and see what I'm missing!

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1

sgminer -o stratum+tcp://useast.wafflepool.com:3331 -u 1HEjkCzdUA723UbmUMaSVHqUmaWegPgo5g -p d=0.16 --lookup-gap 2 --thread-concurrency 8192 --shaders 2048 -g 2 -I 13 -w 256 --auto-fan --gpu-fan 30-75,30-75 --temp-cutoff 90,90 --temp-overheat 85.85 --temp-target 72,72 --gpu-memclock 1500,1500 --gpu-engine 1000,1050,1050,1080,1100 --gpu-powertune 0,0 --expiry 1 --scan-time 1 --queue 0 --no-submit-stale --kernel=x11mod

I have 5 GPUs: R9 280x
Running Windows 7

I was running a scrypt system with clever mining. I have since moved and it blows the breaker. Figured x11 would draw less power!

Any and all help is very much appreciated!

Have you tried mining the pool with a bare bones config? You have a lot of extra stuff in that config that is not really needed. Try pointing to another stratum server also. That frequently helps as sometimes one of the servers has a hiccup and won't work properly. Point to west for a bit and see if it accepts shares. Also post your errors so it's easier for us to try and figure out what is happening.

[poolwaffle]

Just a heads up, we've essentially written off the Mintpal coins (~2btc).  I don't forsee them fixing and recovering from their "upgrade".  All of the balances that were outstanding on their end have been archived (we still have them, but they're not counted in stats).  In the event that mintpal does come back up, and we can recover those coins, I'll import the user balances back, and everything should work correctly again.  With the change though, stats for today will be blatently incorrect.  Everything is working properly, and earnings are fine, just stats are off for today.  Sorry for the inconvenience

[KSGuy]

Thanks for the update, it's to bad mintpal went to sh^t

[ak111in]

Looking for feedback for www.wafflepoolmonitor.com

Hi,

I need some feedback for www.wafflepoolmonitor.com so that I can improve the website and make it better.
Please use the form to give your feedback:

https://docs.google.com/forms/d/1cz11HfLtNz3aA0IZg3KWkEIwWmMZu8S-tYYUeOMJXvo/viewform?usp=send_form

Also giving .0001 BTC for each valid response [total 100 max] and .001 BTC for best response till 6 Nov 14, if you post your BTC address in the following topic [ https://bitcointalk.org/index.php?topic=840403 ] after you have filled the form. Giveaway is only valid for members with min 25 acivity and accounts created before 1 Aug 14. Please do not fill the form multiple times.

Regards

[conspirosphere.tk]

Is there some problem with the pool right now?

Had high rejects on eu.wafflepool.com (Job not found errors) switched to useast and it's all good

I'm getting 49.8% rejects on scrypt from yesterday, and moving from eu. to useast. did not change anything.
 

[aubuc]

Is there some problem with the pool right now?

Had high rejects on eu.wafflepool.com (Job not found errors) switched to useast and it's all good

I'm getting 49.8% rejects on scrypt from yesterday, and moving from eu. to useast. did not change anything.
 

Same here for X11.

[chasmacd]

Is there some problem with the pool right now?

Had high rejects on eu.wafflepool.com (Job not found errors) switched to useast and it's all good

I'm getting 49.8% rejects on scrypt from yesterday, and moving from eu. to useast. did not change anything.
 

Same here for X11.

I was getting the "Job not Found" errors and wafflepoolmonitor was showing double my hash rate.  I must be one of the lucky ones as moving to USEast has sorted it for now.

[grendel25]

So I'm back on WP after a monero binge.  Sorry but, I'm here to complain again.  I understand server admins always say they can't do anything about the difference in hash speed reported on the web compared to actual.

But... I have noticed more accurate readings on other sites for X11.  Is there really nothing to be done about this?  it's bad enough the payouts don't even seem to add up to the estimates.

Sorry... I'm just a little paranoid, angry and distrustful lately.  I think the btc price reflects the opinions of many.  doesn't help when 'secure' websites like bittrex can be so easily hacked and the site owners won't even do anything about it.  Needless to say, I won't be using bittrex for anything anymore.

I'm done with my rant but can you answer this question:  I've got over 50 mh/s X11 pointing at WP and I seem to always see half that reported by the website.  Anything that can be done to improve statistical accuracy?

thx

[suchmoon]

So I'm back on WP after a monero binge.  Sorry but, I'm here to complain again.  I understand server admins always say they can't do anything about the difference in hash speed reported on the web compared to actual.

But... I have noticed more accurate readings on other sites for X11.  Is there really nothing to be done about this?  it's bad enough the payouts don't even seem to add up to the estimates.

Sorry... I'm just a little paranoid, angry and distrustful lately.  I think the btc price reflects the opinions of many.  doesn't help when 'secure' websites like bittrex can be so easily hacked and the site owners won't even do anything about it.  Needless to say, I won't be using bittrex for anything anymore.

I'm done with my rant but can you answer this question:  I've got over 50 mh/s X11 pointing at WP and I seem to always see half that reported by the website.  Anything that can be done to improve statistical accuracy?

thx

Are you seeing excessive rejects or anything else unusual? I have only about 16 MH/s and waffle's hashrate and payouts are spot on for me with very rare exceptions. I'm connecting to US West with a ~50ms ping.

Edit: mixed up server names, US East is 90ms for me.

[grendel25]

So I'm back on WP after a monero binge.  Sorry but, I'm here to complain again.  I understand server admins always say they can't do anything about the difference in hash speed reported on the web compared to actual.

But... I have noticed more accurate readings on other sites for X11.  Is there really nothing to be done about this?  it's bad enough the payouts don't even seem to add up to the estimates.

Sorry... I'm just a little paranoid, angry and distrustful lately.  I think the btc price reflects the opinions of many.  doesn't help when 'secure' websites like bittrex can be so easily hacked and the site owners won't even do anything about it.  Needless to say, I won't be using bittrex for anything anymore.

I'm done with my rant but can you answer this question:  I've got over 50 mh/s X11 pointing at WP and I seem to always see half that reported by the website.  Anything that can be done to improve statistical accuracy?

thx

Are you seeing excessive rejects or anything else unusual? I have only about 16 MH/s and waffle's hashrate and payouts are spot on for me with very rare exceptions. I'm connecting to US West with a ~50ms ping.

Edit: mixed up server names, US East is 90ms for me.

o..m..g..... I'm so dumb lol.  yeah so, about 17 mh/s or so of hash was going at port 3336 instead of 3331  /facepalm.

Thank you for your reassuring words and for your reply, Suchmoon.  smh... sooooo sorry for my retard rant up above. 

[true-asset]

Please updated to this new release of the Urocoin wallet ASAP: https://github.com/urocoin/uro/releases/tag/1.0.2.3

Thanks