 Show Posts
|
|
Pages: [1] 2 »
|
it does not make much sense to put them into the pc case, they look a lot better outside of it  |
|
|
|
Lovely mess indeed |
|
|
|
|
try to use localbitcoins for various ways.
|
|
|
|
|
Google can be very helpfull sometimes.
|
|
|
|
|
make something unique and sell it.
|
|
|
|
just send it to some random newbie like a gift |
|
|
|
Welcome and good luck |
|
|
|
Are there coins that are proof against ASIC? with all the new scrypt ASIC's coming out...
Yes, there is n-factor coins like VTC and Sha-3 coins like MAX, both with great potencial. |
|
|
|
|
are you going to mine BTC or scrypt coins?
|
|
|
|
|
Hello and welcome, this is great place to learn and be in the BTC community.
|
|
|
|
Building a bigger, better anthill now that the weather is getting warm and I cant fit anything else on my limited apartment circuits. You can see a before-and-after: went from a storage area in the back of an office to what will become a high-capacity rack. 2x L6-30 circuits (213V, 30A each) - Currently using an unmetered PDU with C13 outlets 1x L21-20 circuit (120V, 20A,20A,20A) - Currently using a metered PDU with L5-20 outlets 1x 5-20 circuit with duplex outlet approximately 15kW of power available under 80% rule of thumb, with about 4kW of equipment once I move a few more things in, a bunch more antminers showing up thursday, and leaving lots of room to grow. Not sure what I will hit first - power limits or cooling limits (industrial 600V A/C)   There is a 1200W Corsair PSU, plus 3x 835W server power supplies wired up and ready to go. All of them will use 213V power for a bit better efficiency What is the hardware used there? |
|
|
|
This powers four of them:  Details on the PSU? it's 4, 2kw PSUs from the IBC bladecenter. Absolutely rock bloody solid power supplies. I'm had them running 6 antminers each actually, I keep it at 4 each for better power efficiency. I made more than I need, so I'd imagine I'll be selling the extras, with the power distribution blocks as well. (Can run 6ants from 1 block) Complete plug n play kit if anyone is interested. They only run at 208v-240v single phase. Very clean looking setup. |
|
|
|
|
You can try to use bitstamp or any other exchange.
|
|
|
|
|
PM, if you need further instructions. I am sure i can help you get them working in the same time.
|
|
|
|
|
I can help you, you just need to use different bat files for each of the card, test them separatly and make those two different bat files for easc of the card. Just use argument -d 0 for first card in one bat file and -d 1 in bat file for another bat file.Let me know your success, i can help to configure it further if necessary.
|
|
|
|
Are people actually working right next to this rig and all the noise?
Is that an office or something?
it is no necesarry to be very noisy, good push pull fan configuration and there should be very moderate noise level. |
|
|
|
|
