[ANN][ONE]1Coin|**UPDATE**|v1.2.2.1CPR|3S Algo|Faucet @ puredice.com

[muchoman]

@ 1coin.eu

I tried the new gpu miner in the OP.

Ran fine for about 3 hours then I had the lock up again . I am puzzled at what is causing this.

I have no issues at all running my Nvidia cards but can't get the AMD to stay up and running.

Using Windows 7 64bit driver 13.12. I thought maybe driver issue but someone else posted same issue using driver 14.7 on Windows 7, though not sure if they are on 32 or 64 bit.

i think you should try 14.4 at least or maybe even 14.9
but it does sound more like a heat problem or maybe faulty hardware

Yea sounds tht way to me too, maybe the fan speed is not high enough allowing card to overheat. I've started a new miner before and not noticed the fan was barely running untill it overheated and crashed the comp.

I'm getting 9.3 Mh/s on my 290x bf4 an 3.6 Mh/s on hd7850. Didn't do much tweaking last night as I was late getting my cards launched but Today Im going try to tweak alittle more but overall the miners seem to be stable. One rig is running windows 8.1 x64 w 14.7 drivers and the other windows 7 x64 14.6 drivers

Not faulty cards as this only happens with this miner and not heat issue. fans running at 75% on both cards and they are at 55° and 50°.

Pushing the cards to hard? Possibility here is my bat: --thread-concurrency 8192 -I 19 --worksize 256 -g 2 also both cards are at Core: 1050 and Mem: 1550

Getting 6.6 Mh/s on my 280X and 4.3 Mh/s on my 270X.

Try 14.9 drivers
I get 8 Mh/s on 280x and 5 Mh/s on 270x
no issues
-I 19,16 -w 256,128 -g 2,2 --gpu-platform 1 --no-submit-stale --lookup-gap 2 --thread-concurrency 8192,10241

[zheratuul]

My MSI 280x has only 6.4 Mhash/s.
I'm using Win 8.1 64 bit. Catalyst 14.6 RC2.
My config:
sgminer3s.exe -k 3s -o stratum+tcp://one.suprnova.cc:2323 -u x -p x -I 19 -w 256 --thread-concurrency 8192 --lookup-gap 2 -g 4 --shaders 2048 --gpu-engine 1150 --gpu-memclock 1500 --auto-fan --gpu-fan 55-80 --temp-cutoff 80 --temp-overheat 75 --temp-target 70 --no-submit-stale --no-pool-disable --api-listen --api-allow W:127.0.0.1 --expiry 1

 

try changing this -g 4 to -g 2

[DarKside68]

7,3Mh/s to Msi 280x
bat: -I 19 -g 2 -w 256 --lookup-gap 2 --gpu-engine 1140,1140,1140,1140 --gpu-memclock 1500,1500,1500,1500 --gpu-fan 100,100,100,100 --thread-concurrency 8193 --no-submit-stale
pause

drivers 13.2

[capler]

sminer3s per day of work occupies the whole memory and systems down  OC Ubuntu

[Cryptosis]

@ 1coin.eu

I tried the new gpu miner in the OP.

Ran fine for about 3 hours then I had the lock up again . I am puzzled at what is causing this.

I have no issues at all running my Nvidia cards but can't get the AMD to stay up and running.

Using Windows 7 64bit driver 13.12. I thought maybe driver issue but someone else posted same issue using driver 14.7 on Windows 7, though not sure if they are on 32 or 64 bit.

i think you should try 14.4 at least or maybe even 14.9
but it does sound more like a heat problem or maybe faulty hardware

Yea sounds tht way to me too, maybe the fan speed is not high enough allowing card to overheat. I've started a new miner before and not noticed the fan was barely running untill it overheated and crashed the comp.

I'm getting 9.3 Mh/s on my 290x bf4 an 3.6 Mh/s on hd7850. Didn't do much tweaking last night as I was late getting my cards launched but Today Im going try to tweak alittle more but overall the miners seem to be stable. One rig is running windows 8.1 x64 w 14.7 drivers and the other windows 7 x64 14.6 drivers

Not faulty cards as this only happens with this miner and not heat issue. fans running at 75% on both cards and they are at 55° and 50°.

Pushing the cards to hard? Possibility here is my bat: --thread-concurrency 8192 -I 19 --worksize 256 -g 2 also both cards are at Core: 1050 and Mem: 1550

Getting 6.6 Mh/s on my 280X and 4.3 Mh/s on my 270X.

Try using experimental intensity of 85 - 100 you will get more stability and bring your mem clock down 1550 seems awfully high and I don't think you'll get much more performance running it that high.

I run my engine clock at 1010 and mem clock at 1325 and I get decent hashrates + long term stability. On X11 it can run for over a month without a restart and this new 3s algo seems to be even better. Hats off to the dev team!

[Theundertaker!]

@ 1coin.eu

I tried the new gpu miner in the OP.

Ran fine for about 3 hours then I had the lock up again . I am puzzled at what is causing this.

I have no issues at all running my Nvidia cards but can't get the AMD to stay up and running.

Using Windows 7 64bit driver 13.12. I thought maybe driver issue but someone else posted same issue using driver 14.7 on Windows 7, though not sure if they are on 32 or 64 bit.

i think you should try 14.4 at least or maybe even 14.9
but it does sound more like a heat problem or maybe faulty hardware

Yea sounds tht way to me too, maybe the fan speed is not high enough allowing card to overheat. I've started a new miner before and not noticed the fan was barely running untill it overheated and crashed the comp.

I'm getting 9.3 Mh/s on my 290x bf4 an 3.6 Mh/s on hd7850. Didn't do much tweaking last night as I was late getting my cards launched but Today Im going try to tweak alittle more but overall the miners seem to be stable. One rig is running windows 8.1 x64 w 14.7 drivers and the other windows 7 x64 14.6 drivers

Not faulty cards as this only happens with this miner and not heat issue. fans running at 75% on both cards and they are at 55° and 50°.

Pushing the cards to hard? Possibility here is my bat: --thread-concurrency 8192 -I 19 --worksize 256 -g 2 also both cards are at Core: 1050 and Mem: 1550

Getting 6.6 Mh/s on my 280X and 4.3 Mh/s on my 270X.

hi try this setting for your 280x i have 8 asus r9 280x and im geting 7.9 MH on each card setings are -I 18 -g 2 -w 128 --thread-concurrency 8193 --gpu-engine 1140 --gpu-memclock 1500 they run low temp as well no 60-67

[Theundertaker!]

@1coin thanks i have downloaded new updated sgminer still geting (waiting for work from pool) i let you no if i have any crashs  THANKS GUYS

[bahu]

Hello all

Quick question. I would like to compare my results on hd7950card
I got 5.35Mh/s per card
my miner arguments are as follows
-I 18 -g 2 -w 256 --thread-concurrency 8192

I tried few different settings but this the best i can get at the moment.
Does somebody have better results?

[nrg_wolf]

Hello all

Quick question. I would like to compare my results on hd7950card
I got 5.35Mh/s per card
my miner arguments are as follows
-I 18 -g 2 -w 256 --thread-concurrency 8192

I tried few different settings but this the best i can get at the moment.
Does somebody have better results?

yes try setting core clock to atleast 1100 and mem clock down to 1200 or lower as this algo relys more on core speed then memory, tc to 22400 -g 1 and I 20. gives 6.6mhs per card.

[llcoolj]

I got 7.4Mh/s per card Asus 280x with card setings (14.4 drivers) :  -I 18 -w 128 --thread-concurrency 8193 -g 2 --gpu-engine 1150 --gpu-memclock 1500

[mig6r]

8.2mh for my 280X with 14.9, and sgminer3s (not sgminer3s_2) gpu engine 1180, g2.
sgminer3s_2 is slower 

[Theundertaker!]

@1COIN,,, OK try,ed the new sgminer 3s-2 been mining with it for 9hours now no crash yet (GOODTIMES) but im still geting error (waiting for work from pool) i have tryed 3  different pools so i dont think it the pools so it must be the miner yes?? or no?? i get this error every 5-10 mins     


???are people still have this problem WITH UPDATED MINER  let us no if you are???


MY SETUP UPDATED FOR SGMINER 3s-2 asus r9 280x 7.9 MH a card  = sgminer3s -o stratum+tcp://one.suprnova.cc:2323 -u pigy -p pig -I 18

thats it let the miner do the settings for you, you may want to set the fan to  auto if you have your cards in a pc case but i dont like the miner controlling the fan when i do 1 card seems to run a bit slower than the rest just let your OS control the fan best way i find,  and you can get a lil more hash if you go to -I 19 but i dont like my -I over 18 and at 18 the runing temp wont get hotter than 70c
                     


 windows 7 64bit amd drivers 14.7 
                       
                                                   


 

[michael_phelps]

8.2mh for my 280X with 14.9, and sgminer3s (not sgminer3s_2) gpu engine 1180, g2.
sgminer3s_2 is slower 

See the OP  --

sgminer3s is faster than sgminer3s_2

[Haslett5236]

only one coin and 100billion coin any different?

[circa1O]

I got 7.4Mh/s per card Asus 280x with card setings (14.4 drivers) :  -I 18 -w 128 --thread-concurrency 8193 -g 2 --gpu-engine 1150 --gpu-memclock 1500

i got 7.3Mh/s at 58 to 60 temp with 14.6 drivers --gpu-engine 1100 --gpu-memclock 1500   280x cards 3s algo is so good..

[Theundertaker!]

@1coin = ok  BAD NEWS sgminer3s_2 CRASHED on me over night withe the same error pop up b4 it crash (waiting for work from pool) the new miner is working and it only crashed on 1 of my rigs but still not good like i say i am geting coins but am losing time well its waiting for work ewrror pop up and it stops mining for 4-5 seconds some time 4-5 minutes iand if it crash thats when it do is there going to be a fix for this because at work all week and dont want to leave mining rig on if they going to crash?? BUT ALL THAT SED I LOVE THE NEW COIN AND HOW 1COIN IS GETING STUFF DONE KEEP IT UP 1COIN 

[Shkembe]

Let's get ONE to €1 - that's good but we need some help dev.
So, wake up and tell us more about you plams etc.....

[loonb]

Huh? 
Brand new coin with unique features! 
Lets call for China to get the party started

[antonio8]

Keeping an eye on the thread but stopped mining for a little while.

Curious question since I had problems with the miner stopping (but I did lower the intesity by 1 or 2 and that helped a lot from a recommendation).

Does CGWatcher work with sgminer? The reason I ask is if it does work just set CGWatcher to restart the miner every hour and that should help with down time. I had to do that to a coin months ago and it worked well for me. Just a thought if sgminer will work with it.

[tbearhere]

Need c-cex

just requested 1coin to be listed on c-cex

any news yet?