 Show Posts
|
|
Pages: [1]
|
thank you very much for your time and attention. please see this: page 6 : (2) All input/output data is 32bit aligned, and send out in MSB (that means the highest bit send first). page 8 : All data is sent in MSB, means high bit, high byte and high word is sent first Can you provide contact for technical questions?
If you look in the datasheet PDF of the chip:
page 6 :
(2) All input/output data is 32bit aligned, and send out in MSB (that means
lowest bit send first).
page 8 :
All data is sent in MSB, means high bit, high byte and high word is sent first
Wich one is correct ?
|
|
|
|
These are interesting...
Anyone want to go in together on a batch of the samples?
-a[g
sold out!  restock needs few days |
|
|
|
Our team ordered samples
Shipped  |
|
|
|
Hey 20 chips at 25GH/s each for a total of 500 GH/s and 1BTC. Bargain folks!  If you guys are too lazy to put together your own miners (end sarcasm), then just buy one:  290 GH/s for about $300. Ehh, still not worth it. SAMPLE CHIPS. Avalon4 will be ~1TH/s (1~1.2) ~700W ~490USD |
|
|
|
325 Gh as maximum? For 0.65 BTC? Why should I choose this device? Because of power efficiency maybe? It's not so huge comparing to S3...
That's avalon3(2014-03), avalon4 will be 700W, >1 TH/S(1~1.2+) , price should be ~490USD( ~1 BTC now) |
|
|
|
LOL
Here's the pictures.
........
I wanted proof of the 28nm chips. Speed and power consumption. Avalon4 single module will available at October 2014.As @Dogie says we are “Only sells in hand hardware and has done so for over a year.”And before marketing, we'll send several samples to some media(like @Dogie etc.) to do a review. |
|
|
|
Who owns it? Same location as Zhao's? There're several buildings, Zhao owns some of em, so are we. |
|
|
|
F YOU scammers - reimburse people for your crap from last year. otherwise gtfo
You are supposed to forgive them now...it is different this time  f*ck yifu and his shady bs outfit. scammer for life. he can shove his tech up his as* until he reimburses what he stole Bitsyncom(Yifu Guo) have left Avalon project, right now the Avalon project running by Canaan Creative, Ltd., (founded by ngzhang) Locate Beijing China. Then change the damn company name. "Avalon" makes me itchy! Is that so hard to find a new name? Yep. We've got the chips and tested(~2 weeks ago You can check the datasheet and waiting for the machine You'll never be disappointed  Why not show a proof? People need to pay for the chips in order to see for themselves the performance? Post a damn picture, video, whatever! Otherwise it's BS because you can write whatever you want in the datasheet. Scammers! LOL Here's the pictures.  Avalon3 deployment.   More than 20K Avalon3 modules @ Inner Mongolia.  Avalon4 chips and avalon nano usb miner.   Chips. And now? |
|
|
|
Ahaha this must be a joke  We will see. |
|
|
|
2btc/TH ? only chips? omg, too much Sample chips for developer |
|
|
|
Encapsulation: QFN56-8×8，0.5mm pitch
Rated working voltage: 0.65V – 0.8V
Rated working frequency: 400MHz (typical)
Rated mining speed: 25GHS@400MHz (typical)
Chip reference energy efficiency: 0.4~0.6W/G
Can you prove the stated performance? Yep. We've got the chips and tested(~2 weeks ago You can check the datasheet and waiting for the machine You'll never be disappointed |
|
|
|
F YOU scammers - reimburse people for your crap from last year. otherwise gtfo
You are supposed to forgive them now...it is different this time f*ck yifu and his shady bs outfit. scammer for life. he can shove his tech up his as* until he reimburses what he stole Bitsyncom(Yifu Guo) have left Avalon project, right now the Avalon project running by Canaan Creative, Ltd., (founded by ngzhang) Locate Beijing China. |
|
|
|
For anyone who can't be bothered to use their brains, the prices are specifically high because they are SAMPLE chips. Its to discourage one developer buying more than they need which is unfair - Avalon will only have a tiny batch until their actual batches for SALE come in.
Hmm i think they should be free for established proven developers. Such strategy is better for chips adoption. They don't need better chip adoption, there is limited supply and they have to open it up as a level playing field. There are more developers than there are chips. Asia has been busy buying 1,000,000s of Avalon chips while the forums have 'boycotted' them thinking its still Yifu when they quite simply don't care. This isn't the company Avalon, this isn't the company that did trade ins, this isn't the company that random batch 1 2 and 3. If people don't want to buy, they don't have to. You will receive a module to test ? If yes, when ? Absolutely no idea. I have no information more than anyone else does. engineering sample still needs 1~2 weeks |
|
|
|
Avalon4 with global shipping can be purchased here!Chip Parameters: Packaging: QFN56-8×8，0.5mm pitch Rated working voltage: 0.65V – 0.8V Rated working frequency: 400MHz (typical) Rated mining speed: ~25GHS@400MHz (typical) Chip reference energy efficiency: 0.4~0.6W/G Related documents: Datasheet: http://downloads.canaan-creative.com/hardware/A3222/datasheet/Reference design: http://downloads.canaan-creative.com/hardware/A3222/avalon4/More information: https://en.bitcoin.it/wiki/Avalon4Avalon4 Parameters: Chips: 40x Avalon4 A2322 Rated mining speed: 1300GH Rated working voltage: 12V Power consumption: 730W This is not Bitsyncom(Yifu Guo) or his company Avalon. This product is designed, manufacturered and sold by engineers (ngzhang etc) who left his company and founded Canaan Creative, Ltd. in Beijing, ChinaFAQ and Technical SupportDogie's comprehensive setup guide in super HD!Configuration (TL-WR703N)Wiring: - Plug one 4 pin cable connected from the 4 pin header on the unit to the micro USB adapter.
- Connect a micro USB to USB cable to the micro USB adapter, and then plug this into your controller.
- More units can be added by plugging another 4 pin cable from the second unit to the first unit's other 4 pin header.
- Plug in a /hCQilO]network cable from the WR703N to your router, and power it on.
Configuration: - Power on the power supply using its switch at the back.
- Make sure or your router's subnet is 0, ie 192.168.0.x. If not then change it to 0, this is just temporary. ***If this is not possible, see below***
- Using a browser, navigate to 192.168.0.100 - this goes to the WR703N's configuration page.
- Login using "root" as the username.
- Navigate to Network -> Interfaces -> WAN -> Edit.
- Change protocol to DHCP and click "Save & Apply".
- Using a browser, navigate to your router and find the IP it has assigned the WR703N and navigate to that IP.
- Navigate to the page Status -> Miner Configuration. Enter your pool information in the below format.
- Navigate to the page "Miner Status" to check mining has started.
- You can then change your router subnet back to whatever you are used to using.
Alternative Subnet Change: - Unplug your computer from all internet sources.
- Plug in an ethernet cable from the WR703N to your computer.
- Navigate to Control Panel -> Network and Sharing Centre -> Change Adapter Settings.
- Right click on your ethernet adapter -> Properties.
- Click on "Internet Protocol Version 4" and click properties.
- Select "Use the following IP address" and enter the following:
- IP Address: 192.168.0.1, Subnet Mask: 255.255.255.0, Default Gateway: 192.168.0.100.
- Plug in an ethernet cable from the WR703N to you router.
- Restart the configuration instructions as above.
Wiring: - Plug one 4 pin cable connected from the 4 pin header on the unit to the micro USB adapter.
- Connect a micro USB to USB cable to the micro USB adapter, and then plug this into your controller.
- More units can be added by plugging another 4 pin cable from the second unit to the first unit's other 4 pin header.
- Plug in a /hCQilO]network cable from the WR703N to your router, and power it on.
Configuration: - Put the SD card into another computer.
- /jtdHMl]Download the RasperryPi Avalon 4 OS image (sdcard-vfat-ext4.img)
- /A22fj5]Download the Win32 Disk Imager and use it to flash SD card with this image.
- Put SD card into RaspPi and power it on.
- Power on the power supply using its switch at the back.
- Make sure or your router's subnet is 0, ie 192.168.0.x. If not then change it to 0, this is just temporary. ***If this is not possible, see below***
- Using a browser, navigate to 192.168.0.100 - this goes to the Raspberry Pi's configuration page.
- Login using "root" as the username.
- Navigate to Network -> Interfaces -> WAN -> Edit.
- Change protocol to DHCP and click "Save & Apply".
- Using a browser, navigate to your router and find the IP it has assigned the Raspberry Pi and navigate to that IP.
- Navigate to the page Status -> Miner Configuration. Enter your pool information in the below format.
- Navigate to the page "Miner Status" to check mining has started.
- You can then change your router subnet back to whatever you are used to using.
Alternative Subnet Change: - Unplug your computer from all internet sources.
- Plug in an ethernet cable from the Raspberry Pi to your computer.
- Navigate to Control Panel -> Network and Sharing Centre -> Change Adapter Settings.
- Right click on your ethernet adapter -> Properties.
- Click on "Internet Protocol Version 4" and click properties.
- Select "Use the following IP address" and enter the following:
- IP Address: 192.168.0.1, Subnet Mask: 255.255.255.0, Default Gateway: 192.168.0.100.
- Plug in an ethernet cable from the Raspberry Pi to you router.
- Restart the configuration instructions as above.
| Problem | Solution | | What temperatures should I aim for? | - Try to achieve <60C for long lifetimes. Temperatures should not be let to rise above 70C. | | How can I tell what firmware version I have now? | - Navigate to Status -> CGMiner API Log and look at "Firmware Version". | | Where.can.I.find.the.latest.firmware.for.the.WR703N? | - Download the latest firmware from /OC6TFg]here (the WR703N.bin). | | Where can I find the latest firmware for the Pi? | - Download the latest firmware from /jtdHMl]here (the sdcard-vfat-ext4.img). | | How do I install the latest firmware? | - Download firmware as above. Navigate to System -> Upgrade and click "browse". Select the
downloaded file and click "Flash image". Do NOT interrupt this process or you will brick the unit. |
| My.power.supply's.cables.are.braided.or.aren't.color.coded | - See below diagram for pin-outs.
 |
Hello all, Canaan Creative has employed me to help liaise with the community and later provide technical support. They have done this in order to help provide: 1) timely technical support 2) provide better feedback (if I don't know, I can find out from the people within CC who will) 3) provide product and sales input from you guys directly into the company. If something is going wrong, YOU can fix it 4) provide native English press releases. This is a paid position, however it will in no way affect my independence or freedom in being critical towards Canaan Creative outside of this thread. My contract specifically stipulates: Dogie will speak on behalf of Canaan Creative and will not criticize CC in these threads. Dogie still reserves the right to criticize CC in his other threads. Both parties acknowledge that this relationship has no impact whatsoever on CC’s rating or standing in “Dogie’s ‘Manufacturer Trustworthiness” thread. This means I won't sit here and reply to every post saying CC is a scam, don't buy from CC etc etc, in this thread. It does NOT prohibit me from saying that in my own threads, if that is what I believe. It also has absolutely no impact on their rating in the Manufacturer trustworthiness thread.
|
|
|
|
|
