Must intall update, windows 10 version 1703 (aniversary update and High)

I have 33MH on 1070 (MEM +1000)

I have the same problem. Interestingly, it's only on new GTX 1060 revisions and on Stock Frequency. I have ASUS, MSI different versions and all the same error and I can not figure out what it is.

12:33:19:093   1b94   parse packet: 242
12:33:19:093   1b94   ETH: job is the same
12:33:19:108   1b94   new buf size: 0
12:33:22:124   1a9c   GPU 5, GpuMiner cu_k1 failed 4, unspecified launch failure
12:33:22:124   1a9c   GPU 5, GpuMiner kx failed 1
12:33:22:124   1a9c   Set global fail flag, failed GPU5
12:33:22:140   1704   GPU 2, GpuMiner cu_k1 failed 4, unspecified launch failure
12:33:22:140   734   GPU 1, GpuMiner cu_k1 failed 4, unspecified launch failure
12:33:22:140   1704   GPU 2, GpuMiner kx failed 1
12:33:22:155   1a9c   GPU 5 failed
12:33:22:155   178c   GPU 0, GpuMiner cu_k1 failed 4, unspecified launch failure
12:33:22:155   734   GPU 1, GpuMiner kx failed 1
12:33:22:171   734   Set global fail flag, failed GPU1
12:33:22:171   734   GPU 1 failed
12:33:22:171   178c   GPU 0, GpuMiner kx failed 1
12:33:22:187   1e28   GPU 5, GpuMiner cu_k1 failed 4, unspecified launch failure
12:33:22:155   1704   Set global fail flag, failed GPU2
12:33:22:187   1704   GPU 2 failed
12:33:22:202   1754   GPU 2, GpuMiner cu_k1 failed 4, unspecified launch failure
12:33:22:187   178c   Set global fail flag, failed GPU0
12:33:22:202   178c   GPU 0 failed
12:33:22:202   740   GPU 0, GpuMiner cu_k1 failed 4, unspecified launch failure
12:33:22:218   1e28   GPU 5, GpuMiner kx failed 1
12:33:22:218   45c   GPU 1, GpuMiner cu_k1 failed 4, unspecified launch failure
12:33:22:218   45c   GPU 1, GpuMiner kx failed 1
12:33:22:234   17f4   GPU 4, GpuMiner cu_k1 failed 4, unspecified launch failure
12:33:22:234   17f4   GPU 4, GpuMiner kx failed 1
12:33:22:249   740   GPU 0, GpuMiner kx failed 1
12:33:22:218   1e28   Set global fail flag, failed GPU5
12:33:22:249   1e28   GPU 5 failed
12:33:22:249   17f4   Set global fail flag, failed GPU4
12:33:22:280   17f4   GPU 4 failed
12:33:22:296   16fc   GPU 4, GpuMiner cu_k1 failed 4, unspecified launch failure
12:33:22:296   16fc   GPU 4, GpuMiner kx failed 1
12:33:22:296   1728   GPU 3, GpuMiner cu_k1 failed 4, unspecified launch failure
12:33:22:327   1728   GPU 3, GpuMiner kx failed 1
12:33:22:327   1754   GPU 2, GpuMiner kx failed 1
12:33:22:327   1728   Set global fail flag, failed GPU3
12:33:22:296   16fc   Set global fail flag, failed GPU4
12:33:22:343   16fc   GPU 4 failed
12:33:22:327   1754   Set global fail flag, failed GPU2
12:33:22:343   1754   GPU 2 failed
12:33:22:359   1728   GPU 3 failed
12:33:22:359   15d8   GPU 3, GpuMiner cu_k1 failed 4, unspecified launch failure
12:33:22:234   45c   Set global fail flag, failed GPU1
12:33:22:374   45c   GPU 1 failed
12:33:22:249   740   Set global fail flag, failed GPU0
12:33:22:374   740   GPU 0 failed
12:33:22:391   15d8   GPU 3, GpuMiner kx failed 1
12:33:22:391   15d8   Set global fail flag, failed GPU3
12:33:22:391   15d8   GPU 3 failed
12:33:28:719   1b94   send: {"id":6,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x0", "0x00000000000000000000000000000000000000000000000000000000717c0a3e"]}

Super, it works. 6x570 ready and mining!!!

THX, THX, THX!!!

Yes, something wrong.

For cards that do not work as well as others, try the strap again. A few people have already said that Nitro+ 580 has much better results, I probably did not do a good strap.

Btw for all: on the wall = value from the meter in the socket, which contains 10% power loss, motherboard + cpu + disk consumption, little loss of cable resistance.

750w EVGA GQ - efficiency



Table of efficiency


160w on the wall = cca 17,6w psu loss = 142,4 - 119w per card = 23,4 system consum

However, my findings. Afterburner absolutely does not respond to the Sapphire voltage setting. That's why I have so bad consumption results. Afterburner writes about 115-119w on the card.

But for example, the MSI 570 Armor 4g responds perfectly , 95w / 27-28MHs. 130-135w on the wall. I need to fine-tune the afterburn settings or try the Sapphire trixx.

Yes after the first or second restart again 43. I will restore the patch and immediately new patch application. Then everything works fine. Now I've done 3 restarts behind and it's still working.

Let me know. I also solve the problem. My solution is 5x 570 + 2x 1060 gtx for now. 5x29MHs + 2x 23.5 MHs per rig, works fine.

4xx series 7gpu no problem run on Asus z270-A Prime or Asus Z270F Strix

5x5xx max. for now with atipat, Reading 570/580 thread.

I have tried all the options. But 6x570 does not work on any board. 6x, 7x, 8x 470 work fine but 570 no. So far it looks bug problem on drivers or Patcher.

If someone really works 6x 570/580 please write a detailed configuration including driver version etc ..

5x 570 is working reliably. For now.


https://www.monitortests.com/forum/Thread-AMD-ATI-Pixel-Clock-Patcher?pid=6655#pid6655

I have 1080 and 1070 on suprnova too.

1080 TDP 75% +420 mem - 510 sol on 0.3.3b - 135w per gpu - Gigabyte extreme gaming custom watercooled :-)

A few GPU tests Sapphire 5xx. A few successes, but one problem.

I use:

Asus Z270F Strix - Without any problems, 7 GPUs work or MSI Z270-A Pro 6 GPU ready, I have tried, I currently operate about 10 Rigs without problem (RX 4xx)

PolarisEditor by jaschaknack - https://github.com/jaschaknack/PolarisBiosEditor/tree/110aa3a5a0aeafe16bb0a96b53583e7e8e77999b
SRBPolaris - BIOS editor
AtiFlash 2,74
atikmdag-patcher-1.4.5
Wattool o.92 does not function


Sapphire 570 4GB Nitro+ Hynix - strap 1750 - 1100/2050/-96mv-gpu/+20powertarget = 29,3MHs @ cca 156 on the wall

Sapphire 570 8GB Nitro+ Hynix - Strap 1750 - 1100/2100/-96mvgpu/+30powertarget = 29,6MHs

Sapphire 570 4GB Pulse Elpida - strap 1750 - 1100/1910/-96mv-gpu/+30powertarget = 24MHs @ cca 150-160 on the wall

Sapphire 580 8 GB Pulse Hynix - strap 1750 - 1100/2150/-96mv-gpu/+30powetarget = 27,3MHs @ Here I do not know exactly, a little more than 570, No more than 170

Sapphire 570 4GB Mini Elpida - strap 1750 - 1110/2040/-96mvgpu/30+target = 26,3-26,4 @ 164w on the wall = 169 USD newegg very nice

Sapphire 580 8GB Nitro+ - Hynix - Strap 1750 - 1100/2200/-96mvGPU/50powertarget = 27,8MHs


Hynix on 570 is better then Hynix on 580. Hynix on 570 timing 7777 @ 1750 but 580 hynix 999 @ 1750 but i have to check this because the problem is two different time sets 1: 1750 and 2: 1750 each for another set of memories.


This is my tests, But I have a little problem. The signature for the modified bios driver is ok. But it does not work at the same time 570 with 580 on one motherboard.

If the 4x 570 works and re-sign the driver, the 580 runs but does not run 570.

Simply, it works either it or it. It does not work together.

Does anyone have any advice or idea?

Maybe a new Atipatcher?

Which versions? Armor or Gaming X

I have similar experience.

Sapphire 570 Nitro + 4GB - elpida - 24Mh, memory does not go even at 1850MHz, Polaris bios does not work

Sapphire 570 Pulse 4GB - hynix - 22MHs - the same case

Sapphire 580 8GB Pulse - Hynix - Memory timing is totally tragic, but it works by polaris editor, and strap 1750 and runs at 2150 = 27.3MHs - undervolt through afterburner - 175w on the wall on celeron 1151 skylake, Z270


My plan is to go to nVidia - I squeezed out of the cheapest 1060 3 GB stable 23.5MHs at 95-105w per card, 6x 1060 = 590-630 on the wall.

The Asus Z270-A Prime runs on a 7-card configuration. 7x1060 164MHs per RIG.

Soon, the gtx1060 version of the 9000 GHz memory will come out of it, maybe a little more.

I'm sorry you do not understand each other

I found the answer.

Don't need to modify anything !!
1) Make a fresh install delete old minerstat files !!
2) Just download edit the config.txt (there's an example for you in the website)
3) Run the node.exe

All of your config files will downloaded from the internet.
Settings -> Config Editor

SW download all config for all miner? Its good.


I have no problem or worry about security.

Sorry, maybe it's bad writing English.

I think update minerstats. MinerStats is in the zip/rar file. If you extract this file, rewrite config on the original folder.

This software is amazing, I have tried it and I would like him to put all his miningrigs but one thing I can not sleep. If the whole system is set up, all mining Client for all currencies, what happens when he comes update is somehow clear that the part is played to stay configs?

Hi,

try XMR (Monero), that's probably the best 750T but I do not expect miracles it's more for fun.

now (today) the best DCR look on http://whattomine.com/

Here is a link directly to your card, and you're down list.

http://whattomine.com/coins?utf8=%E2%9C%93&eth=true&factor%5Beth_hr%5D=0.5&factor%5Beth_p%5D=45.0&grof=true&factor%5Bgro_hr%5D=8.3&factor%5Bgro_p%5D=80.0&x11gf=true&factor%5Bx11g_hr%5D=2.0&factor%5Bx11g_p%5D=55.0&cn=true&factor%5Bcn_hr%5D=250.0&factor%5Bcn_p%5D=55.0&eq=true&factor%5Beq_hr%5D=75.0&factor%5Beq_p%5D=55.0&lre=true&factor%5Blrev2_hr%5D=6640.0&factor%5Blrev2_p%5D=70.0&ns=true&factor%5Bns_hr%5D=220.0&factor%5Bns_p%5D=75.0&lbry=true&factor%5Blbry_hr%5D=51.0&factor%5Blbry_p%5D=75.0&bk2bf=true&factor%5Bbk2b_hr%5D=350.0&factor%5Bbk2b_p%5D=75.0&bk14=true&factor%5Bbk14_hr%5D=610.0&factor%5Bbk14_p%5D=75.0&pas=true&factor%5Bpas_hr%5D=200.0&factor%5Bpas_p%5D=55.0&bkv=true&factor%5Bbkv_hr%5D=1140.0&factor%5Bbkv_p%5D=75.0&factor%5Bcost%5D=0.126&sort=Profitability24&volume=0&revenue=24h&factor%5Bexchanges%5D%5B%5D=&factor%5Bexchanges%5D%5B%5D=bittrex&factor%5Bexchanges%5D%5B%5D=bleutrade&factor%5Bexchanges%5D%5B%5D=btc_e&factor%5Bexchanges%5D%5B%5D=bter&factor%5Bexchanges%5D%5B%5D=c_cex&factor%5Bexchanges%5D%5B%5D=cryptopia&factor%5Bexchanges%5D%5B%5D=poloniex&factor%5Bexchanges%5D%5B%5D=yobit&dataset=Main&commit=Calculate&adapt_q_280x=3&adapt_q_380=0&adapt_q_470=8&adapt_q_480=8&adapt_q_750Ti=1&adapt_750Ti=true&adapt_q_10606=8&adapt_q_1070=2

I kind of played with wattool and polaris editor and I reached the next resulting.

6x + 470 Sapphire Nintro 8 gb
ASRock B85 ANNIVERSARY
Intel Pentium G3250T @ 2.8GHz

162-165 Mh / s on Claymore dual 8.1 @ 669 watts on the wall  

per card 27+

cca 101-103w per card, Others consume the rest of the system

gpu core 1050 / 820mV
mem samsung 2050 (strap 1625) 900mV

For me, the main energy saving and efficiency.

Hi all,

Can you suggest what is best for mine eth.

siacoin, DCR, pascal  

I try DCR but I finally switched on only eth, large increase in consumption and a small profit, perhaps siacoin is better?

I have 9x 470 low power bios

Look at this page. I Works with new drivers and modified BIOS.

https://www.techpowerup.com/228536/amd-bios-signature-check-re-enabled-with-relive-locks-out-polaris-bios-modders