@1COIN can you plz make a dedicated pool for your 1coin, THKS

HI  supanove pool acting very strange my hash rate is go up and down like a yoyo and when ever network diff go down under 190 my hash rate drop like a stone and i lose over 1.5 MH it do this all the time not just now and again i find this VERY SUSPICIOUS  check it out guys see what you think,,,

it on page 1  of this thread

try the new amd native miner it will fix your problem i had the same problems but new miner fixs all :} my settings for r9 280x = --thread-concurrency 8193 -I 18 -g 2 -w 128 --gpu-engine 1140 --gpu-memclock 1500 

im geting 7.9 mh on each card  windowxs 7 64bit amd 14.7 drivers,  GOODTIMES   :}

GUYS CHECK OUT NEW AMD MINER IN OP ALL PROBLEMS FIXED NO CRASH AND NO ERRORS (waiting for work from pool) GOODTIMES

@1COIN grate work geting amd miner fixed fast, can you have a look at (Allcoin.com) its a good exchange not the biggest but iv been using  it for a year now and had no problems, thanks

+1
                                            is this problem being FIXED or IGNORED?

@1coin = ok  BAD NEWS sgminer3s_2 CRASHED on me over night withe the same error pop up b4 it crash (waiting for work from pool) the new miner is working and it only crashed on 1 of my rigs but still not good like i say i am geting coins but am losing time well its waiting for work ewrror pop up and it stops mining for 4-5 seconds some time 4-5 minutes iand if it crash thats when it do is there going to be a fix for this because at work all week and dont want to leave mining rig on if they going to crash?? BUT ALL THAT SED I LOVE THE NEW COIN AND HOW 1COIN IS GETING STUFF DONE KEEP IT UP 1COIN 

@1COIN,,, OK try,ed the new sgminer 3s-2 been mining with it for 9hours now no crash yet (GOODTIMES) but im still geting error (waiting for work from pool) i have tryed 3  different pools so i dont think it the pools so it must be the miner yes?? or no?? i get this error every 5-10 mins     


???are people still have this problem WITH UPDATED MINER  let us no if you are???


MY SETUP UPDATED FOR SGMINER 3s-2 asus r9 280x 7.9 MH a card  = sgminer3s -o stratum+tcp://one.suprnova.cc:2323 -u pigy -p pig -I 18

thats it let the miner do the settings for you, you may want to set the fan to  auto if you have your cards in a pc case but i dont like the miner controlling the fan when i do 1 card seems to run a bit slower than the rest just let your OS control the fan best way i find,  and you can get a lil more hash if you go to -I 19 but i dont like my -I over 18 and at 18 the runing temp wont get hotter than 70c
                     


 windows 7 64bit amd drivers 14.7 
                       
                                                   


 

@1coin thanks i have downloaded new updated sgminer still geting (waiting for work from pool) i let you no if i have any crashs  THANKS GUYS

hi try this setting for your 280x i have 8 asus r9 280x and im geting 7.9 MH on each card setings are -I 18 -g 2 -w 128 --thread-concurrency 8193 --gpu-engine 1140 --gpu-memclock 1500 they run low temp as well no 60-67

GUY PLZ HELP BEEN MINING FROM START(SUPRANOVA POOL)  i am geting coins but my sgminer keep crashing iv tryed to put a backup pool but it dont change to it because it crash keep geting (waiting for work from pool) b4 the crash. but this error pop up ever 5-10 mins IS any1 fixing this?? or do any1 no why this keep crashing because iv lost 5 hours mining because of crash. PLZ HELP :}              LOVE THE NEW ALGO










IM ON WINDOWS 7 AMD 14.7 DRIVERS

@scattercoin will this coin go back into POW or can you put this coin back to POW i will mine it if you do and i bet loads others wood as well or is this coin only POS from now onwards?? 

thanks mate will do

hi im mining on supernova pool but i keep geting this in sgminer (waiting for work to be available from pool) work available from pool resuming) ,i amd geting coins -+ but it gives me this error every 2-3 mins, why is tihs? and is there any1 els geting this error??

im up and runing now had to remove the .conf from sgminer files and all working ok thanks 1coin

still wont start :{ pl help

HELP i cant get the sgminer to start here is my .bat file=  sgminer -k 3s -o stratum+tcp://one.suprnova.cc:2323 -u ray  -p x     it wont start plz help i allso used -k 1coin same result im on windows 7 64bit on amd 14.7 drivers ?

LESS THAN 9 HOURS TO GO GOOD LUCK 1COIN (CANT WAIT) 

WOW WHAT A LOAD OF BULL S H .. T I EMAILED YOU GUYS 4 TIMES TELLING YOU THAT YOU WERE ON WRONG FORK AND YOU TOOK 4DAY TO ANSER MY SUPPORT TICKET AND LOOK WHAT YOU SED QUOTE////
 Adam (COINKING)

Oct 19 08:05 PM           

please make sure that you are on the right fork. Our wallet has 65 connections and is at the correct block height. The developer abandoned this coin, i suggest you take a look at the OP which can be found here: https://bitcointalk.org/index.php?topic=516349.0

SO MY REPLY WAS/////
wow you looking on the old bitcointalk page here is the new one    https://bitcointalk.org/index.php?topic=787471.0 i suggest you do more home work and here are the new nodes as a puote I have submitted what I hope to be the final change to the github. I had some help from Raveneye to fix the bug causing the ConnectBlock error.

If you download the client you should be able to sync correctly to the current chain that I am on along with the clients who did not upgraded as it's the longest one. The client will disconnect at block 290,000 and MintPal will allow deposits and withdrawals on the new client as soon as the move to MintPalv2 is complete.

Please update to the new client and use this in your hirocoin.conf to sync to the correct chain with the new client.

UPDATED LIST OF NODES (v. 0.8.6)

addnode=93.178.105.197
addnode=176.28.13.164
addnode=67.215.11.195
addnode=188.226.194.191
addnode=110.143.228.78
addnode=54.193.113.180
addnode=192.99.32.187

Sorry for the inconvenience

The block explorer is now running correctly. It can be found here:

http://explorer.hiropool.org:3001/

There's an issue with the Insight Explorer and X11 hash function causing live block updates to cause a crash. Everything besides the latest blocks tab is functional. The correct block height is available at the top and syncs correctly.,,,
                                                                                YOU ARE ON THE WRONG WALLET HOW MANEY MORE TIMES I AM TRYING TO HELP YOU !!!WTF!! PLZ LOOK ON THE NEW THREAD ITS GOT 5 PAGES LOOK  MAY BE YOU WILL GET WHAT I AM SAYING,, THEN AND SEND SOME OF YOUR COINS AND YOU WILL SEE WHAT I MEAN I LOST OVER 150000 COINS BECAUSE YOU FORK IS DEAD?? DO I GET MY COINS BACKL FROM YOU I SENT THEM TO A EXCHANGES AND THEY WILL CONFIRM THEY DID NOT TURN UP? PLZ LOOK IN TO THIS IM NOT FUCKING YOU ABOUT WHAT I SAY IS %100 TRUE EMAIL BACK WHEN YOU HAVE LOOKED IN TO THIS. THKS  ps the quote is from page 2 of the new thread you can find the link for the new thread on page 162 of the old thread. THKS
 AND A HOUR AFTER I SENT THIS FOR THE 2ND TIME THEY PUT A NOTE OUT ON THERE SITE AND THEN THEY CHANGED THE FORK AS YOU CAN SEE I HELPED THEM BY TELING THEM OVER AND OVER AGAIN, I DID NOT WANT ANYTHING FOR MY EMAILS JUST FOR THEM TO SAY THANK AND THEYS WERE SORRY I LOST OVER 150000 HIROCOINS AND 3DAYS MINING BUT NOT EVEN A THANKS NO REPLY EMAIL AT ALL,,,,    !!!THAT HOW COINKING SORT THINGS OUT!!!  PS i can take pics of my email and post them to prove this

will you be ready at launch from the getgo or will you have to test the new algo?